Search NASA⌕ Search

SEARCH · Search NASA

Results for “FINALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Coal to Carbon Fiber (C2CF) Continuous Processing for High Value Composites (Final Report)

Coal tar is a condensed and recovered by-product of the coking of metallurgical coal for steel production. The heaviest fraction of distilled coal tar is an isotropic pitch largely used as a binder in the manufacturing of carbonaceous electrodes for primary aluminum smelting and in electric arc furnaces. Coal tar pitch offers high carbon yield upon carbonization. In this project, a process to convert the domestically sourced isotropic coal tar pitch, containing very low particulates (QI = 0.32 wt.%), to form flow-domain mesophase pitch amenable for melt spinning into precursor (green) fibers for carbon fiber, was developed and optimized. The final reproducible processing developed is reviewed in this report, along with several characterizations of the mesophase pitch. A final definition of the characteristics of a ‘spinnable’ mesophase pitch is presented. With this mesophase pitch, reproducible and stable multifilament melt spinning was developed, producing green fiber tows with filament diameters of approximately 20 m. The multifilament melt spinning was the most challenging aspect of the project and required the most effort. The best practices learned from this project for melt spinning are reviewed in this report. Once spun, the green fibers were oxidatively stabilized, carbonized and graphitized under inert gas atmosphere to form the final carbon fibers. Given the relatively high softening point of the mesophase pitch, no issues of interfilament fusion were observed during batch oxidation, and subsequent batch carbonization and graphitization went smoothly in all cases. An ~ 80 wt.% conversion of the green fiber mass to final carbon fiber was achieved. After graphitization, the carbon fibers showed high tensile moduli (most were ~ 600 GPa, or 87 Msi) consistent with commercially-available high-performance pitch-based carbon fiber. However, tensile strength and strain to failure were comparatively low. Further work to reduce defects in and on the fiber surfaces would increase these properties. SEM imaging of the graphitic fiber textures is presented herein. Rudimentary composites were fabricated from the carbon fibers and characterized showing similar modulus to baseline composites fabricated with commercial carbon fiber. Finally, a basic economic analysis was done showing the potential to increase the value of the isotropic coal tar pitch by up to 13.6 to 136 times based on a carbon fiber value of $\$$5/lb to $\$$50/lb, respectively. Moreover, the site case study suggests that the coal tar from the single integrated steel mill could supply production of up to 16 kt/yr of carbon fiber. Finally, a technological gap analysis was done which shed light on remaining technical challenges. These challenges included: recovery and utilization of condensates from the mesophase pitch processing, further advancing and increasing stability of the multifilament melt spinning processing, optimization of the oxidation processing, defect reduction for increased carbon fiber strength, and the development of a weaving process towards carbon fiber fabrics. To maximize the coal value chain, the primary objectives of this project were to (a) develop and scale efficient processing technology for producing melt-spinnable mesophase pitch from isotropic coal tar pitch, (b) clarify and simplify tedious continuous fiber processing technologies (particularly multifilament melt spinning of mesophase pitch) towards the efficient production of high performance carbon fiber, and (c) demonstrate and characterize representative composite parts derived from the final carbon fiber. Immense progress was made on all 3 objectives and is detailed in this report.

01 COAL, LIGNITE, AND PEAT↗

Final Status Survey Report for Corrective Action Unit 117 - Pluto Disassembly Facility, Building 2201, Nevada National Security Site, Nevada

