Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETIC RESONANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Estimation of the superhigh-frequency magnetic permeability of alsifer from the measured permeability of composites

The magnetic permeability of alsifer was restored from the frequency dependences of the dielectric and magnetic permeabilities of powder alsifer (AlSiFe alloy)–wax matrix composites. The permeabilities were measured using the coaxial line technique within a frequency range of 0.05–20 GHz. The effect of the concentration, shape, and size of powder particles on the microwave magnetic properties of composites was considered. A good agreement between the measurement results and the Maxwell–Garnett formula generalized with consideration for the particle shape, the percolation threshold, and the skin-effect was obtained. The found sizes of particles agreed with electron microscopy and granulometry data. Both the frequency and the ferromagnetic resonance line figure of merit (FOM) for lamellar particles proved to be higher than for spherical ones. Alsifer powders were shown to be promising fillers for radioabsorbing materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin current transport in ceramic: TiN thin film

The spin current transport property in a ceramic material TiN has been investigated at room temperature. By attaching TiN thin films on Ni{sub 20}Fe{sub 80} with different thicknesses of TiN, the spin pumping experiment has been conducted, and the spin diffusion length in TiN was measured to be around 43 nm. Spin-torque ferromagnetic resonance has also been taken to investigate the spin Hall angle of TiN, which was estimated to be around 0.0052. This study on ceramic material provides a potential selection in emerging materials for spintronics application.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Y{sub 3}Fe{sub 5}O{sub 12} spin pumping for quantitative understanding of pure spin transport and spin Hall effect in a broad range of materials (invited)

Using Y{sub 3}Fe{sub 5}O{sub 12} (YIG) thin films grown by our sputtering technique, we study dynamic spin transport in nonmagnetic, ferromagnetic, and antiferromagnetic (AF) materials by ferromagnetic resonance spin pumping. From both inverse spin Hall effect and damping enhancement, we determine the spin mixing conductance and spin Hall angle in many metals. Surprisingly, we observe robust spin conduction in AF insulators excited by an adjacent YIG at resonance. This demonstrates that YIG spin pumping is a powerful and versatile tool for understanding spin Hall physics, spin-orbit coupling, and magnetization dynamics in a broad range of materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modulation of effective damping constant using spin Hall effect

We have investigated modulation of the effective damping constant α{sub eff} via spin currents through the spin Hall effect for Permalloy/Pt bilayer films with various thicknesses. The observed linear and sinusoidal dependences of current density and field direction on α{sub eff} are in agreement with the analytical model. By comparing the thickness dependence of spin Hall angle obtained from the damping modulation with that previously obtained by spin-torque-induced ferromagnetic resonance, we show that there is no clear extrinsic contribution in the present method. We also show the large modulation of the effective damping constant (down to ∼20%) in the high-current-density region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic anisotropy in ultrathin Fe films on GaAs, ZnSe, and Ge (001) substrates

We discuss magnetic anisotropy parameters of ferromagnetic body-centered cubic (bcc) Fe films grown by molecular beam epitaxy (MBE) on (001) substrates of face-centered cubic (fcc) GaAs, ZnSe, and Ge. High-quality MBE growth of these metal/semiconductor combinations is made possible by the fortuitous atomic relationship between the bcc Fe and the underlying fcc semiconductor surfaces, resulting in excellent lattice match. Magnetization measurements by superconducting quantum interference device (SQUID) indicate that the Fe films grown on (001) GaAs surfaces are characterized by a very strong uniaxial in-plane anisotropy; those grown on (001) Ge surfaces have a fully cubic anisotropy; and Fe films grown on ZnSe represent an intermediate case between the preceding two combinations. Ferromagnetic resonance measurements carried out on these three systems provide a strikingly clear quantitative picture of the anisotropy parameters, in excellent agreement with the SQUID results. Based on these results, we propose that the observed anisotropy of cubic Fe films grown in this way results from the surface reconstruction of the specific semiconductor substrate on which the Fe film is deposited. These results suggest that, by controlling surface reconstruction of the substrate during the MBE growth, one may be able to engineer the magnetic anisotropy in Fe, and possibly also in other MBE-grown ferromagnetic films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mutual influence between macrospin reversal order and spin-wave dynamics in isolated artificial spin-ice vertices

