Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterogeneous systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Pore Resolved Simulations of Joule Heating in Fibrous Media using an Embedded Boundary Method

Joule heating has been regarded as an energy-efficient and sustainable method for heating materials and gases at large scales. The modeling of local temperature effects at pore-resolved scales for such systems, however, has been difficult to achieve due to challenges in coupling thermo-chemical processes in complex porous media and in large representative volume elements (RVEs). To this end, we developed an electro-thermal model at the pore scale to study Joule heating effects in large heterogeneous systems with different microstructures. This was achieved using the level set method to implicitly delineate distinct regions within the domain, and an embedded boundary method to facilitate heat exchange across the fluid-solid interface. Moreover, we applied this method to investigate unsteady non-linear electro-thermal effects in non-woven fibrous graphite conductors for RVEs with characteristic lengths of 2 mm, with different fiber orientations, porosity (80% – 90%) and fiber diameters (10 – 20µm). The coupled equations were solved numerically and they produced peak temperatures greater than 2000 K resulting in heating rates as high as 80,000 K/s. Moreover, the results depended strongly on the microstructure of the fiber skeleton and current density. Geometries with large fibers (∼ 20µm) had the highest average and peak temperatures with the mean temperature increasing by 3.9 % while the peak temperature increased by 9.9 %. Anisotropic domains on the other hand had the lowest mean and peak temperatures with peak and mean temperatures of 2293 K and 1437.7K respectively representing a corresponding 12.1% and 5.1% drop in the temperatures. An increase in porosity from 80% to 90%, however, led to an increase in the peak temperature by 5.1%.

Joule heating↗

Enhanced Remedial Amendment Delivery through Fluid Viscosity Modifications: Experiments and numerical simulations

Abstract Heterogeneity is often encountered in subsurface contamination characterization and remediation. Low-permeability zones are typically bypassed when remedial fluids are injected into subsurface heterogeneous aquifer systems. Therefore, contaminants in the bypassed areas may not be contacted by the amendments in the remedial fluid, which may significantly prolong the remediation operations. Laboratory experiments and numerical studies have been conducted to develop the Mobility-Controlled Flood (MCF) technology for subsurface remediation and to demonstrate the capability of this technology in enhancing the remedial amendments delivery to the lower permeability zones in heterogeneous systems. Xanthan gum, a bio-polymer, was used to modify the viscosity of the amendment-containing remedial solutions. Sodium mono-phosphate and surfactant were the remedial amendment used in this work. The enhanced delivery of the amendments was demonstrated in two-dimensional (2-D) flow cell experiments, packed with heterogeneous systems. The impact of polymer concentration, fluid injection rate, and permeability contract in the heterogeneous systems has been studied. The Subsurface Transport over Multiple Phases (STOMP) simulator was modified to include polymer-induced shear thinning effects. Shear rates of polymer solutions were computed from pore-water velocities using a relationship proposed in the literature. Viscosity data were subsequently obtained from empirical viscosity-shear rate relationships derived from laboratory data. The experimental and simulation results clearly show that the MCF technology is capable of enhancing the delivery of remedial amendments to subsurface lower permeability zones. The enhanced delivery significantly improved the NAPL removal from these zones and the sweeping efficiency on a heterogeneous system was remarkably increased when a polymer fluid was applied. MCF technology is also able to stabilize the fluid displacing front when there is a density difference between the fluids. The modified STOMP simulator was able to predict the experimental observed fluid displacing behavior. The simulator may be used to predict the subsurface remediation performance when a shear thinning fluid is used to remediate a heterogeneous system.

54 ENVIRONMENTAL SCIENCES↗

On the Scalability of Data Reduction Techniques in Current and Upcoming HPC Systems from an Application Perspective

We implement and benchmark parallel I/O methods for the fully-manycore driven particle-in-cell code PIConGPU. Identifying throughput and overall I/O size as a major challenge for applications on today’s and future HPC systems, we present a scaling law characterizing performance bottlenecks in state-of-the-art approaches for data reduction. Consequently, we propose, implement and verify multi-threaded data-transformations for the I/O library ADIOS as a feasible way to trade underutilized host-side compute potential on heterogeneous systems for reduced I/O latency.