This document contains the process knowledge, radiological data and subsequent statistical methodology and analysis to support approval for the radiological release of Corrective Action Unit (CAU) 117 – Pluto Disassembly Facility, Building 2201 located in Area 26 of the Nevada National Security Site (NNSS). Preparations for release of the building began in 2009 and followed the methodology described in the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM). MARSSIM is the DOE approved process for release of Real Property (buildings and landmasses) to a set of established criteria or authorized limits. The pre-approved authorized limits for surface contamination values and corresponding assumptions were established by DOE O 5400.5. The release criteria coincide with the acceptance criteria of the U10C landfill permit. The U10C landfill is the proposed location to dispose of the radiologically non-impacted, or “clean,” building rubble following demolition. However, other disposition options that include the building and/or waste remaining at the NNSS may be considered providing that the same release limits apply. The Final Status Survey was designed following MARSSIM guidance by reviewing historical documentation and radiological survey data. Following this review a formal radiological characterization survey was performed in two phases. The characterization revealed multiple areas of residual radioactivity above the release criteria. These locations were remediated (decontaminated) and then the surface activity was verified to be less than the release criteria. Once remediation efforts had been successfully completed, a Final Status Survey Plan (10-015, “Final Status Survey Plan for Corrective Action Unit 117 – Pluto Disassembly Facility, Building 2201”) was developed and implemented to complete the final step in the MARSSIM process, the Final Status Survey. The Final Status Survey Plan consisted of categorizing each individual room into one of three categories: Class 1, Class 2 or Class 3 (a fourth category is a “Non-Impacted Class” which in the case of Building 2201 only pertained to exterior surfaces of the building.) The majority of the rooms were determined to fall in the less restrictive Class 3 category, however, Rooms 102, 104, 106, and 107 were identified as containing Class 1 and 2 areas. Building 2201 was divided into “survey units” and surveyed following the requirements of the Final Status Survey Plan for each particular class. As each survey unit was completed and documented, the survey results were evaluated. Each sample (static measurement) with units of counts per minute (cpm) was corrected for the appropriate background and converted to a value with units of dpm/100 cm2. With a surface contamination value in the appropriate units, it was compared to the surface contamination limits, or in this case the derived concentration guideline level (DCGLw). The appropriate statistical test (sign test) was then performed. If the survey unit was statistically determined to be below the DCGLw, then the survey unit passed and the null hypothesis (that the survey unit is above limits) was rejected. If the survey unit was equal to or below the critical value in the sign test, the null hypothesis was not rejected. This process was performed for all survey units within Building 2201. A total of thirty-three “Class 1,” four “Class 2,” and one “Class 3” survey units were developed, surveyed, and evaluated. All survey units successfully passed the statistical test. Building 2201 meets the release criteria commensurate with the Waste Acceptance Criteria (for radiological purposes) of the U10C landfill permit residing within NNSS boundaries. Based on the thorough statistical sampling and scanning of the building’s interior, Building 2201 may be considered radiologically “clean,” or free of contamination.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Does Preinterventional Flat-Panel Computer Tomography Pooled Blood Volume Mapping Predict Final Infarct Volume After Mechanical Thrombectomy in Acute Cerebral Artery Occlusion?

PurposeDecreased cerebral blood volume is known to be a predictor for final infarct volume in acute cerebral artery occlusion. To evaluate the predictability of final infarct volume in patients with acute occlusion of the middle cerebral artery (MCA) or the distal internal carotid artery (ICA) and successful endovascular recanalization, pooled blood volume (PBV) was measured using flat-panel detector computed tomography (FPD CT).Materials and MethodsTwenty patients with acute unilateral occlusion of the MCA or distal ACI without demarcated infarction, as proven by CT at admission, and successful Thrombolysis in cerebral infarction score (TICI 2b or 3) endovascular thrombectomy were included. Cerebral PBV maps were acquired from each patient immediately before endovascular thrombectomy. Twenty-four hours after recanalization, each patient underwent multislice CT to visualize final infarct volume. Extent of the areas of decreased PBV was compared with the final infarct volume proven by follow-up CT the next day.ResultsIn 15 of 20 patients, areas of distinct PBV decrease corresponded to final infarct volume. In 5 patients, areas of decreased PBV overestimated final extension of ischemia probably due to inappropriate timing of data acquisition and misery perfusion.ConclusionPBV mapping using FPD CT is a promising tool to predict areas of irrecoverable brain parenchyma in acute thromboembolic stroke. Further validation is necessary before routine use for decision making for interventional thrombectomy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Theory of Surrogate Nuclear and Atomic Reactions with Three Charged Particles in the Final State Proceeding Through a Resonance in the Intermediate Subsystem

Within a few-body formalism, we develop a general theory of surrogate nuclear and atomic reactions with excitation of a resonance in the intermediate binary subsystem leading to three charged particles in the final state. Additionally, the Coulomb interactions between the spectator and the resonance in the intermediate state and between the three particles in the final state are taken into account. Final-state three-body Coulomb multiple-scattering effects are accounted for using the formalism of the three-body Coulomb asymptotic states based on the work published by one of the authors (A.M.M.) under the guidance of L. D. Faddeev. The formalism of the three-body Coulomb asymptotic states (CAS) was used to calculate the reaction amplitudes with three charged particles in the final state. An expression is derived for the triply differential cross section. It can be used for investigation of the Coulomb effects on the resonance line shape as well as the energy dependence of the cross section. In conclusion, we find that simultaneous inclusion of the Coulomb effects in the intermediate and final state decreases the effect of the final-state Coulomb interactions on the triply differential cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Closing the wedge: Search strategies for extended Higgs sectors with heavy flavor final states

