Results for “High-resolution numerical model” — Page 12

NASA NTRSDate not supplied

Physical Properties of the Solar Atmosphere Derived from Comparison of Spectro-Polarimetric SDO/HMI Observables with 3D Radiative MHD Simulations

In this study, we compare the SDO/HMI line-of-sight observables (magnetic field, velocity, continuum intensity, and line depth) with the related physical properties for several dynamo simulation runs performed using the "StellarBox" 3D Radiative MHD code. The modeling of the Fe I 6173 A Stokes profiles is performed using the SPINOR radiative transfer code in the LTE approximation. The reproduced SDO/HMI line-of-sight pipeline is applied to the modeled spectra, and the observables are synthesized with high (numerical) and SDO/HMI (instrumental) resolutions. Correlations between the observables and the physical properties at various heights in the atmosphere are studied for a set of view angles (0, 30, 45, 60, 70, and 80 degrees away from the solar disk center). It is found that the SDO/HMI magnetic field and velocity measurements are unambiguously correlated with physical parameters at certain heights of the solar atmosphere. These heights increase from about 100 km above the photosphere for the disk center case to 300-600 km above the photosphere for the 80-degree case. The heights are found to be slightly lower in regions where stronger magnetic fields are found. The comparison of the photospheric magnetic flux and integrated continuum intensity derived from the SDO/HMI observables and high-resolution observations and spectra is discussed. The results of our study improve physics-based interpretations of the SDO/HMI observables and provide a better understanding of the physical properties of the solar atmosphere.

SMD↗

NASA NTRS2023

Development of High-Resolution Soil Hydraulic Parameters with Use of Earth Observations for Enhancing Root Zone Soil Moisture Product

Regional quantification of energy and water balance fluxes depends inevitably on the estimation of surface and rootzone soil moisture. The simulation of soil moisture depends on the soil retention characteristics, which are difficult to estimate at a regional scale. Thus, the present study proposes a new method to estimate high-resolution Soil Hydraulic Parameters (SHPs) which in turn help to provide high-resolution (spatial and temporal) rootzone soil moisture (RZSM) products. The study is divided into three phases—(I) involves the estimation of finer surface soil moisture (1 km) from the coarse resolution satellite soil moisture. The algorithm utilizes MODIS 1 km Land Surface Temperature (LST) and 1 km Normalized difference vegetation Index (NDVI) for downscaling 25 km C-band derived soil moisture from AMSR-2 to 1 km surface soil moisture product. At one of the test sites, soil moisture is continuously monitored at 5, 20, and 50 cm depth, while at 44 test sites data were collected randomly for validation. The temporal and spatial correlation for the downscaled product was 70% and 83%, respectively. (II) In the second phase, downscaled soil moisture product is utilized to inversely estimate the SHPs for the van Genuchten model (1980) at 1 km resolution. The numerical experiments were conducted to understand the impact of homogeneous SHPs as compared to the three-layered parameterization of the soil profile. It was seen that the SHPs estimated using the downscaled soil moisture (I-d experiment) performed with similar efficiency as compared to SHPs estimated from the in-situ soil moisture data (I-b experiment) in simulating the soil moisture. The normalized root mean square error (nRMSE) for the two treatments was 0.37 and 0.34, respectively. It was also noted that nRMSE for the treatment with the utilization of default SHPs (I-a) and AMSR-2 soil moisture (I-c) were found to be 0.50 and 0.43, respectively. (III) Finally, the derived SHPs were used to simulate both surface soil moisture and RZSM. The final product, RZSM which is the daily 1 km product also showed a nearly 80% correlation at the test site. The estimated SHPs are seen to improve the mean NSE from 0.10 (I-a experiment) to 0.50 (I-d experiment) for the surface soil moisture simulation. The mean nRMSE for the same was found to improve from 0.50 to 0.31.

soil moisture downscaling↗

NASA NTRSDate not supplied

Towards an Optimal Estimation Retrieval of Cirrus Cloud Optical and Microphysical Properties Using Hyperspectral Shortwave Instruments and A Fast Radiative Transfer Algorithm

