Search NASA⌕ Search

SEARCH · Search NASA

Results for “GAS DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Physical conditions in photodissociation regions: Application to galactic nuclei

Infrared and sub-millimeter observations are used in a simple procedure to determine average physical properties of the neutral interstellar medium in Galactic photodissociation regions as well as in ensembles of clouds which exist in the nuclei of luminous infrared galaxies. The relevant observations include the Infrared Astronomy Satellite (IRAS) infrared continuum measurements, infrared spectroscopy of the fine-structure lines of SiII 35 microns, OI 63 microns, and CII 158 microns, and the 2.6 mm CO (J=1-0) rotational transition. The diagnostic capabilities of the OI 145 microns line is also addressed. Researchers attribute these emission lines as well as the continuum to the atomic/molecular photodissociation region on the surfaces of molecular clouds which are illuminated by strong ultraviolet fields. They use the theoretical photodissociation region models of Tielens and Hollenbach (1985, Ap. J., 291, 722) to construct simple diagrams which utilize line ratios and line to continuum ratios to determine the average gas density n, the average incident far-ultraviolet flux G sub o, and the temperature of the atomic gas T.

Wolfire, M. G.↗

Ozone reduction in the 1980's - A model simulation of anthropogenic and solar perturbations

An interpretation of global ozone changes deduced from satellite data obtained since 1979 is presented, based on two-dimensional model simulations. The study shows that a depletion in total ozone of the order of 2 percent and a reduction in ozone density near 40 km of 7 to 12 percent over the 1979-1986 period are consistent with the observed increase in trace gas densities (chlorofluorocarbons, methane, nitrous oxide, carbon dioxide) and the simultaneous decrease in solar activity during this period. The model also suggests that ozone variations of solar and anthropogenic origins between 1979 and 1986 were of similar magnitude but that the ozone response to trace gas emissions increases substantially with latitude while the solar signal in ozone is present lower in the atmosphere and is nearly independent of latitude.

Brasseur, Guy↗

The 2175-A feature from irradiated graphitic particles

In diffuse clouds, a subpopulation of the carbon grains is graphitized by UV starlight during cloud lifetimes of roughly 100 Myr. Graphitic dust created in this way will behave like monosize Rayleigh particles and produce a 2175-A absorption band showing a Lorentzian profile. A physical model is outlined in which the strength and width of the band correlate with the dust grain environment, but the central wavelength is fixed by the Froehlich frequency for surface plasmons in a homogeneous sphere. On this model, the band appears strong and narrow only in dust clouds where the flux of UV starlight is high and the H atom gas density is low. The width of the band increases from diffuse to dense clouds mainly as a result of gas-phase H atoms accreted on to the grain surface. It is shown that hydrogenation weakens the band in dense clouds, and thus explains the anticorrelation between band strength and high carbon depletion. The model as a whole uses only 30 percent of the cosmic carbon and gives good agreement with observations of the 2175-A feature and the average interstellar extinction law.

Sorrell, Wilfred H.↗

Warm Absorbers in the ROSAT Spectra of Quasars

We present two ROSAT PSPC observations of the radio-loud, lobe-dominated quasar 3C 351, which shows an 'ionized absorber' in its X-ray spectrum. The factor 1.7 change in flux in the approx. 2 years between the observations allows a test of of models for this ionized absorber. The absorption feature at approx. 0.7 keV (quasar frame) is present in both spectra but with a lower optical depth when the source intensity - and hence the ionizing flux at the absorber - is higher, in accordance with a simple, single-zone, equilibrium photoionization model. Detailed modeling confirms this agreement quantitatively. The maximum response time of 2 years allows us to limit the gas density: n(sub e) greater than 2 x 10(exp 4)cm(exp -3); and the distance of the ionized gas from the central source R less than 19 pc. This produces a strong test for a photoionized absorber in 3C 351: a factor 2 flux change in approx. 1 week in this source must show non-equilibrium effects in the ionized absorber.

