Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The role of collisional energy transfer in the thermal and prompt dissociation of 1-methyl allyl

Collisional energy transfer plays a pivotal role in a-priori calculations of the pressure-dependent rate constants obtained from a master equation. However, accurate determinations of collisional energy transfer parameters are rare and so most kinetic studies rely on best-fits of these parameters to experimental measurements (if available) or estimates guided from literature studies. In this work, we have quantified the effect of the uncertainty in energy transfer parameters on the thermal and prompt dissociation kinetics of a resonance stabilized radical, 1-methyl allyl (1MA), of relevance to the combustion of 1- and 2-butene isomers. Simulations using literature kinetics models were performed to assess the impact of these uncertainties on flame propagation and speciation data in laminar flames of 1- and 2-butene. Analyses of the uncertainty propagated by the energy transfer parameters for 1MA dissociation to the flame simulations, in particular the laminar flame speed, indicate an intricate coupling between the kinetics of 1MA dissociation (chain propagation) and its reaction with H-atoms (chain-termination). Ab-initio based theoretical calculations were also performed to obtain pressure-dependent kinetics for the reaction of 1MA with H-atoms. Lastly, theoretically calculated energy transfer parameters were used to best characterize the kinetics and branching between the chain propagating 1MA dissociation and the chain-terminating reaction 1MA + H.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies of premixed and non-premixed hydrogen flames

The hydrogen oxidation chemistry constitutes the foundation of the kinetics of all carbon- and hydrogen-containing fuels. The validation of rate constants of hydrogen-related reactions can be complicated by uncertainties associated with experimental data caused by the high reactivity and diffusivity of hydrogen.Here, accurate experimental data on flame propagation and extinction were determined for premixed and non-premixed hydrogen flames at pressures between p = 1 and 7 atm. The experiments were designed to sensitize the three-body H + O 2 + M → HO 2 + M reaction, whose rate is subject to notable uncertainty. This was achieved by increasing the pressure and by adding to the reactants H 2 O and CO 2 whose collision efficiencies are high compared to other species. In the present study, directly measured flame properties were compared against computed ones, in order to eliminate uncertainties associated with extrapolations, as is the case for laminar flame speeds. The measured extinction strain rates exhibit both a positive and negative dependence on pressure with and without weighting with the density, and this non-monotonic behavior is caused by the competition between the H + O 2 → O + OH and H + O 2 + M → HO 2 + M reactions as well as HO 2 kinetic pathways as pressure increases. The various kinetic models considered in this investigation did not reproduce equally well the non-premixed flame extinction data with added H 2 O. Yet, the predicted extinction strain rates were consistent between the various models in the case of added CO 2 . Finally, it was shown that the formulation of binary diffusion coefficient pairs including H–N 2 and H 2 –N 2 has a first order effect on the prediction of extinction strain rates of non-premixed H 2 flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion Phenomena in Relationship to Microgravity Research

The conservation equations of combustion are presented, with relevant nondimensional parameters identified, for focusing on the role of buoyancy in combustion processes. The objective is to indicate ways in which microgravity combustion experiments enable regimes of fluid mechanics, not readily investigated in combustion at normal gravity, to be studied more carefully for chemically reacting flows with heat release. Descriptions are given of self-extinguishing flames, of flames balls, of double flames, and of the slow regime of droplet combustion, as examples in which microgravity experiments have revealed new combustion phenomena. A classification of experiments is offered, concerning combustion regimes and flow regimes, within which microgravity combustion studies can be placed. Projects on premixed flame propagation, gas-jet diffusion flames, flame spread, smoldering combustion, and droplet combustion are considered, within this classification, as potential areas for future advances in understanding of combustion phenomena through microgravity experiments.

Williams, Forman A.↗

Direct simulation of turbulent combustion

Understanding and modeling of turbulent combustion are key-problems in the computation of numerous practical systems. Because of the lack of analytical theories in this field and of the difficulty of performing precise experiments, direct simulation appears to be one of the most attractive tools to use in addressing this problem. The present work can be split into two parts: (1) Development and validation of a direct simulation method for turbulent combustion; (2) Applications of the method to premixed turbulent combustion problems. The goal of part 1 is to define and to test a numerical method for direct simulation of reacting flows. A high level of confidence should be attached to direct simulation results, and this can only be achieved through extensive validation tests. In part 2, direct simulation is used to address some of the many critical problems related to turbulent combustion. At the present time, I have limited this work to premixed combustion and considered only four basic issues: (1) The effect of pressure waves on flame propagation; (2) The interaction between flame fronts and vortices; (3) The influence of curvature on premixed flame fronts; and (4) The validation of flamelet models for premixed turbulent combustion.