We consider search strategies for an extended Higgs sector at the high-luminosity LHC14 utilizing multitop final states. In the framework of a two Higgs doublet model, the purely top final states ($t\bar{t}$, 4t) are important channels for heavy Higgs bosons with masses in the wedge above 2m t and at low values of tanβ, while a 2b2t final state is most relevant at moderate values of tanβ. We find, in the $t\bar{t}$ H channel, with H→$t\bar{t}$, that both single and three lepton final states can provide statistically significant constraints at low values of tanβ for mA as high as ~750 GeV. When systematics on the $t\bar{t}$ background are taken into account, however, the three lepton final state is more powerful, though the precise constraint depends fairly sensitively on lepton fake rates. We also find that neither 2b2t nor $t\bar{t}$ final states provide constraints on additional heavy Higgs bosons with couplings to tops smaller than the top Yukawa due to expected systematic uncertainties in the tt background.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Interseasonal Connections between the Timing of the Stratospheric Final Warming and Arctic Sea Ice

Connections across seasons in atmospheric circulation and sea ice have long been sought to advance seasonal prediction. This study presents a link between the springtime stratosphere and Arctic sea ice in summer through autumn. The polar stratospheric vortex dominates the winter stratosphere before breaking down each spring, which is called the stratospheric final warming, as solar radiation returns to the pole. Interannual variability of this breakdown is dynamically driven, leading to different springtime tropospheric and surface circulation patterns. To examine the different impacts of delayed and early final warmings, a multimodel composite was generated from selected CMIP5 models. Additionally, regressions were performed on JRA-55 against an index of springtime polar vortex strength. In both the multimodel composites and reanalysis regressions, significant anomalies in sea ice thickness persist several months following an anomalous timing of the final warming. A later final warming or stronger springtime polar stratospheric vortex leads to negative sea ice thickness anomalies in the East Siberian Sea and positive anomalies in the Beaufort Sea in comparison with an earlier final warming or weaker polar vortex. The spring polar stratospheric vortex is related to spring polar surface circulation patterns. The winds associated with this pattern induce anomalous sea ice motion, moving ice from the East Siberian Sea toward the Beaufort Sea. Reduced sea ice in the East Siberian Sea is linked to anomalous warmth over this region in autumn. Our results suggest that the timing of the stratospheric final warming exerts an influence on the tropospheric circulation and sea ice through autumn, which has implications for seasonal climate prediction.

Kelleher, Michael↗

Search for new physics in final states with low transverse energy photon and missing transverse energy in proton-proton collisions at $\sqrt{s} = 8$ TeV

With the recent discovery of the Higgs boson at the Large Hadron Collider (LHC), the next set of goals for the Compact Muon Solenoid (CMS) experiment includes characterizing the newly discovered particle and probing for new physics beyond the Standard Model. Results from a search for new physics in the final state with a low transverse energy photon and missing transverse energy, using a data set corresponding to an integrated luminosity of 7.3/fb collected in proton-proton collisions at 8 TeV with the CMS detector is presented. Due to the large background rate for this final state, a novel strategy was used to collect this dataset from August through December of 2012. Such final state can arise from models involving dark matter production or exotic decays of the Higgs boson in low-scale supersymmetry breaking scenarios. In the absence of deviations from the Standard Model predictions, limits are set on the probability of an exotic decay of the Higgs boson. The phase space consisting of a photon with a transverse energy of at least 45 GeV and significant missing transverse energy was further examined in a model independent way by varying the selection requirements on the missing transverse energy and the transverse mass of the system. Upper limits at the 95% confidence level on production cross section of possible processes resulting in this final state were set. Additional and complementary results from a search for new physics in the final states containing a high-energy photon and missing transverse energy are also presented, using the data set corresponding to an integrated luminosity of 19.6/fb collected in proton-proton collisions at 8 TeV. In the absence of any significant deviation from the Standard Model predictions, improved limits are set on dark matter production and on the parameters of a model with large extra dimensions. Upper limits at a 95% confidence level on the production cross section of possible processes resulting in the final state with the photon transverse momentum greater than 145 GeV and missing transverse energy greater than 140 GeV were set.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

