Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDROBROMIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Materials Data on Bi2(Br3N)3 by Materials Project

(Bi)4(N2)3(Br)18 crystallizes in the monoclinic C2/m space group. The structure is zero-dimensional and consists of six ammonia molecules; four bismuth, elemental molecules; and eighteen hydrobromic acid molecules.

36 MATERIALS SCIENCE↗

Materials Data on MgTe(BrO)6 by Materials Project

(Mg(OBr)6)3MgO5Br4(Te)4BrOBr crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of one hydrobromic acid molecule, one hypobromous acid molecule, four tellurium molecules, three Mg(OBr)6 clusters, and one MgO5Br4 cluster. In each Mg(OBr)6 cluster, Mg2+ is bonded in an octahedral geometry to six O2- atoms. There are a spread of Mg–O bond distances ranging from 2.12–2.14 Å. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. In the third O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.75 Å. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. In the sixth O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.75 Å. There are five inequivalent Br1+ sites. In the first Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the second Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the third Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the fourth Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the fifth Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the MgO5Br4 cluster, Mg2+ is bonded in a distorted square pyramidal geometry to five O2- atoms. There are a spread of Mg–O bond distances ranging from 2.04–2.15 Å. There are five inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one Mg2+ atom. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.77 Å. In the third O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. In the fourth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.77 Å. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to one Mg2+ and one Br1+ atom. The O–Br bond length is 1.76 Å. There are four inequivalent Br1+ sites. In the first Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the second Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the third Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom. In the fourth Br1+ site, Br1+ is bonded in a single-bond geometry to one O2- atom.

36 MATERIALS SCIENCE↗

Materials Data on Pb3Se2(BrO3)2 by Materials Project

Pb3(SeO3)2Br2 crystallizes in the monoclinic C2/c space group. The structure is two-dimensional and consists of eight hydrobromic acid molecules and two Pb3(SeO3)2 sheets oriented in the (0, 0, 1) direction. In each Pb3(SeO3)2 sheet, there are two inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded in a distorted hexagonal planar geometry to six O2- atoms. There are a spread of Pb–O bond distances ranging from 2.63–2.79 Å. In the second Pb2+ site, Pb2+ is bonded in a distorted pentagonal planar geometry to five O2- atoms. There are a spread of Pb–O bond distances ranging from 2.53–2.74 Å. Se2- is bonded in a distorted trigonal non-coplanar geometry to three O2- atoms. There are a spread of Se–O bond distances ranging from 1.69–1.78 Å. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to three Pb2+ and one Se2- atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two Pb2+ and one Se2- atom. In the third O2- site, O2- is bonded in a 4-coordinate geometry to three Pb2+ and one Se2- atom.

36 MATERIALS SCIENCE↗

Materials Data on Nd7(BrO6)3 by Materials Project

Nd7O18(Br)3 crystallizes in the hexagonal P6_3/m space group. The structure is three-dimensional and consists of six hydrobromic acid molecules and one Nd7O18 framework. In the Nd7O18 framework, there are three inequivalent Nd3+ sites. In the first Nd3+ site, Nd3+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Nd–O bond distances ranging from 2.32–2.60 Å. In the second Nd3+ site, Nd3+ is bonded in a 10-coordinate geometry to ten O2- atoms. There are a spread of Nd–O bond distances ranging from 2.41–2.76 Å. In the third Nd3+ site, Nd3+ is bonded in a 9-coordinate geometry to nine O2- atoms. There are three shorter (2.45 Å) and six longer (2.61 Å) Nd–O bond lengths. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a 4-coordinate geometry to three equivalent Nd3+ and one O2- atom. The O–O bond length is 1.43 Å. In the second O2- site, O2- is bonded in a 4-coordinate geometry to three Nd3+ and one O2- atom. The O–O bond length is 1.49 Å. In the third O2- site, O2- is bonded in a 3-coordinate geometry to three equivalent Nd3+ atoms. In the fourth O2- site, O2- is bonded in a 3-coordinate geometry to three Nd3+ atoms. In the fifth O2- site, O2- is bonded in a 4-coordinate geometry to three Nd3+ and one O2- atom. In the sixth O2- site, O2- is bonded in a 2-coordinate geometry to four Nd3+ and one O2- atom.

