SEARCH · Search NASA

Results for “Extensibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Sparsified Time-dependent PDEs FNO (STFNO) v1.0.0

STFNO (Sparsified Time-dependent PDEs FNO code) is an extension of the popular Fourier Neural Operator (FNO) architecture to the solution of coupled systems of time-dependent partial differential equations. STFNO leverages the sparsified dependencies on the field quantities based on the semi-discretiezed form of the PDEs, enabling significant reduction in the number of model parameters. STFNO has been extensively tested on two fusion simulation codes, NIMROD and GTC, and can be easily tailored to other systems of PDEs.

Rahman, Mustafa [Lawrence Berkeley National Labora↗

DOE OSTI2025

Subtropical Jet Regulates Arabian Winter Precipitation: A Viable Mechanism

The present study explores the mechanism governing wintertime (November–April) precipitation over the Arabian Peninsula (AP) using a 17-yr-long (2002–18) high-resolution WRF simulation. The composite analysis of strong precipitation events suggests that the equatorward extension of the upper-level jet together with the embedded upper-level trough creates a positive (cyclonic) midlevel vorticity and subsequently generates an anomalous lower-level convergence through Ekman pumping. This leads to the development of an anomalous surface low, which is further enhanced in the presence of the existing Red Sea trough over the AP. This surface low weakens the persistent anticyclone over the AP, shifting it further eastward to the Arabian Sea. The eastward shift in the lower-level anticyclone contributes to the transport of warm, moist air from the Arabian Sea and the Red Sea toward the AP. This warm, moist air converges with the cold and dry air advected by the midlatitude jet and creates a moisture convergence zone, leading to the initiation of convection. We test the proposed mechanism through numerical experiments with modified upper-level wind and demonstrate that a strong, southward intrusion of the jet can indeed lead to precipitation over the AP. The above mechanism also explains the interannual variability of precipitation over the AP. During wet years, we notice approximately 3 m s -1 stronger jet core magnitude and about a 2° equatorward shift of the jet compared to dry years. While the equatorward extension of the jet explains about 21% of the interannual variability, the jet magnitude explains around 7% of the variability during wet years.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Demographic drivers of gut microbiome diversity

Abstract The gut microbiome plays a central role in orchestrating metabolic, immune, and neurological functions essential for human health. While extensive research has explored the effects of diseases and pathological conditions on gut microbiome composition, the influence of demographic factors remains underexplored, limiting our understanding of microbiome variations in disease states. This study addresses this gap by investigating the impact of demographic variables, including age, sex, and geography, on gut microbiome diversity in healthy individuals. Using the American Gut Project’s extensive dataset and the QIIME2 bioinformatics pipeline, we conducted a comprehensive analysis of microbial profiles across diverse demographic groups. Our results revealed significant age-related shifts in microbial richness and composition, and geographic location strongly influenced phylogenetic diversity. In contrast, sex exhibited limited impact on microbial diversity within healthy BMI ranges. These findings highlight the critical role of demographic factors in shaping gut microbiome diversity, providing a foundational framework to better contextualize disease-related microbiome variations and advance personalized healthcare approaches.

Biotechnology & Applied Microbiology↗

DOE OSTI2026

Data for A Hybrid Biophysical-Machine Learning Framework for Diurnal Surface Energy Flux Estimation Using Proximal Sensing

Thermal infrared-based remote sensing of surface energy fluxes has traditionally relied on high spatial resolution satellite data with revisit frequencies on the order of weeks. In this study, we evaluate a biophysics-based analytical surface energy balance model for predicting latent energy (LE) and sensible heat (H) fluxes using proximal sensing observations. The Surface Temperature Initiated Closure (STIC1.2) model has been extensively validated across a wide range of spatial and temporal scales using various satellite-derived thermal infrared data sets. Here we extend this validation by applying STIC at sub-hourly temporal resolution over multiple growing seasons for four distinct agricultural systems. We further develop and evaluate novel STIC variants that incorporate machine learning (ML) techniques to eliminate the need for surface energy balance observations, specifically net radiation and soil heat flux, thereby enhancing model applicability in data-sparse settings. The integration of a ML component to estimate surface available energy is shown to have strong predictive performance for both LE (R2 = 0.81–0.94) and H (R2 = 0.46–0.72) across all agricultural systems examined here, demonstrating the potential of hybrid biophysical-machine learning approaches for surface energy balance modeling with minimal data requirements. This study concludes with a novel application of explainable machine learning (exML) to diagnose sources of model error. This exML framework attributes residual prediction errors to both model input variables and environmental drivers not explicitly included in the simulation experiments. This approach provides a new pathway for improving model design and integrating previously overlooked yet influential variables into future model iterations.