IER 489: Critical Unresolved Region Integral Experiment (CURIE) CEDT Phase-2 Final Design

The final design for the CURIE integral benchmark experiment is presented in this report. Measurements will be performed on the Comet vertical assembly machine and include various critical configurations consisting of High Enriched Uranium (HEU) metal plates and Teflon moderator plates surrounded by a thick copper reflector. The various configurations with different Teflon plate thickness planned allow for complimentary measurements with differing nuclear data sensitivity in the Unresolved Resonance Region (URR). Similar to previously performed Zeus experiments, the proposed work will serve to validate vital nuclear data quantities and uncertainties and identify deficiencies in current radiation transport codes. Additionally, it will assess the applicability of optimization approaches to nuclear critical experiment design. The final experiment design is detailed in this report and includes design, optimization, uncertainty and continuous-energy nuclear data sensitivity analysis for the final experimental configurations that will provide the basis for a future benchmark evaluation intended for submission to the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook [1]. This document discusses the method, approach, considerations and final design chosen with conclusions. It also includes cost and schedule. The basis and principles of this document come from the preliminary design report [2]. Section 2 discusses the content and potential impact; section 3 gives an overview of the nuclear data and unresolved resonance region; section 4 gives a summary of the work done during the preliminary design; section 5 discusses the machine learning method and principles used for final design; section 6 summaries the results from final design; section 7 provides conclusions and the range of configurations chosen to carry forward to experiment execution; and section 8 includes a summary of costs.

42 ENGINEERING↗

Tuning Organic Semiconductor Packing and Morphology through Non-equilibrium Solution Processing (Final Report)

Organic semiconductors (OSCs) are a promising candidate to produce low-cost, large area, and flexible electronics. There has previously been successful development of organic field effect transistors (OFETs), photovoltaics (OPV), and bioelectronics using OSCs. Solution processing of these materials allows for the fabrication of large-area devices in the kinetic crystallization regime. The charge transport capabilities have been shown to depend on the morphology and molecular packing of the OSC within thin films. Our hypothesis is that solution processing conditions may significantly impact OSC morphology and as a result the charge transport. Therefore, this work has focused on obtaining a fundamental understanding of the morphology and molecular packing of OSCs for optimal device performance. Through our work, we have gained a better understanding of how these structural conditions were influenced by the solution processing conditions. Our studies have led to a more systematic understanding of the various parameters that impact OSC morphology. Solution processing leads to non-equilibrium films, thus allowing for the formation of diverse morphologies that are inaccessible by other fabrication methods. Previously, our group has focused on tuning the morphology of small-molecular OSCs [53, 55-57]. However, little work had been devoted to polymer OSCs. There was a lack of detailed studies characterizing the solution-state of polymer OSCs in terms of their conformation, degree of entanglement, polymer aggregation, and chain relaxation dynamics. The solution state properties are also likely to be influenced by the rigidity and molecular weight of the polymer OSCs investigated. Thus, we have focused our attention on gaining a better insight of polymer OSC films and solution processing methods. Through this proposal, our approach is to investigate the correlation between solution-state properties and the morphology of the resulting polymer OSC films. We worked three specific aims: investigate the effects of 1) polymer OSC solution-state properties on final film morphology; 2) molecular additives on the solution-state and final film properties; 3) controlled pre-aggregation in the solution-state in the final film morphology. More rigid and planar polymer backbones should promote interchain charge transport and more efficient interchain hopping between polymer chains. Through tailoring the polymer backbone, polymer sidechains, and molecular weight, we expected the altered solution-state properties to affect the final film morphology. In addition, reducing the entanglements and promoting chain alignment will likely prevent charge carrier trapping through conformation disorders. We thus studied different mechanisms, such as molecular additives, to reduce entanglements in solution. Devices fabricated from these solutions were expected to have improved charge transport abilities. In addition to tailoring the solution-state characteristics of the polymer OSCs, we investigated the effect of solution processing methods on the molecular packing and morphology of polymer OSC films. Two main solution processing techniques, e.g., spin-coating and solution shearing, were employed to fabricate OFETs. Spin coating was employed to prepare OSC films, which produce isotropic films. This technique creates several parameters to tune such as spin coating speed, acceleration, and time. Additionally, our research group developed the solution shearing method, which consists of the solution initially sandwiched between two plates. By sliding the top plate, the solution front is exposed and drying begins. This technique allows for the creation of aligned large crystalline domains. Solution shearing consists of different processing parameters which can affect the final morphology, such as shearing speed, substrate temperature and temperature gradient, distance between both plates, and the tilt angle of the top plate. Due to the complexity of the polymer systems investigated, numerous techniques were employed to characterize the polymer OSC solution state and films. All the materials were characterized using the DOE supported synchrotron X-ray scattering facilities at the Stanford Synchrotron Radiation Lightsource (SSRL). Using grazing incidence X-ray scattering (GIXS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) techniques, the crystalline structure and molecular orientations of the thin films were measured. Optical absorption (UV-Vis) spectroscopy was employed to determine the aggregation state in solution and films of the polymer systems. Polarized UV-Vis also allowed for the determination of the relative degree of polymer chain alignment for solution sheared films. Additionally, various other techniques were used to investigate other properties within the film, such as atomic force microscopy (AFM) and solution rheology. Finally, the device performance is quantified through the fabrication and characterization of OFETs, which will highlight the effects of morphology on charge transport.

