Search NASA⌕ Search

SEARCH · Search NASA

Results for “Harmonic numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

On the determination of the long period tidal perturbations in the elements of artificial earth satellites

The magnitude of the tidal effects depends upon the elastic properties of the earth as described by Love numbers. The Love numbers appear as the coefficients in the expansion of the exterior tidal potential in terms of spherical harmonics (in Maxwellian form). A single averaging process was performed only along the parallels of latitude. This process preserves additional long period tidal effects (with periods of a few days or more). It also eliminates the short period effects with periods of one day or less.

Musen, P.↗

Calculation of transonic steady and oscillatory pressures on a low aspect ratio model and comparison with experiment

Pressure data measured by the British Royal Aircraft Establishment for the AGARD SMP tailplane are compared with results calculated using the transonic small perturbation code XTRAN3S. A brief description of the analysis is given and a recently developed finite difference grid is described. Results are presented for five steady and nine harmonically oscillating cases near zero angle of attack and for a range of subsonic and transonic Mach numbers.

Bennett, R. M.↗

The influence of dynamic inflow and torsional flexibility on rotor damping in forward flight from symbolically generated equations

The combined effects of blade torsion and dynamic inflow on the aeroelastic stability of an elastic rotor blade in forward flight are studied. The Helicopter Equations for Stability and Loads (HESL) program is extended to derive the governing equations of motion for the blade, and a Lagrangian formulation is used to obtain the equations in generalized coordinates. The program generates the steady-state and linearized perturbation equations in symbolic form and then codes them into FORTRAN subroutines. The coefficients for each equation and for each mode are identified through a numerical program; the latter can also be used to obtain the harmonic balance equations. The governing multiblade equations are derived explicitly using HESL. These equations can accommodate any number of elastic blade modes. Stability results are presented for several hingeless rotor blade structural models, and the influence of dynamic inflow in forward flight with an elastic hingeless rotor is investigated.

Reddy, T. S. R.↗

Calculation of transonic steady and oscillatory pressures on a low aspect ratio model and comparison with experiment

Pressure data measured by the British Royal Aircraft Establishment for the AGARD SMP tailplane are compared with results calculated using the transonic small perturbation code XTRAN3S. A brief description of the analysis is given and a recently developed finite difference grid is described. Results are presented for five steady and nine harmonically oscillating cases near zero angle of attack and for a range of subsonic and transonic Mach numbers.

Bennett, R. M.↗

Conical Euler solution for a highly-swept delta wing undergoing wing-rock motion

Modifications to an unsteady conical Euler code for the free-to-roll analysis of highly-swept delta wings are described. The modifications involve the addition of the rolling rigid-body equation of motion for its simultaneous time-integration with the governing flow equations. The flow solver utilized in the Euler code includes a multistage Runge-Kutta time-stepping scheme which uses a finite-volume spatial discretization on an unstructured mesh made up of triangles. Steady and unsteady results are presented for a 75 deg swept delta wing at a freestream Mach number of 1.2 and an angle of attack of 30 deg. The unsteady results consist of forced harmonic and free-to-roll calculations. The free-to-roll case exhibits a wing rock response produced by unsteady aerodynamics consistent with the aerodynamics of the forced harmonic results. Similarities are shown with a wing-rock time history from a low-speed wind tunnel test.

Lee, Elizabeth M.↗

Conical Euler simulation and active suppression of delta wing rocking motion

A conical Euler code was developed to study unsteady vortex-dominated flows about rolling highly-swept delta wings, undergoing either forced or free-to-roll motions including active roll suppression. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite volume spatial discretization of the Euler equations on an unstructured grid of triangles. The code allows for the additional analysis of the free-to-roll case, by including the rigid-body equation of motion for its simultaneous time integration with the governing flow equations. Results are presented for a 75 deg swept sharp leading edge delta wing at a freestream Mach number of 1.2 and at alpha equal to 10 and 30 deg angle of attack. A forced harmonic analysis indicates that the rolling moment coefficient provides: (1) a positive damping at the lower angle of attack equal to 10 deg, which is verified in a free-to-roll calculation; (2) a negative damping at the higher angle of attack equal to 30 deg at the small roll amplitudes. A free-to-roll calculation for the latter case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation. The wing rocking motion may be actively suppressed, however, through the use of a rate-feedback control law and antisymmetrically deflected leading edge flaps. The descriptions of the conical Euler flow solver and the free-to-roll analysis are presented. Results are also presented which give insight into the flow physics associated with unsteady vortical flows about forced and free-to-roll delta wings, including the active roll suppression of this wing-rock phenomenon.