AI/ML↗

DOE OSTI2026

Data for Genetic Variation in Zea mays Influences Microbial Nitrification and DeNitrification in Conventional Agroecosystems

Nitrogenous fertilizers provide a short-lived benefit to crops in agroecosystems, but stimulate nitrification and denitrification, processes that result in nitrate pollution, N2O production, and reduced soil fertility. Recent advances in plant microbiome science suggest that genetic variation in plants can modulate the composition and activity of rhizosphere N-cycling microorganisms. Here we attempted to determine whether genetic variation exists in Zea mays for the ability to influence the rhizosphere nitrifier and denitrifier microbiome under “real-world” conventional agricultural conditions. To capture an extensive amount of genetic diversity within maize we grew and sampled the rhizosphere microbiome of a diversity panel of germplasm that included ex-PVP inbreds ( Z. mays ssp. mays ), ex-PVP hybrids ( Z. mays ssp. may s), and teosinte ( Z. mays ssp. mexicana and Z. mays ssp. parviglumis ). From these samples, we characterized the microbiome, a suite of microbial genes involved in nitrification and denitrification and carried out N-cycling potential assays. Here we are showing that populations/genotypes of a single species can vary in their ecological interaction with denitrifers and nitrifers. Some hybrid and teosinte genotypes supported microbial communities with lower potential nitrification and potential denitrification activity in the rhizosphere, while inbred genotypes stimulated/did not inhibit these N-cycling activities. These potential differences translated to functional differences in N2O fluxes, with teosinte plots producing less GHG than maize plots. Taken together, these results suggest that Zea genetic variation can lead to changes in N-cycling processes that result in N leaching and N2O production, and thereby are selectable targets for crop improvement. Understanding the underlying genetic variation contributing to belowground microbiome N-cycling into our conventional agricultural system could be useful for sustainability.

Nitrogen↗

DOE OSTI2026

Data for Rewiring Yeast Metabolism for Producing 2,3-Butanediol and Two Downstream Applications: Techno-Economic Analysis and Life Cycle Assessment of Methyl Ethyl Ketone (MEK) and Agricultural Biostimulant Production

Rising concerns for sustainability and global climate change have driven the development of sustainable production pathways for biofuels and chemicals from lignocellulosic biomass via integrated biological and chemical processes. We constructed an engineered Saccharomyces cerevisiae capable of producing 2,3-butanediol (2,3-BDO) from glucose without accumulating ethanol and glycerol, which hinder downstream processing of 2,3-BDO, through extensive metabolic reprogramming. Specifically, we introduced heterologous 2,3-BDO biosynthetic enzymes and deleted the major isozymes of ethanol and glycerol biosynthetic enzymes. In addition, we introduced an NAD+ regenerating Pyruvate-Malate (PM) cycle and enhanced the NAD+ regenerating capability of the PM cycle to resolve the redox imbalance from the deletion of ethanol and glycerol production pathways. The resulting engineered yeast produced 109.9 g/L of 2,3-BDO with a productivity of 1.0 g/L/h and a yield of 0.36 g/g glucose in a fed-batch fermentation. We also conducted techno-economic analysis (TEA) and life cycle assessment (LCA) of the production of methyl ethyl ketone (MEK) through catalytic dehydration of 2,3-BDO. A TEA based on the experimental results indicated that the minimum product selling price (MPSP) was estimated to be $1.90/kg. Regarding cradle-to-grave LCA, 100-year global warming potential (GWP100) and fossil energy consumption (FEC) were found to be 0.37 kg CO2 eq/kg and 3.1 MJ/kg, respectively. These results demonstrated the feasibility of cost-competitive and sustainable bio-based MEK production via yeast fermentation. In addition, we explored the possibility of using the fermentation broth containing 2,3-BDO as a biostimulant inducing drought tolerance in plants. As a result, the yeast 2,3-BDO fermentation broth can induce drought tolerance in Arabidopsis thaliana without a complicated purification process.

