Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field boundaries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Field-aligned current signatures in the near-tail region. I - ISEE observations in the plasma sheet boundary layer

Field-aligned currents in the near-tail region are examined using ISEE magnetometer data. Two substorms (the 1054 UT and the 1436 UT substorms on March 22, 1979) were examined, demonstrating the consistency of the current polarity and intensity with observations at lower altitudes, which suggests that field-aligned currents in the plasma sheet boundary layer are parts of the large-scale current system, the region-1 system. An examination of the steplike changes of the magnetic field direction, which correspond to the spacecraft crossing of a net field-aligned current, showed that the field-aligned currents in the plasma sheet boundary layer have the same polarity as the region-1 system.

Ohtani, S.↗
NASA NTRS2010

Direct Measurement Sensor of the Boundary Shear Stress in Fluid Flow

The flow fields and boundary erosion that are associated with scour at bridge piers are very complex. Direct measurement of the boundary shear stress and boundary pressure fluctuations in experimental scour research has always been a challenge and high spatial resolution and fidelity have been almost impossible. Most researchers have applied an indirect process to determine shear stress using precise measured velocity profiles. Laser Doppler Anemometry and Particle Image Velocimetry are common techniques used to accurately measure velocity profiles. These methods are based on theoretical assumptions to estimate boundary shear stress. In addition, available turbulence models cannot very well account for the effect of bed roughness which is fundamentally important for any CFD simulation. The authors have taken on the challenge to advance the magnitude level to which direct measurements of the shear stress in water flow can be performed. This paper covered the challenges and the efforts to develop a higher accuracy and small spatial resolution sensor. Also, preliminary sensor designs and test results are presented.

Badescu, Mircea↗
NASA NTRS1972

Some aspects of flare properties versus magnetic boundary morphology.

Flares often begin near lines of zero-longitudinal magnetic field. These boundary lines between opposite polarities can have the magnetic field either parallel to or transverse to the boundary. A study of 75 flares associated with one or the other type of boundary indicates that the difference in boundary morphology is not reflected in the frequency or properties of the associated flares.

Prata, S. W.↗
NASA NTRS1982

Boundary-layer effects in composite laminates. I - Free-edge stress singularities. II - Free-edge stress solutions and basic characteristics

The fundamental nature of the boundary-layer effect in fiber-reinforced composite laminates is formulated in terms of the theory of anisotropic elasticity. The basic structure of the boundary-layer field solution is obtained by using Lekhnitskii's stress potentials (1963). The boundary-layer stress field is found to be singular at composite laminate edges, and the exact order or strength of the boundary layer stress singularity is determined using an eigenfunction expansion method. A complete solution to the boundary-layer problem is then derived, and the convergence and accuracy of the solution are analyzed, comparing results with existing approximate numerical solutions. The solution method is demonstrated for a symmetric graphite-epoxy composite.

Wang, S. S.↗
DOE OSTI2025

The boundary entropy function for interface conformal field theories

In 1+1 dimensional conformal field theory with a boundary the boundary contribution to the entanglement entropy is determined by a single number g effectively counting the boundary degrees of freedom. In contrast, in 1+1 dimensional interface CFTs the corresponding quantity is a non-trivial function depending on the position of the interval relative to the interface, giving access to much more detailed information about the defect. In this work we determined this g -function in several examples using holography and derive some of its basic properties from holography and strong subadditivity.

AdS-CFT correspondence↗
DOE OSTI2020

Quantifying leakage fields at ionic grain boundaries using off-axis electron holography

The electrical properties of interfaces in semiconductors and ionic conductors are immensely important in a wide range of applications. Electron holography is ideally suited for the direct measurement of the electrostatic potential of such interfaces. A key challenge with this approach is the contribution of the leakage field from the sample to the observed electron phase shift. This leakage field cannot be a priori independently determined and can cause an overestimation of the phase shift. In this work, we use finite element simulations to compute the three-dimensional electrostatic potential in the vicinity of an interface associated with a given interfacial charge density distribution. We then evaluate the predicted phase shift and demonstrate that the leakage field strongly affects the recovery of the projected interface potential. From the difference between the true potential and uncorrected, recovered potential, we propose a method to correct for this effect. We then demonstrate the application of this methodology to the analysis of experimental off-axis electron holography data acquired from the grain boundaries in lightly doped ceria.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Experiments on the flow field physics of confluent boundary layers for high-lift systems