36 MATERIALS SCIENCE↗

Materials Data on Bi6Se3(BrO7)2 by Materials Project

Bi6(SeO3)3O5Br2 crystallizes in the triclinic P-1 space group. The structure is three-dimensional and consists of four hydrobromic acid molecules and one Bi6Se3O14 framework. In the Bi6Se3O14 framework, there are six inequivalent Bi3+ sites. In the first Bi3+ site, Bi3+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Bi–O bond distances ranging from 2.22–3.09 Å. In the second Bi3+ site, Bi3+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Bi–O bond distances ranging from 2.22–2.84 Å. In the third Bi3+ site, Bi3+ is bonded in a 3-coordinate geometry to eight O2- atoms. There are a spread of Bi–O bond distances ranging from 2.21–3.12 Å. In the fourth Bi3+ site, Bi3+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Bi–O bond distances ranging from 2.24–3.08 Å. In the fifth Bi3+ site, Bi3+ is bonded in a distorted pentagonal planar geometry to five O2- atoms. There are a spread of Bi–O bond distances ranging from 2.24–2.47 Å. In the sixth Bi3+ site, Bi3+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Bi–O bond distances ranging from 2.17–2.95 Å. There are three inequivalent Se sites. In the first Se site, Se is bonded in a distorted trigonal non-coplanar geometry to three O2- atoms. There are a spread of Se–O bond distances ranging from 1.72–1.77 Å. In the second Se site, Se is bonded in a distorted trigonal non-coplanar geometry to three O2- atoms. There is one shorter (1.73 Å) and two longer (1.74 Å) Se–O bond length. In the third Se site, Se is bonded in a distorted trigonal non-coplanar geometry to three O2- atoms. There is two shorter (1.73 Å) and one longer (1.76 Å) Se–O bond length. There are fourteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 4-coordinate geometry to three Bi3+ and one Se atom. In the second O2- site, O2- is bonded in a distorted tetrahedral geometry to four Bi3+ atoms. In the third O2- site, O2- is bonded in a 3-coordinate geometry to four Bi3+ atoms. In the fourth O2- site, O2- is bonded in a trigonal non-coplanar geometry to three Bi3+ atoms. In the fifth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to four Bi3+ atoms. In the sixth O2- site, O2- is bonded in a 1-coordinate geometry to three Bi3+ and one Se atom. In the seventh O2- site, O2- is bonded in a trigonal planar geometry to three Bi3+ atoms. In the eighth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to three Bi3+ and one Se atom. In the ninth O2- site, O2- is bonded in a 1-coordinate geometry to three Bi3+ and one Se atom. In the tenth O2- site, O2- is bonded in a 1-coordinate geometry to three Bi3+ and one Se atom. In the eleventh O2- site, O2- is bonded in a 1-coordinate geometry to two Bi3+ and one Se atom. In the twelfth O2- site, O2- is bonded in a 1-coordinate geometry to three Bi3+ and one Se atom. In the thirteenth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Bi3+ and one Se atom. In the fourteenth O2- site, O2- is bonded in a 2-coordinate geometry to two Bi3+ and one Se atom.

36 MATERIALS SCIENCE↗

Materials Data on CoH15Br2(N3O)2 by Materials Project

CoH15(N3O)2(Br)2 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of four hydrobromic acid molecules and two CoH15(N3O)2 clusters. In each CoH15(N3O)2 cluster, Co3+ is bonded in an octahedral geometry to six N3- atoms. There are a spread of Co–N bond distances ranging from 1.97–2.11 Å. There are six inequivalent N3- sites. In the first N3- site, N3- is bonded in a trigonal planar geometry to one Co3+ and two O2- atoms. Both N–O bond lengths are 1.24 Å. In the second N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and three H1+ atoms. All N–H bond lengths are 1.03 Å. In the third N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and three H1+ atoms. All N–H bond lengths are 1.03 Å. In the fourth N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and three H1+ atoms. All N–H bond lengths are 1.03 Å. In the fifth N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and three H1+ atoms. All N–H bond lengths are 1.03 Å. In the sixth N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one Co3+ and three H1+ atoms. There is one shorter (1.02 Å) and two longer (1.03 Å) N–H bond length. There are fifteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fourteenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fifteenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one N3- atom. In the second O2- site, O2- is bonded in a single-bond geometry to one N3- atom.