Economics↗

DOE OSTI2024

IDAES-PSE 2.5.0 Release

The Institute for the Design of Advanced Energy Systems (IDAES) Integrated Platform is a versatile computational environment offering extensive process systems engineering (PSE) capabilities for optimizing the design and operation of complex, interacting technologies and systems. IDAES enables users to efficiently search vast, complex design spaces to discover the lowest cost, most environmentally sustainable solutions while supporting the full process modeling lifecycle, from conceptual design to dynamic optimization and control. The extensible, open platform empowers users to create models of novel processes and rapidly develop custom analyses, workflows, and end-user applications. IDAES-PSE 2.5.0 Release Highlights Upcoming Changes IDAES will be switching to the new Pyomo solver interface in the next release. Whilst this will hopefully be a smooth transition for most users, there are a few important changes to be aware of. The new solver interface uses a different version of the IPOPT writer (“ipopt_v2”) and thus any custom configuration options you might have set for IPOPT will not carry over and will need to be reset. By default, the new Pyomo linear presolver will be activated with ipopt_v2. Whilst are working to identify any bugs in the presolver, it is possible that some edge cases will remain. IDAES will begin deploying a new set of scaling tools and APIs over the next few releases that make use of the new solver writers. The old scaling tools and APIs will remain for backward compatibility but will begin to be deprecated. New Models, Tools and Features New diagnostics check for near-parallel variables and constraints. New diagnostics tools for identifying causes of infeasibility in models. New example for creating a custom model of a liquid-liquid extractor unit operation. Bug Fixes Fixed bug in Gibbs reactor that caused it to appear to have additional spurious degrees of freedom. Fixed bug in the Modular Property Framework that would cause errors when trying to use phase-based material balances with phase equilibria. Fixed bug in Modular Properties Framework that caused errors when initializing models with non-vapor-liquid phase equilibria. Testing and Robustness Deployed the IDAES Diagnostics Toolbox to confirm that there are no structural or numerical issues in the core model libraries. Additional robustness tests for core model, and some associated improvements in the converge tester class. Fixed a number of issues that were causing unexpected warnings to be emitted during testing. Deprecations and Removals Removed examples for RIPE tool which has not been supported for a number of releases.

AS↗

DOE OSTI2025

IDAES-PSE 2.8.0 Release

AS↗

DOE OSTI2026

RegularizedOptimization.jl: A Julia framework for regularized and nonsmooth optimization

