Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLOW STRESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Designing Nanoscale Precipitates in Novel Cobalt-based Superalloys to Improve Creep Resistance and Operating Temperature

High-temperature structural alloys for aerospace and energy applications have long been dominated by Ni-base superalloys, whose strength and creep resistance can be attributed to microstructures consisting of a large volume fraction of ordered (L1 2 ) γ'-precipitates embedded in a disordered’(f.c.c.) γ-matrix. These alloys exhibit excellent mechanical behavior and thermal stability, but after decades of incremental improvement are nearing the theoretical limit of their operating temperatures. Conventional Co-base superalloys are solid-solution or carbide strengthened; although they see industrial use, these alloys are restricted to lower-stress applications because the absence of an ordered intermetallic phase places an upper limit on their mechanical performance. In 2006, a γ+γ' microstructure with ordered precipitates analogous to (L1 2 ) Ni 3 Al was first identified in the Co-Al-W ternary system, allowing, for the first time, the development of Co-base alloys with the potential to meet or even exceed the elevated-temperature performance of their Ni-base counterparts. The potential design space for these alloys is complex: the most advanced Ni-base superalloys may contain as many as 8-10 minor alloying additions, each with a specified purpose such as raising the γ' solvus temperature or improving creep strength. Our work has focused on assessing the effects of alloying additions on microstructure and mechanical behavior of γ'-strengthened Co-base alloys in an effort to lay the foundations for understanding this emerging alloy system. Investigation of the size, morphology, and composition of γ' and other relevant phases is investigated utilizing scanning electron microscopy (SEM) and 3-D picosecond ultraviolet local electrode atom probe tomography (APT). Microhardness, compressive yield stress at ambient and elevated temperatures, and compressive high-temperature creep measurements are employed to extract mechanical behavior. First-principle calculations have been employed to predict the stability of Co 3 (Al 0.5 ,W 0.5 ) as well as to estimate important physical parameters, such as the anti-phase boundary (APB) energy, in this system. Additionally, 2D dislocation dynamics modeling has been employed to predict the effect of γ' precipitate size and volume fraction on the critical resolved shear stress of model Ni-base superalloy systems (for which experimental data are readily available in the archival literature) as well as for the case of model Co-base superalloys. Investigations of the ternary Co-Al-W system were carried out to establish baseline values for the composition, size, morphology, and volume fraction of the strengthening γ' precipitates with respect to aging time and temperature. The addition of grain-boundary strengtheners B and Zr were investigated and found to improve creep strength compared to ternary Co-Al-W, which suffers from brittle grain boundaries. Incorporation of Ni to extend the γ+γ' two-phase field coupled with systematic replacement of Ti for Al and W was shown to raise the γ' volume fraction and solvus temperature, while reducing the bulk alloy density by enabling a reduction in W content. Ti additions also promoted dramatic improvements in both room temperature flow stress as well as the magnitude of the anomalous flow behavior leading to substantial strength increases in the range 650 – 800 °C.

36 MATERIALS SCIENCE↗

Production of Ultra-Light Normal Incidence Mirrors

Mirrors fabrication for large aperture telescopes is an important aspect in space exploration programs. One of the cost effective techniques to obtain such mirrors is electroplating of Ni-Co alloys from sulfamate solution. The Center for Irradiation of Materials at Alabama A&M University - Research Institute has been involved in a NASA-MSFC project for producing ultra-light Ni-Co alloy mirrors since the summer of year 2000. The goal of this project is to obtain ultra-light, high strength electroformed large aperture normal incidence replicated mirrors, (weighting less than 5 kg/m2), free of stress, with a good figure and reproducible thickness variation. In order to simplify the control of parameters such as temperature gradient, concentration gradient, distribution of the electric field lines and flow control, the proposed geometry involves a cylindrical main tank contained in another cylindrical tank, which plays the role of a weir. Designs were created to accommodate the new horizontal position of the mandrel and the pipes fitting through the outer tank's lid. The inner tank contains the working electrodes and a series of sensors for monitoring temperature, flow, stress and pH. The outer tank holds the electric heaters, the filters and a part of the piping system. Another two tanks complete the setup and serve for rinsing/preheating and equilibrating the electroplating bath. This paper will describe advantages of the new experimental setup and the parameters achieved in the electroplating bath for the proposed geometry.

