Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDROLOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Effects of surface runoff and infiltration partition methods on hydrological modeling: A comparison of four schemes in two watersheds in the Northeastern US

The ratio according to which the precipitation/snowmelt is divided into surface and subsurface water is of primary importance to watershed scale hydrological modeling. The present study compared four different surface runoff and infiltration partition methods in the Richards-equation-based SWAT model (RSWAT), i.e., daily curve number method (DC-RSWAT), hourly curve number method (HC-RSWAT), Green-Ampt method (GA-RSWAT), and effective infiltration capacity method (EIC-RSWAT). These four versions of RSWAT and a daily-curve-number-based SWAT (DC-SWAT) were used to simulate daily flow rate (from 2001 to 2015) at the outlets of the Tuckahoe Creek Watershed (TCW) and Greensboro Watershed (GW) of the Chesapeake Bay in Maryland. Parameter sensitivity analysis, calibration, and prediction uncertainty analysis were conducted. The results indicate that surface runoff and infiltration partition methods have pronounced impacts on model performance. Comparative analysis showed that DC-RSWAT outperformed other versions of RSWAT for both calibration (from 2001 to2007) and validation (from 2008 to 2015) periods in the two test watersheds. In general, DC-RSWAT achieved more accurate deterministic flow simulation and reliable uncertainty estimation than other versions. As such, daily-curve-number method is recommended for surface runoff and infiltration partition in RSWAT for simulating stream flow.

hydrology, modeling, streamflow↗

Integrating fine root diameter and watershed mapping to characterize rhizosphere hydrology

Root morphology and soil hydraulic characteristics were integrated using watershed distance mapping to show water distribution and uptake across the plant-soil interface. Poplar (Populus deltoides, P. trichocarpa), maize (Zea mays), juniper (Juniperus virginiana), grape (Vitis rotundifolia) and maple (Acer saccharum) seedlings were grown in sand, after which root diameter and soil water dynamics were assessed via sequential neutron radiography. Three local soil regions (root-soil interface or edge, rhizosphere, bulk soil) were classified based on both radial distance from the root surface and diameter of the nearest root, from which changes in water content and distribution were characterized using digital image processing. Water content dynamics across the rhizosphere showed two different species-independent processes: a consistently elevated water content at the root-soil edge interface which increased with root diameter, and hysteresis as the rhizosphere transitioned to bulk soil (~0.5 cm from the root), independent of root diameter. Water uptake per unit root surface area declined exponentially with root diameter, independent of species. Results highlight the species-independent hydrologic characteristics of the rhizosphere and the potential for evaluating them in a local spatially connected soil context. Avenues for improved integration of soil and root characteristics are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Using Ensemble Data Assimilation to Estimate Transient Hydrologic Exchange Flow Under Highly Dynamic Flow Conditions

Abstract Quantifying dynamic hydrologic exchange flows (HEFs) within river corridors that experience high‐frequency flow variations caused by dam regulations is important for understanding the biogeochemical processes at the river water and groundwater interfaces. Heat has been widely used as a tracer to infer steady‐state flow velocities through analytical solutions of heat transport defined by the diurnal temperature signals. Under sub‐daily dynamic flow conditions, however, such analytical solutions are not applicable due to the violation of their fundamental assumptions. In this study, we developed a data assimilation‐based approach to estimate the sub‐daily flux under highly dynamic flow conditions using multi‐depth temperature observations at a 5‐min resolution. If the hydraulic gradient is measured, Darcy's law was used to calculate the flux with permeability estimated from temperature responses below the riverbed. Otherwise, flux was estimated directly by assimilating multi‐depth temperature data at 1‐ or 2‐hr time intervals assuming one‐dimensional flow and heat transport governing equation. By comparing estimated fluxes with model‐generated synthetic truth, we demonstrated that both schemes have robust performance in estimating fluxes under highly dynamic flow conditions. This data assimilation‐based flux estimation method was able to capture the vertical sub‐daily fluxes using multi‐depth high‐resolution temperature data alone, even in the presence of multi‐dimensional flow. This approach has been successfully applied to real field temperature data collected at the Hanford site, which experiences highly dynamic HEFs. Our study shows the promise of adopting distributed 1‐D temperature monitoring to capture spatial and temporal exchange dynamics in river corridors at a watershed scale or beyond.