In this paper, we theoretically and experimentally investigate magnetization reversal and associated spin-wave dynamics of isolated threefold vertices that constitute a Kagome lattice. The three permalloy macrospins making up the vertex have an elliptical cross section and a uniform thickness. We study the dc magnetization curve and the frequency versus field curves (dispersions) of those spin-wave modes that produce the largest response. We also investigate each macrospin reversal from a dynamic perspective, by performing micromagnetic simulations of the reversal processes, and revealing their relationships to the soft-mode profile calculated at the equilibrium state immediately before reversal. The theoretical results are compared with the measured magnetization curves and ferromagnetic resonance spectra. Finally, the agreement achieved suggests that a much deeper understanding of magnetization reversal and accompanying hysteresis can be achieved by combining theoretical calculations with static and dynamic magnetization experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunnel anisotropic magnetoresistance in CoFeB|MgO|Ta junctions

We found that CoFeB|MgO|Ta tunnel junctions exhibit tunnel anisotropic magnetoresistance (TAMR) at room temperature. The tunnel junctions exhibit positive magnetoresistance with the application of a magnetic field normal to the film plane. The dependencies on the applied magnetic field angle and MgO thickness reveal that the magnetoresistance originates from the TAMR, caused by the spin polarization and the spin-orbit interaction at the CoFeB|MgO interface. We also found that the TAMR can be used to detect ferromagnetic resonance in the CoFeB. This detection method could be useful for the characterization of nanomagnets that are free from the spin-transfer effect and the stray field of a reference layer, unlike conventional magnetic tunnel junctions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of interelement dipole coupling in patterned ultrathin single crystal Fe square arrays

The correlation between the magnetic properties and the interelement separation in patterned arrays of ultrathin single crystal Fe films of 12 monolayers (ML) grown on GaAs(100) has been studied. The critical condition to form single domain remanent states in the square elements was found to be 10 {mu}m in size and 20 {mu}m for the interelement separation. The coercivity was also found to increase with the increasing interelement separation in the patterned arrays. These results are attributed to the competition between the large in-plane uniaxial anisotropy, the demagnetizing field, and interelement dipole coupling as determined semiqualitatively by the ferromagnetic resonance measurements.

36 MATERIALS SCIENCE↗

Magnetic properties of lithium zinc ferrites synthesized by microwave sintered method

In this paper, a series of polycrystalline ferrite samples were prepared with the composition of Zn{sub 0.1}Li{sub 0.525-x}Ti{sub 0.15}Mg{sub x}Fe{sub 2.225-0.5x}O{sub 4} (LiZn) (x=0, 0.05, 0.10, 0.15 and 0.20) using both microwave sintering (MS) and conventional sintering (CS) technologies, respectively. The sintering time and temperature were 22 hours and 1000°C for the CS process, and 2 hours and 880°C for the MS process. Experiments showed that the MS treated LiZn ferrites exhibited more excellent magnetic properties and denser, more uniform micro-structures comparing with the ones treated by CS method. For the LiZn ferrite (x=0.1) sintered at 880°C using MS, the saturation magnetic induction (Bs) is 242.3 mT, the coercive force (Hc) is 135 A/m, the square ratio (Br/Bs) is 0.87 and the ferromagnetic resonance line-width (Δ H) is 143.2 Oe. These results represented very good properties for an X-band phase shifter material and indicated that the MS method is a potentially important technique for fabricating low temperature co-fired ceramics (LTCC).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Damping constant estimation in magnetoresistive readers

