Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geostationary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The geostationary operational environmental satellite /GOES/ imaging communication system

The SMS/GOES Satellite obtains day and night weather information from synchronous geostationary orbit by means of (1) earth imaging, (2) collection of environmental data from ground based sensors, platforms, and (3) monitoring of the space environment. SMS-1 and SMS-2 have been in orbit for 17 months and 8 months, respectively, and are presently taking full earth disk images in the visible and infrared every 30 minutes. SMS-1 is positioned to cover the eastern portion of the U.S. while SMS-2 is positioned to cover the western portion. This paper provides a general overview of the imaging communication portions of the SMS/GOES, related to the image data encoding and transmission as well as the method of the data time multiplexing and the manner in which the scan line to line synchronization is achieved.

Baker, W. L.↗

Substorm generated fluxes of heavy ions at the geostationary orbit

Measurements of heavy energetic heavy ions present in the vicinity of the geostationary orbit of the ATS-6 satellite, taken with the aid of a solid-state detector telescope, are reported and analyzed. Data extracted from a single fairly isolated injection event (June 18, 1974) are examined: ions of Z not below 6 and energy above 4.0 MeV; energization of these heavy ions in the magnetosphere during substorm events; comparison of the heavy ion intensity and proton intensity; ratio of intensity of carbon ions and oxygen ions. The heavy ions are identified with oxygen for the most part. The heavy-ion spectrometer is described.

Fritz, T. A.↗

Three-axis attitude control for a geostationary satellite

The Applications Technology Satellite-6 was successfully launched into a geostationary orbit in May, 1974. Since that time, its attitude control subsystem has routinely demonstrated its ability to perform precision pointing and precision closed loop maneuvers. This paper describes the ATS-6 attitude control subsystem. The requirements imposed by the spacecraft mission objectives are outlined, and functional descriptions of the principal attitude control subsystem components and control laws are presented. The paper concludes with a summary comparison of in-orbit performance relative to its specified performance requirements.

Freeman, H. R.↗

Potential applications of digital, visible, and infrared data from geostationary environmental satellites

An hourly, digital data base from the Visible/Infrared Spin-Scan Radiometer (VISSR) instrument on the GOES-1 and SMS-2 geostationary satellites is described. Several examples of developmental applications of these quantitative digital data are presented. These include a review of recent attempts to develop products that are of use to meteorologists who provide services to aviation, agriculture, forestry, hydrology, oceanography, and climatology. The sample products include high resolution thermal gradients of land and ocean surfaces, thermal change analyses, fruit frost/freeze application, cloud-top altitude analysis, analysis of hurricane characteristics, and analyses of solar insolation.

Miller, D. B.↗

Geomagnetic pulsations observed simultaneously on three geostationary satellites

Simultaneous observations of magnetic pulsations have been made by three geostationary satellites carrying similar magnetometers and acting as an azimuthal array. Autospectral and cross-spectral analysis yields coherence and phase differences between the pulsations at the satellite positions. The majority of the data fit the Kelvin-Helmholtz generation mechanism. The azimuthal wave number changes sign near noon and corresponds to propagation away from noon. Usually, the wave number is less than 10 deg per degree of longitude. Later in the afternoon, however, strong pulsations are observed with low coherence, implying large wave numbers. This suggests an instability driven by a gradient in the intensity of energetic protons, which may be expected at this local time. The data also suggest that some of the observed phase difference between the azimuthal components is due to small separations in magnetic shell, whereas this is not the case for the radial components. This implies a localized field-line resonance.

Hughes, W. J.↗

A geostationary longitude acquisition planning algorithm

The paper is concerned with the phase of the geosynchronous mission termed station acquisition, which involves the maneuvering of a spacecraft to its geostationary longitude by means of the spacecraft propulsion system. An algorithm which assists in maneuver planning is described, and examples of its use are presented. The algorithm can be applied when sequences of more than three maneuvers are to be expected. While, in general, three maneuvers are sufficient to achieve the desired end conditions when orbital mechanics are the only consideration, operational considerations may add constraints resulting in an increased number of maneuvers required.