54 ENVIRONMENTAL SCIENCES↗

Projected changes in cross-equatorial northerly surges and their hydrological impacts in the near future

Recent decades have witnessed unprecedented extreme precipitation and catastrophic flooding in some of the most populated regions in Southeast Asia during boreal winter. These extreme events are often influenced by the cross-equatorial northerly surge (CENS), characterized by a strengthening of northerly moist monsoon winds south of the equator in the western Maritime Continent. However, the potential future changes in CENS and its hydrological impacts remain underexplored. Here, using an ensemble of high-resolution climate model simulations (CMIP6 HighResMIP), we show that the regional impacts of CENS on the intensity and frequency of extreme precipitation events are projected to significantly increase in the near future (2030–2050), particularly over the adjacent coastal regions of southern Indonesia and northwestern Australia. More specifically, the risk of CENS-related extreme precipitation is projected to increase by up to 39 ± 1.2% relative to the seasonal probability, despite no apparent changes in the CENS characteristics in the near future. Such stronger impact is attributed to the enhanced moistening efficiency and moist static instability due to a more humid and warmer environment, which leads to more intense CENS convection. Our results suggest the need for effective monitoring and disaster managements to respond to the increasing severity of such events in the near future.

Climate sciences↗

Model Development for Thermal-Hydrology Simulations of a Full-Scale Heater Experiment in Opalinus Clay

Disposal of commercial spent nuclear fuel in a geologic repository is studied. In situ heater experiments in underground research laboratories provide a realistic representation of subsurface behavior under disposal conditions. Here, this study describes process model development and modeling analysis for a full-scale heater experiment in opalinus clay host rock. The results of thermal-hydrology simulation, solving coupled nonisothermal multiphase flow, and comparison with experimental data are presented. The modeling results closely match the experimental data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessing the complex influences of water management on hydrological drought characteristics in Texas

The state of Texas in the United States is highly susceptible to drought. Its major rivers are subject to extensive water management (WM) activities in order to sustain multisectoral water demands, particularly during drought conditions. However, the impact of WM on the propagation dynamics and characteristics of hydrological drought (HD) in Texas remains unclear. To fill this gap, this study quantifies the influence of WM across 32 streamflow gauges along the mainstems of seven major rivers in Texas by comparing a variety of drought metrics under natural and managed conditions. Notably, we leveraged an extensive, naturalized streamflow dataset constructed by the Texas Commission on Environmental Quality, paired with gauge observations of managed conditions. Results indicate that at the multi-decadal scale, WM significantly reduced HD frequency across all seven rivers and at 81% of the gauges analyzed. Additionally, it increased the response timescale of HD across Texas’ major rivers by a median of 2.5 months. Conversely, the average-event duration and severity increased in most locations. Temporal analysis reveals that the WM impact on HD varied seasonally, with attenuation effects during mid-summer and early fall and intensification effects during late winter and spring. Additionally, WM was found to greatly increase the spatial variability of HD characteristics across the region. These findings emphasize the complexity of WM effects on HD and the necessity for nuanced strategies in managing HD under WM influences.

54 ENVIRONMENTAL SCIENCES↗

Exploring Flood Predictability in Taiwan through Coupled Atmospheric–Hydrological and High-Performance Hydrodynamic Models

Effective flood simulation capabilities can tremendously support early warning and disaster prevention. To examine the applicability of a fully physics-based and high-performance flood simulation and forecasting modeling framework for a flood-prone region in Taiwan, we conduct a numerical experiment that couples the Weather Research and Forecasting (WRF) Model, WRF-Hydrological modeling system (WRF-Hydro), and the Two-Dimensional Runoff Inundation Toolkit for Operational Needs (TRITON) to perform integrated rainfall, streamflow, and flood simulations. Furthermore, we first use the coupled WRF and WRF-Hydro (WWH) to predict rainfall and streamflow and then drive TRITON with the predicted streamflow hydrographs to simulate flood depth and inundation area. With the refined spatial resolution and parameterization, this framework can better predict rainfall with reasonable spatial patterns. Although WWH could overestimate the amount of rainfall in some areas, the uncertain rainfall–streamflow predictions produce reasonable flood maps able to pinpoint regions at risk of flooding. In terms of model efficiency, the graphics processing unit–based computation can yield a speed-up factor as high as ∼13 compared to the central processing unit–based computation, promoting the efficacy of the coupled modeling framework in practical real-time flood forecasting.