Poinsot, T. J.↗

Microgravity combustion of dust clouds: Quenching distance measurements

The current level of physical understanding of dust combustion phenomena is still in a rudimentary state compared with the understanding of gas combustion processes. The reason for such a lack of fundamental understanding is partially based on the complexity of multiphase combustion and the enormous diversity of chemical-physical properties of heterogeneous combustible mixtures but is largely due to difficulties in the experimental investigation of dust combustion. The influence of gravity on a dust suspension is the main reason. First of all, when particulates (either solid particles or liquid droplets) with a characteristic size of the order of tens of microns are suspended, they rapidly settle in the gravitational field. To maintain a particulate suspension for a time duration adequate to carry out combustion experiments invariably requires continuous convection of particulates at or in excess of the gravitational settling velocity. Of necessity, this makes the experiments turbulent in character and makes it impossible to study laminar dust flames. For particle sizes of the order of microns a stable laminar dust flow can be maintained only for relatively small dust concentrations (e.g., for low fuel equivalence ratios) at normal gravity conditions. High dust loading leads to gravitational instability of the dust cloud and to the formation of recirculation cells in a dust suspension in a confined volume, or to the rapid sedimentation of the dense dust cloud as a whole in an unconfined volume. In addition, many important solid fuels such as low volatile coal, carbon, and boron have low laminar flame speeds (of the order of several centimeters per second). Gravitational convection that occurs in combustion products due to the buoyancy forces disrupts low speed dust flames and, therefore, makes observation of such flames at normal gravity impossible. The only way to carry out 'clean' fundamental experiments in dust combustion over a wide range of dust cloud parameters is in a gravity-free environment. Access to the microgravity environment provided by the use of large-scale drop towers, parabolic flights of aircraft and rockets, and shuttle and space station orbits has permitted now to proceed with a systematic program of dust combustion microgravity research. For example, the NASA-Lewis drop tower and a Lear jet parabolic flight aircraft were used by Ross et al. and by Berlad and Tangirala for experiments with Iycopodium/air mixtures. The Japan Microgravity Center drop shaft (JAMIC) where a microgravity condition of 10(exp -4) g for 10 s is available, was recently used by Kobayashi, Niioka et al. for measuring flame propagation velocities in polymethyl methacrylate dust/air suspensions. Microgravity dust combustion experiments were started at McGill University in the early 90's under the sponsorship of the Canadian Space Agency. Several generations of dust combustion platforms permitting dust combustion microgravity experiments to be carried out on board a parabolic flight aircraft (KC-135, NASA) have been designed and tested. The experimental data and experience gained from this research allowed us to design and build in a current phase of this program the microgravity apparatus for the visual observation of freely propagating constant pressure laminar dust flames. Quenching distances in aluminum dust suspensions have been measured in a wide range of dust cloud parameters in ground-based experiments and in recent microgravity experiments (KC-135 parabolic flights, Houston, February 1995).

Goroshin, S.↗

The Water-Mist Fire Suppression Experiment (Mist): Preliminary Results From The STS-107 Mission

An investigation of the effect of water mists on premixed flame propagation has been conducted onboard the Space Shuttle to take advantage of the prolonged microgravity environment to study the effect of uniformly distributed clouds of polydisperse water mists on the speed and shape of propagating propane-air premixed flames. The suspension of a quiescent and uniform water mist cloud was confirmed during the microgravity tests. Preliminary results show good agreement with trends obtained by the numerical predictions of a computational model that uses a hybrid Eulerian-Lagrangian formulation to simulate the two-phase, flame/mist interaction. Effective flame suppression is observed at progressively higher water loadings and smaller water droplet sizes. Other unusual flame behavior, such as flame front breakup and pulsating flames, is still under investigation. The promising results from the microgravity tests will be used to assess the feasibility of using water mists as fire suppressants on Earth and on spacecraft.