36 MATERIALS SCIENCE↗

Materials Data on H5PbC2SBrN6 by Materials Project

PbC2N6H5SBr crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of four hydrobromic acid molecules and one PbC2N6H5S sheet oriented in the (0, 0, 1) direction. In the PbC2N6H5S sheet, Pb2+ is bonded in a 4-coordinate geometry to three N3- and one S2- atom. There are a spread of Pb–N bond distances ranging from 2.51–2.78 Å. The Pb–S bond length is 2.94 Å. There are two inequivalent C4+ sites. In the first C4+ site, C4+ is bonded in a trigonal planar geometry to three N3- atoms. There are a spread of C–N bond distances ranging from 1.33–1.37 Å. In the second C4+ site, C4+ is bonded in a distorted trigonal planar geometry to two N3- and one S2- atom. There is one shorter (1.33 Å) and one longer (1.39 Å) C–N bond length. The C–S bond length is 1.71 Å. There are six inequivalent N3- sites. In the first N3- site, N3- is bonded in a distorted single-bond geometry to one Pb2+, one C4+, and one N3- atom. The N–N bond length is 1.38 Å. In the second N3- site, N3- is bonded in a distorted single-bond geometry to one Pb2+, one C4+, and one N3- atom. In the third N3- site, N3- is bonded in a distorted water-like geometry to one N3- and two H1+ atoms. The N–N bond length is 1.41 Å. There is one shorter (1.02 Å) and one longer (1.03 Å) N–H bond length. In the fourth N3- site, N3- is bonded in a 2-coordinate geometry to one C4+, one N3-, and one H1+ atom. The N–N bond length is 1.42 Å. The N–H bond length is 1.03 Å. In the fifth N3- site, N3- is bonded in a distorted trigonal planar geometry to two C4+ and one N3- atom. In the sixth N3- site, N3- is bonded in a distorted water-like geometry to one Pb2+, one N3-, and two H1+ atoms. There is one shorter (1.02 Å) and one longer (1.03 Å) N–H bond length. There are five inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. S2- is bonded in a distorted single-bond geometry to one Pb2+ and one C4+ atom.

36 MATERIALS SCIENCE↗

Detection of atomic oxygen and further line assignments in the far-infrared stratospheric spectrum

Recent progress in high-resolution measurement of sub-millimeter and far-infrared emission in the stratosphere is reviewed. Attention is given to the results of recent balloon measurements of the minor stratospheric constituents in the spectral range 40-190 per cm. Emission spectra are presented for HCl; HF; and OH. Emission spectra were also obtained for atomic oxygen; hydrobromic acid; and hydroperoxyl radical. The possibility of detecting HO2 and H2O2 in the far-infrared is also briefly discussed.

Carli, B.↗

Theoretical and Experimental Flow Cell Studies of a Hydrogen-Bromine Fuel Cell, Part 1

There is increasing interest in hydrogen-bromine fuel cells as both primary and regenerative energy storage systems. One promising design for a hydrogen-bromine fuel cell is a negative half cell having only a gas phase, which is separated by a cationic exchange membrane from a positive half cell having an aqueous electrolyte. The hydrogen gas and the aqueous bromide solution are stored external to the cell. In order to calculate the energy storage capacity and to predict and assess the performance of a single cell, the open circuit potential (OCV) must be estimated for different states of change, under various conditions. Theoretical expressions were derived to estimate the OCV of a hydrogen-bromine fuel cell. In these expressions temperature, hydrogen pressure, and bromine and hydrobromic acid concentrations were taken into consideration. Also included are the effects of the Nafion membrance separator and the various bromide complex species. Activity coefficients were taken into account in one of the expressions. The sensitivity of these parameters on the calculated OCV was studied.

Savinell, R. F.↗

Polyimidazoles via aromatic nucleophilic displacement

Polyimidazoles (PI) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl) imidazole monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The reactions are carried out in polar aprotic solvents such as N,N-dimethyl acetamide, sulfolane, N-methylpyrrolidinone, dimethylsulfoxide, or diphenylsulfone using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. The di(hydroxyphenyl) imidazole monomers are prepared by reacting an aromatic aldehyde with a dimethoxybenzil or by reacting an aromatic dialdehyde with a methoxybenzil in the presence of ammonium acetate. The di(methoxyphenyl) imidazole is subsequently treated with aqueous hydrobromic acid to give the di(hydroxphenyl) imidazole monomer. This synthetic route has provided high molecular weight PI of new chemical structure, is economically and synthetically more favorable than other routes, and allows for facile chemical structure variation due to the availability of a large variety of activated aromatic dihalides and dinitro compounds.

Connell, John W.↗

Polyimidazoles via aromatic nucleophilic displacement

Polyimidazoles (Pl) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl)imidazole monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The reactions are carried out in polar aprotic solvents such as N,N-dimethylacetamide, sulfolane, N-methylpyrroldinone, dimethylsulfoxide, or diphenylsulfone using alkali metal bases such as potassium carbonate at elevated temperature under nitrogen. The di(hydroxyphenyl)imidazole monomers are prepared by reacting an aromatic aldehyde with a dimethoxybenzil or by reacting an aromatic dialdehyde with a methoxybenzil in the presence of ammonium acetate. The di(methoxyphenyl)imidazole is subsequently treated with aqueous hydrobromic acid to give the di(hydroxyphenyl)imidazole monomer. This synthetic route has provided high molecular weight Pl of new chemical structure, is economically and synthetically more favorable than other routes, and allows for facile chemical structure variation due to the availability of a large variety of activated aromatic dihalides and dinitro compounds.