Lee, Elizabeth M.↗

A New Representative for Small-Body Gravity Estimation

One of the options proposed in the 2009 Review of the U. S. Human Spaceflight Plans Committee calls for the consideration of robotic and human missions to asteroids. Beginning in 2000, the NEAR Shoemaker spacecraft inserted into orbit about the asteroid 433 Eros, and studied it for a year before landing. The Hayabusa satellite journeyed to 25143 Itokawa, and operated in a proximity of the asteroid for several months before landing to collect a return sample. Additionally, the DAWN satellite, which was launched in 2007, will explore the dwarf-planet Ceres and the asteroid 4 Vesta in the next three years. These are just several examples of current interests in exploring asteroids. In this paper, we explore an alternative for estimating the gravity field of a small body using observations of an orbiting satellite. Our approach uses two new mathematical tools, the quadratures (on a sphere) invariant under the icosahedral group, and a multiresolution representation of the gravity potential. With the near optimal quadratures on the sphere, we minimize the number of parameters needed to recover a function. Also, instead of estimating the coefficients of the spherical harmonics, the new quadratures allow us to estimate directly the values of the gravity field since they offer an analogue of the Lagrange-type interpolation.

Jones, Brandon A.↗

A Taxonomic Classification Approach for Global Spatio-temporal Data

The World Bank, World Health Organization, and other major vendors collectively provide thousands of global time series datasets that focus on issues of the environment, public health, economics, violence, education, and national security. Sorting these data into meaningful information requires the use of data mining techniques to cluster trends into an orderly and manageable number of cases. The World SpatioTemporal Analytics and Mapping (WSTAMP) project database (wstamp.ornl.gov) was developed to spatiotemporally harmonize global vendor data (23,300+ attributes, 200+ locations, 50+ years). Within the WSTAMP analytical environment, Dynamic Time Warping (DTW) has been a highly effective data-driven approach for clustering and mapping these time series into national spatiotemporal behavior maps. Two significant properties have surfaced from this work. First, several recognizable cluster patterns have emerged and persist across a range of locations, attributes, and time frames (e.g., increasing, decreasing, rebounding, peak, oscillating). Secondly, practitioners engaging WSTAMP have noted the explanatory and anticipatory value of these patterns and articulated particular interest in detecting them within the spatiotemporal cube. This need was addressed by shifting DTW-based clustering from an open ended, data-driven implementation to a taxonomic pattern matching approach. This paper presents the method including implementation strategies for visualization and human computer interaction and applies the approach to a sample data set and concludes with next steps.

Stewart, Robert↗

On the optimization of discrete structures with aeroelastic constraints

The paper deals with the problem of dynamic structural optimization where constraints relating to flutter of a wing (or other dynamic aeroelastic performance) are imposed along with conditions of a more conventional nature such as those relating to stress under load, deflection, minimum dimensions of structural elements, etc. The discussion is limited to a flutter problem for a linear system with a finite number of degrees of freedom and a single constraint involving aeroelastic stability, and the structure motion is assumed to be a simple harmonic time function. Three search schemes are applied to the minimum-weight redesign of a particular wing: the first scheme relies on the method of feasible directions, while the other two are derived from necessary conditions for a local optimum so that they can be referred to as optimality-criteria schemes. The results suggest that a heuristic redesign algorithm involving an optimality criterion may be best suited for treating multiple constraints with large numbers of design variables.

Mcintosh, S. C., Jr.↗

Optimization of irradiation configuration using spherical t-designs for laser-direct-drive inertial confinement fusion

Abstract A new class of beam configurations is proposed for symmetric-direct-drive inertial confinement fusion laser systems. These configurations are based on spherical t -designs that are studied in spherical design theory in mathematics (Delsarte et al 1977 Geom. Dedicata 6 363). Employing t -design configurations offers elimination of spherical-harmonic intensity modulations for modes ℓ ⩽ t . Additionally, these configurations provide fast decay of intensity nonuniformities with increasing number of beams and symmetric intensity patterns on the surface of the target. Methods developed in spherical design theory offer a convenient, systematic way of obtaining beam configurations for an arbitrary number of beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Auxiliary heating and current drive physics for the ST-E1 fusion power plant

This work describes the physics basis for the proposed auxiliary heating and current drive system on the ST-E1 fusion power plant. The ST-E1 flattop plasma considered here is fully non-inductive with a bootstrap fraction of 0.9 and the remaining current driven by EC waves. Using the recently published physics-based optimization method for EC launchers (Lopez et al 2025 Plasma Phys. Control. Fusion 67 055012), we show that the target flattop ECCD can be achieved with a net efficiency of 52 kA MW −1 using fundamental O-mode (O1) with frequency range 160–200 GHz launched from the low-field side top half of the vacuum vessel (LFS top-launch). From considering two candidate rampup scenarios, we conclude that LFS top-launch O1 ECCD can be equally effective during the early stages of plasma operation, although poloidal steering might be needed. X-mode waves injected from the LFS midplane are also shown to be effective for rampup even when T e < 1 keV. We also present modeling results for the pre-conceptual design of an ICRH system proposed for ST-E1. Using TORIC, we find that an ICRH system aiming for 42–48 MHz and toroidal mode number n φ ~ 10 robustly achieves dominant ion damping via Helium-3 minority heating transitioning to second-harmonic Tritium heating. We then show that such waves can be efficiently generated by a 5-strap traveling-wave antenna (TWA) using the Petra-M code. The TWA has a 40–45 MHz passband within which ~60% of the power entering the TWA is coupled to the plasma with the remaining ~40% of the power being transmitted through the TWA and possibly recirculated; the power reflected back into the transmission lines is negligible. This passband structure persists even when the evanescent distance is increased by a factor of two, or when the magnetic-field angle is increased by 30°, demonstrating inherent load resilience that will be crucial for effective ICRH on ST-E1.