36 MATERIALS SCIENCE↗

X-43A Final Flight Observations

The presentation will provide an overview of the final flight of the NASA X-43A project. The project consisted of three flights, two planned for Mach 7 and one for Mach 10. The first flight, conducted on June 2, 2001, was unsuccessful and resulted in a nine-month mishap investigation. A two-year return to flight effort ensued and concluded when the second Mach 7 flight was successfully conducted on March 27, 2004. The third and final flight, which occurred on November 16, 2004, was the first Mach 10 flight demonstration of an airframe-integrated, scramjet-powered, hypersonic vehicle. As such, the final flight presented first time technical challenges in addition to final flight project closeout concerns. The goals and objectives for the third flight as well as those for the project will be presented. The configuration of the Hyper-X stack including the X-43A, Hyper-X launch vehicle, and Hyper-X research vehicle adapter wil also be presented. Mission differences, vehicle modifications and lessons learned from the first and second flights as they applied to the third flight will also be discussed. Although X-43A flight 3 was always planned to be the final flight of the X-43A project, the X-43 program had two other vehicles and corresponding flight phases in X-43C and X-43B. Those other projects never manifested under the X-43 banner and X-43A flight 3 also became the final flight of X-43 program.

Grindle, Laurie↗

Orbit Determination Adaptations for the Cassini Grand Finale

satellite encounters. Over this period, there have been several papers describing the orbit determination process and performance up through 2016 [1-5]. In April of 2017, Cassini will enter its Grand Finale mission phase when it will traverse the gap between the D-ring and the Saturn atmosphere twenty-two times before plunging deep into the atmosphere to end the mission. The lack of targeted satellite encounters during this period necessitates updates to the nominal Cassini Orbit Determination (OD) process. This paper describes these planned adaptations for the operation of the Grand Finale. During the Equinox and Solstice Mission Phase (2008-2016), navigation analysis has been divided into segments focused on two particular targeted satellite encounters, called an “arc”. Maneuvers in an arc were usually targeted to encounter B-plane position and time, so the OD state and covariance were mapped forward to the B-plane of the encounter within the arc. Trajectory dispersions during the Grand Finale need instead to be mapped to equator crossings and targeted Cartesian positions. In addition, trajectory arcs have typically covered a few orbital revolutions (~2-8 weeks), in order to span the time between two encounters. However, the Grand Finale will encompass five months of time without an encounter which necessitates an adjusted arc strategy. A modified arc strategy was developed based on OD behavior during long multi-rev periods between encounters in the year leading up to the Grand Finale. The OD covariance study conducted for the Grand Finale mission phase will also be examined.