RegularizedOptimization.jl is a Julia package that implements families of quadratic regularization and trust-region methods for solving the nonsmooth optimization problem $^{\textrm{minimize}}_{𝑥∈ℝ^𝑛}$ 𝑓(𝑥) + ℎ(𝑥) subject to 𝑐(𝑥) = 0, (1) where 𝑓 ∶ ℝ 𝑛 → ℝ and 𝑐 ∶ ℝ 𝑛 → ℝ 𝑚 are continuously differentiable, and ℎ ∶ ℝ 𝑛 → ℝ∪{+∞} is lower semi-continuous. The nonsmooth objective ℎ can be a regularizer, such as a sparsity inducing penalty, model simple constraints, such as 𝑥 belonging to a simple convex set, or can be a combination of both. All 𝑓, ℎ, and 𝑐 can be nonconvex. RegularizedOptimization.jl provides a modular and extensible framework for solving (1), and developing novel solvers. Currently, the following solvers are implemented: • Trust-region solvers TR and TRDH (Aravkin et al., 2022; Leconte & Orban, 2025) • Quadratic regularization solvers R2, R2DH and R2N (Aravkin et al., 2022; Diouane, Habiboullah, et al., 2024) • Levenberg-Marquardt solvers LM and LMTR (Aravkin et al., 2024) used when 𝑓 is a least-squares residual. • Augmented Lagrangian solver AL (De Marchi et al., 2023). All solvers rely on first derivatives of 𝑓 and 𝑐, and optionally on their second derivatives in the form of Hessian-vector products. If second derivatives are not available, quasi-Newton approximations can be used. In addition, the proximal mapping of the nonsmooth part ℎ, or adequate models thereof, must be evaluated. At each iteration, a step is computed by solving a subproblem of the form (1) inexactly, in which 𝑓, ℎ, and 𝑐 are replaced with appropriate models around the current iterate. The solvers R2, R2DH, and TRDH are particularly well suited to solve the subproblems, though they are general enough to solve (1). All solvers are allocation-free, so re-solves incur no additional allocations. To illustrate our claim of extensibility, a first version of the AL solver was implemented by an external contributor. Furthermore, a nonsmooth penalty approach, described in Diouane, Gollier, et al. (2024), is currently being developed, that relies on the library to efficiently solve the subproblems.

Gollier, Maxence [Polytechnique Montréal, QC (Cana↗

DOE OSTI2024

Theories of homogeneous and electrochemical electron transfer in complex media and interfaces (Final Technical Report)

This project makes the next step in establishing practical theories of charge transfer in complex media. The development of formal models is supported by extensive atomistic simulations, quantum calculations of force-field parameters, and direct measurements of charge-transfer spectra. All theory development is supported by experiment, extensive numerical simulations, and through external collaborations.

14 SOLAR ENERGY↗

DOE OSTI2024

Study of the Neutrino Magnetic Moment with the NOvA Near Detector

Predicted by the Standard Model as theoretical, massless particles, neutrinos have been the subject of many experiments since their first detection. It is now experimentally confirmed that neutrinos do have mass necessitating an extension to the Standard Model. Such an extension allows for other surprising neutrino properties, such as a neutrino magnetic moment. While neutrinos are observed to be neutral and do not couple to photons at leading order, higher order expansion of the interaction allows for coupling to the photon to occur and gives rise to a neutrino magnetic moment through quantum loop effects. This is a useful property for studying the Dirac or Majorana nature of neutrinos, as the predicted value of the magnetic moment would differ. This talk focuses on an introduction to the neutrino magnetic moment as well as discusses the current status of work being done on NOvA utilizing the Near Detector to obtain an upper limit on the neutrino magnetic moment value.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Optimizing DOE Opportunities to Research Land–Atmosphere Interactions in the U.S. Southeast (Workshop Report)