Jones, Ruth↗

Turbulence Measurements on a 2D NACA 0036 with Synthetic Jet Flow Control

An active flow control experiment was conducted on a 2-ft chord NACA 0036 airfoil in a 3-ft by 4-ft Wind Tunnel at Re = 1 x 10(exp 6). The model was equipped with synthetic jet actuators at x/c = 0.30 and 0.65 that provided 120 Hz periodic excitation at a C(sub mu) 0.86% through 0.06-in wide slots. Three different slot con gurations were tested, including a baseline with no slots. Surface pressure data was collected to compare to previous tests and to combine with turbulence data to aid future CFD modeling efforts. Turbulence data, measured by hot-wire, was compared with and without flow control. Pressure data corroborates previous test data and provides more points for CFD validation. Hot-wire results showed ow control reduced the separated wake size and brought the high Reynolds stress shear layer closer to the airfoil surface. The position of this layer to the surface was altered more significantly than the magnitude of the peak stresses. Flow control was shown to increase turbulent energy in the attached boundary layer downstream of the slot but to have little effect upstream. These results provide further justification to continue assessing the potential of active flow control to reduce drag of helicopter airframe components.

Wilson, J. S.↗

Enhanced Firn Densification in High‐Accumulation Shear Margins of the NE Greenland Ice Stream

Firn thickness across the NE Greenland Ice Stream is a function of accumulated strain, with thinner firn in the high‐strain margins of the ice stream. We present a novel technique for extracting firn density from previously collected seismic reflection profiles and apply this technique across both shear margins of NE Greenland Ice Stream. Firn is up to 30 m thinner in the vicinity of the ice stream shear margins. Snow accumulation rates across the ice stream were calculated from airborne ice‐penetrating radar data, calibrated with ground‐based firn density measurements from a shallow core. We find that accumulation is ~20% higher in the shear margins compared to the surroundings. The higher density firn adjacent to shear margins is due to high along‐flow stresses that accelerate firn densification and develops despite the higher accumulation rate favoring lower density. These firn density variations influence subglacial hydropotential by changing the ice surface slope and overburden pressure and may influence subglacial water flow. These results demonstrate the importance of high‐resolution firn surveys in studies of shear‐margin dynamics.

ice stream↗

Stress effects on flow and transport in three-dimensional fracture networks

We investigate the effects of various external stress regimes on fracture apertures, fluid flow, and solute transport in three-dimensional fracture networks. We use well-established geomechanics equations coupled with discrete fracture network modeling to characterize changes in primary flow paths within a complex network as a function of stress magnitude and orientation. These changes manifest in the alterations of the fluid flow field and are measured in terms of Eulerian and Lagrangian flow observables including solute transport, which is a key problem in many hydrologic applications. Changes in primary flow paths affect the solute transport in the network by promoting anomalously early arrival or long tailing behavior. However, early time arrival is not ubiquitous in anisotropically stressed networks and in most cases there is a delayed arrival of solute, which is attributed to (i) the presence of low-velocity zones normal to the flow direction, (ii) the angle between flow direction and major compressive principal stress directions, and (iii) changes in the primary flow paths (i.e., increases in tortuosity and active network structure). Overall, flows become more channelized in anisotropically stressed fracture networks than in unstressed and isotropically stressed networks.