Criddle, Kevin↗

Microwave sintering of MoSi{sub 2}-Mo{sub 5}Si{sub 3} to promote a final nanometer-scale microstructure and suppressing of pesting phenomenon

This work shows an innovative sintering process for molybdenum disilicide (MoSi{sub 2}) and molybdenum silicide (Mo{sub 5}Si{sub 3}) in order to have a final nanometer-scale microstructure. Sintered MoSi{sub 2}-Mo{sub 5}Si{sub 3} was fabricated by microwave sintering. The final material showed a significant reduction of pesting phenomena for MoSi{sub 2}. The final microstructure is a mix of micrometer-scale MoSi{sub 2} and nanometer-scale Mo{sub 5}Si{sub 3} immersed in an amorphous SiO{sub 2} phase. This material was characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Thermal Gravimetric Analysis (TGA). - Highlights: Black-Right-Pointing-Pointer We sintered the MoSi{sub 2}-Mo{sub 5}Si{sub 3} by microwave and obtained high final density material. Black-Right-Pointing-Pointer We got a final nanostructured material. Black-Right-Pointing-Pointer We inhibited pesting phenomenon for MoSi{sub 2}.

36 MATERIALS SCIENCE↗

Final state radiation from high and ultrahigh energy neutrino interactions

Charged leptons produced by high-energy and ultrahigh-energy neutrinos have a substantial probability of emitting prompt internal bremsstrahlung ν ℓ + N → ℓ + X + γ . This can have important consequences for neutrino detection. We discuss observable consequences at high- and ultrahigh-energy neutrino telescopes and the Large Hadron Collider’s (LHC’s) Forward Physics Facility. Logarithmic enhancements can be substantial (e.g., ∼ 20 % ) when either the charged lepton’s energy or the rest of the cascade is measured. We comment on final state radiation’s impacts on measuring the inelasticity distribution, ν / ν ¯ flux ratio, throughgoing muons, and double-bang signatures for high-energy neutrino observation. Furthermore, for ultrahigh-energy neutrino observation, we find that final state radiation increases the overall detectable energy by as much as 20%, affects flavor measurements, and decreases the energy of both Earth-emergent tau leptons and regenerated tau neutrinos. Many of these have significant impacts on measuring neutrino fluxes and spectra. Finally, for the LHC’s Forward Physics Facility, we find that final state radiation will impact future extractions of strange quark parton distribution functions. Final state radiation should be included in future analyses at neutrino telescopes and the Forward Physics Facility. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for WH Associated Production in the l upsilon b-bbar Final State Using the DØ Detector at the Tevatron

The Standard Model is the framework which allows to describe interactions between particles and their dynamics. The Higgs mechanism is a solution to naturally introduce a mass term in the theoretical description of this model. After electroweak spontaneous symmetry breaking, a new massive scalar particle is introduced, the Higgs boson. Since it hasn’t been discovered yet, the search for the Higgs boson is carried at the Tevatron, which is a p$\bar{p}$ collider at a center-of-mass of 1.96 TeV. For M H <115 GeV, the dominant decay mode is H → b$\bar{b}$ . The analysis presented in this document is focused on the 100< M H <150 GeV mass range, in the channel where the Higgs boson is produced in assocation with a W boson which decays either to an electron or muon and a neutrino. The study of this final state relies on informations collected from all parts of the DØ detector. A result based on 5.3 fb -1 of RunII Tevatron collisions is presented here. In order to increase the sensitivity to the signal, the analysis is separated in different sub-channels according to the lepton flavour, number of jets in the final state, number of jets identified as originated from b quarks and data taking periods. After selecting events, a multivariate analysis technique is used to separate signal-like events from the expected physics and instrumental backgrounds. A good agreement between data and simulation is observed. As no signal excess is observed in data, an observed (expected) upper limit of 4.5 (4.8) for M H = 115 GeV is set on the ratio of the WH cross section multiplied by the H → b$\bar{b}$ branching fraction to its standard model prediction, at 95% confidence level. Since the final Tevatron dataset is soon to be analyzed, an effort is brought to achieve the maximum sensitivity. A preliminary analysis updated in Summer 2011 is presented as well as future improvements to be considered in the final publication for the search in the WH → ℓνb$\bar{b}$ channel. Since the dijet invariant mass is the most discriminant single variable, a correction based on jet shapes is derived to improve the mass resolution, hence the analysis sensitivity. Moreover, a different usage of b-jets identification tools and optimization studies on the final discriminant yields a significant improvement. This result is part of the Tevatron Higgs combination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of Final State Interaction Strength in Plastic Scintillator by Muon-Neutrino Charged Current Charged Pion Production