Petruzzo, C. J.↗

Communications payloads for geostationary platforms

Trends in communication satellites show increasing reuse of the frequency spectrum through multiple spot beams and orthogonal polarization, as well as consortia operation. Current reliance on orbital arc separation for frequency reuse may be inadequate for the projected traffic growth and the orbital slotting proposals before the ITU. This paper notes that cost advantages can accrue through common use of spacecraft subsystems and multiple users' platforms aboard a common geostationary platform. The rationale for such platforms is described and potential payloads are suggested.

Fordyce, S. W.↗

MSFC presentation charts on geostationary platform

A concept is presented of a geostationary platform. The concept takes the form of antennas and other payloads mounted on a strongback structure. The utilization and benefits of the platform are discussed.

Carey, W. T., Jr.↗

Geostationary platform structural system

A discussion is presented on the following engineering considerations for a geostationary platform: (1) structural configuration and design, (2) thermal characteristics, (3) flight load considerations and (4) assembly approaches.

Denton, S. J.↗

Communication architecture for large geostationary platforms

Large platforms have been proposed for supporting multipurpose communication payloads to exploit economy of scale, reduce congestion in the geostationary orbit, provide interconnectivity between diverse earth stations, and obtain significant frequency reuse with large multibeam antennas. This paper addresses a specific system design, starting with traffic projections in the next two decades and discussing tradeoffs and design approaches for major components including: antennas, transponders, and switches. Other issues explored are selection of frequency bands, modulation, multiple access, switching methods, and techniques for servicing areas with nonuniform traffic demands. Three-major services are considered: a high-volume trunking system, a direct-to-user system, and a broadcast system for video distribution and similar functions. Estimates of payload weight and d.c. power requirements are presented. Other subjects treated are: considerations of equipment layout for servicing by an orbit transfer vehicle, mechanical stability requirements for the large antennas, and reliability aspects of the large number of transponders employed.

Bond, F. E.↗

The use of geostationary platforms for future U.S. domestic satellite communications

Quantitative analyses of the relative costs and utilization of the available geostationary orbital arc and radio spectrum allocations between large spacecraft platforms and future individual satellites used for communications in the U.S. and the Atlantic Basin are presented. Attention is given to the high capacity and the switching capabilities of the platforms, and the frequency ranges (6/4, 14/12, and 30/20 GHz) at which they can operate. In addition, characteristics of conventional satellites, earth station design, and the connectivity of satellite systems are discussed.

Fordyce, S.↗

The geostationary radiation environment

A study of the geostationary radiation environment is presented. The distribution of charged particles is reviewed in terms of population domains, where trapped constituents (energetic electrons and protons) and transients (solar flare protons) have been considered. Synchronous geomagnetic geometry is discussed, and temporal and spatial variations of trapped particles are briefly reviewed. A short description of the current standard environment models is given. Probabilistic solar flare proton predictions are described, including the distinction between ordinary event and anomalously large event fluences and the probability of occurrence of anomalously large events. A special solar proton evaluation approach is suggested for extended manned missions in the synchronous altitude regime. Finally, calculational results are presented for orbital flux integrations and dose and shielding evaluations. The data, given in graphic and tabular form, are explained and discussed.

Stassinopoulos, E. G.↗

Radio frequency interference at the geostationary orbit

Growing demands on the frequency spectrum have increased the possibility of radio frequency interference (RFI). Various approaches to obtain in orbit RFI data are compared; this comparision indicates that the most practical way to obtain RFI data for a desired orbit (such as a geostationary orbit) is through the extrapolation of in orbit RFI measurements by a low orbit satellite. It is concluded that a coherent RFI program that uses both experimental data and analytical predictions provides accurate RFI data at minimal cost.

Sue, M. K.↗