Coupled models↗

Model Scripts for "Old-Aged Groundwater Contributes to Mountain Hillslope Hydrologic Dynamics"

The partitioning of water inputs between deep and shallow groundwater flow paths is a fundamental processes, yet is challenging to observe. Numerical models provide a valuable tool to further develop insights on these groundwater mixing processes. This repository contains scripts to run the ParFlow-CLM and EcoSLIM integrated hydrologic models along the Pumphouse Hillslope in the East River Watershed and associated python scripts to process model outputs. Files includes input decks for the associated models, python scripts, and text and css files to support the model runs and processing. The 2-D hillslope model simulates from 2000 to 2021 using transient forcing conditions from the publicly available NLDAS-2 dataset. We develop an ensemble of models with variable hydrogeologic and soil parameters. Model outputs from the ensemble of runs are compared to to water level observations at the PLM1 and PLM6 wells published at (https://data.ess-dive.lbl.gov/view/doi:10.15485/1866836) and groundwater mean ages published at (https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1960042. The model results are used to evaluate hillslope water mass-balance transience and mixing dynamics between groundwater flow paths with young (<10 year) and old (>10 year) ages.

54 ENVIRONMENTAL SCIENCES↗

Data and scripts associated with “When do Riverine Systems 'Feel the Burn'? Simulating How Burn Extent and Severity Modulate Hydrologic Controls on Biogeochemical Export” (v2)

This data package is associated with the publication “When do Riverine Systems 'Feel the Burn'? Simulating How Burn Extent and Severity Modulate Hydrologic Controls on Biogeochemical Export” published in Water Resources Research (Wampler et al. 2025; preprint: https://doi.org/10.22541/essoar.174438106.63564767/v1). This study used the Soil and Water Assessment Tool (SWAT), a processed based model to explore the impacts of area burned and burn severity on streamflow, nitrate, and dissolved organic carbon (DOC) in two test basins: a semi-arid, mixed land use basin and a humid, primarily forested basin. We developed 1800 wildfire scenarios that we ran in each basin: 20 different burn extents (5 to 100% by 5%), 3 different burn severities (low, moderate, and high), and 30 different post-fire precipitation scenarios. We also ran an additional 30 scenarios associated with no wildfire for the 30 post-fire precipitation scenarios. For each scenario we were interested in the change in runoff ratio (streamflow) and average concentration and annual loads (nitrate and DOC) across the wildfire scenarios. This data package contains the data and scripts required to build SWAT models for the two test basins, create and run the wildfire scenarios, and generate the data summaries and figures used in the associated manuscript. This data package was originally published in March 2025. It was updated in January 2026 (v2; new and modified files) to include the final files after the manuscript went through reviews. See the change history section below for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About.

54 ENVIRONMENTAL SCIENCES↗

Constraining Physical Understanding of Aerosol Loading, Biogeochemistry, and Snowmelt Hydrology from Hillslope to Watershed Scale in the East River Scientific Focus Area

The mountain snowpack is a critical component of regional hydrology, ecology, biogeochemistry, and climate in the Western US. This project leveraged the East River Scientific Focus Area (SFA), as an outdoor laboratory to address a significant gap in our understanding of the mountain snowpack; namely, how atmospheric constituent deposition on snowpack influences snow energy balance and nutrient/chemical cycling, and how snowmelt timing and intensity exerts controls on emergent biogeochemical and ecohydrologic behavior. This aligned with East River SFA goals to integrate landscape scale measurements and physical based modeling tools to improve understanding of controls on runoff production, ecohydrology, biogeochemical cycling, and land surface energy partitioning in high mountain watersheds. The project included observations of snowpack at multiple scales, measurements of snow and deposited aerosols properties, in situ time series of surface energy balance, and spatially distributed, process-based snowmelt modeling.

54 ENVIRONMENTAL SCIENCES↗

A multi-scale temperature-based strategy to map hydrologic exchange flows in highly dynamic systems

Mapping and quantifying hydrologic exchange flows (HEFs) is critical to environmental monitoring and remediation at contaminated sites; however, these objectives are challenging in highly dynamic systems, e.g., along dam-regulated rivers, where HEFs vary rapidly. Direct seepage measurements are labor-intensive and difficult to automate, whereas indirect (e.g., thermal) and remote sensing methods have potential to allow continuous monitoring with limited field effort. We present a preliminary assessment of a multi-scale temperature-based strategy for monitoring HEFs along the Hanford Reach of the Columbia River, in eastern WA, United States. Five thermal methods were assessed. First, a vertical temperature profile (VTP) was installed into the streambed. The VTP data were analyzed using a data assimilation algorithm designed for automated real-time estimation in dynamic systems. Second, a thermal infrared (TIR) camera was used in roving surveys to identify seeps. Third, a TIR camera was stationed at the VTP site to collect images at 1-h intervals. Together, the two TIR datasets provided a basis to assess the potential for drone-based TIR. Fourth, temperature was measured at the sediment/water interface to assess fiber-optic distributed temperature sensing. Fifth, imagery from the ECOSTRESS satellite mission was acquired to assess the potential of spaceborne thermal monitoring. Based on our preliminary assessment, VTP, TIR, and bed temperature measurements provide complementary spatial coverage, temporal sampling, and resolution; these methods have potential for long-term, automated monitoring of HEFs. The publicly available spaceborne imagery, however, proved inadequate because of insufficient spatial resolution and data gaps resulting from cloud cover and revisit frequency.