Huebl, Axel↗

Machine learning dielectric screening for the simulation of excited state properties of molecules and materials

Accurate and efficient calculations of absorption spectra of molecules and materials are essential for the understanding and rational design of broad classes of systems. Solving the Bethe–Salpeter equation (BSE) for electron–hole pairs usually yields accurate predictions of absorption spectra, but it is computationally expensive, especially if thermal averages of spectra computed for multiple configurations are required. We present a method based on machine learning to evaluate a key quantity entering the definition of absorption spectra: the dielectric screening. We show that our approach yields a model for the screening that is transferable between multiple configurations sampled during first principles molecular dynamics simulations; hence it leads to a substantial improvement in the efficiency of calculations of finite temperature spectra. We obtained computational gains of one to two orders of magnitude for systems with 50 to 500 atoms, including liquids, solids, nanostructures, and solid/liquid interfaces. Importantly, the models of dielectric screening derived here may be used not only in the solution of the BSE but also in developing functionals for time-dependent density functional theory (TDDFT) calculations of homogeneous and heterogeneous systems. Overall, our work provides a strategy to combine machine learning with electronic structure calculations to accelerate first principles simulations of excited-state properties.

36 MATERIALS SCIENCE↗

On-line upgrade of program modules using AdaPT

One purpose of our research is the investigation of the effectiveness and expressiveness of AdaPT, a set of language extensions to Ada 83, for distributed systems. As a part of that effort, we are now investigating the subject of replacing, e.g. upgrading, software modules while the software system remains in operation. The AdaPT language extensions provide a good basis for this investigation for several reasons: they include the concept of specific, self-contained program modules which can be manipulated; support for program configuration is included in the language; and although the discussion will be in terms of the AdaPT language, the AdaPT to Ada 83 conversion methodology being developed as another part of this project will provide a basis for the application of our findings to Ada 83 and Ada 9X systems. The purpose of this investigation is to explore the basic mechanisms of the replacement process. With this purpose in mind, we will avoid including issues whose presence would obscure these basic mechanisms by introducing additional, unrelated concerns. Thus, while replacement in the presence of real-time deadlines, heterogeneous systems, and unreliable networks is certainly a topic of interest, we will first gain an understanding of the basic processes in the absence of such concerns. The extension of the replacement process to more complex situations can be made later. A previous report established an overview of the module replacement problem, a taxonomy of the various aspects of the replacement process, and a solution to one case in the replacement taxonomy. This report provides solutions to additional cases in the replacement process taxonomy: replacement of partitions with state and replacement of nodes. The solutions presented here establish the basic principles for module replacement. Extension of these solutions to other more complicated cases in the replacement taxonomy is direct, though requiring substantial work beyond the available funding.

Waldrop, Raymond S.↗

Toward A High-Performance Emulation Platform for Brain-Inspired Intelligent Systems Exploring Dataflow-Based Execution Model and Beyond

Brain-inspired computing is a novel computing technology based on neural morphological engineering, which draws lessons from methods of human brain information processing and storage. Combining with the high-performance computing (HPC) platform, they constitute the foundation of general artificial intelligence. However, current brain HPC platforms generally suffer from slow speed, poor scalability, and high energy consumption, which severely restrain its potential and circumscribe the development of general artificial intelligence. The dataflow model was first proposed in the 1970s, providing a novel idea for the development of HPC. In addition, the dataflow model shares similar information processing mechanisms with human's neural system, which makes dataflow models naturally suit the emulation of brain-inspired computing. Based on the contemporary progress of the dataflow model, the Codelet model was proposed. Through a fine-grained asynchronous program execution and resource allocation, the Codelet model successfully realized the distributed computing on the heterogeneous system, effectively improved the computing power and speed, and open up a new path to overcome the shortcomings of the existing high-performance computing technology. We propose a dataflow-based emulation platform, aiming at providing high-performance computing technology support for general brain-inspired intelligent system, as well as using characteristics of dataflow models to fully explore the potential of brain-inspired intelligence. As an example, we will select a convolutional neural network (LeNet5) that already has a spectacular user base to initially verify the superiority and feasibility of our proposal.

brain-inspired intelligent system↗

Virial theorem, one-particle density matrix, and equilibrium condition in an external field

Based on the analysis of the virial theorem and stress tensor, it is shown that the average energy of the Coulomb system under a static external field in a given volume is completely defined by a one-particle density matrix. In this case, a one-particle density matrix satisfies a closed equation expressing the equilibrium condition in a given static external field. An expression for the pressure of a heterogeneous system of interacting particles is found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lagrangian formulation of nuclear–electronic orbital Ehrenfest dynamics with real-time TDDFT for extended periodic systems

