Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPULSE GENERATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Surface waves generated by shallow underwater explosions

Surface water waves generated by surface and near surface point explosions are calculated. Taking the impulse distribution imparted at the water surface by the explosion as the overriding mechanism for transferring energy of the explosive to surface wave motion, the linearized theory of Kranzer and Keller is used to obtain the wave displacement in the far field. The impulse distribution is obtained by integrating the pressure wave over an appropriate time interval on a horizontal surface just beneath the undisturbed water surface. For surface explosions, a modified form of the similarity method first used by Collins and Holt is used to obtain the flow field. In the case of submerged explosions, the flow field is estimated by making necessary modifications to Sedov's similarity solution to account for the venting that accompanies the interaction of the leading (blast) wave with the ocean surface. Surface waves generated by a charge at six depths of placement (0.15 m, 0.30 m, 0.61 m, 0.91 m, 1.37 m, 3.05 m) are considered in addition to surface explosions. The results seem to support the existence of an upper critical depth phenomenon (of the type already established for chemical explosions) for point (nuclear) explosions.

Falade, A.↗
NASA NTRS2003

Next generation ion engines: mission performances

Significant technology advances over the NSTAR DS1 ion engine were sought, especially an increase in specific impulse, total impulse, power and efficiency, and a decrease in propulsion dry mass. Two ion engine designs, one based on a derivative of the NSTAR 30-cm and the other one based on a 40-cm ion engine design, were identified as potential next generation technologies. This paper summarizes the characteristics of the three technologies in question, and their mission performances for Solar System Exploration and Primitive Bodies Exploration missions.

electric propulsion mission analysis↗
NASA NTRS1981

Acoustic performance evaluation of an advanced UH-1 helicopter main rotor system

An experimental investigation of the high-speed impulsive noise characteristics of an advanced main rotor system for the UH-1 helicopter has been conducted. Models of both the advanced main rotor system and the UH-1 main rotor system were tested at one-quarter scale in the Langley 4- by 7-meter (V/STOL) Tunnel using the General Rotor Model System (GRMS). Tests were conducted over a range of simulated flight and descent velocities. The tunnel was operated in the open-throat configuration with acoustic treatment to improve the acoustic characteristics of the test chamber. In-plane acoustic measurements of the high-speed impulsive noise demonstrated a 7 to 8 dB reduction in noise generation is available by using the advanced rotor system on the UH-1 helicopter.

Hoad, D. R.↗
NASA NTRS2011

Multiobjective Optimization of Low-Energy Trajectories Using Optimal Control on Dynamical Channels

We introduce a computational method to design efficient low-energy trajectories by extracting initial solutions from dynamical channels formed by invariant manifolds, and improving these solutions through variational optimal control. We consider trajectories connecting two unstable periodic orbits in the circular restricted 3-body problem (CR3BP). Our method leverages dynamical channels to generate a range of solutions, and approximates the areto front for impulse and time of flight through a multiobjective optimization of these solutions based on primer vector theory. We demonstrate the application of our method to a libration orbit transfer in the Earth-Moon system.

trajectory design↗
NASA NTRS2013

Experiment Description and Results for Arrival Operations Using Interval Management with Spacing to Parallel Dependent Runways (IMSPiDR)

The predicted increase in the number of commercial aircraft operations creates a need for improved operational efficiency. Two areas believed to offer increases in aircraft efficiency are optimized profile descents and dependent parallel runway operations. Using Flight deck Interval Management (FIM) software and procedures during these operations, flight crews can achieve by the runway threshold an interval assigned by air traffic control (ATC) behind the preceding aircraft that maximizes runway throughput while minimizing additional fuel consumption and pilot workload. This document describes an experiment where 24 pilots flew arrivals into the Dallas Fort-Worth terminal environment using one of three simulators at NASA?s Langley Research Center. Results indicate that pilots delivered their aircraft to the runway threshold within +/- 3.5 seconds of their assigned time interval, and reported low workload levels. In general, pilots found the FIM concept, procedures, speeds, and interface acceptable. Analysis of the time error and FIM speed changes as a function of arrival stream position suggest the spacing algorithm generates stable behavior while in the presence of continuous (wind) or impulse (offset) error. Concerns reported included multiple speed changes within a short time period, and an airspeed increase followed shortly by an airspeed decrease.