The southeastern United States (Southeast), with its complex and varied environments, is an area of tremendous economic, ecological, and societal importance to the country. The region is characterized by heterogeneous landscapes (i.e., geology and soil type) and a long history of human land use coupled with a warm temperature regime and high precipitation. As a result, soil erosion and deposition are pronounced, vegetation recovery is rapid, and human modification is extensive across the region. To better understand land–atmosphere interactions in this important and complex region, research communities supported by the U.S. Department of Energy’s Biological and Environmental Research (BER) program identified the Southeast as a priority region of interest. In fall 2024, the third Atmospheric Radiation Measurement Mobile Facility (AMF3), one of three mobile monitoring facilities designed to collect atmospheric and climate data from undersampled regions around the world, will begin operations in northwestern Alabama’s Bankhead National Forest (BNF). The AMF3-BNF 5-year deployment, from 2024–2029, will monitor the effects of feedbacks among aerosols, clouds, and precipitation on plant physiology and canopy-scale fluxes. It will also focus on scale aggregation to resolve the role of local forcing on larger-scale processes. To enable broader AMF3 involvement by the science community, the BER Environmental System Science (ESS) program organized the Southeast Land– Atmosphere Research Opportunities (SELARO) workshop in August 2023. The purpose was to identify gaps in scientific understanding of terrestrial processes in the Southeast (defined as states bounded by the Gulf of Mexico to the south, the Atlantic Ocean to east, the Mississippi River to the west, and extending through Tennessee and North Carolina to the north) and explore opportunities to use the AMF3-BNF deployment to coordinate and leverage research efforts across the region. Many parts of the Southeast have experienced repeated anthropogenic forcings. Farming, hunting, burning, and settlement of the region by Indigenous Peoples first shaped the distribution of plant communities, which in turn influenced European colonization patterns. Timber harvesting was common during the expansion of European settlements, and production forestry continues today. Agricultural production was extensive and then waned through the 20th century, creating a period of afforestation following agricultural abandonment. Today, many formerly agricultural landscapes are undergoing rapid urbanization and suburbanization. Overlying these patterns of anthropogenic land use are frequent disturbances from hurricanes, tornadoes, wildfires, drought, flooding, ice storms, and the occasional blizzard. An additional characteristic of the Southeast is its overall landscape complexity. Unlike the western United States, where broad expanses may share similar characteristics, Southeast topography, drainage patterns, vegetation, and development patterns vary widely across relatively small spatial scales (<1 km). This is due to the region’s underlying geology and soil development, species biodiversity patterns, and land ownership and use coupled with strong forces of erosion, weathering, and rapid plant growth in the warm, wet climate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Examining Graphite Degradation in Molten Salt Environments: A Chemical, Physical, and Material Analysis

Molten-salt reactors (MSRs) are Generation IV nuclear reactors that use liquid salt as a coolant and/or fuel. In several MSR designs, graphite serves as a moderator and/or reflector. However, due to limited experimental data and operational experience, our understanding of graphite behavior in molten salt environments remains incomplete. This report aims to identify the degradation mechanisms of nuclear graphite in MSRs, detail the mechanisms of each factor, and provide an initial assessment of their impact on the structural integrity of graphite components. This assessment is based on an extensive literature review and insights from subject matter experts. Furthermore, given the limited data, a modeling strategy using existing Grizzly software is proposed for a more thorough analysis where appropriate. Additionally, it presents mitigation strategies where applicable. The report covers physical degradation mechanisms such as infiltration, erosion, and abrasion, as well as chemical degradation mechanisms including fluorination, intercalation, corrosion, and oxidation. Molten salt can infiltrate the porous structure of graphite, leading to several detrimental effects. Entrapment of fissile products within the graphite pores can cause radiation damage and could pose challenges in the handling and disposal of contaminated components. The differential thermal expansion between the infiltrated salt and graphite, along with internal stress from pressurized molten salt and volumetric heating, can compromise the structural integrity of graphite. To mitigate these effects, employing ultra-fine graphite grades and applying sealants and coatings are effective strategies. A computational model based on coupled solid mechanics and heat transfer phenomena could be used to predict the internal stresses using Grizzly software. In pebble-bed MSRs, graphite fuel pebbles can cause abrasion against reactor components due to friction and wear. The severity of wear is influenced by various factors such as temperature, environment, and the presence of lubricants. Tribological studies reveal that higher temperatures and molten salt environments, such as FLiBe, significantly reduce wear rates compared to dry conditions. Additionally, the chemical composition of the salt can further optimize graphite's tribological performance. Long-term wear effects can be modeled by incorporating surface defects into the geometry and predict stresses under thermal and radiation effects using Grizzly software. Chemical degradation of graphite in a molten salt environment can occur through fluorination and intercalation. Fluorination can occur via replacement of hydrogen or oxygen atoms, or at the active sites, but does not cause structural degradation. Intercalation, on the other hand, can lead to exfoliation, where layers of graphite separate and peel away, damaging the graphite. Protective coatings can enhance graphite's resistance to intercalation. Graphite generally exhibits good chemical stability in molten salt environments, though it can corrode under specific conditions, particularly in the presence of impurities or oxidants. Studies have shown that protective coatings, such as plasma-sprayed partially stabilized zirconia (PSZ), can effectively prevent such degradation. Corrosion behavior varies significantly with different graphite grades and coating applications, underscoring the need for detailed studies on uncoated and coated graphite to understand and mitigate corrosion mechanisms in MSRs. Research indicates that the presence of oxidants and impurities can accelerate graphite degradation in molten salts, making it essential to explore acceptable impurity limits. Oxidation is another critical degradation mechanism, leading to weight loss and structural damage due to the formation of CO and CO 2 from the reaction of carbon atoms with oxygen. This process creates new porosity and compromises graphite's integrity. While extensive research on graphite oxidation has been conducted for gas-cooled reactors, studies specific to MSRs are limited. Findings from the coal industry suggest that molten alkali metal salts can significantly accelerate graphite oxidation, a hypothesis worth exploring for fluoride salts in MSRs. Understanding oxidation behavior in MSRs is vital for developing protective measures. The analysis of post-irradiated graphite from the MSRE experiment demonstrated exceptional chemical compatibility with molten fluoride salt, suggesting that the extent of chemical attack on graphite largely depends on the salt's infiltration capability. Therefore, the use of ultra-fine grade graphite could help mitigate chemical degradation effects. Existing oxidation modeling capabilities in Grizzly, which use reaction-diffusion equations to model graphite-air interactions, could be adapted to simulate the chemical degradation effects of graphite in molten salt environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

