Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLEXIBLE BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Attitude Control Approach for Solar Cruiser, a Large, Deep Space Solar Sail

Solar Cruiser is a small satellite Technology Demonstration Mission (TDM) to mature solar sail propulsion technology using a solar sail larger than 1600 square meters, demonstrating performance as a propulsion system and a stable pointing platform for science observations in an artificial halo orbit sunward of the Sun-Earth Lagrange Point 1 (sub-L1). For the “sailcraft” to meet mission ob- jectives, there are several unique attitude control challenges that the Attitude De- termination and Control System (ADCS) must overcome. Large disturbance tor- ques, primarily due to sail deformations coupled with off-sun pointing angles, make it more difficult to maintain adequate controls performance and manage accumulated momentum on the control actuators. The large-amplitude, low- frequency flexible body modes of the sail, in concert with noisy sensors and ac- tuators, make it challenging to mitigate control-structure interactions and main- tain fine pointing capabilities. Stability and control performance during sail de- ployment is complicated by rapidly and widely varying inertias. The Solar Cruiser ADCS effectively addresses these challenges using a simple, traditional control system – including momentum management actuators that use bang- bang control to constrain internal accumulated momentum, a low-pass controls filter and an attitude determination Kalman Filter (KF) that blends multiple star tracker solutions, and a reaction wheel assembly (RWA) with controller gains tuned to specific configurations or inertias. Solar Cruiser’s attitude control ap- proach, and lessons learned from its development, establishes a state of the art of high value to future solar sail missions and other small spacecraft with large de- ployable structures operating in deep space.

solar sail↗
NASA NTRSDate not supplied

Attitude Control Approach for Solar Cruiser, a Large, Deep Space Solar Sail

Solar Cruiser is a small satellite Technology Demonstration Mission (TDM) to mature solar sail propulsion technology using a solar sail larger than 1600 square meters, demonstrating performance as a propulsion system and a stable pointing platform for science observations in an artificial halo orbit sunward of the Sun-Earth Lagrange Point 1 (sub-L1). For the “sailcraft” to meet mission objectives, there are several unique attitude control challenges that the Attitude Determination and Control System (ADCS) must overcome. Large disturbance torques, primarily due to sail deformations coupled with off-sun pointing angles, make it more difficult to maintain adequate controls performance and manage accumulated momentum on the control actuators. The large-amplitude, low-frequency flexible body modes of the sail, in concert with noisy sensors and actuators, make it challenging to mitigate control-structure interactions and maintain fine pointing capabilities. Stability and control performance during sail deployment is complicated by rapidly and widely varying inertias. The Solar Cruiser ADCS effectively addresses these challenges using a simple, traditional control system – including momentum management actuators that use bang-bang control to constrain internal accumulated momentum, a low-pass controls filter and an attitude determination Kalman Filter (KF) that blends multiple star tracker solutions, and a reaction wheel assembly (RWA) with controller gains tuned to specific configurations or inertias. Solar Cruiser’s attitude control approach, and lessons learned from its development, establishes a state of the art of high value to future solar sail missions and other small spacecraft with large deployable structures operating in deep space.

solar sail↗
NASA NTRS1983

Comparing attitude control effectiveness for actuators on two bodies of a six body model of a flexible spacecraft with that for actuators restricted to a single body

A ten rigid body model of a prototype flexible space platform was approximated by a six body model to facilitate comparison of attitude control effectiveness for actuators on two bodies with control effectiveness for actuators restricted to a single body of the same model. Actuators and sensors were found to be required on two of the six bodies for effective attitude control.

Chichester, F. D.↗
NASA NTRS1989

A NASTRAN/TREETOPS solution to a flexible, multi-body dynamics and controls problem on a UNIX workstation

Demands for nonlinear time history simulations of large, flexible multibody dynamic systems has created a need for efficient interfaces between finite-element modeling programs and time-history simulations. One such interface, TREEFLX, an interface between NASTRAN and TREETOPS, a nonlinear dynamics and controls time history simulation for multibody structures, is presented and demonstrated via example using the proposed Space Station Mobile Remote Manipulator System (MRMS). The ability to run all three programs (NASTRAN, TREEFLX and TREETOPS), in addition to other programs used for controller design and model reduction (such as DMATLAB and TREESEL, both described), under a UNIX Workstation environment demonstrates the flexibility engineers now have in designing, developing and testing control systems for dynamically complex systems.

