Search NASA⌕ Search

SEARCH · Search NASA

Results for “ILLUMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Effects of atmosphere and view and illumination geometry on visible and near infrared radiance data from the advanced very high resolution radiometer (AVHR)

The use of Dave's models to evaluate satellite off-nadir remote sensing of green vegetation cover types by simulating the visible and near-infrared advanced very high resolution radiometer (AVHRR) NOAA-6 and NOAA-7 radiances for three green-leaf biomass levels and bare soil. Ground measurements of surface reflectances were used. The simulations were done along a scan line at 30 deg latitude during the summer solstice, equinox, and winter solstice. The simulation models are described and the effect of atmosphere over moderately vegetated surfaces is discussed. The results show that sensor response to atmospheric path length can be substantial for the AVHRR visible and near-infrared channels and normalized difference values, but they can be minimized by high sun and clear atmospheric viewing. The results indicate that AVHRR data would be most useful for monitoring low green leaf biomas canopies.

Holben, B. N.↗
NASA NTRS1986

Water facilities in retrospect and prospect: An illuminating tool for vehicle design

Water facilities play a fundamental role in the design of air, ground, and marine vehicles by providing a qualitative, and sometimes quantitative, description of complex flow phenomena. Water tunnels, channels, and tow tanks used as flow-diagnostic tools have experienced a renaissance in recent years in response to the increased complexity of designs suitable for advanced technology vehicles. These vehicles are frequently characterized by large regions of steady and unsteady three-dimensional flow separation and ensuing vortical flows. The visualization and interpretation of the complicated fluid motions about isolated vehicle components and complete configurations in a time and cost effective manner in hydrodynamic test facilities is a key element in the development of flow control concepts, and, hence, improved vehicle designs. A historical perspective of the role of water facilities in the vehicle design process is presented. The application of water facilities to specific aerodynamic and hydrodynamic flow problems is discussed, and the strengths and limitations of these important experimental tools are emphasized.

Erickson, G. E.↗
NASA NTRS1987

Archival of Seasat-A satellite scatterometer data merged with in situ data at selected, illuminated sites over the ocean

A large data base of Seasat-A Satellite Scatterometer (SASS) measurements merged with high-quality surface-truth wind, wave, and temperature data has been documented. The data base was developed for all times when selected in situ measurement sites were within the SASS footprint. Data were obtained from 42 sites located in the coastal waters of North America, Australia, Western Europe, and Japan and were assembled by correlating the SASS and surface-truth measurements in both time and distance. These data have been archived on a set of nine-track 6250 bpi ASCII coded magnetic tapes, which are available from the National Technical Information Service.

Schroeder, Lyle C.↗
NASA NTRS1987

Predicting the performance of solar illuminated thermal louvers for the GOES I, J, K instruments

The new series of Geostationary Operational Environmental Satellites (GOES I,J,K,L/M) will have two earth viewing optical instruments which use passive, bi-metallic actuated, blade-type louvers for their thermal control. GOES is a three-axis stabilized spacecraft in geostationary orbit, which means that sun can enter the instrument apertures for several hours before and after local midnight. The solar heat absorbed in the instruments causes the louvers to open thus allowing the radiators to reject the heat. These louvered radiators are located on the north face of the instruments. To perform thermal analyses of the instruments, a modeling method was needed for predicting the thermal characteristics of the louvers. This task was complicated by the fact that sun shines on the louvers during the summer season. A Monte Carlo analytical technique was used to develop absorbed power and effective emissivity tables for the louvers. These tables could be used with the instrument math models to predict the thermal behavior of the instruments. Data from the Monte Carlo analysis showed that solar entrapment could have a significant effect on the heat rejection capability of the louvered radiators.