OPEN-Augmented Reality GUI for Bioenergy Crop Phenotyping and Precision Agriculture (Donald Danforth Plant Science Center Final Scientific Technical Report)

The project led by the Donald Danforth Plant Science Center, in collaboration with Arizona State University, George Washington University, and Saint Louis University, has made significant strides in advancing the phenotypic analysis of bioenergy crops through the development of an innovative AI processing pipeline. This initiative was primarily funded by ARPA-E, with additional cost-sharing provided by the participating institutions. The project successfully utilized a variety of sensors—3D scanners, thermal, RGB, and hyperspectral—to refine algorithms for data-driven trait signature identification and improve the classification and visualization of plant traits. The developed AI processing pipeline is capable of handling the complex, multidimensional data characteristic of dynamic agricultural environments. 1) Contributions to understanding: The research has advanced the field of plant phenomics by showcasing the synergistic use of various sensor data to enhance the precision of trait analysis in bioenergy crops. Through the integration of 3D scanners, thermal, RGB, and hyperspectral sensors, the project has developed robust data-driven trait signature algorithms and visualization techniques. These innovations have facilitated detailed monitoring and management of plant traits, providing vital insights into plant growth dynamics and stress responses. Further, the project has broadened our understanding of how machine learning can be effectively applied in multi-sensor environments to refine trait analysis. By leveraging diverse datasets, the research has not only improved the accuracy of phenotypic assessments but also established a versatile methodological framework that can be extended beyond agriculture to other fields requiring detailed phenotypic analysis. 2) Technical effectiveness and economic feasibility: The AI processing pipeline developed in this project demonstrated significant technical effectiveness, achieving high throughput analysis of extensive phenotypic data and meeting targeted accuracies. This system exemplified the capability of advanced machine learning technologies to efficiently manage and analyze large, complex datasets. Economically, the implementation of the project-developed pipelines may offer substantial cost savings across multiple sectors. It enhances data analysis processes and significantly reduces the need for manual data interpretation, thereby decreasing both the time and resources required. 3) Public benefit: The project has significantly broadened the scope of agricultural methodologies to enhance phenotypic analysis, with potential applications in various sectors beyond agriculture. Additionally, the initiative fostered an enriching educational and collaborative environment, significantly enhancing the technical skills of participants. It also made substantial contributions to the scientific community by providing open-access data sets and tools, encouraging ongoing research and development across various disciplines. Overall, the project not only met its scientific goals but also showcased the extensive utility of integrating advanced machine learning and sensor data analysis technologies. These advancements have proven instrumental in driving forward both theoretical research and practical applications, setting a strong foundation for future explorations and innovations in data-driven science.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Jurassic deserts and CO2 sequestration: the Glen Canyon Group in Utah, western USA