Fiore, Fabrizio↗

Sublimation of Laboratory Ices Millimeter/Submillimeter Experiment (SubLIME): Structure-Specific Identifications of Products from UV-photolyzed Methanol Ice

Submillimeter/far-IR spectroscopy was used to detect and quantify organic molecules sublimated after the ultraviolet photolysis (at 12 K) and warm-up (up to 300 K) of a methanol (CH3OH) ice sample. Eleven sublimated photoproducts were uniquely identified: carbon monoxide (CO), formaldehyde (H2CO), ketene (C2H2O), acetaldehyde (CH3CHO), ethylene oxide (CH2OCH2), vinyl alcohol (CH2CHOH), ethanol (CH3CH2OH), dimethyl ether (CH3OCH3), methyl formate (HCOOCH3), glycolaldehyde (HOCH2CHO), and acetone ((CH3)2CO). Two additional products were detected in the photolyzed ice by Fourier-transform infrared (FTIR) spectroscopy: carbon dioxide (CO2) and methane (CH4). The rotational temperatures and gas densities were calculated for the organics containing two or more C atoms via a rotation diagram analysis, and the gas-phase submillimeter/far-IR technique was used in tandem with mass spectrometry and FTIR spectroscopy of the ice during photolysis. The abundance ratios of the sublimated species (normalized to methanol) were compared to those observed in hot cores (Orion-KL, Sagittarius B2(N), and IRAS 16293-2422(B)) and in comets C/2014 Q2 (Lovejoy) and 67P/Churyumov–Gerasimenko.

K M Yocum↗

Sublimation of Laboratory Ices Millimeter/Submillimeter Experiment (SubLIME): Structure-Specific Identifications of Products from UV-photolyzed Methanol Ice

Submillimeter/far-IR spectroscopy was used to detect and quantify organic molecules sublimated after the ultraviolet photolysis (at 12 K) and warm-up (up to 300 K) of a methanol (CH3OH) ice sample. Eleven sublimated photoproducts were uniquely identified: carbon monoxide (CO), formaldehyde (H2CO), ketene (C2H2O), acetaldehyde (CH3CHO), ethylene oxide (CH2OCH2), vinyl alcohol (CH2CHOH), ethanol (CH3CH2OH), dimethyl ether (CH3OCH3), methyl formate (HCOOCH3), glycolaldehyde (HOCH2CHO), and acetone ((CH3)2CO). Two additional products were detected in the photolyzed ice by Fourier-transform infrared (FTIR) spectroscopy: carbon dioxide (CO2) and methane (CH4). The rotational temperatures and gas densities were calculated for the organics containing two or more C atoms via a rotation diagram analysis, and the gas-phase submillimeter/far-IR technique was used in tandem with mass spectrometry and FTIR spectroscopy of the ice during photolysis. The abundance ratios of the sublimated species (normalized to methanol) were compared to those observed in hot cores (Orion-KL, Sagittarius B2(N), and IRAS 16293-2422(B)) and in comets C/2014 Q2 (Lovejoy) and 67P/Churyumov–Gerasimenko.

K. M. Yocum↗

Low density aerothermodynamics studies performed by means of the tethered satellite system

Low density gas flow modeling and current ground wind-tunnel technologies are not presently able to produce fully reliable data concerning low density flow regimes. In order to answer some of these issues, the Shuttle Continuous Open Wind Tunnel (SCOWT) program has been proposed, which makes use of the tethered satellite system (TSS). SCOWT's objective is to investigate the energy and momentum transfer between the tethered satellite and its environmental medium within the range of the thermofluid-dynamic conditions experienced by TSS during its atmospheric flights. The feasibility and capability of SCOWT to perform low density aerothermodynamics studies are investigated. Some of the results, obtained by means of a tether simulation program, and the instrumentation and TSS design main requirements to meet SCOWT objectives are described.