Mengers, David↗
NASA NTRS1987

Water facilities in retrospect and prospect: An illuminating tool for vehicle design

Water facilities play a fundamental role in the design of air, ground, and marine vehicles by providing a qualitative, and sometimes quantitative, description of complex flow phenomena. Water tunnels, channels, and tow tanks used as flow-diagnostic tools have experienced a renaissance in recent years in response to the increased complexity of designs suitable for advanced technology vehicles. These vehicles are frequently characterized by large regions of steady and unsteady 3-D flow separation and ensuing vortical flows. The visualization and interpretation of the complicated fluid motions about isolated vehicle components and complete configurations in a time and cost effective manner in hydrodynamic test facilities is a key element in the development of flow control concepts, and, hence, improved vehicle designs. A historical perspective of the role of water facilities in the vehicle design process is presented. The application of water facilities to specific aerodynamic and hydrodynamic flow problems is discussed, and the strengths and limitations of these important experimental tools are emphasized.

Erickson, Gary E.↗
NASA NTRS1989

Illuminating a red supergiant wind around SN 1987A

A recently discovered light echo at a radius of about 9 arcsec from SN 1987A is interpreted as the result of a circumstellar shell at a radius of 4.5 pc from the SN. The shell may have its origin in the deceleration of the pre-SN red supergiant wind by the pressure of the surrounding medium. The required pressure is p/k = about 1000 per cu cm K. The echo is predicted to expand and contract over the next 30 yr with a declining surface brightness and a broadening of its width. Colors of the echo compared to those of the larger echoes may show differences in the wavelength dependence of scattering of the circumstellar grains compared to interstellar grains.

Chevalier, Roger A.↗
NASA NTRS1990

Ionized carbon in side-illuminated molecular clouds

The C II fine-structure line has been observed in five sources for which the ionization front/molecular cloud interface is viewed approximately edge-on. The LSR velocity of the C II emission is generally in good agreement with that observed for molecular species such as CO. However, the observed linewidths of 3-14 km/s are typically wider than those of molecular lines and often show rapid spatial variations in the observed regions. The C II brightness temperature are typically equal to or slightly higher than the dust temperature at all locations observed. In the optically thin approximation, C II excitation temperatures are 100 K or more and column densities are 10 to the 18th/sq cm for all sources except M17, which has a more intense and complicated line profile with a larger spatial extent than any other source observed.

Boreiko, R. T.↗
NASA NTRS1990

The infrared continuum spectrum of x ray illuminated molecular gas

In starburst galaxies, active galaxies, and the mysterious ultraluminous infrared galaxies, x rays are likely to interact with molecular gas and dust, thereby inducing infrared emission. X ray heated thermal dust will emit the IR continuum, and x ray photoelectrons will excite an IR emission-line spectrum. Here, researchers model the IR continuum emission characteristic of some selected x ray spectral fluxes, in particular the x ray bremsstrahlung characteristic of supernova and stellar wind bubble shocks in dense media and the power law spectra characteristic of active galactic nuclei. These models are part of a larger project to determine the complete IR spectra, lines plus continuum, of x ray sources embedded in molecular gas. They modeled the thermal emission from grains by calculating a grain temperature/size/composition distribution function, f(T,a,Comp.), which accounts for temperature fluctuations by averaging over all grain thermal histories. In determining the grain thermal distribution, researchers account for both direct grain heating (by x ray absorption and subsequent electron energy deposition) and indirect grain heating (by absorption of the UV emission stimulated by non-thermal photo- and Auger electrons in the gas phase). We let the grain size distribution be proportional to a(exp -3.5), and they consider two types of grain composition: graphites, which we assume to be pure carbon, and silicates, which contain all other depleted heavy elements. They derive the grain composition distribution function from solar abundances and interstellar depletion data.