The use of sub-scale wind tunnel test data to predict the behavior of commercial transport high lift systems at in-flight Reynolds number is limited by the so-called 'inverse Reynolds number effect'. This involves an actual deterioration in the performance of a high lift device with increasing Reynolds number. A lack of understanding of the relevant flow field physics associated with numerous complicated viscous flow interactions that characterize flow over high-lift devices prohibits computational fluid dynamics from addressing Reynolds number effects. Clearly there is a need for research that has as its objective the clarification of the fundamental flow field physics associated with viscous effects in high lift systems. In this investigation, a detailed experimental investigation is being performed to study the interaction between the slat wake and the boundary layer on the primary airfoil which is known as a confluent boundary layer. This little-studied aspect of the multi-element airfoil problem deserves special attention due to its importance in the lift augmentation process. The goal of this research is is to provide an improved understanding of the flow physics associated with high lift generation. This process report will discuss the status of the research being conducted at the Hessert Center for Aerospace Research at the University of Notre Dame. The research is sponsored by NASA Ames Research Center under NASA grant NAG2-905. The report will include a discussion of the models that have been built or that are under construction, a description of the planned experiments, a description of a flow visualization apparatus that has been developed for generating colored smoke for confluent boundary layer studies and some preliminary measurements made using our new 3-component fiber optic LDV system.

Nelson, Robert C.↗
DOE OSTI2021

Spectrum of end of the world branes in holographic BCFTs

We study overlaps between two regularized boundary states in conformal field theories. Regularized boundary states are dual to end of the world branes in an AdS black hole via the AdS/BCFT. Thus they can be regarded as microstates of a single sided black hole. Owing to the open-closed duality, such an overlap between two different regularized boundary states is exponentially suppressed as $\langle$ψ a |ψ b $\rangle$~e -O (h$^{(min)}_{ab}$) , where h$^{(min)}_{ab}$ is the lowest energy of open strings which connect two different boundaries a and b. Our gravity dual analysis leads to h$^{(min)}_{ab}$ = c/24 for a pure AdS 3 gravity. This shows that a holographic boundary state is a random vector among all left-right symmetric states, whose number is given by a square root of the number of all black hole microstates. We also perform a similar computation in higher dimensions, and find that h$^{(min)}_{ab}$ depends on the tensions of the branes. In our analysis of holographic boundary states, the off diagonal elements of the inner products can be computed directly from on-shell gravity actions, as opposed to earlier calculations of inner products of microstates in two dimensional gravity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1985

Energetic particle observations in the low-latitude boundary layer

Energetic (approximately equal to or greater than 24 keV) particle three-dimensional distributions are presented, taking into account a dawnside (approximately 0515 LT) and duskside (approximately 1845 LT) traversal of the magnetopause boundary regions during periods of northward magnetosheath magnetic field. The boundary region traversed is identified as the low-latitude boundary layer (LLBL) on the basis of survey plasma data, the energetic particle distributions, and magnetic field behavior. The main features of the energetic particle data for these two passes are discussed. On the basis of an analysis of the obtained data, it is concluded that the dawn and dusk LLBL are on closed geomagnetic field lines. It is found that the plasma sheet is the main source of energetic LLBL particles. The possibility exists that the tailward convecting particles in the LLBL reenter the plasma sheet at some further distance in the tailward direction.

Williams, D. J.↗
DOE OSTI2024

On the holographic dual of a topological symmetry operator

We study the holographic dual of a topological symmetry operator in the context of the AdS/CFT correspondence. Symmetry operators arise from topological field theories localized on a subspace of the boundary conformal field theory spacetime. We use bottom up considerations to construct the topological sector associated with their bulk counterparts. In particular, by exploiting the structure of entanglement wedge reconstruction we argue that the bulk counterpart has a nontopological world volume action, i.e., it describes a dynamical object. As a consequence, we find that there are no global 𝑝-form symmetries for 𝑝 ≥ 0 in asymptotically anti–de Sitter spacetimes, which includes the case of noninvertible symmetries. Provided one has a suitable notion of subregion-subregion duality, our argument for the absence of bulk global symmetries applies to more general spacetimes. These considerations also motivate us to consider for general QFTs (holographic or not) the notion of lower-form symmetries, namely, (−𝑚)-form symmetries for 𝑚 ≥ 2.

quantum gravity↗
DOE OSTI2022

Modeling plasma response to non-axisymmetric magnetic field perturbations in tokamak boundaries

The primary goal of this project is to provide physics insight into models that elucidate the mechanisms responsible for controlling the performance of H-mode plasmas and edge localized mode (ELM) stability when subjected to intrinsic and applied non-axisymmetric magnetic perturbations. The overall goal is to facilitate the development of physics-based criteria for the design of magnetic coils to be used for ELM suppression and H-mode pedestal control in future burning plasma devices such as ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