58 GEOSCIENCES↗

Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data

Crystal plasticity models evolve a polycrystalline yield surface using meso-scale descriptions of deformation mechanisms. The activation of deformation mechanisms is governed by crystallography and a set of model parameters, which are typically calibrated through the fitting of mechanical data such as stress–strain curves and elastic lattice strains. Microstructural data such as phase fractions and texture evolution are used for verifying crystal plasticity parameters. In this study, we use a multi-objective genetic algorithm to identify hardening parameters from flow stress curves with an option to incorporate texture into the optimization approach. Robust, generalized objective functions are developed and used to identify sets of parameters pertaining to dislocation density-based hardening laws in visco-plastic and elasto-plastic self-consistent (VPSC and EPSC) homogenization models. First, the parameters are identified for pure Nb directly from texture using an objective function based on generalized spherical harmonics. Since texture evolution is driven by the relative contribution of active slip systems, the parameters governing the evolution of slip resistance ratios can be recovered from fitting discrete textures at a series of strains. Next, a comprehensive set of load reversal data for dual phase (DP) 780 steel is used to fit a hardening law and a back-stress law in EPSC. Finally, parameters pertaining to a complex hardening law for the evolution of slip and twinning in pure α-Ti are identified. Remarkably, using texture as an objective in combination with stress–strain objectives constrains the model of Ti to fully reproduce not only stress–strain and texture evolution but also hierarchical twinning measurements as a function of initial grain size and texture. Furthermore, given an appropriate model fit to representative experimental texture evolution, underlying twin volume fractions contributing to texture evolution can be predicted.

42 ENGINEERING↗

A fully coupled thermal–microstructural–mechanical finite element process model for directed energy deposition additive manufacturing of Ti–6Al–4V

A fully coupled thermal–microstructural–mechanical finite element modelling framework is developed to investigate the distortion and residual stresses during directed energy deposition (DED) of multi-phase Ti–6Al–4V alloy. The Johnson–Cook constitutive model is used to predict the yield strength of each phase as a function of strain, strain rate and temperature where the flow stress is calculated by a linear mixing rule based on the volumetric phase fractions. A thin-walled rectangular sample is chosen as the reference geometry and the results are compared with experimentally measured in situ thermal history and distortion data, where a reasonable agreement is achieved. The proposed modelling framework with physics-based material constitutive model provides useful information for a better understanding of process–microstructure–property relations in additive manufacturing by DED.

Tunay, Merve↗

Does a threshold stress for creep exist in HfC-dispersed NiAl?

Recently it was proposed (Jha et al., 1989; Whittenberger et al., 1990) on the basis of constant velocity testing at 1300 K that dispersion strengthened NiAl composites containing about 4 wt pct HfC possess threshold stresses for creep. Further, 1300 K compression testing has been conducted on NiAl+4HfC, and diametrically opposite behavior has been found: for constant load creep tests a normal power law behavior was observed. However, additional constant velocity testing still indicates that the flow stress is essentially independent of strain rate below 10 exp -6/s. Examination of NiAl+4.3HfC specimens deformed under constant velocity conditions revealed that the original hot extruded small grain structure could be converted to large, elongated grains during testing. Such a transformation appears to be responsible for the apparent threshold stress behavior in HfC dispersed NiAl.

Whittenberger, J. D.↗

In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel

In situ neutron diffraction measurements were completed for this study during tensile and compressive deformation of stainless steel 304L additively manufactured (AM) using a high power directed energy deposition process. Traditionally produced wrought 304L material was also studied for comparison. The AM material exhibited roughly 200 MPa higher flow stress relative to the wrought material. Crystallite size, crystallographic texture, dislocation density, and lattice strains were all characterized to understand the differences in the macroscopic mechanical behavior. The AM material’s initial dislocation density was about 10 times that of the wrought material, and the flow strength of both materials obeyed the Taylor equation, indicating that the AM material’s increased yield strength was primarily due to greater dislocation density. Finally, a ~50 MPa flow strength tension/compression asymmetry was observed in the AM material, and several potential causes were examined.

36 MATERIALS SCIENCE↗

Numerical methodology for treating static and dynamic dislocation problems near a free surface

Abstract Simulation of dislocation dynamics enables researchers and scientists to explore the plastic behavior of crystalline materials under loading. Analytic solutions for the stress field due to a linear dislocation segment near a free surface are case-specific, e.g. dealing with either a horizontal segment or a vertical segment, and therefore hard to implement in time-dependent dislocation dynamics simulations as different dislocation segments could be differently oriented. This article presents a generalized numerical framework to find the stress field beneath a free surface due to the presence of a dislocation segment. The framework can be expanded to non-flat surfaces. Also, three-dimensional discrete dislocation dynamics simulations are performed here, which clearly show the effect of free surfaces on the flow stress of a material.