Here, we present a Lagrangian-based implementation of Ehrenfest dynamics with nuclear–electronic orbital (NEO) theory and real-time time-dependent density functional theory for extended periodic systems. In addition to a quantum dynamical treatment of electrons and selected protons, this approach allows for the classical movement of all other nuclei to be taken into account in simulations of condensed matter systems. Furthermore, we introduce a Lagrangian formulation for the traveling proton basis approach and propose new schemes to enhance its application for extended periodic systems. Validation and proof-of-principle applications are performed on electronically excited proton transfer in the o-hydroxybenzaldehyde molecule with explicit solvating water molecules. These simulations demonstrate the importance of solvation dynamics and a quantum treatment of transferring protons. This work broadens the applicability of the NEO Ehrenfest dynamics approach for studying complex heterogeneous systems in the condensed phase.

Calculus of variations↗

Establishing a geochemical heterogeneity model for a contaminated vadose zone – Aquifer system

A large set of sediment samples from a 1600 m2 experimental plot within a 2.2 km2 vadose zone and groundwater uranium (VI) plume were subject to physical, chemical, and mineralogic characterization. The plot is being used for field experimentation on U(VI) recharge and transport processes within a persistent groundwater plume that exists in the groundwater-river interaction zone of the Columbia River at the U.S. DOE Hanford site. The samples were obtained during the installation of 35 tightly spaced (10 m separation) groundwater monitoring wells. The characterization measurements for each sample included total contaminant concentrations (U and Cu primarily), bicarbonate extractable U(VI), sequential 238U(VI) contaminant desorption Kd, 233U(VI) adsorption Kd, grain size distribution, surface area, extractable poorly crystalline Fe(III) oxides, and mineralogy. The characterization objective was to inform a conceptual model of coupled processes controlling the anomalous longevity of the plume, and to quantify the spatial heterogeneity of the contaminant inventory and the primary properties effecting reactive transport. Correlations were drawn between chemical, physical, and reaction properties, and Gaussian simulation was used to compute multiple 3-D realizations of extractable U(VI), the 233U(VI) adsorption Kd, and the distribution of the reactive < 2 mm fraction. Adsorbed contaminant U(VI) was highest in the vadose zone and the zone of seasonal water table fluctuation lying at its base. Adsorbed U(VI) was measureable, but low, in the groundwater plume region where very high hydraulic conductivities existed. The distribution of adsorbed U(VI) displayed no apparent correlation with sediment physical or chemical properties. Desorption [238U(IV)] and adsorption [233U(VI)] Kd values showed appreciable differences due to mass transfer controlled surface complexation and the effects of long subsurface residence times. The 233U(VI) adsorption Kd, a combined measure of surface complexation strength and site concentration, was relatively uniform throughout the domain, displaying correlation with fines distribution and surface area. The characterization results revealed U(VI) supplied to the groundwater plume through spatially heterogeneous recharge from residual contamination in the zone of seasonal water table fluctuation, and transport of U(VI) controlled by weak, kinetically-controlled surface complexation in the coarse-textured saturated zone. Geostatistical relationships for the adsorbed contaminant U distribution in the characterization domain allow an extrapolation to inventory at the plume scale, a critical unknown for remedial action.

contaminant heterogeniety, uranium groundwater plu↗

The Raman Spectra and Molecular Relaxation Properties of Heterophase Glasses and Melts of K,Ca/CH{sub 3}COO and Li,K,Cs/CH{sub 3}COO

The Raman spectra and conductivity of KCH{sub 3}COO–Ca(CH{sub 3}COO){sub 2} and LiCH{sub 3}COO–KCH{sub 3}COO–CsCH{sub 3}COO vitrified acetate systems doped with fine Al{sub 2}O{sub 3} and SiO{sub 2} powders at various concentrations were investigated. It was established that at temperatures below the glass formation temperature the addition of fine powders of Al{sub 2}O{sub 3} and SiO{sub 2} increases the conductivity of heterophase glasses. It is shown that in the heterogeneous system there are two types of acetate ions differing in relaxation time.