electron cyclotron↗

The effect of angle of attach on the buckling of Mars entry aeroshells

The buckling modes of four optimized Mars entry aeroshell configurations at angle-of-attack loadings have been calculated. The analysis is based on experimental pressure distributions and was performed with the aid of a buckling digital computer program which treats general asymmetric linearized prebuckling states of branched shells of revolution. Only zero and first harmonic pressure components are treated, these being constructed from windward and leeward meridian pressure data at a mach number of 4.63. The results showed a rather small effect of the unsymmetrical pressure component on buckling for angles of attack up to 15 deg. Comparison of the results for the 120 deg cones to previous results indicates that the common procedure of basing the design on a symmetrized pressure distribution of the windward meridian is a conservative approach.

Cohen, G. A.↗

N-stream approximations to radiative transfer

Schuster's two-stream approximation (1905) is first derived from Chandrasekhar's radiative transfer equation (1950), and then extended to an arbitrary number of streams. The resulting technique for solving the transfer function similar to the discrete ordinate and spherical harmonic methods, is useful for modeling atmospheres with complicated phase functions and moderate optical depths. The resulting n coupled linear differential equations are simple and consume less computer time than other approximations, yet have the same required accuracy. The approximation is also flexible with respect to the choice of patch functions, and no approximations are made on the form of the phase function, other than its expansion into Legendre polynomials. A four-stream approximation is evaluated for a Henyey-Greenstein phase function with an asymmetry factor equal to 0.5.

Acquista, C.↗

Effect of a wind tunnel on the acoustic field from various aeroacoustic sources

The effects of the walls of an enclosed test section wind tunnel on measurements of sound fields from various sources has been studied. The acoustic field from a known source in a wind tunnel has been modeled as an infinitely long duct with constant cross section. The model was solved with a numerical panel technique in a control volume near the source, and matched to an outer analytic solution. Several sample problems were studied in a rectangular duct with and without flow. The results indicate that the presence of the duct affects the acoustic field, and that small changes in the product of duct cross dimensions and the source wave number can change the acoustic field significantly. It is also shown that, for low-frequency helicopter rotor harmonic noise, measured in typical wind tunnel rotor tests, the sound levels beyond one rotor diameter from the hub are unreliable indications of the free-field sound levels.

Mosher, M.↗

Measurement of Unsteady Blade Surface Pressure on a Single Rotation Large Scale Advanced Prop-fan with Angular and Wake Inflow at Mach Numbers from 0.02 to 0.70

Unsteady blade surface pressure data for the Large-Scale Advanced Prop-Fan (LAP) blade operation with angular inflow, wake inflow and uniform flow over a range of inflow Mach numbers of 0.02 to 0.70 is provided. The data are presented as Fourier coefficients for the first 35 harmonics of shaft rotational frequency. Also presented is a brief discussion of the unsteady blade response observed at takeoff and cruise conditions with angular and wake inflow.

Bushnell, P.↗

Conical Euler methodology for unsteady vortical flows about rolling delta wings

A conical Euler methodology was developed to study unsteady vortex-dominated flows about rolling highly swept delta wings undergoing either forced or free-to-roll motions. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite-volume spatial discretization of the Euler equations on an unstructured grid of triangles. Results are presented for a 75-deg swept sharp-leading-edge delta wing at a freestream Mach number of 1.2 and at alpha = 10, 20, and 30 deg. At the 10 and 20 deg, forced harmonic analyses indicate that the rolling moment coefficients provide a positive damping which is verified by free-to-roll calculations. In contrast, at 30 deg, a forced harmonic analysis indicates that the rolling moment coefficient provides a negative damping at the small roll amplitudes. A free-to-roll calculation for this case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation.

Lee, Elizabeth M.↗

In flight measurement of steady and unsteady blade surface pressure of a single rotation large scale advanced prop-fan installed on the PTA aircraft

An experiment was performed by Hamilton Standard, Division of United Technologies Corporation, under contract by LeRC, to measure the blade surface pressure of a large scale, 8 blade model prop-fan in flight. The test bed was the Gulfstream 2 Prop-Fan Test Assessment (PTA) aircraft. The objective of the test was to measure the steady and periodic blade surface pressure resulting from three different Prop-Fan air inflow angles at various takeoff and cruise conditions. The inflow angles were obtained by varying the nacelle tilt angles, which ranged from -3 to +2 degrees. A range of power loadings, tip speeds, and altitudes were tested at each nacelle tilt angle over the flight Mach number range of 0.30 to 0.80. Unsteady blade pressure data tabulated as Fourier coefficients for the first 35 harmonics of shaft rotational frequency and the steady (non-varying) pressure component are presented.

Parzych, D.↗