Benavente, Javier E.↗
NASA NTRS1985

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are useed to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗
NASA NTRS1986

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator-theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are used to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗
NASA NTRS1985

A Galerkin method for the estimation of parameters in hybrid systems governing the vibration of flexible beams with tip bodies

An approximation scheme is developed for the identification of hybrid systems describing the transverse vibrations of flexible beams with attached tip bodies. In particular, problems involving the estimation of functional parameters are considered. The identification problem is formulated as a least squares fit to data subject to the coupled system of partial and ordinary differential equations describing the transverse displacement of the beam and the motion of the tip bodies respectively. A cubic spline-based Galerkin method applied to the state equations in weak form and the discretization of the admissible parameter space yield a sequence of approximating finite dimensional identification problems. It is shown that each of the approximating problems admits a solution and that from the resulting sequence of optimal solutions a convergent subsequence can be extracted, the limit of which is a solution to the original identification problem. The approximating identification problems can be solved using standard techniques and readily available software.

Banks, H. T.↗
NASA NTRS1991

A passivity based control methodology for flexible joint robots with application to a simplified shuttle RMS arm

The main goal is to develop a general theory for the control of flexible robots, including flexible joint robots, flexible link robots, rigid bodies with flexible appendages, etc. As part of the validation, the theory is applied to the control law development for a test example which consists of a three-link arm modeled after the shoulder yaw joint of the space shuttle remote manipulator system (RMS). The performance of the closed loop control system is then compared with the performance of the existing RMS controller to demonstrate the effectiveness of the proposed approach. The theoretical foundation of this new approach to the control of flexible robots is presented and its efficacy is demonstrated through simulation results on the three-link test arm.

Sicard, Pierre↗
NASA NTRS1984

A numerical scheme for the identification of hybrid systems describing the vibration of flexible beams with tip bodies

A cubic spline based Galerkin-like method is developed for the identification of a class of hybrid systems which describe the transverse vibration to flexible beams with attached tip bodies. The identification problem is formulated as a least squares fit to data subject to the system dynamics given by a coupled system of ordnary and partial differential equations recast as an abstract evolution equation (AEE) in an appropriate infinite dimensional Hilbert space. Projecting the AEE into spline-based subspaces leads naturally to a sequence of approximating finite dimensional identification problems. The solutions to these problems are shown to exist, are relatively easily computed, and are shown to, in some sense, converge to solutions to the original identification problem. Numerical results for a variety of examples are discussed.

Rosen, I. G.↗
NASA NTRS1994

Mathematical modeling of a class of multibody flexible spacecraft structures

A mathematical model for a general multibody flexible spacecraft is obtained. The generic spacecraft considered consists of a flexible central body to which a number of flexible multibody structures are attached. The coordinate systems used in the derivation allow effective decoupling of the translational motion of the entire spacecraft from its rotational motion about its center of mass. The derivation assumes that the deformations in the bodies are only due to elastic motions. The dynamic model derived is a closed-form vector-matrix differential equation. The model developed can be used for analysis and simulation of many realistic spacecraft configurations.

Kelkar, Atul, G.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-21010-DND

The primary objective of this work is the dynamic analyses of the Tendon-Actuated Lightweight In-Space Manipulator (TALISMAN) which entails structural dynamics, multi-body dynamics and flexible multi-body dynamics modeling and simulation of robotic systems, associated space vehicles and operations. The dynamic analysis is in the critical path of TALISMAN technology development for utilization in the Asteroid Redirect Mission (ARM) and for potential application to Satellite Servicing Missions (SSM). In addition, modeling work supports control design, and the testing of space operations.

Cornelia Altenbuchner↗
NASA NTRS1992

Laboratory evaluation of two advanced suspension devices for ground vibration testing of large space structures

In order to provide the advanced suspension technology needed to allow ground test measurement of free-body modal parameters, two advanced suspension devices, one passive, the other active, are evaluated on the basis of laboratory testing of each device type with rigid and flexible payloads. Rigid-body tests show the basic behavior of the devices when they are uncoupled from a test article near their bandwidth. Flexible body tests show how suspension device dynamics couple with the dynamics of a representative large space structure. For the flexible body testing, targets for the free-body modal parameters are developed from test-verified analysis of the representative structure suspended in an orientation which is only mildly sensitive to suspension constraints.