36 MATERIALS SCIENCE↗

Characterization and subcellular localization of an RNA silencing suppressor encoded by Rice stripe tenuivirus

Rice stripe virus (RSV) is a single-stranded (ss) RNA virus belonging to the genus Tenuivirus. RSV is present in many East Asian countries and causes severe diseases in rice fields, especially in China. In this study, we analyzed six proteins encoded by the virus for their abilities to suppress RNA silencing in plant using a green fluorescent protein (GFP)-based transient expression assay. Our results indicate that NS3 encoded by RSV RNA3, but not other five RSV encoded proteins, can strongly suppress local GFP silencing in agroinfiltrated Nicotiana benthamiana leaves. NS3 can reverse the GFP silencing, it can also prevent long distance spread of silencing signals which have been reported to be necessary for inducing systemic silencing in host plants. The NS3 protein can significantly reduce the levels of small interfering RNAs (siRNAs) in silencing cells, and was found to bind 21-nucleotide ss-siRNA, siRNA duplex and long ssRNA but not long double-stranded (ds)-RNA. Both N and C terminal of the NS3 protein are critical for silencing suppression, and mutation of the putative nuclear localization signal decreases its local silencing suppression efficiency and blocks its systemic silencing suppression. The NS3-GFP fusion protein and NS3 were shown to accumulate predominantly in nuclei of onion, tobacco and rice cells through transient expression assay or immunocytochemistry and electron microscopy. In addition, transgenic rice and tobacco plants expressing the NS3 did not show any apparent alteration in plant growth and morphology, although NS3 was proven to be a pathogenicity determinant in the PVX heterogenous system. Taken together, our results demonstrate that RSV NS3 is a suppressor of RNA silencing in planta, possibly through sequestering siRNA molecules generated in cells that are undergoing gene silencing.

60 APPLIED LIFE SCIENCES↗

Development of a change management system

The complexity and interdependence of software on a computer system can create a situation where a solution to one problem causes failures in dependent software. In the computer industry, software problems arise and are often solved with 'quick and dirty' solutions. But in implementing these solutions, documentation about the solution or user notification of changes is often overlooked, and new problems are frequently introduced because of insufficient review or testing. These problems increase when numerous heterogeneous systems are involved. Because of this situation, a change management system plays an integral part in the maintenance of any multisystem computing environment. At the NASA Ames Advanced Computational Facility (ACF), the Online Change Management System (OCMS) was designed and developed to manage the changes being applied to its multivendor computing environment. This paper documents the research, design, and modifications that went into the development of this change management system (CMS).

Parks, Cathy Bonifas↗

Advancing Quantum Many-Body GW Calculations on Exascale Supercomputing Platforms

Advanced ab initio materials simulations face growing challenges as increasing systems and phenomena complexity requires higher accuracy, driving up computational demands. Quantum many-body GW methods are state-of-the-art for treating electronic excited states and couplings but often hindered due to the costly numerical complexity. Here, we present innovative implementations of advanced GW methods within the BerkeleyGW package, enabling large-scale simulations on Frontier and Aurora exascale platforms. Our approach demonstrates exceptional versatility for complex heterogeneous systems with up to 17,574 atoms, along with achieving true performance portability across GPU architectures. We demonstrate excellent strong and weak scaling to thousands of nodes, reaching double-precision core-kernel performance of 1.069 ExaFLOP/s on Frontier (9,408 nodes) and 707.52 PetaFLOP/s on Aurora (9,600 nodes), corresponding to 59.45% and 48.79% of peak, respectively. Our work demonstrates a breakthrough in utilizing exascale computing for quantum materials simulations, delivering unprecedented predictive capabilities for rational designs of future quantum technologies.

Zhang, Benran [University of Southern California, ↗

Direct Breakthrough Curve Prediction From Statistics of Heterogeneous Conductivity Fields

In this paper, we present a methodology to predict the shape of solute breakthrough curves in heterogeneous aquifers at early times and/or under high degrees of heterogeneity, both cases in which the classical macrodispersion theory may not be applicable. The methodology relies on the observation that breakthrough curves in heterogeneous media are generally well described by lognormal distributions, and mean breakthrough times can be predicted analytically. The log-variance of solute arrival is thus sufficient to completely specify the breakthrough curves, and this is calibrated as a function of aquifer heterogeneity and dimensionless distance from a source plane by means of Monte Carlo analysis and statistical regression. Using the ensemble of simulated groundwater flow and solute transport realizations employed to calibrate the predictive regression, reliability estimates for the prediction are also developed. Additional theoretical contributions include heuristics for the time until an effective macrodispersion coefficient becomes applicable, and also an expression for its magnitude that applies in highly heterogeneous systems. Finally, it is seen that the results here represent a way to derive continuous time random walk transition distributions from physical considerations rather than from empirical field calibration.