Baxley, Brian T.↗
NASA NTRS2017

Simultaneous Observations of Traveling Convection Vortices: Ionosphere-Thermosphere Coupling

We present simultaneous observations of magnetosphere-ionosphere-thermosphere coupling over Svalbard during a traveling convection vortex (TCV) event. Various spaceborne and ground-based instruments made coordinated measurements, including magnetometers, particle detectors, an all-sky camera, European Incoherent Scatter (EISCAT) Svalbard Radar, Super Dual Auroral Radar Network (SuperDARN), and SCANning Doppler Imager (SCANDI). The instruments recorded TCVs associated with a sudden change in solar wind dynamic pressure. The data display typical features of TCVs including vortical ionospheric convection patterns seen by the ground magnetometers and SuperDARN radars and auroral precipitation near the cusp observed by the all-sky camera. Simultaneously, electron and ion temperature enhancements with corresponding density increase from soft precipitation are also observed by the EISCAT Svalbard Radar. The ground magnetometers also detected electromagnetic ion cyclotron waves at the approximate time of the TCV arrival. This implies that they were generated by a temperature anisotropy resulting from a compression on the dayside magnetosphere. SCANDI data show a divergence in thermospheric winds during the TCVs, presumably due to thermospheric heating associated with the current closure linked to a field-aligned current system generated by the TCVs. We conclude that solar wind pressure impulse-related transient phenomena can affect even the upper atmospheric dynamics via current systems established by a magnetosphere-ionosphere-thermosphere coupling process.

Kim, Hyomin↗
NASA NTRSDate not supplied

Development of ASCENT Propellant Thrusters and Propulsion Systems

Since the 1960s, hydrazine technology has dominated the market of propulsion technology by providing reliable performance on a wide variety of spacecraft. Efforts to replace hydrazine with a higher-performance and safer alternative have engaged numerous emerging technologies in the industry to mature. ASCENT propellant, also known as AF-M315E, is an example of one such green propellant. Initially developed to provide a safer handling environment than hydrazine, ASCENT offers higher overall performance than a hydrazine equivalent by creating more heat during ignition. The next generation of propulsion technology, based on ASCENT propellant, produces a higher impulse and energy density, expanding the realm of applicable missions from LEO to GEO and beyond. Building on a strong background in small satellite technology and expertise in thermal and oxidation resistant materials, Plasma Processes began several thruster programs for variety of small satellite applications using ASCENT-based technology. Plasma Processes’ background expertise in thermal and oxidation resistant materials provides the necessary foundation to create ASCENT-based technology hardware.

Green Propellant↗
NASA NTRS2015

20-mN Variable Specific Impulse (Isp) Colloid Thruster

Busek Company, Inc., has designed and manufactured an electrospray emitter capable of generating 20 mN in a compact package (7x7x1.7 in). The thruster consists of nine porous-surface emitters operating in parallel from a common propellant supply. Each emitter is capable of supporting over 70,000 electrospray emission sites with the plume from each emitter being accelerated through a single aperture, eliminating the need for individual emission site alignment to an extraction grid. The total number of emission sites during operation is expected to approach 700,000. This Phase II project optimized and characterized the thruster fabricated during the Phase I effort. Additional porous emitters also were fabricated for full-scale testing. Propellant is supplied to the thruster via existing feed-system and microvalve technology previously developed by Busek, under the NASA Space Technology 7's Disturbance Reduction System (ST7-DRS) mission and via follow-on electric propulsion programs. This project investigated methods for extending thruster life beyond the previously demonstrated 450 hours. The life-extending capabilities will be demonstrated on a subscale version of the thruster.

Demmons, Nathaniel↗
NASA NTRS1955

Flight and Preflight Tests of a Ram Jet Burning Magnesium Slurry Fuel and Utilizing a Solid-propellant Gas Generator for Fuel Expulsion

Data obtained from the first flight test of a ram jet utilizing a magnesium slurry fuel are presented. The ram jet accelerated from a Mach number of 1.75 to a Mach number of 3.48 in 15.5 seconds. During this period a maximum values of air specific impulse and gross thrust coefficient were calculated to be 151 seconds and 0.658, respectively. The rocket gas generator used as a fuel-pumping system operated successfully.