The damping constant is a key design parameter in magnetic reader design. Its value can be derived from bulk or sheet film ferromagnetic resonance (FMR) line width. However, dynamics of nanodevices is usually defined by presence of non-uniform modes. It triggers new damping mechanisms and produces stronger damping than expected from traditional FMR. This work proposes a device-level technique for damping evaluation, based on time-domain analysis of thermally excited stochastic oscillations. The signal is collected using a high bandwidth oscilloscope, by direct probing of a biased reader. Recorded waveforms may contain different noise signals, but free layer FMR is usually a dominating one. The autocorrelation function is a reflection of the damped oscillation curve, averaging out stochastic contributions. The damped oscillator formula is fitted to autocorrelation data, producing resonance frequency and damping constant values. Restricting lag range allows for mitigation of the impact of other phenomena (e.g., reader instability) on the damping constant. For a micromagnetically modeled reader, the technique proves to be much more accurate than the stochastic FMR line width approach. Application to actual reader waveforms yields a damping constant of ∼0.03.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin dynamics in permalloy nano-ellipses for honeycomb and square lattices

We report experimental and theoretical studies of spin dynamics in lattice structures of permalloy (Ni 80 Fe 20 ) nano-ellipses, with four different types of networks including honeycomb and square lattices. The lattices are patterned at the center line of the co-planar wave guide and consist of non-contacting or contacting ellipses. Micromagnetic simulations show excellent agreement with the broadband ferromagnetic resonance (FMR) experimental results. We find the existence of a spin-wave mode localized in the vertex region of the contacting nano-ellipse network. Our finding has important implications when designing an artificial spin ice (ASI) network for functional magnonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conversion of pure spin current to charge current in amorphous bismuth

Spin Hall angle and spin diffusion length in amorphous bismuth (Bi) are investigated by using conversion of a pure spin current to a charge current in a spin pumping technique. In Bi/Ni{sub 80}Fe{sub 20}/Si(100) sample, a clear direct current (DC) electromotive force due to the inverse spin Hall effect of the Bi layer is observed at room temperature under a ferromagnetic resonance condition of the Ni{sub 80}Fe{sub 20} layer. From the Bi thickness dependence of the DC electromotive force, the spin Hall angle and the spin diffusion length of the amorphous Bi film are estimated to be 0.02 and 8 nm, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring possible ferromagnetism of the LaAl O 3 / SrTi O 3 interface

We report on extensive investigations of magnetism at the n -type LaAl O 3 / SrTi O 3 interface performed by utilizing a spectrum of local and integrative analytical techniques: Scanning superconducting quantum interference device microscopy, polar Kerr magnetometry, ferromagnetic resonance, and magnetic torque magnetometry. The samples originated from the same wafers. For nominally fully oxidized samples, we find that the mere presence of the conducting interface does not induce magnetism to values exceeding already present magnetic signals originating from the substrates, irrespective of the measurement technique. With the controlled introduction of oxygen vacancies, however, the different analytical techniques with their inherently different sensitivities and potential interactions with possible magnetic moments in the samples yield different results concerning the existence of magnetism. These unexpected differences obtained with the various measurement techniques are a possible source of the disagreement in the literature about the existence of ferromagnetism at LaAl O 3 / SrTi O 3 interfaces.

36 MATERIALS SCIENCE↗

Frequency and field dependent dynamic properties of CoFe{sub 2−x}Al{sub x}O{sub 4} ferrite nanoparticles