Carlomagno, Giovanni M.↗

Detection of accreting gas toward HD 45677: A newly recognized, Herbig Be proto-planetary system

We report detection of high velocity, accreting gas toward the Be star with IR excess and bipolar nebula, HD 45677. High velocity (+200 to +400 km/s), variable column density gas is visible in all IUE spectra from 1979-1992 in transitions of Si II, C II, Al III, Fe III, Si IV, and C IV. Low-velocity absorption profiles from low oscillator-strength transitions of Si II, Fe II, and Zn II exhibit double-peaked absorption profiles similar to those previously reported in optical spectra of FU Orionis objects. The UV absorption data, together with previously reported analyses of the IR excess and polarization of this object, suggest that HD 45677 is a massive, Herbig Be star with an actively accreting circumstellar, proto-planetary disk.

Grady, C. A.↗

Thermal and pressure diffusion effects in high altitude flows

An apparently anomalous change in composition adjacent to a non-catalytic surface in an earlier DSMC calculation of a non-reacting gas mixture is shown to have been due to thermal diffusion. Both thermal and pressure diffusion can lead to species separation effects in the flow of gas mixtures, but are not generally included in Navier-Stokes formulations. Additional DSMC calculations are made for blunt-body and plume expansion flows using both a simple gas and an otherwise identical gas mixture. These test calculations indicate that the pressure distribution on the forward face of a blunt body is largely unaffected by the species separation in the stagnation region. The gas density in this region is significantly affected and there is a slight change in the heat transfer to the surface. The pressure distribution around the shoulder of the body is affected. Very large separations occur in the plume expansion of the gas mixtures and there is an order of magnitude increase in density in the backflow region for the mixture.

Bird, G. A.↗

IR line emission from dense photodissociation regions

The results of the study on the molecular and fine structure line emission, from dense photodissociation regions, are discussed. The work is focused on the prediction of the line emission from CO and H2 molecules. It is found that, when the gas density is sufficiently high, self-shielding of the molecules can move the C(+)/CO and H/H2 transitions close to the surfaces of the molecular cloud where they can feel the full effect of heating by the ultraviolet radiation field. Collisional de-excitation of the H2 can move the lower levels towards low temperature emission producing an apparently shocked line ratio for two low-J levels, while the high-J levels retain a fluorescent value. Appreciable emission in high-J CO molecules originates in this warm molecular gas. Comparison with observation suggests that high density clumps are a common phenomena in photodissociation regions.

Burton, M.↗

Abundances of O, Mg, S, Cr, Mn, Ti, Ni and Zn from absorption lines of neutral gas in the Large Magellanic Cloud in front of R136

Weak absorption lines of C I, O I, Mg I, Mg II, Si I, Si II, P I, Cl I, Cr II, Mn II, Fe I, Ni II, Zn II, CO and C2 are detected in neutral gas in front of the 30 Doradus H II region by IUE spectra of R 136. The Large Magellanic Cloud abundances from the absorption lines are a factor of 2 or 3 below those of the Milky Way, in agreement with emission line study results. Neutral gas density and temperature are estimated from the observed excitation and ionization to be about 300/cu cm and 100 K, respectively; this implies a gas pressure of 30,000/cu cm K.

De Boer, K. S.↗

Detection of accreting gas toward HD 45677 - A newly recognized, Herbig Be proto-planetary system

We report the detection of high-velocity, accreting gas toward the BE(e) star with IR excess and bipolar nebula, HD 45677. High-velocity (+200 to +400 km/s), variable column density gas is visible in all IUE spectra from 1979 to 1992 in transitions of Si II, C II, Al III, Fe III, Si IV, and C IV. Low-velocity absorption profiles from low oscillator strength transitions of Si II, Fe II, and Zn II exhibit double-peaked absorption profiles similar to those previously reported in optical spectra of FU Orionis objects. The UV absorption data, together with previously reported analyses of the IR excess and polarization of this object, suggest that HD 45677 is a massive, Herbig Be star with an actively accreting circumstellar, protoplanetary disk.

