Search NASA⌕ Search

SEARCH · Search NASA

Results for “General aviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Input/output models for general aviation piston-prop aircraft fuel economy

A fuel efficient cruise performance model for general aviation piston engine airplane was tested. The following equations were made: (1) for the standard atmosphere; (2) airframe-propeller-atmosphere cruise performance; and (3) naturally aspirated engine cruise performance. Adjustments are made to the compact cruise performance model as follows: corrected quantities, corrected performance plots, algebraic equations, maximize R with or without constraints, and appears suitable for airborne microprocessor implementation. The following hardwares are recommended: ignition timing regulator, fuel-air mass ration controller, microprocessor, sensors and displays.

Sweet, L. M.↗
NASA NTRS1985

Aircraft noise annoyance at three joint air carrier and general aviation airports

The results of social surveys conducted near three airports that support both general aviation and scheduled air carrier operations are presented and discussed. Inferences supported by these data include: (1) the nature of noise exposure and community reaction at smaller airports may differ from that at larger airports; (2) survey techniques are capable of identifying changes in annoyance associated with numerically small changes in noise exposure; (3) changes in the prevalence of annoyance are causally produced by changes in noise exposure; and (4) changes in annoyance associated with changes in exposure vary with time.

Fidell, S.↗
NASA NTRS1994

The Balsa bullet: A high speed, low-cost general aviation aircraft for Aeroworld

The Balsa Bullet is a high speed, low cost six passenger general aviation aircraft. It will cruise at a speed of 55 ft/s with a maximum speed of 75 ft/s for distances in excess of 27000 feet. This range and speed combination provide The Balsa Bullet with the capability to service any two existing airports in Aeroworld in an efficient and timely manner. Overall, three major design drivers have been identified by the design team. The first is to provide a low cost airplane to the Aeroworld market. Maintaining the low cost objective will not simply meet the mission objective, but will also make the Bullet an economically viable option for a wide number of consumers. The Balsa Bullet has a total manufacturing cost of $1000 with a price to the consumer of only $2562. The second major driver is high speed performance. Once again this driver exists not only to meet the mission objective given Long Shot Aeronautics but it provides a desirable feature to the consumer, pride in owning the fastest aircraft in Aeroworld. The third design driver identified is the capability to service any runway in Aeroworld necessitating the ability to takeoff within 28 ft, the length of the shortest runways in Aeroworld. These design drivers provide three great reasons for the general public to purchase a Bullet.

Eastland, Kevin↗
NASA NTRS1976

Sources and characteristics of interior noise in general aviation aircraft

A field study was conducted to examine the interior noise characteristics of a general aviation aircraft. The goals were to identify the major noise sources and their relative contribution and to establish the noise transmission paths and their relative importance. Tests were performed on an aircraft operating under stationary conditions on the ground. Results show that the interior noise level of light aircraft is dominated by broadband, low frequencies (below 1,000 Hz). Both the propeller and the engine are dominant sources, however, the contribution from the propeller is significantly more than the engine at its fundamental blade passage frequency. The data suggest that the airborne path is more dominant than the structure-borne path in the transmission of broadband, low frequency noise which apparently results from the exhaust.

Catherines, J. J.↗
NASA NTRS1976

On the applicability of integrated circuit technology to general aviation orientation estimation

The criteria of the significant value of the panel instruments used in general aviation were examined and kinematic equations were added for comparison. An instrument survey was performed to establish the present state of the art in linear and angular accelerometers, pressure transducers, and magnetometers. A very preliminary evaluation was done of the computers available for data evaluation and estimator mechanization. The mathematical model of a light twin aircraft employed in the evaluation was documented, the results of the sensor survey and the results of the design studies were presented.

Debra, D. B.↗
NASA NTRS1981

Use of Loran-C for general aviation aircraft navigation

Quantitative and qualitative observations were made on the Loran-C in general aviation aircraft. The evaluation of Loran-C for both cross country flights and nonprecision approaches was conducted under simulated instrument flight rules conditions. Particular emphasis was placed on the reliability and failure of Loran-C equipment as well as its susceptibility to atmospheric effects such as P static. Efforts were made to quantify the long term stability of the Loran-C time difference grid. Several E field antenna configurations were also evaluated in terms of performance. Significant results are reported.