Cooley, Victor M.↗
NASA NTRS1992

Fuel optimal propulsive reboost of flexible spacecraft

This paper presents for the first time an exact solution to the fuel optimal propulsive reboost problem for flexible spacecraft. The spacecraft undergoes rigid-body motion and flexible-body motion and reboost is achieved propulsively through the use of reaction control jets. The exact fuel optimal solution to the associated minimization problem is found numerically based on an adaptive grid bisection search. The reboost of the floating harmonic oscillator reveals properties of the fuel optimal solution. Nondimensional plots of minimum fuel versus maneuver time expose the nature of the solution classes depending on the maneuver time. Some very interesting properties are observed, among them, the shifting of impulses to the smaller oscillator mass, and comparisons are made with near fuel optimal solutions obtained by other investigators.

Silverberg, Larry↗
NASA NTRS1985

Numerical and experimental evaluation for single-axis control of an LSS laboratory model

One of the major problems of LSS attitude control design stems from the modeling uncertainties due to modal truncation errors and modal parameter estimation errors. This modeling problem is investigated by evaluating poles and zeros of the frequency response functions, described in terms of constrained or unconstrained modes. The frequency domain approach is utilized to evaluated the results of modal analyses and direct output feedback controller experiments using a simple flexible spacecraft model consisting of a rigid primary body and flexible aluminum beam(s) with a control moment gyro as an actuator. The modal data are compared under the conditions that the model is constrained as the canti-lever and it is rotationally free on a single-axis air bearing table. In addition, the open-loop responses are experimentally examined under the impulsive disturbance to the appendage. The results of the control experiments show that the first vibration mode of the appendage and the interacted rotational motion of the primary body are damped in a short time as predicted by the numerical analysis, to produce damping ratio of 10-20%.

Ohkami, Y.↗
NASA NTRS1991

Vortical flow computations on a flexible blended wing-body configuration

Flows over blended wing-body configurations are often dominated by vortices. The unsteady aerodynamic forces due to such flows can couple with the elastic forces of the wing and lead to aeroelastic oscillations. Such aeroelastic oscillations can impair the performance of an aircraft; it is necessary to account for structural properties of the configuration and solve the aerodynamic and aeroelastic equations of motion simultaneously. The flow is modeled using the Navier-Stokes equations coupled with the aeroelastic equations of motion. Computations are made for a blended wing-body configuration at flow conditions dominated by vortices and separation. The computed results are validated with the available experimental data. Sustained aeroelastic oscillations observed in the wind tunnel are successfully simulated for freestream Mach = 0.975, alpha of 8.0 deg, and a frequency of about 2 Hz.

Guruswamy, Guru P.↗
NASA NTRS1988

A general-purpose approach to computer-aided dynamic analysis of a flexible helicopter

A general purpose mathematical formulation is described for dynamic analysis of a helicopter consisting of flexible and/or rigid bodies that undergo large translations and rotations. Rigid body and elastic sets of generalized coordinates are used. The rigid body coordinates define the location and the orientation of a body coordinate frame (global frame) with respect to an inertial frame. The elastic coordinates are introduced using a finite element approach in order to model flexible components. The compatibility conditions between two adjacent elements in a flexible body are imposed using a Boolean matrix, whereas the compatibility conditions between two adjacent bodies are imposed using the Lagrange multiplier approach. Since the form of the constraint equations depends upon the type of kinematic joint and involves only the generalized coordinates of the two participating elements, then a library of constraint elements can be developed to impose the kinematic constraint in an automated fashion. For the body constraints, the Lagrange multipliers yield the reaction forces and torques of the bodies at the joints. The virtual work approach is used to derive the equations of motion, which are a system of differential and algebraic equations that are highly nonlinear. The formulation presented is general and is compared with hard-wired formulations commonly used in helicopter analysis.

Agrawal, Om P.↗