Abbud-Madrid, Angel↗

Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

Film energetics are becoming increasingly popular because a variety of technologies are driving a need for localized energy generation in a stable, safe and flexible form. Aluminum (Al) and molybdenum trioxide (MoO{sub 3}) composites were mixed into a silicon binder and extruded using a blade casting technique to form flexible free-standing films ideal for localized energy generation. Since this material can be extruded onto a surface it is well suited to additive manufacturing applications. This study examines the influence of 0-35% by mass potassium perchlorate (KClO{sub 4}) additive on the combustion behavior of these energetic films. Without KClO{sub 4} the film exhibits thermal instabilities that produce unsteady energy propagation upon reaction. All films were cast at a thickness of 1 mm with constant volume percent solids to ensure consistent rheological properties. The films were ignited and flame propagation was measured. The results show that as the mass percent KClO{sub 4} increased, the flame speed increased and peaked at 0.43 cm/s and 30 wt% KClO{sub 4}. Thermochemical equilibrium simulations show that the heat of combustion increases with increasing KClO{sub 4} concentration up to a maximum at 20 wt% when the heat of combustion plateaus, indicating that the increased chemical energy liberated by the additional KClO{sub 4} promotes stable energy propagation. Differential scanning calorimeter and thermogravimetric analysis show that the silicone binder participates as a fuel and reacts with KClO{sub 4} adding energy to the reaction and promoting propagation.

36 MATERIALS SCIENCE↗

Passive turbulent flamelet propagation

We analyze results of a premixed constant density flame propagating in three-dimensional turbulence, where a flame model developed by Kerstein, et al. (1988) has been used. Simulations with constant and evolving velocity fields are used, where peculiar results were obtained from the constant velocity field runs. Data from the evolving flow runs with various flame speeds are used to determine two-point correlations of the fluctuating scalar field and implications for flamelet modeling are discussed.

Ashurst, William T.↗

Influence of flow field scaling on flashback of swirl flames

In this paper, the effect of geometrical scaling on the onset of flashback into a cylindrical premixing zone of a swirl flame is investigated. We discriminate two types of flashback. In the first type of flashback the flame propagates upstream inside an already present axial recirculation zone. This flashback is caused by turbulent burning along the vortex axis (TBVA) and is controlled by flame extinction inside the recirculation zone. The second type of flashback is caused by combustion induced vortex breakdown (CIVB). This type of flashback is characterised by the aerodynamic influence of the combustion heat release that leads to propagation of the axial recirculation zone and the flame in upstream direction. To study the effects of geometrical scaling on the flow fields and the two types of flashback, the operation of two geometrically scaled burners are compared at equal Reynolds number. By this method it is possible to observe the flashback phenomena in similar swirl flow fields but with different turbulent scales affecting the combustion process. To check flow field similarity and to indentify the flashback type, the non-reacting and reacting flow fields have been examined by planar particle imaging velocimetry and simultaneous recording of the flame luminescence. It is shown that geometrical scaling of the burner shifts the equivalence ratio at which flashback occurs and that this shift is different for the two types of flashback. Consistency and inconsistency with known scaling and stability criterions is discussed. Analysing the fluid dynamics and turbulent combustion gives a first explanation of why CIVB and TBVA are affected differently by geometrical scaling at constant Reynolds number which is in good agreement with the experimental observations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propagation of a premixed flame in a divided-chamber combustor

The propagation of premixed ethylene-air mixtures (of 0.5, 0.525, 0.55, and 0.65 equivalence ratios) in a divided-chamber combustor was investigated. The vessel, divided by a small cylindrical prechamber, had optical access (for laser-schlieren videography) and was instrumented by a pressure transducer. For the Reynolds numbers of 1870, 2300, and 2830, the observed spatial development of the laminar flames showed that the flame position and shape could be scaled by a characteristic time, based on the burned gas flame speed and the length of the prechamber. Above a Reynolds number of 4330, this scaling breaks down the appearance of Kelvin-Helmholtz instabilities. The observed flame propagation was compared with predictions obtained with a numerical model of flame propagation. The calculated spatial and temporal development of the flame in the main combustion chamber agreed with the experimental observations only for the lowest Reynolds number (1870).