Bartlett, Walter, A , jr↗
NASA NTRS1990

Numerical simulations of three-dimensional rotor blade-vortex interactions

A numerical procedure which has been developed (Hassan and Charles, 1989) for the prediction of helicopter blade loads during self-generated blade-vortex interactions (BVI) is described. These BVIs result in significant and frequent impulsive changes in the rotor blade aerodynamic loads and moments that are known to lead to vibrations and severe noise problems. Potential BVIs are identified and tracked in time at even increments of rotor azimuth employing the lifting line helicopter/rotor trim code CAMRAD. The accuracy of the predicted leading edge pressures for self-generated interactions is shown to rely heavily on the user-specified vortex core radius, and more significantly on the CAMRAD-predicted geometry of the interaction vortex elements and their relative orientation with respect to the blade. Thus, the robustness of the surface transpiration approach for modeling subcritical-type BVIs is proven.

Hassan, A. A.↗
DOE OSTI2020

CSAPR2 CMAC 2.0 level c1 data.

Raw data from ARM precipitation radars must be corrected for atmospheric phenomena and instrument characteristics (e.g., attenuation, clutter) to retrieve precipitation properties. The Corrected Moments in Antenna Coordinates Version 2 (CMAC2) value-added product (VAP) is a set of algorithms and code that does such corrections, and it also retrieves precipitation quantities from the radar measurements. Similar to the X-SAPR radars at the ARM main site, C-SAPR2 radar data also needs corrections and improvements. CMAC 2.0 has been updated to work with the ARM C-SAPR 2 radar. Data and fields that have been processed to: correct for velocity aliasing, unfold and generate a cross-polarimetric phase difference that is monotonically increasing, removing impulses caused by non-uniform beam filling and phase shift on backscatter, recalculate specific differential phase using a 20-point Sobel filter on the aforementioned phase, correct for liquid path attenuation using the polarimetric signals, estimate rainfall rates at the gate using the specific attenuation. In addition, CMAC writes the data out into a community-standard format netCDF File using the CF/Radial conventions. The data are therefore compatible with new and existing National Center for Atmospheric Research (NCAR) tools such as RadXConvert for converting to a variety of popular file formats.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Structure of the Uranian rings. I - Square-well model and particle-size constraints

A least squares fitting is added to the diffraction model for the Uranian rings and the model is then used to determine the relative optical depths of the rings at visible and near-IR wavelengths. Light transmission is assumed constant on a scale of a few radial km in the rings. The amount of starlight passing through the rings is calculated from occultations with account taken of a monolayer ring, diffraction effects, and multiple ring layers. A diffracted occultation profile is generated with consideration given to the angular diameter of the star, the impulse response of the detector, and atmospheric aberrations. Calculation procedures which remove noise are outlined and results are compared with the observational data base. The wavelength dependence of optical depth is formulated. It is shown that occultation data do not support the presence of a large fraction of submicron particles. No optical depth variations are projected for 0.88-2.2 microns wavelengths. Unchopped data are needed to verify the model predictions.

Elliot, J. L.↗
NASA NTRS1987

Blade-vortex interaction noise predictions using measured blade surface pressures

The generation of helicopter noise by blade-vortex interactions during descent under impulsive conditions is investigated analytically. A noise-prediction technique is developed on the basis of the dipole source term of the Ffowcs-Williams/Hawkings equation and applied to data from simultaneous blade-pressure and acoustic measurements obtained by Cowan et al. (1986) on a 10-ft-diameter 4-blade rotor model in a wind tunnel. Preliminary results show that input-blade-airload azimuth resolution of 1 deg or better and computational azimuth step size of 2 deg or less are required to achieve good agreement between predicted and recorded acoustic time histories. The need for more sophisticated methods to model chordwise input data and for a more extensive experimental data base is indicated.

Ziegenbein, Perry R.↗
NASA NTRS1989

Recursive form of the eigensystem realization algorithm for system identification

An algorithm is developed for recursively calculating the minimum realization of a linear system from sampled impulse response data. The Gram-Schmidt orthonormalization technique is used to generate an orthonormal basis for factorization of the data matrix. The system matrix thus identified is in upper Hessenberg form, which has advantages for the identification of modal parameters including damping coefficients, frequencies, mode shapes, and modal participation factors. It also has the property that once an element of the system matrix is computed, it is never altered as the dimension of the model is increased in the recursive process. Numerical examples are presented for comparison of the recursive and nonrecursive forms of the eigensystem realization algorithm.