Connell, John W.↗

Synthesis and structure of alkyl 2-arylsulfanyl-3-nitroacrylates

Alkyl 2-arylsulfanyl-3-nitroacrylates were synthesized by the conjugate Michael addition of thiophenols to alkyl 3-bromo-3-nitroacrylates followed by elimination of HBr on treatment with Et{sub 3}N. When treated with 4-chlorothiophenol in the presence of Et{sub 3}N, alkyl 2-[(4-chlorophenyl) sulfanyl]-3-nitroacrylates can be transformed into alkyl 2,3-bis[(4-chlorophenyl)sulfanyl]- acrylates. The structures of the synthesized compounds were characterized by IR, UV, {sup 1}H and {sup 13}C{"1H} NMR spectroscopy using {sup 1}H–{sup 13}C HMQC, {sup 1}H–{sup 13}C, and {sup 1}H–{sup 15}N HMBC techniques. Methyl 2-[(4-methylphenyl)sulfanyl]-3-nitroacrylate exists as the Z-isomer, as confirmed by X-ray diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Analysis on the Pyrolysis of Tetrabromobisphenol A and Electric Arc Furnace Dust Mixtures

The pyrolysis of Tetrabromobisphenol A (TBBPA) mixed with electric arc furnace dust (EAFD) was studied using thermogravimetric analysis (TGA) and theoretically analyzed using thermodynamic equilibrium calculations. Mixtures of both materials with varying TBBPA loads (1:1 and 1:3) were prepared and pyrolyzed in a nitrogen atmosphere under dynamic heating conditions at heating rates of 5 and 10 °C/min. The mixtures degraded through several steps, including decomposition of TBBPA yielding mainly HBr, bromination of metal oxides, followed by their evaporation in the sequence of CuBr{sub 3}, ZnBr{sub 2}, PbBr{sub 2}, FeBr{sub 2}, MnBr{sub 2}, KBr, NaBr, CaBr{sub 2}, and MgBr{sub 2}, and finally reduction of the remaining metal oxides by the char formed from decomposition of TBBPA. Thermodynamic calculations suggest the possibility of selective bromination of zinc and lead followed by their evaporation, leaving iron in its oxide form, while the char formed may serve as a reduction agent for iron oxides into metallic iron. However, at higher TBBPA volumes, iron bromide forms, which can also be evaporated at a temperature higher than those of ZnBr{sub 2} and PbBr{sub 2}. Results from this work provide practical insight into selective recovery of valuable metals from EAFD while at the same time recycling the hazardous bromine content in TBBPA.

36 MATERIALS SCIENCE↗

CaBr{sub 2} hydrolysis for HBr production using a direct sparging contactor.

The calcium-bromine cycle being investigated is a novel continuous hybrid cycle for hydrogen production employing both heat and electricity. Calcium bromide (CaBr{sub 2}) hydrolysis generates hydrogen bromide (HBr) which is electrolyzed to produce hydrogen. The CaBr{sub 2} hydrolysis at 1050 K (777 C) is endothermic with the heat of reaction {delta}G{sub T} = 181.5 KJ/mol (43.38 kcal/mol) and the Gibbs free energy change is positive at 99.6 kJ/mol (23.81 kcal/mol). What makes this hydrolysis reaction attractive is both its rate and that well over half the thermodynamic requirements for water-splitting heat of reaction of {delta}G{sub T} = 285.8 KJ/mol (68.32 kcal/mol) are supplied at this stage using heat rather than electricity. Molten-phase calcium bromide reactors may overcome the technical barriers associated with earlier hydrolysis approaches using supported solid-phase calcium bromide studied in the Japanese UT-3 cycle. Before constructing the experiment two design concepts were evaluated using COMSOL{trademark} multi-physics models; (1) the first involved sparging steam into a calcium-bromide melt, while (2) the second considered a 'spray-dryer' contactor spraying molten calcium bromide counter-currently to upward-flowing steam. A recent paper describes this work. These studies indicated that sparging steam into a calcium-bromide melt is more feasible than spraying molten calcium bromide droplets into steam. Hence, an experimental sparging hydrolysis reactor using a mullite tube (ID 70 mm) was constructed capable of holding 0.3-0.5 kg (1.5-2.5 x 10{sup -3} kg mol) CaBr{sub 2} forming a melt with a maximum 0.08 m (8 cm) depth. Sparging steam at a steam rate of 0.02 mol/mol of CaBr{sub 2} per minute (1.2-2.3 x 10{sup -5} kg/s), into this molten bath promptly yielded HBr in a stable operation that converted up to 25% of the calcium bromide. The kinetic constant derived from the experimental data was 2.17 x 10{sup -12} kmol s{sup -1} m{sup -2} MPa{sup -1} for the hydrolysis reaction. The conversion rate is highly dependent on melt depth and the design for steam sparging. This experimental data provides a basis for designing a larger-scale sparging hydrolysis reactor for the calcium bromide thermochemical cycle where the endothermic heat of reaction can be effectively supplied by heat transfer coils embedded in the melt.