Siddique, Abu Bakar↗

Simulation Tools for Characterizing Stress Distribution in Laser Welded Dissimilar Joints

This project focuses on developing a thermo-metallurgical-mechanical modeling method to accurately predict the microstructural evolution and residual stress in laser welding between dissimilar metals, such as HSLA steel and high carbon equivalent (CE) gear steel. The method leverages a comprehensive material database to model the temperature and rate dependent phase transformations, along with their associated effects on material properties, such as thermal expansion and flow stress, throughout the welding process. A key innovation is the incorporation of phase transformation and phase-specific properties, which enhances the accuracy of residual stress predictions. The mixture material in the fusion zone due to the dissimilar metals will also be addressed in the numerical model. This is especially critical in scenarios involving phase transformations in the fusion zone and heat-affected zone (HAZ), where the phase changes can induce substantial residual stress variations. The material database has been generated using JMatPro. The modeling approach is implemented through a custom User Material (UMAT) subroutine, executed with the commercial finite element software Abaqus.

36 MATERIALS SCIENCE↗

Simulation Tools for Characterizing Stress Distribution in Laser Welded Dissimilar Joints

This project focuses on developing a thermo-metallurgical-mechanical modeling method to accurately predict the microstructural evolution and residual stress in laser welding between dissimilar metals, such as HSLA steel and high carbon equivalent (CE) gear steel. The method leverages a comprehensive material database to model the temperature and rate dependent phase transformations, along with their associated effects on material properties, such as thermal expansion and flow stress, throughout the welding process. A key innovation is the incorporation of phase transformation and phase-specific properties, which enhances the accuracy of residual stress predictions. The mixture material in the fusion zone due to the dissimilar metals will also be addressed in the numerical model. This is especially critical in scenarios involving phase transformations in the fusion zone and heat-affected zone (HAZ), where the phase changes can induce substantial residual stress variations. The material database has been generated using JMatPro. The modeling approach is implemented through a custom User Material (UMAT) subroutine, executed with the commercial finite element software Abaqus.

36 MATERIALS SCIENCE↗

Interactions between creep, fatigue and strain aging in two refractory alloys

The application of low-amplitude, high-frequency fatigue vibrations during creep testing of two strain-aging refractory alloys (molybdenum-base TZC and tantalum-base T-111) significantly reduced the creep strength of these materials. This strength reduction caused dramatic increases in both the first stage creep strain and the second stage creep rate. The magnitude of the creep rate acceleration varied directly with both frequency and A ratio (ratio of alternating to mean stress), and also varied with temperature, being greatest in the range where the strain-aging phenomenon was most prominent. It was concluded that the creep rate acceleration resulted from a negative strain rate sensitivity which is associated with the strain aging phenomenon in these materials. (A negative rate sensitivity causes flow stress to decrease with increasing strain rate, instead of increasing as in normal materials). By combining two analytical expressions which are normally used to describe creep and strain aging behavior, an expression was developed which correctly described the influence of temperature, frequency, and A ratio on the TZC creep rate acceleration.

Sheffler, K. D.↗

Micropillar Tests of As-received and Irradiated FeCrAl C26M Alloys

The present report summarizes the efforts to investigate the deformation behavior of a FeCrAl C26M alloy before and after irradiation. In order to clarify the mechanical effects of radiation-induced defects along different crystallographic orientations, micropillars with the dimension of 600 nm in diameter and 1.3 um in height have been fabricated inside grains with different orientations. When compressed along [001] direction, it was found that the yield stress has increased from 630 MPa to 750 MPa at an average dpa level of 1 (peak dpa ~ 2.7), and to 850 MPa at 16 average dpa (peak dpa ~ 42.7). In addition, due to the appearance of radiation-induced defects, strain hardening response has been changed as well. Especially, when the flow stressis lower than 1.5 GPa, hardening response has been captured, which is due to the collective interaction of various shear bands. However, when the flow stress increases to larger than 1.5 GPa, another mode of shear band has been captured. The correlated process is at least ten times faster, corresponding to the sudden load drop in the stress strain plot. When the compression has been applied along [011] and [111] direction, the increase of yield stress after irradiation has also been captured. However, the correlated magnitude is different: yield stress of [011] increases from 500 MPa to 700 MPa at 1 dpa and to 1200 MPa at 16 dpa. On the other hand, when the compressive loading has been employed along [111], the correlated yield stress changes from 500 MPa to 700 MPa at 1 dpa and to 1400 MPa at 16 dpa. Moreover, the second mode of shear band has also been recorded in the 16 dpa irradiated sample when stress applied along [011], but not shown along [111] direction.