54 ENVIRONMENTAL SCIENCES↗

Enhancing the representation of water management in global hydrological models

Abstract. This study enhances an existing global hydrological model (GHM), Xanthos, by adding a new water management module that distinguishes between the operational characteristics of irrigation, hydropower, and flood control reservoirs. We remapped reservoirs in the Global Reservoir and Dam (GRanD) database to the 0.5∘ spatial resolution in Xanthos so that a single lumped reservoir exists per grid cell, which yielded 3790 large reservoirs. We implemented unique operation rules for each reservoir type, based on their primary purposes. In particular, hydropower reservoirs have been treated as flood control reservoirs in previous GHM studies, while here, we determined the operation rules for hydropower reservoirs via optimization that maximizes long-term hydropower production. We conducted global simulations using the enhanced Xanthos and validated monthly streamflow for 91 large river basins, where high-quality observed streamflow data were available. A total of 1878 (296 hydropower, 486 irrigation, and 1096 flood control and others) out of the 3790 reservoirs are located in the 91 basins and are part of our reported results. The Kling–Gupta efficiency (KGE) value (after adding the new water management) is ≥ 0.5 and ≥ 0.0 in 39 and 81 basins, respectively. After adding the new water management module, model performance improved for 75 out of 91 basins and worsened for only 7. To measure the relative difference between explicitly representing hydropower reservoirs and representing hydropower reservoirs as flood control reservoirs (as is commonly done in other GHMs), we use the normalized root mean square error (NRMSE) and the coefficient of determination (R2). Out of the 296 hydropower reservoirs, the NRMSE is > 0.25 (i.e., considering 0.25 to represent a moderate difference) for over 44 % of the 296 reservoirs when comparing both the simulated reservoir releases and storage time series between the two simulations. We suggest that correctly representing hydropower reservoirs in GHMs could have important implications for our understanding and management of freshwater resource challenges at regional-to-global scales. This enhanced global water management modeling framework will allow the analysis of future global reservoir development and management from a coupled human–earth system perspective.

13 HYDRO ENERGY↗

Global Inter-Basin Hydrological Transfer Database

This document describes a global database of inter-basin hydrological transfers that has been used by the University of New Hampshire Water Balance Model for several years. The database has focussed primarily on large scale water transfers that are built, under-construction, or proposed.

Hydrological Infrastructure↗

Data for Grogan et al. "Bringing Hydrologic Realism to Water Markets"