Cirrus cloud retrieval products (here, cloud optical depth, effective particle size, and cloud top height) are important inputs into numerical weather and climate models. Uncertainties in such retrieval products, as a matter of course, propagate downstream, impacting model calculations. Improvements in high-quality global cirrus cloud optical and microphysical data products from satellite observations are needed to understand and reduce retrieval uncertainties. Hyperspectral instruments produce high-resolution and information-dense radiance spectra, thus offering the opportunity to reduce uncertainties in retrieval products. An optimal estimation-based cirrus cloud optical and microphysical product retrieval is under development for the NASA Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and the Earth Surface Mineral Dust Source Investigation (EMIT) instruments, and the forthcoming Climate Absolute Radiance and Refractivity Observatory Pathfinder (CLARREO-Pathfinder). The spectral coverage of all three instruments includes the ultraviolet, visible, and near-infrared. In this study a very fast radiative transfer model, the Principal Component-based Radiative Transfer Model in the solar spectral region (PCRTM-Solar), is used for forward modeling computations. This will reduce the computational burden in the forward radiance and Jacobian calculations as the cost function is minimized, enabling the entire AVIRIS, EMIT, and CLARREO-Pathfinder spectral range to be used in the optimal estimation framework. Using the entire spectrum will maximize the information content, resulting in a more robust and more accurate retrieval. As a first step, the retrieval is being designed for single layer ice clouds over open ocean water. Preliminary results will be shown.

Jeffrey Mast↗

NASA NTRSDate not supplied

Towards an Optimal Estimation Retrieval of Cirrus Cloud Optical and Microphysical Properties Using Hyperspectral Shortwave Instruments and A Fast Radiative Transfer Algorithm

Cirrus cloud retrieval products (here, cloud optical depth, effective particle size, and cloud top height) are important inputs into numerical weather and climate models. Uncertainties in such retrieval products, as a matter of course, propagate downstream, impacting model calculations. Improvements in high-quality global cirrus cloud optical and microphysical data products from satellite observations are needed to understand and reduce retrieval uncertainties. Hyperspectral shortwave instruments produce high-resolution and information-dense spectra, thus offering the opportunity to reduce uncertainties in retrieval products. We are in the process of developing a retrieval that uses the very fast Principal Component Radiative Transfer Model in the solar spectral region (PCRTM-Solar) in the forward model calculations. This retrieval will use measured reflectances from the NASA Earth Surface Mineral Dust Source Investigation (EMIT) and the forthcoming Climate Absolute Radiance and Refractivity Observatory Pathfinder (CLARREO-Pathfinder) instruments. In this manuscript we present progress towards a reference retrieval employing a widely used, verified, accurate, yet computationally slower radiative transfer modeling technique. The reference retrieval, while too slow for using the complete hyperspectral measurement, will allow us to study the behavior of retrieval products and help us verify results from our in-development fast retrieval. Both retrievals will use the optimal estimation retrieval framework. In this manuscript we present results from an uncertainty analysis considering three uncertainty sources for a cirrus cloud retrieval in the form of error covariance matrices: reflectance uncertainty due to water vapor, the reflectance uncertainty due to ice crystal scattering assumptions, and the instrument measurement uncertainty. Results show that the uncertainty due to habit selection is the largest, while that due to water vapor is at most 0.6% relative to channel reflectance. As a first step, the retrieval is being designed for single layer ice clouds over open ocean water.

Cirrus cloud↗

NASA NTRSDate not supplied

Atmospheric Variability and Measurement Uncertainty: Pitfalls in Averaging in situ Data

Satellite measurements and atmospheric models, two essential components of the integrated global observing system, provide crucial tools for monitoring and predicting regional and global foci, spanning numerous Earth Science fields. Unfortunately, models can lack the spatial and temporal resolution needed to resolve finer scale structure. Satellite measurements also have similar tempo-spatial restriction issues, but additionally can only measure certain species and can have biases that must be evaluated. Ground measurement networks are critical components of this system, by providing both independent inputs of species needed by models (including those that satellites do not provide) and assisting with investigation of biases in satellite products. Similarly, aircraft measurements play a vital role in closing the gaps between satellite measurements, model products, and ground monitoring networks by providing high accuracy, high-resolution data on local to regional spatial scales. Therefore, both ground-based and airborne observations are widely used to assess model predictions and satellite observations. One of the great challenges in using both ground and aircraft data in this fashion is matching the data temporally and spatially to the model/satellite data. A meaningful comparison with model or satellite requires a solid assessment of the variability of the in-situ measurements, which include both the instrument uncertainty and the statistical uncertainty due to atmospheric variability. While instrument uncertainty is generally more straightforwardly characterized, it can be challenging to accurately capture this variability uncertainty as it often presents in a non-Gaussian manner (e.g. emission plumes, frontal passages). We will present results examining spatial and temporal variability over a selection of scales relevant to satellite measurements and models of several in situ measurement species spanning both airborne and ground measurements. The extent of non-Gaussian variability will be quantified, and we will discuss additional statistical parameters that help assess the fitness of gaussian variability assumption when temporally or spatially averaging.