Grady, C. A.↗

Development of a wide bandwidth heterodyne dispersion interferometer for electron density measurement of atmospheric pressure plasmas

One of the challenges of electron density measurements of an atmospheric pressure plasma (APP) with a laser interferometer is the significant and unwanted phase shift caused by changes in the neutral gas density. These unwanted phase shifts can be mitigated and plasma density measured using an interferometer architecture called a dispersion interferometer (DI). A DI is composed of two nonlinear orientation patterned GaAs crystals for frequency doubling and measures the phase shift induced by a plasma in the interference signal between two second-harmonic beams. Measurement of plasma dynamics or a short plasma pulse in less than a millisecond is enabled with heterodyne detection in a DI using an acousto-optic cell with a frequency of 40 MHz. This heterodyne DI (HDI) is targeted to measure APPs in an electron density range of 10 20 –10 24 m −3 . Finally, the HDI achieves a line-integrated density resolution of 2 × 10 15 m −2 (a phase resolution of 0.005°) with a time constant of 1 μs using ensemble averaging techniques.

atmospheric pressure plasma↗

Lick optical spectra of quasar HS 1946+7658 at 10 kilometers per second resolution Lyman-alpha forest and metal absorption systems

We present optical spectra of the most luminous known quasi stellar object (QSO) HS 1946+7658 (z(sub em) = 3.051). Our spectra have both full wavelength coverage, 3240-10570 A, and in selected regions, either high signal-to-noise ratio, SNR approximately equals 40-100, or unusually high approximately 10 km/sec resolution, and in parts of the Ly alpha forest and to the red of Ly alpha emission they are among the best published. We find 113 Ly alpha systems and six metal-line systems, three of which are new. The metal systems at z(sub abs) = 2.844 and 3.050 have complex velocity structure with four and three prominent components, respectively. We find that the system at z(sub abs) = 2.844 is a damped Ly alpha absorption (DLA) system, with a neutral hydrogen column density of log N(H I) = 20.2 +/- 0.4, and it is the cause of the Lyman limit break at lambda approximately equals 3520 A. We believe that most of the H I column density in this system is in z(sub abs) = 2.8443 component which shows the strongest low-ionization absorption lines. The metal abundance in the gas phase of the system is (M/H) approximately equals -2.6 +/- 0.3, with a best estimate of (M/H) = -2.8, with ionizaion parameter log gamma = -2.75, from a photoionization model. The ratios of the logarithmic abundances of C, O, Al, and Si are all within a factor of 2 of solar, which is important for two reasons. First, we believe that the gas abundances which we measure are close to the total abundances, because the ratio of aluminum to other elements is near cosmic, and Al is a refractory element which depletes very readily like chromium, in the interstellar medium. Second, we do not see the enhancement of O with respect to C of (O/C) approximately equals 0.5-0.9 reported in three partial Lyman limit systems by Reimers et al. (1992) and Vogel & Reimers (1993); we measure (O/C) = -0.06 for observed ions and (O/C) approximately equals 0.2 after ionization corrections, which is consistent with solar abundances. We see C II*(lambda 1335) offset by 15 km/sec with respect to C II(lambda 1334), presumably because the gas density varies from 2 to 8 cm(exp -3) with changing velocity in the DLA system. These densities imply that the damped component is 6-25 pc thick, which is reasonable for a single cloud in a cold spiral disk. They also imply that the cloud is relatively highly ionized with more C III than C II, more O III than O I, and log N(H I) = 20.72, which is 3 times the H I column. The system at z(abs) = 1.7382 is also believed to be damped with N(H I) approximately equals 10(exp 21) cm(exp -2), because we see Cr II, but its Ly alpha line will never be seen because it is below the Lyman limit of the other DLA system. We see a 2.6 sigma lack of Ly alpha forest lines well away from the QSO redshift, which may be a chance fluctuation. We also see a correlation between column density N(H I) and Doppler parameter b for 96 unsaturated Ly Alpha forest absorption lines, and although this correlation persists in the 36 Ly alpha lines which lie in regions where the SNR approximately equals 8-16, we agree with Rauch et al. (1993) that it is probably a bogus effect of low supernova remnant (SNR). The same applies to lines with very low b values: in regions where SNR less than or equal to 8 we see many Ly alpha lines which appear to have 10 less than or equal to b less than or equal to 20, but when 8 less than or equal to SNR less than or equal to 16 we see only one line with b less than or equal to 15 km/sec, and two others which we believe have b less than or equal to 20, with values of 20 and 16 km/sec. Traditional Ly alpha line samples which include all lines which have W/sigma(W) greater than or equal to 4 are not adequate to explore the distribution of the properties of individual clouds, because we need much higher (W/sigma(W)) and SNR to avoid the strong biases.