This data set provides model output and post-processing files required to reproduce the results, tables, and figures in the paper "Bringing Hydrologic Realism to Water Markets" by Grogan et al. (in review). Other input data used in this study includes: Lisk, M., Grogan, D., Zuidema, S., Caccese, R., Peklak, D., Zheng, J., Fisher-Vanden, K., Lammers, R., Olmstead, S., & Fowler, L. (2023). Harmonized Database of Western U.S. Water Rights (HarDWR) (Version v1) [Data set]. MSD-LIVE Data Repository. https://doi.org/10.57931/2205619 Two models were used in this study: (1) The University of New Hampshire Water Balance Model WBM, and (2) a Water Market Model. Market model code and model output post-processing code that make use of these data can be found here Model output files are: 1. WBM output files: scenario[x]_wbm_output.zip Where [x] is one of 1, 2, 2a, 3, and 3a Each zipped directory contains 7 gridded NetCDF files, each reporting the 10-year annual average value of a given variable, in units of average mm/day: File Name: wbm_indUseGross_yc.nc; Description: Water withdrawals by industry (part of the urban sector) File Name: wbm_domUseGross_yc.nc; Description: Water withdrawals by the domestic sector (part of the urban sector) File Name: wbm_irrigationGross_yc.nc; Description: Water withdrawals for agriculture File Name: wbm_irrigationExtra_yc.nc; Description: Water withdrawals from unsustainable groundwater for agriculture File Name: wbm_indUseEvap_yc.nc; Description: Consumptive water use by industry File Name: wbm_domUseEvap_yc.nc; Description: Consumptive water use by the domestic sector File Name: wbm_irrigationNet_yc.nc; Description: Consumptive water use by agriculture The file full_cell_area.nc gives the area of each grid cell in km2, which is used for converting water depth to water volume. 2. Water market model output & post processing output Folder: marketTrdSummaries/ Description: Files in this folder are used as input to code 1_WelfareCalculation_actual_trades.R. They summarize historical water right trade transactions in each state. File Name: welfare_gain_by_state_sector.csv; Description: Welfare gains by state and sector, as shown in Figure 3F. Used in code Figure3.R and produced (as a .xlsx file) by code 2_DemandCurves_simulated_trades.R File Name: welfare_data_actual.rdata; Description: welfare gains by WMA from actual historical trades, as shown in Figure 3A. This data is the output of code 1_WelfareCalculation_actual_trades.R File Name: welfare_summary_simulated.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 1. Produced by code 2_DemandCurves_simulated_trades.R, and used in code 4_WelfareCalculation.R. File Name: welfare_summary_cutoffs.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 2. Produced by code 3_DemandCurves_simulated_trades_cutoffs.R, and used in code 4_WelfareCalculation.R. File Name: welfare_summary_cutoffs_SGMS.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 2a. Produced by code 3_DemandCurves_simulated_trades_cutoffs.R, and used in code 4_WelfareCalculation.R. File Name: welfare_data_actual.rdata; Description: Spatial data, actual historical welfare gains by WMA as shown in Figure 3A. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated.rdata; Description: Spatial data, simulated Scenario 1 welfare gains by WMA as shown in Figure 3B. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated_cutoffs.rdata; Description: Spatial data, simulated Scenario 2 welfare gains by WMA. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated_cutoffs_SGMA.rdata; Description: Spatial data, simulated Scenario 2a welfare gains by WMA. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. Additional files are provided for efficient reproduction of tables and figures. These include: File Name: wma_thresold_dates_Scenario2(a).csv; Description: Wet vs. paper right threshold dates for each WMA. Shown in Figure 2A,B. Produced and used by code calculate_thresolds_Figure2.R File Name: WWRTradeBounds (directory); Description: Trade boundary shapefile required to reproduce Figure 3A-D. Used in code Figure3.R File Name: welfare_region_totals.csv; Description: Welfare gains for the entire study region, as shown in Figure 3E. Used in code Figure3.R File Name: Welfare_gain_by_state_sector.csv; Description: Welfare gains by state and sector, as shown in Figure 3F. Used in code Figure3.R and produced (as a .xlsx file) by code 2_DemandCurves_simulated_trades.R File Name: WECC_MERIT_5min_v3b_mask.nc; Description: Gridded file that identified which land grid cells are in the WBM model domain, used for processing in code Figure4.py File Name: Table_1.csv; Description: All data in Table 1, reproducible from WBM output files using code table_1.R

Economics↗

A stable isotope record of late Quaternary hydrologic change in the northwestern Brooks Range, Alaska (eastern Beringia)

A submillennial-resolution record of lake water oxygen isotope composition (δ 18 O) from chironomid head capsules is presented from Burial Lake, northwest Alaska. The record spans the Last Glacial Maximum (LGM; ~20–16k cal a bp) to the present and shows a series of large lake δ 18 O shifts (~5‰). Relatively low δ 18 O values occurred during a period covering the LGM, when the lake was a shallow, closed-basin pond. Higher values characterize deglaciation (~16–11.5k cal a Bp) when the lake was still closed but lake levels were higher. A rapid decline between ~11 and 10.5k cal a Bp indicates that lake levels rose to overflowing. Lake δ 18 O values are interpreted to reflect the combined effects of changes in lake hydrology, growing season temperature and meteoric source water as well as large-scale environmental changes impacting this site, including opening of the Bering Strait and shifts in atmospheric circulation patterns related to ice-sheet dynamics. The results indicate significant shifts in precipitation minus evaporation across the late Pleistocene to early Holocene transition, which are consistent with temporal patterns of vegetation change and paludification. This study provides new perspectives on the paleohydrology of eastern Beringia concomitant with human migration and major turnover in megafaunal assemblages.