Precise knowledge of neutrino-nucleus interactions is increasingly important as neutrino oscillation measurements transition into the systematics-limited era. In addition to modifying the initial interaction, the nuclear medium can scatter and absorb the interaction by-products through final state interactions, changing the types and kinematic distributions of particles seen by the detector. Recent neutrino pion production data from MiniBooNE is inconsistent with the final state interaction strength predicted by models and theoretical calculations, and some models fit best to the MiniBooNE data only after removing final state interactions entirely. This thesis presents a measurement of dσ/dT π and dσ/dθ π for muon-neutrino charged current charged pion production in the MINER A scintillator tracker. MINER A is a neutrino-nucleus scattering experiment installed in the few-GeV NuMI beam line at Fermilab. The analysis is limited to neutrino energies between 1.5-10 GeV. Dependence on invariant hadronic mass W is studied through two versions of the analysis that impose the limits W < 1.4 GeV and W < 1.8 GeV. The lower limit on W increases compatibility with the MiniBooNE pion data. The shapes of the differential cross sections, which depend strongly on the nature of final state interactions, are compared to Monte Carlo and theoretical predictions. It is shown that the measurements presented in this thesis favor models that contain final state interactions. Additionally, a variety of neutrino-nucleus interaction models are shown to successfully reproduce the thesis measurements, while simultaneously failing to describe the shape of the MiniBooNE data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Final Focus Solenoid Design Considerations

Radiography utilizing intense relativistic electron beams requires a final focus magnet to produce a small beam spot on the x-ray conversion target. A solenoid magnet is generally used for the final focus magnet. This note addresses design considerations of the final focus solenoid that impact the spot size. The spot size on target is a function of the beam size entering the final focus magnet, the beam emittance and energy spread and spherical aberration inherent in a solenoid magnet. The present final focus solenoid designs for both Axis 1 and Axis 2 of the DARHT facility are evaluated. A new design is proposed for both Axis 1 and Axis 2.

43 PARTICLE ACCELERATORS↗

The Initial–Final Mass Relation for Hydrogen-deficient White Dwarfs

The initial–final mass relation represents the total mass lost by a star during the entirety of its evolution from the zero age main sequence to the white-dwarf cooling track. The semiempirical initial–final mass relation (IFMR) is largely based on observations of DA white dwarfs, the most common spectral type of white dwarf and the simplest atmosphere to model. We present a first derivation of the semiempirical IFMR for hydrogen-deficient (non-DA) white dwarfs in open star clusters. We identify a possible discrepancy between the DA and non-DA IFMRs, with non-DA white dwarfs ≈0.07 M {sub ⊙} less massive at a given initial mass. Such a discrepancy is unexpected based on theoretical models of non-DA formation and observations of field white dwarf mass distributions. If real, the discrepancy is likely due to enhanced mass loss during the final thermal pulse and renewed post-AGB evolution of the star. However, we are dubious that the mass discrepancy is physical and instead is due to the small sample size, to systematic issues in model atmospheres of non-DAs, and to the uncertain evolutionary history of Procyon B (spectral type DQZ). A significantly larger sample size is needed to test these assertions. In addition, we also present Monte Carlo models of the correlated errors for DA and non-DA white dwarfs in the initial–final mass plane. We find the uncertainties in initial–final mass determinations for individual white dwarfs can be significantly asymmetric, but the recovered functional form of the IFMR is grossly unaffected by the correlated errors.

79 ASTRONOMY AND ASTROPHYSICS↗

Feldspathic granulitic impactites and pre-final bombardment lunar evolution

It is suggested that feldspathic granulitic impactites, which are characterized by a high model plagioclase content of between 70 and 80%, all formed in the period after consolidation of the lunar crust and before the final bombardment. The granulitic impactites contain essentially no KREEP component, which suggests that KREEP appeared on the lunar surface mostly after the formation of the granulitic impactites, at about the start of the final bombardment. The granulite metamorphism indicated by the matrix textures of these samples requires 1000 C temperatures for prolonged periods of time. The apparent sequence of formation is granulitic impactites before the final bombardment, crystalline-matrix breccias during the final bombardment, and vitric-matrix breccias after the final bombardment. The sequence is consistent with a described thermal model of breccia lithification and with characteristics of the decay of the meteorite flux rate.

Warner, J. L.↗