Voit, G. Mark↗
NASA NTRS1989

An analysis of the moon's surface using reflected illumination from the earth during a waning crescent lunar phase

There have been many articles written concerning the lunar after-glow, the spectacular reflection from the moon's surface, and the possible observation of luminescence on the dark side of the moon. The researcher, using a 600 mm cassegrain telescope lense and Kodak 400 ASA T-Max film, photographed the crescent moon whose dark side was clearly visible by the reflected light from earth. The film was digitized to a Perkin-Elmer 1010M microdensitometer for enhancement and enlargement. The resulting pictures indicate a completely different land pattern formation than observed during a full moon. An attempt is made to analyze the observed structures and to compare them to the pictures observed during the normal full moon. There are boundaries on the digitized dark section of the moon that can be identified with structures seen during the normal full moon. But, these variations do change considerably under enhancement.

Hammond, Ernest C., Jr.↗
NASA NTRS1990

Design, development and testing of an ambient lighting simulator for external illumination of a transport simulator cockpit

Researchers at the NASA-Langley Research Center several years ago began to examine concepts for a facility which could simulate the full range of lighting conditions encountered in flight. The purpose of this facility was to evaluate advanced technology display devices in a cockpit environment. The Aircraft Cockpit Ambient Lighting Simulation System (ACALSS) has been developed to meet that need. The ACALSS surrounds a wide-body part-task simulator cockpit, the Advanced Display Evaluation Cockpit, and interfaces with a VAX 11/780 computer, which is used to host both a math model of a modern transport aircraft and a solar motion model (which animates a servoed sun simulator). Several concepts were evaluated and an efficient design using an ellipsoid reflector and Fresnel luminaires was selected for implementation.

Batson, Vernon M.↗
NASA NTRS1990

X-ray illuminated stellar winds - Ionization effects in the radiative driving of stellar winds in massive X-ray binary systems

This paper presents calculations of the effect of changing X-ray ionization conditions on the radiative force experienced by the stellar wind material in a massive X-ray binary system. The radiative line force from the radiation field of the primary is parameterized in terms of the Castor et al. (1975) force multiplier. The results show that the line force decreases sharply, but in a nonlinear way, with increasing X-ray ionization. The dynamic consequences of this effect are discussed.

Stevens, Ian R.↗
NASA NTRS1991

X-ray-illuminated stellar winds - Optically thick wind models for massive X-ray binaries

The work of Stevens and Kallman (1990) on the effect of accretion-powered X-rays from the neutron star on the dynamics of the line-driven stellar wind of the early-type primary is extended. Radiative force multipliers that now depend on the column of attenuating material, as well as the ionization parameter, are calculated. Optical depth effects are found to suppress the effects of X-ray ionization on the force multipliers. A number of dynamical models for the winds of massive X-ray binary systems (MXRBs) are calculated with these force multipliers. Unlike the optically thin models, self-consistent dynamical solutions are found for reasonable values of the X-ray luminosity. These solutions also reveal the presence of nonlinear mechanisms that affect wind dynamics, whereby relatively small changes in the force multipliers can lead to significant changes in the wind structure. The models find the existence of a self-consistent region of solution at an X-ray luminosity of about 10 to the 36th ergs/s and suggest the possible existence of high-luminosity states.

Stevens, Ian R.↗
NASA NTRS1992

Hubble illuminates the universe

Latest observations by the Hubble Space Telescope (HST) are described, including the first 'parallel' observations (on January 6, 1992) by the two of the Hubble's instruments of two different targets at the same time. On this date, the faint-object camera made images of the quasar 3C 273 in Virgo, while the wide-field and planetary camera recorded an adjacent field. The new HST images include those of the nucleus and the jet of M85, the giant elliptical galaxy at the heart of the Virgo cluster, and what appears to be a black hole of mass 2.6 billion solar masses in M87, and an image of N66, a planetary nebula in the LMC. Other images yield evidence of 'blue stragglers' in the core of 47 Tucanae, a globular cluster about 16,000 light-years from earth. The Goddard spectrograph recorded the spectrum of the star Capella at very high wavelength resolution, which made it possible to measure deuterium from the Big Bang.