Natarajan, K.↗
NASA NTRS1986

Exploratory wind-tunnel investigation of the stability and control characteristics of advanced general aviation configurations

Results of low-speed wind-tunnel investigations are presented for two general aviation configurations: the AVTEK canard configuration and the DeVore conventional configuration. Cooperative research programs were undertaken by industry and NASA to jointly conduct tests in the NASA Langley 12-Foot Low-Speed Wind Tunnel to explore stability and control characteristics of each configuration. A 1/5-scale AVTEK model and a 1/6-scale DeVore model were tested over an angle-of-attack range of up to 45 deg and an angle-of-sideslip range of up to 20 deg. Results from the AVTEK test are presented with an emphasis on the effects of configuration on the stall and poststall characteristics. Results from the DeVore test are presented with emphasis on the effects of wing leading-edge droop design on spin resistance characteristics.

Yip, L. P.↗
NASA NTRS2003

Advanced Propulsion System Studies for General Aviation Aircraft

This final report addresses the following topics: Market Impact Analysis (1) assessment of general aviation, including commuter/regional, aircraft market impact due to incorporation of advanced technology propulsion system on acquisition and operating costs, job creation and/or manpower demand, and future fleet size; (2) selecting an aircraft and engine for the study by focusing on the next generation 19-passenger commuter and the Williams International FJ44 turbofan engine growth. Propulsion System Analysis Conducted mission analysis studies and engine cycle analysis to define a new commuter mission and required engine performance, define acquisition and operating costs and, select engine configuration and initiated preliminary design for hardware modifications required. Propulsion System Benefits (1) assessed and defined engine emissions improvements, (2) assessed and defined noise reduction potential and, (3) conducted a cost analysis impact study. Review of Relevant NASA Programs Conducted literature searches using NERAC and NASA RECON services for related technology in the emissions and acoustics area. Preliminary Technology Development Plans Defined plan to incorporate technology improvements for an FJ44-2 growth engine in performance, emissions, and noise suppression.

Eisenberg, Joseph D.↗
NASA NTRS1965

Operational Experiences of General Aviation Aircraft

An investigation is currently under way to determine the operational practices and load experiences of general aviation aircraft performing five basic types of operations: twin-engine executive, single-engine executive, personal, instructional, and commercial survey. Limited data obtained to date from aircraft engaged in these operations indicate that aircraft are generally being operated within the limits to which they were designed.

Jewel, Joseph W., Jr.↗
NASA NTRS1971

Advanced general aviation propeller study

Methods for predicting the performance, noise, weight, and cost of propellers for advanced general aviation aircraft of the 1980 time period were developed and computerized. This basic program was refined to incorporate a method of including the blade shape parameter, integrated design lift coefficient. This method and a reverse thrust computational procedure were included in the computer program. The weight equation was refined and also incorporated in the computer program. A User's Manual which includes a complete listing of this computer program with detailed instructions on its use has been written.

Worobel, R.↗
NASA NTRS1975

Optically coupled digital altitude encoder for general aviation altimeters

An optically coupled pressure altitude encoder which can be incorporated into commercially available inexpensive general aviation altimeters was successfully developed. The encoding of pressure altitude is accomplished in 100-ft (30.48-m) increments from -1000 to 20,000ft (-304.8 to 6096 m). The prototype encoders were retrofitted into two different internal altimeter configurations. A prototype encoder was checked for accuracy of transition points and environmental effects. Each altimeter configuration, with the encoder incorporated, was laboratory tested for performance and was subsequently flight-tested over the specified altitude range. With few exceptions, the assembled altimeter-encoder met aeronautical standards for altimeters and encoders. Design changes are suggested to improve performance to meet required standards consistently.

Bryant, F. R.↗
NASA NTRS1976

A visual motion simulator for general aviation compensated within the nonlinear adaptive washout for actuator lag

A description is presented of the general aviation aircraft simulator recently acquired by the Langley Research Center, summarizing the complement of instruments, radio/navigation equipment, control loading, and other features. Emphasis is placed mainly on the two-degree-of-freedom motion drives developed for this simulator and the presentation of the dynamic response of the motion system (without washout) in terms of amplitude ratio and phase lag as a function of frequency. The nonlinear adaptive washout based on continuous steepest descent optimization presents cues in pitch rate, surge, roll rate, and sway, and allows for actuator lag compensation.

Ashworth, B. R.↗
NASA NTRS1976

Sources and characteristics of interior noise in general aviation aircraft

A field study has been conducted to examine the interior noise characteristics of a general aviation aircraft. The purposes of the study were to identify the major noise sources and their relative contribution and to establish the noise transmission paths and their relative importance. Tests were performed on an aircraft operating under stationary conditions on the ground. The results show that the interior noise level of light aircraft is dominated by broadband, low frequencies (below 1,000 Hz). Both the propeller and the engine are dominant sources; however, the contribution from the propeller is significantly more than the engine at its fundamental blade passage frequency. The data suggests that the airborne path is more dominant than the structure-borne path in the transmission of broadband, low-frequency noise which apparently results from the exhaust.

Catherines, J. J.↗