Highlights: “CoFe{sub 2−x} Al{sub x}O{sub 4} ferrite nanoparticles: Static and dynamic properties” • Grain size reduction with Al{sup 3+} content. • Reduction in Ms, Hc, with increasing Al{sup 3+} content. • Increase in resonance frequency with applied field. • Decrease in resonance field with increase in Al{sup 3+} content. • Decrease in Gilbert parameter with increase in Al{sup 3+} content. - Abstract: Aluminum doped CoFe{sub 2−x}Al{sub x}O{sub 4} (0 ≤ x ≤ 0.9) nanoparticles were synthesized via auto-combustion. Formation of single phase cubic spinel structure was confirmed by X-ray diffraction (XRD) analysis. XRD analysis suggests a linear decrease in lattice cell parameters and grain size (90–55 nm) with the increase in Al{sup 3+} content. The saturation magnetization of samples decrease with increasing Al{sup 3+} content due to magnetic dilution effect. A concomitant linear reduction in coercivity was also observed mainly due to decrease in magnetic anisotropy. Frequency and field dependent dynamic properties of nanoparticles were studied by ferromagnetic resonance (FMR) technique. The resonance frequency increases linearly with magnetic field for all nanoparticles. Magnetic field dependent experimental absorption data (S{sub 21} vs. frequency) were compared with effective medium theory considering an effective demagnetization field and was observed to be in good agreement with each other. High Al{sup 3+} content reduces the Gilbert damping parameter thus making CoFe{sub 2−x}Al{sub x}O{sub 4} as an attractive material for high frequency applications.

36 MATERIALS SCIENCE↗

Interface effects of the magnetic properties in Nd/Ni{sub 80}Fe{sub 20} bilayer films

The magnetic properties of Nd/Ni{sub 80}Fe{sub 20} (Py) bilayer films with different layer thicknesses were investigated. Hysteresis loops were measured at different temperatures, an exchange bias effect is found at low temperature due to the Nd/Py interface. By fitting the temperature dependence of the saturation magnetization, the Néel point of Nd layer is obtained. Ferromagnetic resonance (FMR) experiments were carried out at room temperature as a function of Nd layer thickness. The damping parameter obtained by theoretical fitting of the FMR linewidth shows an increasing trend with increasing Nd layer thickness, which is taken as an indication of the spin pumping effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic Gilbert damping constant in epitaxial Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si Heusler alloys films

The (001)-oriented and (110)-oriented epitaxial grown Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si films were fabricated by magnetron sputtering technique in order to investigate the annealing temperature dependence of the intrinsic Gilbert damping constant (α). The stuck films, deposited on MgO and Al{sub 2}O{sub 3} a-plane substrates, respectively, were annealed at various temperatures ranging from 400 °C to 550 °C. The X-ray diffraction analysis was conducted to confirm that all the films were epitaxially grown. In addition, the ferromagnetic resonance measurements as well as the vibrating sample magnetometer were carried out to determine their magnetic properties. A small α of 0.004 was recorded for the sample with 001-oriented Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si (CFMS (001)) and 110-oriented CFMS (CFMS (110)) annealed at 450 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distinguishing spin pumping from spin rectification in a Pt/Py bilayer through angle dependent line shape analysis

A pure spin current driven by spin pumping is converted to a DC voltage and detected electrically in a Py/Pt bilayer sample. This DC voltage mixes with a DC voltage produced through spin rectification. The ferromagnetic resonance line shape strongly depends on the microwave magnetic h field distribution. We have systematically studied the line shapes by changing the external magnetic field orientation in plane of a Pt/Py bilayer. A method is demonstrated which allows us to calculate the microwave h field vector distribution, and distinguish spin pumping from spin rectification.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CoFe{sub 2}/Al{sub 2}O{sub 3}/PMNPT multiferroic heterostructures by atomic layer deposition

Multiferroic materials and applications allow electric bias control of magnetism or magnetic bias control of polarization, enabling fast, compact, energy-efficient devices in RF/microwave communication systems such as filters, shifters, and antennas; electronics devices such as inductors and capacitors; and other magnetic material related applications including sensors and memories. In this manuscript, we utilize atomic layer deposition technology to grow magnetic CoFe metallic thin films onto PMNPT, with a ∼110 Oe electric field induced ferromagnetic resonance field shift in the CoFe/Al{sub 2}O{sub 3}/PMNPT multiferroic heterostructure. Our work demonstrates an atomic layer deposition fabricated multiferroic heterostructure with significant tunability and shows that the unique thin film growth mechanism will benefit integrated multiferroic application in near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