Cattolica, R. J.↗

Unsteady deflagration speed of an auto-ignitive dimethyl-ether (DME)/air mixture at stratified conditions

The propagation speed of an auto-ignitive dimethyl-ether (DME)/air mixture at elevated pressures and subjected to monochromatic temperature oscillations is numerically evaluated in a one-dimensional statistically stationary configuration using fully resolved numerical simulations with reduced kinetics and transport. Two sets of conditions with temperatures within and slightly above the negative temperature coefficient (NTC) regime are simulated to investigate the fundamental aspects of auto-ignition and flame propagation along with the transition from auto-ignitive deflagration to spontaneous propagation regimes under thermal stratification. Contrary to the standard laminar flame speed, the steady propagation speed of an auto-ignitive front is observed to scale proportionally to its level of upstream reactivity. It is shown that this interdependence is primarily influenced by the characteristic residence time and the homogeneous auto-ignition delay. Furthermore, the unsteady reaction front in either of the two cases responds distinctly to the imposed stratification. Specifically, the results in both cases show that the dynamic flame response depends on the mean temperature at the flame base Tb and the time-scale of thermal stratification. It is also found that, based on Tb and the propensity of the mixture to two-stage chemistry, the instantaneous peak propagation speed and the overall time taken to achieve that speed differs considerably. A displacement speed analysis is carried out to elucidate the underlying combustion modes that are responsible for such a variation in flame response.

Energy & Fuels↗

A dynamic subgrid-scale model for LES of the G-equation

Turbulent combustion is a difficult subject as it must deal with all of the issues found in both turbulence and combustion. (We consider only premixed flames in this paper, but some of the ideas can be applied to the non-premixed case.) As in many other fields, there are two limiting cases that are easier to deal with than the general case. These are the situations in which the chemical time scale is either much shorter or much longer than the time scale associated with the turbulence. We deal with the former case. In this limit, the flame is thin compared to the turbulence length scales and can be idealized as an infinitely thin sheet. This is commonly called the flamelet regime; it has been the subject of many papers and the basis for many models (see, e.g., Linan & Williams 1993). In the flamelet model, the local flame structure is assumed to be identical to the laminar flame structure; thus the flame propagates normal to itself at the laminar flame speed, S(sub L). This allows the use of simple approximations. For example, one expects the rate of consumption of fuel to be proportional to the area of the flame surface. This idea allowed Damkohler (1940) to propose that the wrinkled flame could be replaced by a smooth one which travels at the turbulent flame speed, S(sub T), defined by S(sub T)/S(sub L) = A(sub L) /A(sub P) where A(sub L) is the total flame surface area and AP is the area projected onto the mean direction of propagation. This relation can be expected to be valid when the flame structure is modified only slightly by the turbulence. More recent approaches have attempted to relate the turbulent flame speed to turbulence intensity, u(sub '), which presumably, characterizes the wrinkling of the flame.

Bourlioux, A.↗

Warning signals for eruptive events in spreading fires

Significance As flames spread through forests, buildings, or other complex environments, they can erupt, unexpectedly, into fast-moving conflagrations. This study presents evidence that characteristic patterns in the behavior of spreading flames may indicate when such eruptions are likely to occur. Our results rely on the detection of a phenomenon termed “critical slowing down”—the slowed recovery of multistable systems from perturbations as those systems approach tipping points. Using a bistable combustion system in which flames propagate either as small, slowly moving flames, or as large, rapidly moving flames stabilized by feedback between wind and fire, we provide evidence that slowing responses of spreading flames to sudden changes in environment (e.g., wind, terrain) may anticipate the onset of intense, feedback-stabilized modes of propagation.

54 ENVIRONMENTAL SCIENCES↗

Experimental study of limit lean methane/air flame in a standard flammability tube using particle image velocimetry method

Lean limit methane/air flame propagating upward in a standard 50 mm diameter and 1.8 m length tube was studied experimentally using particle image velocimetry method. Local stretch rate along the flame front was determined by measured gas velocity distributions. It was found that local stretch rate is maximum at the flame leading point, which is in agreement with earlier theoretical results. Similar to earlier observations, extinction of upward propagating limit flame was observed to start from the flame top. It is stated that the observed behavior of the extinction of the lean limit methane/air flame can not be explained in terms of the coupled effect of flame stretch and preferential diffusion. To qualitatively explain the observed extinction behavior, it is suggested that the positive strain-induced flame stretch increases local radiation heat losses from the flame front. An experimental methodology for PIV measurements in a round tube is described. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