36 MATERIALS SCIENCE↗

Interactions between creep, fatigue, and strain-aging in two refractory metal alloys.

The application of low-amplitude, high-frequency fatigue vibrations during creep testing of two strain-aging refractory alloys (molybdenum-base TZC and tantalum-base T-111) significantly reduced the creep strength of these materials. This strength reduction caused dramatic increases in both the first-stage creep strain and the second-stage creep rate. The magnitude of the creep rate acceleration varied directly with both frequency and A ratio (ratio of alternating to mean stress), and also varied with temperature, being greatest in the range where the strain-aging phenomenon was most prominent. It was concluded that the creep rate acceleration resulted from a negative strain rate sensitivity which is associated with the strain-aging phenomenon in these materials. (A negative rate sensitivity causes flow stress to decrease with increasing strain rate, instead of increasing as in normal materials.)

Sheffler, K. D.↗

Chapter 21. Atomic-Level Dislocation Dynamics in Irradiated Metals

Primary damage and microstructure evolution in structural nuclear materials operating under conditions of a high flux of energetic atomic particles and high temperature and stress lead to the formation of a high concentration, non-homogeneous distribution of defect clusters in the form of dislocation loops, voids, gas-filled bubbles and radiation-induced precipitates of nanometer scale. They cause changes in many material properties. Being obstacles to dislocation glide, they strongly affect the mechanical properties, with an increase in yield and flow stresses and a reduction in ductility. Atomic-scale computer simulations can provide details of how these effects are influenced by the obstacle structure, applied stress, strain rate and temperature. Processes such as obstacle cutting, transformation, absorption and drag are observed. Some recent results for body-centered and face-centered cubic metals are described in this review and, where appropriate, comparisons are drawn with predictions based on the elasticity theory of crystal defects. Perspectives on how to use this information at higher scales and in particular in mesoscale, dislocation dynamics simulations are also discussed.

Osetskiy, Yury N.↗

Atomic-level level dislocation dynamics in irradiated metals

Primary damage and microstructure evolution in structural nuclear materials operating under conditions of a high flux of energetic atomic particles and high temperature and stress lead to formation of a high concentration, non-homogeneous distribution of defect clusters in the form of dislocation loops, voids, gas-filled bubbles and radiation-induced precipitates of nanometer scale. They cause changes in many material properties. Being obstacles to dislocation glide, they strongly affect mechanical properties in particular. This gives rise to an increase in yield and flow stress and a reduction in ductility. Atomic-scale computer simulation can provide details of how these effects are influenced by obstacle structure, applied stress, strain rate and temperature. Processes such as obstacle cutting, transformation, absorption and drag are observed. Some recent results for body-centered and face-centered cubic metals are described in this review and, where appropriate, comparisons drawn with predictions based on elasticity theory of crystal defects.

dislocations↗

Grain-Size-Independent Plastic Flow at Ultrahigh Pressures and Strain Rates

A basic tenet of material science is that the flow stress of a metal increases as its grain size decreases, an effect described by the Hall-Petch relation. This relation is used extensively in material design to optimize the hardness, durability, survivability, and ductility of structural metals. This work reports experimental results in a new regime of high pressures and strain rates that challenge this basic tenet of mechanical metallurgy. We report measurements of the plastic flow of the model body-centered-cubic metal tantalum made under conditions of high pressure (> 100 GPa) and strain rate (~10 7 s –1 ) achieved by using the Omega laser. Under these unique plastic deformation (“flow”) conditions, the effect of grain size is found to be negligible for grain sizes > 0.25 μm sizes. A multiscale model of the plastic flow suggests that pressure and strain rate hardening dominate over the grain-size effects. Theoretical estimates, based on grain compatibility and geometrically necessary dislocations, corroborate this conclusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