54 ENVIRONMENTAL SCIENCES↗

The first ensemble of kilometer-scale simulations of a hydrological year over the third pole

An accurate understanding of the current and future water cycle over the Third Pole is of great societal importance, given the role this region plays as a water tower for densely populated areas downstream. An emerging and promising approach for skillful climate assessments over regions of complex terrain is kilometer-scale climate modeling. As a foundational step towards such simulations over the Third Pole, we present a multi-model and multi-physics ensemble of kilometer-scale regional simulations for the hydrological year of October 2019 to September 2020. The ensemble consists of 13 simulations performed by an international consortium of 10 research groups, configured with a horizontal grid spacing ranging from 2.2 to 4 km covering all of the Third Pole region. These simulations are driven by ERA5 and are part of a Coordinated Regional Climate Downscaling EXperiment Flagship Pilot Study on Convection-Permitting Third Pole. The simulations are compared against available gridded and in-situ observations and remote-sensing data, to assess the performance and spread of the model ensemble compared to the driving reanalysis during the cold and warm seasons. Although ensemble evaluation is hindered by large differences between the gridded precipitation datasets used as a reference over this region, we show that the ensemble improves on many warm-season precipitation metrics compared with ERA5, including most wet-day and hour statistics, and also adds value in the representation of wet spells in both seasons. As such, the ensemble will provide an invaluable resource for future improvements in the process understanding of the hydroclimate of this remote but important region.

54 ENVIRONMENTAL SCIENCES↗

Coupled Thermo-Hydrological-Mechanical-Chemical Behavior of Anisotropic Granite for Geologic Disposal of High-Level Radioactive Waste: A Core-Scale Laboratory Investigation

The coupled thermo-hydrological-mechanical-chemical (THMC) behavior of rock within an Excavation Damaged Zone (EDZ) is critical for the safety and long-term performance of a geological repository for high-level radioactive wastes. While many laboratory experiments have been conducted to investigate EDZ rocks, the flow and deformation characteristics resulting from anisotropic rock textures and microcrack distribution under triaxial loading and elevated temperatures remain poorly understood. Particularly, cracks at various scales serve as fast paths for fluid flow and solute transport and present as focal points of mechanical weakness, which complicate the coupled THMC processes in anisotropic EDZ rocks and challenge modeling predictions. Here, in this study, a series of core-scale experiments was conducted on three granite samples under repository-relevant conditions. These rock samples were obtained from the Grimsel Underground Research Laboratory (URL), featured by anisotropic minerals (represented by bedding layers) and microcrack distributions and coarse cm-scale grain sizes. During the experiments, samples were subjected to an elevated temperature at 90 °C and different triaxial loading conditions either by radial (normal to bedding layers) or axial (parallel to bedding layers) compaction. Water was injected into the samples, and the rock permeability evolutions and effluent water chemistry were monitored closely. For intact samples, thermal expansion of minerals at 90 °C resulted in a large, 75% irreversible permeability reduction and rock strengthening under radial compaction, while thermal impact was limited to a 15% permeability reduction under axial compaction. In contrast, for a sample containing open cracks, the growth of fractures during the experiment resulted in an abrupt permeability increase and fast failure at 90 °C. The effluent water chemistry indicates much more considerable mineral dissolution from large shear sliding than that in rocks dominated by mechanical compaction. These results helped better understand the coupled THMC processes in anisotropic rocks containing cracks, evaluate the behaviors of EDZ rocks, and predict the long-term evolution of EDZ for the performance of the repositories.

Coupled THMC processes↗

Estimation of stress and stress-induced permeability change in a geological nuclear waste repository in a thermo-hydrologically coupled simulation

Geologic disposal is a promising solution for a safe permanent isolation of accumulated high-level nuclear waste from nuclear powerplants. The behavior of host rock is highly coupled thermally, hydromechanically, and chemically. Numerical simulations of such coupled phenomena for the extremely long term (>100,000 years) and large length scale (>1 km) of geologic disposal remain to be computationally challenging. In this study, a methodology has been developed to approximate stress and stress-induced permeability change in host rock using only thermo-hydrological (TH) variables. A coupled thermo-hydromechanical (THM) simulation is carried out using TOUGH-FLAC simulator to model THM behaviors of a generic nuclear waste repository, in order to evaluate the performance of the developed methodology, which is implemented in a coupled TH simulation. Results show that stress and permeability change estimated by the developed methodology in the TH-coupled simulation match those calculated in the THM-coupled simulation over the simulated timeframe of over 10,000 years. Details about errors in stress and permeability estimates accrued by the developed methodology are discussed here. The developed methodology will help incorporate stress-induced permeability change into existing TH simulators for the long-term radionuclide transport in geologic disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