Longman, Richard W.↗
NASA NTRS2002

Experimental Study of the Richtmyer-Meshkov Instability of Incompressible Fluids

The Richtmyer-Meshkov instability of a low Atwood number, miscible, two-liquid system is investigated experimentally. The initially stratified fluids are contained within a rectangular tank mounted to a sled that rides on a vertical set of rails. The instability is generated by dropping the sled onto a coil spring, producing a nearly impulsive upward acceleration. The subsequent freefall that occurs as the container travels upward and then downward on the rails allows the instability to evolve in the absence of gravity. The interface separating the two liquids initially has a well-defined, sinusoidal perturbation that quickly inverts and then grows in amplitude after undergoing the impulsive acceleration. Disturbance amplitudes are measured and compared to theoretical predictions. Linear stability theory gives excellent agreement with the measured initial growth rate, a(sub 0), for single-mode perturbations with the predicted amplitudes differing by less than 10% from experimental measurements up to a nondimensional time ka(sub 0)t = 0.7, where k is the wavenumber. Linear stability theory also provides excellent agreement for the individual mode amplitudes of multi-mode initial perturbations up until the interface becomes multi-valued. Comparison with previously published weakly nonlinear single-mode models shows good agreement up to ka(sub 0)t = 3, while published nonlinear single-mode models provide good agreement up to ka(sub 0)t = 30. The effects of Reynolds number on the vortex core evolution and overall growth rate of the interface are also investigated. Measurements of the overall amplitude are found to be unaffected by the Reynolds number for the range of values studied here. However, experiments carried out at lower values of Reynolds numbers were found to have decreased vortex core rotation rates. In addition, an instability in the vortex cores is observed.

Niederhaus, Charles↗
NASA NTRS2004

3D MHD Models of Active Region Loops

Present imaging and spectroscopic observations of active region loops allow to determine many physical parameters of the coronal loops, such as the density, temperature, velocity of flows in loops, and the magnetic field. However, due to projection effects many of these parameters remain ambiguous. Three dimensional imaging in EUV by the STEREO spacecraft will help to resolve the projection ambiguities, and the observations could be used to setup 3D MHD models of active region loops to study the dynamics and stability of active regions. Here the results of 3D MHD models of active region loops are presented, and the progress towards more realistic 3D MHD models of active regions. In particular the effects of impulsive events on the excitation of active region loop oscillations, and the generation, propagations and reflection of EIT waves are shown. It is shown how 3D MHD models together with 3D EUV observations can be used as a diagnostic tool for active region loop physical parameters, and to advance the science of the sources of solar coronal activity.

Ofman, Leon↗
NASA NTRS2011

A Minimum (Delta)V Orbit Maintenance Strategy for Low-Altitude Missions Using Burn Parameter Optimization

Orbit maintenance is the series of burns performed during a mission to ensure the orbit satisfies mission constraints. Low-altitude missions often require non-trivial orbit maintenance (Delta)V due to sizable orbital perturbations and minimum altitude thresholds. A strategy is presented for minimizing this (Delta)V using impulsive burn parameter optimization. An initial estimate for the burn parameters is generated by considering a feasible solution to the orbit maintenance problem. An example demonstrates the dV savings from the feasible solution to the optimal solution.

Brown, Aaron J.↗
NASA NTRS2011

A Minimum Delta V Orbit Maintenance Strategy for Low-Altitude Missions Using Burn Parameter Optimization

Orbit maintenance is the series of burns performed during a mission to ensure the orbit satisfies mission constraints. Low-altitude missions often require non-trivial orbit maintenance Delta V due to sizable orbital perturbations and minimum altitude thresholds. A strategy is presented for minimizing this Delta V using impulsive burn parameter optimization. An initial estimate for the burn parameters is generated by considering a feasible solution to the orbit maintenance problem. An low-lunar orbit example demonstrates the Delta V savings from the feasible solution to the optimal solution. The strategy s extensibility to more complex missions is discussed, as well as the limitations of its use.

Brown, Aaron J.↗