08 HYDROGEN↗

Three-dimensional velocity map imaging: Setup and resolution improvement compared to three-dimensional ion imaging

For many years the three-dimensional (3D) ion imaging technique has not benefited from the introduction of ion optics into the field of imaging in molecular dynamics. Thus, a lower resolution of kinetic energy as in comparable techniques making use of inhomogeneous electric fields was inevitable. This was basically due to the fact that a homogeneous electric field was needed in order to obtain the velocity component in the direction of the time of flight spectrometer axis. In our approach we superimpose an Einzel lens field with the homogeneous field. We use a simulation based technique to account for the distortion of the ion cloud caused by the inhomogeneous field. In order to demonstrate the gain in kinetic energy resolution compared to conventional 3D Ion Imaging, we use the spatial distribution of H{sup +} ions emerging from the photodissociation of HCl following the two photon excitation to the V {sup 1}{Sigma}{sup +} state. So far a figure of merit of approximately four has been achieved, which means in absolute numbers {Delta}v/v=0.022 compared to 0.086 at v{approx_equal}17 000 m/s. However, this is not a theoretical limit of the technique, but due to our rather short TOF spectrometer (15 cm). The photodissociation of HBr near 243 nm has been used to recognize and eliminate systematic deviations between the simulation and the experimentally observed distribution. The technique has also proven to be essential for the precise measurement of translationally cold distributions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

HXeOBr in a xenon matrix

We report on a new noble-gas molecule HXeOBr prepared in a low-temperature xenon matrix from the HBr and N{sub 2}O precursors by UV photolysis and thermal annealing. This molecule is assigned with the help of deuteration experiments and ab initio calculations including anharmonic methods. The H-Xe stretching frequency of HXeOBr is observed at 1634 cm{sup -1}, which is larger by 56 cm{sup -1} than the frequency of HXeOH identified previously. The experiments show a higher thermal stability of HXeOBr molecules in a xenon matrix compared to HXeOH.

36 MATERIALS SCIENCE↗

Velocity map imaging of HBr photodissociation in large rare gas clusters

We have implemented the velocity map imaging technique to study clustering in the pulsed supersonic expansions of hydrogen bromide in helium, argon, and xenon. The expansions are characterized by direct imaging of the beam velocity distributions. We have investigated the cluster generation by means of UV photodissociation and photoionization of HBr molecules. Two distinct features appear in the hydrogen atom photofragment images in the clustering regime: (i) photofragments with near zero kinetic energies and (ii) ''hot'' photofragments originating from vibrationally excited HBr molecules. The origin of both features is attributed to the fragment caging by the cluster. We discuss the nature of the formed clusters based on the change of the photofragment images with the expansion parameters and on the photoionization mass spectra and conclude that single HBr molecule encompassed with rare gas ''snowball'' is consistent with the experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of pulsed high-density HBr and Cl{sub 2} plasmas: Impact of the pulsing parameters on the radical densities

The dynamic of charged particles in pulsed plasma is relatively well known since the 1990s. In contrast, works reporting on the impact of the plasma modulation frequency and duty cycle on the radicals' densities are scarce. In this work, we analyze the impact of these modulation parameters on the radicals' composition in Cl{sub 2} and HBr plasmas. The radicals' densities are measured by broad-band UV and vacuum-ultraviolet (VUV) absorption spectroscopy and modulated-beam mass spectrometry. We show that pulsing the rf power allows controlling the plasma chemistry and gives access to the plasma conditions that cannot be reached in continuous wave plasmas. In particular, we show that above 500 Hz, the pulsing frequency has no influence on the plasma chemistry, whereas in contrast the duty cycle is an excellent knob to control the fragmentation of the parent gas, thus the chemical reactivity of the discharge. At low duty cycle, a reduced gas fragmentation combined with a large ion flux leads to new etching conditions, compared to cw plasmas and the expected consequences on pulsed-etching processes are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