The Early Jurassic in the Western Interior of USA consisted of an extensive desert environment, including one of the largest ergs in geologic history. The Navajo erg has been estimated to extend as much as 2.2 million square kilometers, though the preserved extent is somewhat smaller. The Mesozoic was a global greenhouse phase, and during the Jurassic this region experienced fluctuations in climate aridity, reflected in the depositional environment. In addition to extensive dunefields, interdune deposits (lakes and oases) and fluvial systems are also documented within formations of the Glen Canyon Group. The Navajo Sandstone has received much attention as a potential CO2 injection target in recent years. It consists of thick, aeolian sandstones with high porosity and permeability, occurs in both outcrop and subcrop, and has industry data. Mapping of stratigraphic and sedimentologic changes within the Navajo Sandstone has been undertaken in localized areas, however piecing together these studies and developing regional models for CO2 potential has not received as much attention. There is significant industry data across Utah, and utilizing this data to pivot from a focus on hydrocarbon extraction to CO2 injection is an effective way to move forward with green energy, and to meet carbon neutral emission goals. Using legacy well data, we are developing a more comprehensive study of the Navajo Sandstone as a potential CO2 reservoir, in addition to identifying other zones of interest within the Glen Canyon Group, and improving understanding of stratigraphic complexity within one of the most significant aeolian systems in the world.

Mahon, Elizabeth↗

DOE OSTI2025

Southwest Regional Partnership on Carbon Sequestration: Phase III (Final Scientific/Technical Report)

The Southwest Regional Partnership on Carbon Sequestration (SWP) is one of 7 regional partnerships formed in 2003 under the U.S. Department of Energy’s (DOE) Regional Carbon Sequestration Partnerships (RCSPs) initiative. The overall purpose of the initiative was to help determine and implement the technology, infrastructure, and regulations most appropriate to promote carbon storage in different regions of the country. Covering Arizona, Colorado, New Mexico, Oklahoma, Utah, and parts of Texas, Wyoming, and Kansas, the SWP evaluated regional carbon storage and utilization potential and focused on technologies and sites that could complement the region’s strong position in energy production. The project progressed through three phases: • Phase I (2003–2005): Characterized regional geologic formations and CO 2 sources, assessed sequestration potential, and identified pilot test sites. • Phase II (2005–2013): Conducted small-scale field tests to validate sequestration methods, including geologic and terrestrial projects. • Phase III (2008–2022): Demonstrated large-scale CO 2 injection at a commercial oil field to test monitoring, verification, and long-term storage strategies. This report covers Phase III. The final project site, the Farnsworth Unit (FWU) in Texas, provided real-world testing of reservoir characterization, monitoring, and risk evaluation tools and processes that could be used in any commercial scale carbon capture, utilization, and storage (CCUS) project. Extensive data collection and analysis helped refine best practices for reservoir characterization, injection monitoring, and storage verification. The SWP contributed to national databases, DOE best practice manuals, and regional geological assessments to support future sequestration efforts. Key lessons learned include the importance of robust data management, strategic site selection, regulatory navigation, and effective industry collaboration. The project’s findings will inform ongoing and future carbon storage initiatives. Task 1 (Regional Characterization) • The SWP continued to participate in national outreach efforts and NATCARB. • The SWP evaluated multiple potential sites before selecting the FWU as the primary field test location. Task 2 (Public Outreach and Education) • The SWP contributed to national databases, DOE best practice manuals, and regional geological assessments to support future sequestration efforts. Task 3 (Permitting and Regulatory Compliance) • The SWP ensured compliance with federal and state regulations, including National Environmental Policy Act (NEPA) requirements. • The SWP obtained all necessary permits for drilling, injection, and monitoring activities. Task 4 (Site Characterization and Planning) • The SWP developed work plans for four key activities: characterization, simulation, monitoring and verification, and risk evaluation. • The SWP collected and synthesized legacy data from multiple sources to build initial static geological models and dynamic reservoir models demonstrating project feasibility. • The SWP conducted an initial risk evaluation and developed mitigation plans. Task 5 (Field Operations and Data Collection) • The SWP drilled, logged, and cored three characterization wells to gather critical subsurface data. • The SWP conducted multiple geophysical surveys, including 3D seismic, crosswell seismic, and vertical seismic profiling, to improve reservoir characterization. Task 6 (Monitoring and Verification) • The SWP performed extensive geological characterization using data from characterization wells and seismic surveys. • The SWP established a surface monitoring network to track CO 2 flux in soil gas, groundwater chemistry, and near-surface atmospheric CO 2 levels. • The SWP built and refined reservoir models to study the effects of relative permeability on simulation behavior and improve calibration with experimental data. Task 7 (Risk Assessment and Model Refinement) • The SWP conducted multiple studies to evaluate reservoir integrity, predict CO 2 plume behavior and improve predictive modeling capabilities. • The SWP refined geological models and used them to enhance the accuracy of simulation models. • The SWP continued quantitative risk assessment of top-ranked risks and strengthened the link between qualitative and quantitative risk methodologies.