satellite validation↗

NASA NTRSDate not supplied

LES-Based Analysis of Film Cooling in a High-Pressure Turbine Rotor Including Effects of Purge and Tip Flow

Accurate modeling of coolant airflows, which form protective films over turbine blades, is essential for designing fuel-efficient and environmentally sustainable gas turbine engines. Excessive coolant reduces thermal efficiency, while insufficient coolant leads to blade overheating and causes damage. Therefore, precise prediction of flow field interactions with cooling air is critical for optimizing turbine performance. This study numerically investigates the cooling effectiveness of purge and film cooling flows within a high-pressure turbine (HPT) rotor using Large Eddy Simulation (LES). The study utilizes NASA Glenn Research Center’s Glenn-HT solver. The simulation models ethe conditions of the Penn State University START rotating rig. A high-fidelity structured mesh comprising up to 800 million cells is employed to resolve high-Reynolds number flow (Re ≈ 350,000) and to capture intricate secondary flow structures, including tip leakage and purge-induced vortices. Film cooling effectiveness computations are highly sensitive to boundary conditions at the cooling holes and to grid resolution. Even with well-resolved grids and included plena, strong mixing challenges traditional eddy viscosity models. To address this, a simplified configuration is simulated: a truncated row of shaped holes on the suction side near the leading edge and a row on the pressure side, both fed from internal plena while the purge slot and tip clearance are also modeled. Two isothermal LES cases are conducted at two distinct wall temperatures, which yield the adiabatic wall temperature and the heat transfer coefficient. The definition and means of computation of the effectiveness is discussed in this paper. The simulations reveal detailed three-dimensional unsteady flow features, including coherent vortical structures and secondary flows originating from the purge cavity. Film cooling effectiveness and Nusselt number distributions are presented for both the blade surface and tip, highlighting regions of elevated heat transfer and complex thermal behavior. These findings underscore the importance of high-resolution LES and realistic boundary conditions in capturing the dynamics of purge and film cooling, offering valuable insights for improving turbine blade design and thermal management strategies.

Secondary Flows↗

NASA NTRSDate not supplied

A GPU-based Approach for Turbomachinery Application

Accurate modeling of coolant airflows, which form protective films over turbine blades, is essential for designing fuel-efficient and environmentally sustainable gas turbine engines. Excessive coolant reduces thermal efficiency, while insufficient coolant leads to blade overheating and causes damage. Therefore, precise prediction of flow field interactions with cooling air is critical for optimizing turbine performance. This study numerically investigates the cooling effectiveness of purge and film cooling flows within a high-pressure turbine (HPT) rotor using Large Eddy Simulation (LES). The study utilizes NASA Glenn Research Center’s Glenn-HT solver. The simulation models ethe conditions of the Penn State University START rotating rig. A high-fidelity structured mesh comprising up to 800 million cells is employed to resolve high-Reynolds number flow (Re ≈ 350,000) and to capture intricate secondary flow structures, including tip leakage and purge-induced vortices. Film cooling effectiveness computations are highly sensitive to boundary conditions at the cooling holes and to grid resolution. Even with well-resolved grids and included plena, strong mixing challenges traditional eddy viscosity models. To address this, a simplified configuration is simulated: a truncated row of shaped holes on the suction side near the leading edge and a row on the pressure side, both fed from internal plena while the purge slot and tip clearance are also modeled. Two isothermal LES cases are conducted at two distinct wall temperatures, which yield the adiabatic wall temperature and the heat transfer coefficient. The definition and means of computation of the effectiveness is discussed in this paper. The simulations reveal detailed three-dimensional unsteady flow features, including coherent vortical structures and secondary flows originating from the purge cavity. Film cooling effectiveness and Nusselt number distributions are presented for both the blade surface and tip, highlighting regions of elevated heat transfer and complex thermal behavior. These findings underscore the importance of high-resolution LES and realistic boundary conditions in capturing the dynamics of purge and film cooling, offering valuable insights for improving turbine blade design and thermal management strategies.

Gas Turbine↗