58 GEOSCIENCES↗

Biomimetic Control over Bimetallic Nanoparticle Structure and Activity via Peptide Capping Ligand Sequence

Here, the controlled design of bimetallic nanoparticles (BNPs) is a key goal in tailoring their catalytic properties. Recently, biomimetic pathways demonstrated potent control over the distribution of different metals within BNPs, but a direct understanding of the peptide effect on the compositional distribution at the interparticle and intraparticle levels remains lacking. We synthesized two sets of PtAu systems with two peptides and correlated their structure, composition, and distributions with the catalytic activity. Structural and compositional analyses were performed by a combined machine learning-assisted refinement of X-ray absorption spectra and Z-contrast measurements by scanning transmission electron microscopy. The difference in the catalytic activities between nanoparticles synthesized with different peptides was attributed to the details of interparticle distribution of Pt and Au across these markedly heterogeneous systems, comprising Pt-rich, Au-rich, and Au core/Pt shell nanoparticles. The total amount of Pt in the shells of the BNPs was proposed to be the key catalytic activity descriptor. This approach can be extended to other systems of metals and peptides to facilitate the targeted design of catalysts with the desired activity.

36 MATERIALS SCIENCE↗

Measuring the effects of distributed database models on transaction availability measures

Data distribution, data replication, and system reliability are key factors in determining the availability measures for transactions in distributed database systems. In order to simplify the evaluation of these measures, database designers and researchers tend to make unrealistic assumptions about these factors. Here, the effect of such assumptions on the computational complexity and accuracy of such evaluations is investigated. A database system is represented with five parameters related to the above factors. Probabilistic analysis is employed to evaluate the availability of read-one and read-write transactions. Both the read-one/write-all and the majority-read/majority-write replication control policies are considered. It is concluded that transaction availability is more sensitive to variations in degrees of replication, less sensitive to data distribution, and insensitive to reliability variations in a heterogeneous system. The computational complexity of the evaluations is found to be mainly determined by the chosen distributed database model, while the accuracy of the results are not so much dependent on the models.

Mukkamala, Ravi↗

NSTX-U advances in real-time deterministic PCIe-based internode communication

Distributing control mechanisms across modern commercial off the shelf (COTS) GNU/Linux systems often introduces difficult to mitigate non-deterministic behavior. Existing methods to address this problem involve non-real-time technologies such as Remote Direct Memory Access (RDMA) over Infiniband or custom Ethernet solutions, such as RDMA over Converged Ethernet (RoCE) or userspace Ethernet drivers, that trade determinism for ease of use or lower cost. The National Spherical Torus Experiment Upgrade (NSTX-U) is pursuing a new design that allows direct communication between heterogeneous systems with scalable, microsecond latency with 1 μs of jitter on that latency, outside of the constant transmission delay at the physical layer. The future design of the NSTX-U Real-time Communication System will utilize direct PCIe-to-PCIe communication with kernel support tuned for low overhead, allowing two (or more, through a switch) real-time (RT) systems to communicate and share resources as one larger entity. As a result, this greatly increases the processing capability of the primary Plasma Control System (PCS), turning previously insurmountable computational challenges into a more manageable divide and conquer parallel task.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CHARMM-GUI Drude prepper for molecular dynamics simulation using the classical Drude polarizable force field

Explicit treatment of electronic polarizability in empirical force fields (FFs) represents an extension over a traditional additive or pairwise FF and provides a more realistic model of the variations in electronic structure in condensed phase, macromolecular simulations. To facilitate utilization of the polarizable FF based on the classical Drude oscillator model, Drude Prepper has been developed in CHARMM-GUI. Drude Prepper ingests additive CHARMM protein structures file (PSF) and pre-equilibrated coordinates in CHARMM, PDB, or NAMD format, from which the molecular components of the system are identified. These include all residues and patches connecting those residues along with water, ions, and other solute molecules. This information is then used to construct the Drude FF-based PSF using molecular generation capabilities in CHARMM, followed by minimization and equilibration. In addition, inputs are generated for molecular dynamics (MD) simulations using CHARMM, GROMACS, NAMD, and OpenMM. Validation of the Drude Prepper protocol and inputs is performed through conversion and MD simulations of various heterogeneous systems that include proteins, nucleic acids, lipids, polysaccharides, and atomic ions using the aforementioned simulation packages. Stable simulations are obtained in all studied systems, including 5 μs simulation of ubiquitin, verifying the integrity of the generated Drude PSFs. Additionally, the ability of the Drude FF to model variations in electronic structure is shown through dipole moment analysis in selected systems. Finally, the capabilities and availability of Drude Prepper in CHARMM-GUI is anticipated to greatly facilitate the application of the Drude FF to a range of condensed phase, macromolecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