Fan, Xiao-Ming↗

Time resolved density measurements in premixed turbulent flames

Premixed, turbulent flames are important in connection with investigations of fundamental, turbulent-reacting-flow processes and the study of practical combustion devices, such as spark ignition engines and premixed, prevaporized gas turbine combustors which burn premixed reactants. The considered investigation is concerned with the application of laser induced Rayleigh scattering to measure the gas density in premixed, methane-air flames. A description is provided of the results of density and velocity measurements in an open, lean, premixed methane-air flame stabilized in grid turbulence of low Reynolds number. It is found that where applicable, Rayleigh scattering can be used to good advantage to measure molecular number density. Mean and rms density results show that the mean flame thickens with axial distance but that the maximum in rms does not change appreciably.

Dandekar, K. V.↗

Observations of lunar atmosphere.

A cold cathode ionization gauge was left on the lunar surface by the Apollo 14 astronauts to measure the neutral gas density on the moon. The gauge has detected the presence of a very low concentration of atmospheric particles at night, about 200,000 per cu cm. Gas clouds of locally greater concentrations have been observed at times, and, while the possibility that these are artifacts associated with the Apollo hardware cannot be conclusively ruled out, the clouds appear to be of natural origin. Contaminant gases due to the Apollo operation dominate during the lunar day, but these may dissipate within a few months.

Johnson, F. S.↗

SAS 3 observations of Cygnus X-1 - The intensity dips

In general, the dips are observed to occur near superior conjunctions of the X-ray source, but one pair of 2-minute dips occurs when the X-ray source is closer to the observer than is the supergiant companion. The dips are analyzed spectrally with the aid of seven energy channels in the range 1.2-50 keV. Essentially, there is no change in the spectral index during the dips. Reductions in the count rates are observed at energies exceeding 6 keV for some of the dips, but the dip amplitude is always significantly greater in the 1.2-3 keV band. It is believed that absorption by partially ionized gas may best explain these results, since the observations of Pravdo et al. (1980) rule out absorption by unionized material. Estimates for the intervening gas density, extent, and distance from the X-ray source are presented. Attention is also given to the problems confronting the models for the injection of gas through the line of sight, believed to be inclined by approximately 30 deg from the binary pole.

Remillard, R. A.↗

Heterodyne method for high specificity gas detection.

This paper describes a new technique for measuring trace quantities of gases. The technique involves the use of a reference cell (containing a known amount of the gas being sought) and a sample cell (containing an unknown amount of the same gas) wherein the gas densities are modulated. Light passing through the two cells in sequence is modulated in intensity at the vibrational-rotational lines characteristic of the absorption spectrum for the gas of interest. Since the absorption process is nonlinear, modulating the two absorption cells at two different frequencies gives rise to a heterodyning effect, which in turn introduces sum and difference frequencies in the detected signal. Measuring the ratio of the difference frequency signal for example, to the signal introduced by the reference cell provides a normalized measure of the amount of the gas in the sample cell. The readings produced are thereby independent of source intensity, window transparency, and detector sensitivity. Experimental evaluation of the technique suggests that it should be applicable to a wide range of gases, that it should be able to reject spurious signals due to unwanted gases, and that it should be sensitive to concentrations of the order of 10 to the minus 8th power when used with a sample cell of only 20 cm length.

Dimeff, J.↗