02 PETROLEUM↗

DOE OSTI2025

Modeling of Stress and Temperature Effects on Creep of Reduced Activation Ferritic-Martensitic Steel Alloy F82H (Tertiary Creep Modeling of RAFM Steel)

A Bayesian optimization procedure is presented for calibrating a multi-mechanism micromechanical model for creep to experimental data of F82H steel. Reduced activation ferritic martensitic (RAFM) steels based on are the most promising candidates for some fusion reactor structures. Although there are indications that RAFM steel could be viable for fusion applications at temperatures up to 600 °C, the maximum operating temperature will be determined by the creep properties of the structural material and the breeder material compatibility with the structural material. Due to the relative paucity of available creep data on F82H steel compared to other alloys such as Grade 91 steel, micromechanical models are sought for simulating creep based on relevant deformation mechanisms. As a point of departure, this work recalibrates a model form that was previously proposed for Grade 91 steel to match creep curves for F82H steel. Due to the large number of parameters (9) and cost of the nonlinear simulations, an automated approach for tuning the parameters is pursued using a recently developed Bayesian optimization for functional output (BOFO) framework [1]. Incorporating extensions such as batch sequencing and weighted experimental load cases into BOFO, a reasonably small error between experimental and simulated creep curves at two load levels is achieved in a reasonable number of iterations. Validation with an additional creep curve provides confidence in the fitted parameters obtained from the automated calibration procedure to describe the creep behavior of F82H steel at 600 °C. The model is further extended using a temperature dependent scaling law approach to simulate creep response between 550 °C and 650 °C. The efficacy of this extension is compared with the previously used scaling law approach for Grade 91 steel.

36 MATERIALS SCIENCE↗

DOE OSTI2025

A Combined Water and CO 2 Direct Air Capture System (Final Technical Report)

The primary objective of the project was to demonstrate the technical and economic performance of a technology that simultaneously captures CO 2 and water from the air – a Hybrid Direct Air Capture system (HDAC). In HDAC, air is passed over water capture section as well as a CO 2 selective sorbent to remove CO 2 from the air stream. Combining potable water generation and CO 2 capture in a single device with the unique energy conserving features of the proposed design enables long-term projected CAPEX under $\$$750/t-CO 2 and levelized cost of capture (LCOC) of $\$$140/t-CO 2 . Project DE-FE-0031970 "A Combined Water and CO 2 Direct Air Capture System" ran for four years and three months from 10/01/2020 to 12/31/2024 for three budget periods and an extension period. The total project budget at completion was $\$$3,534,408 consisting of a $\$$2,680,064 federal share and $\$$854,344 cost share. The pilot plant was successfully designed, engineered, built and commissioned during the initial three budget periods. The plant demonstrated successful water capture during this period, whereas initial CO 2 capture was well below target values. The project team requested an extension period during which alternate materials and beds were evaluated. By the end of the project, both moisture swing adsorption of CO 2 and water capture had successfully been demonstrated at target capture rates making further scale-up of the technology viable.

42 ENGINEERING↗