Maran, Stephen P.↗
NASA NTRS1992

Millimeter-wave double-dipole antennas for high-gain integrated reflector illumination

A double-dipole antenna backed by a ground plane has been fabricated for submillimeter wavelengths. The double-dipole antenna is integrated on a thin dielectric membrane with a planar detector at its center. Measured feed patterns at 246 GHz agree well with theory and demonstrate a rotationally symmetric pattern with high coupling efficiency to Gaussian beams. The input impedance is around 50 ohms, and will match well to a Schottky diode or SIS detector. The double-dipole antenna served as the feed for a small machined parabolic reflector. The integrated reflector had a measured gain of 37 dB at 119 microns. This makes the double-dipole antenna ideally suited as a feed for high resolution tracking or for long focal length Cassegrain antenna systems.

Filipovic, Daniel F.↗
NASA NTRS1993

Spectral radiation analyses of the GOES solar illuminated hexagonal cell scan mirror back

A ray tracing analytical tool has been developed for the simulation of spectral radiation exchange in complex systems. Algorithms are used to account for heat source spectral energy, surface directional radiation properties, and surface spectral absorptivity properties. This tool has been used to calculate the effective solar absorptivity of the geostationary operational environmental satellites (GOES) scan mirror in the calibration position. The development and design of Sounder and Imager instruments on board GOES is reviewed and the problem of calculating the effective solar absorptivity associated with the GOES hexagonal cell configuration is presented. The analytical methodology based on the Monte Carlo ray tracing technique is described and results are presented and verified by experimental measurements for selected solar incidence angles.

Fantano, Louis G.↗
NASA NTRS1993

The 24 GHz measurements of 2.2 lambda conical horn antennas illuminating a conducting sheet

Monostatic reflection-coefficient magnitude, absolute value of Gamma, measurements occurring between a radiating horn and a metal reflecting plate are presented for a family of three 2.2 lambda diameter conical horn antennas. The three horns have different aperture phase deviations: 6 deg, 22.5 deg, and 125 deg. Measurements of the magnitude of absolute value of Gamma as a function of horn-plate separation (d) extend from an effective antenna aperture short (d = O) to beyond the far-field boundary (d = 2D(sup 2)/lambda, where D is the antenna diameter). Measurement data are presented with various physical environments for each of the horns. Measured scalar data are compared with theoretical data from two models, a numerical model for a circular waveguide aperture in a ground plane and a scalar diffraction theory model. This work was conducted in support of the development effort for a spaceborne multifrequency microwave reflectometer designed to accurately determine the distance from a space vehicle's surface to a reflecting plasma boundary. The metal reflecting plate was used to simulate the RF reflectivity of a critically dense plasma. The resulting configuration, a ground plane mounted aperture facing a reflecting plane in close proximity, produces a strong interaction between the ground plane and the reflecting plate, especially at integral half-wavelength separations. The transition coefficient is characterized by large amplitude variations.

Cross, A. E.↗
NASA NTRS1993

The quantum efficiency of HgCdTe photodiodes in relation to the direction of illumination and to their geometry

A theoretical study of the effect of the direction of the incident light on the quantum efficiency of homogeneous HgCdTe photodiodes suitable for sensing infrared radiation in the 8-12 microns atmospheric window is presented. The probability of an excess minority carrier to reach the junction is derived as a function of its distance from the edge of the depletion region. Accordingly, the quantum efficiency of photodiodes is presented for two geometries. In the first, the light is introduced directly to the area in which it is absorbed (opaque region), while in the second, the light passes through a transparent region before it reaches the opaque region. Finally, the performance of the two types of diodes is analyzed with the objective of finding the optimal width of the absorption area. The quantum efficiency depends strongly on the way in which the light is introduced. The structure in which the radiation is absorbed following its crossing the transparent region is associated with both higher quantum efficiency and homogeneity. In addition, for absorption region widths higher than a certain minimum, the quantum efficiency in this case is insensitive to the width of the absorption region.

Rosenfeld, D.↗