Search NASA⌕ Search

SEARCH · Search NASA

Results for “INORGANIC COATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Harnessing biomimetic cryptic bonds to form self-reinforcing gels

Cryptic sites, which lay hidden in folded biomolecules, become exposed by applied force and form new bonds that reinforce the biomaterial. While these binding interactions effectively inhibit mechanical deformation, there are few synthetic materials that harness mechano-responsive cryptic sites to forestall damage. Here, we develop a computational model to design polymer gels encompassing cryptic sites and a lower critical solution temperature (LCST). LCST gels swell with a decrease in temperature, thereby generating internal stresses within the sample. The gels also encompass loops held together by the cryptic sites, as well as dangling chains with chemically reactive ends. A decrease in temperature or an applied force causes the loops to unfold and expose the cryptic sites, which then bind to the dangling chains. We show that these binding interactions act as “struts” that reinforce the network, as indicated by a significant decrease in the volume of the gel (from 44% to 80%) and shifts in the volume phase transition temperature. Once the temperature is increased or the deformation is removed, the latter “cryptic bonds” are broken, allowing the loops to refold and the gel to return to its original state. These findings provide guidelines for designing polymer networks with reversible, mechano-responsive bonds, which allow gels to undergo a self-stiffening behavior in response to a temperature-induced internal stress or external force. When applied as a coating, these gels can prevent the underlying materials from undergoing damage and thus, extend the lifetime of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

System Integration of Rationally Designed Dilute Alloy Catalysts for Energy-Efficient Electrochemical CO 2 -To-Fuel Conversion

Energy effiecient electrochemical conversion of CO 2 to high-demand chemicals and transportation fuels using renewable solar and wind energy is a key technology needed for a high-productivity, low-carbon future. However, the development of scalable, low-cost, active, selective, and stable electrocatalysts remains a key challenge that needs to be overcome to enable high-volume conversion of CO 2 to feedstock chemicals for the chemical industry. In previous work, Lawrence Livermore National Laboratory (LLNL) has developed a rational design platform for dilute alloy transition metal electrocatalysts that promise to make electrochemical CO 2 conversion more energy efficient and selective. In this project, we worked with our industrial partners, Twelve and TotalEnergies, to improve scale up, integration, and stability of LLNL’s dilute alloy catalyst technology into an industry-relevant zero gap electrolyzer platform. Through virtual experiments and data analysis, we designed efficient and cost-effective copper-based catalysts. The catalyst was specifically designed to streamline the slowest and most energy-intensive step of the electrochemical chemical transformation of CO 2 to multi-carbon products – that is making the carbon-carbon bond by dimerization of the reaction intermediate carbon monoxide - resulting in up to 10% improvement in energy efficiency for C 2 products while simultaneously increasing the selectivity towards C 2 products. We tested two different scalable catalyst coating technologies and down-selected magnetron sputtering as the technique that provided the best control over catalyst loading, composition, and morphology. Using this technology, we successfully demonstrated integration of our dilute alloy catalysts into a 100 cm 2 electrolyzer platform with Faradaic efficiencies for ethylene production reaching 40% at a current density of 200 mA/cm 2 . We also developed the technology to integrate a well-defined nanoscale porosity by depositing alloy compositions that were compatible with dealloying, that is, selective leaching of an alloy component to generate nanoscale porosity. We observed that integration of the dealloying-derived nanoporosity improved catalyst performance and stability by leading to a more hydrophobic catalyst/anion exchange membrane interface. Unsolved problems that still need to be addressed are corrosion of the Cu catalyst -specifically if the used catalyst is exposed to air - as well as long term stability do to salt formation/deposition and flooding of the catalyst/electrolyzer flow channels, especially at higher current densities. As we only worked on optimization of catalyst composition, coating thickness, and morphology, further performance optimization will require a system level approach that includes optimization of electrolyzer design and membrane technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tuning Hybrid exciton–Photon Fano Resonances in Two-Dimensional Organic–Inorganic Perovskite Thin Films

As easy-to-grow quantum wells with narrow excitonic features at room temperature, two-dimensional (2D) Ruddleson–Popper perovskites are promising for realizing novel nanophotonic devices based on exciton–photon interactions. Here, we demonstrate a distinct hybrid exciton–photon Fano resonance in (C 4 H 9 NH 3 ) 2 PbI 4 thin films prepared via spin coating. Using a classical coupled-oscillator model and finite-difference time-domain simulations, we link the Fano interference to the coupling of the exciton with the Rayleigh-like scattering of the film microstructure. Combining colloidal plasmonic cavities with the 2D perovskite films, we demonstrate tuning of the Fano resonance. In combination with silver nanoparticles, the exciton–photon Fano interference couples to the in-plane plasmonic modes with indications of Rabi splitting. By creating a nanoparticle on mirror geometry, we address the out-of-plane excitonic component, reaching an intermediate coupling regime. Furthermore, these structures suggest possible photonic targets for biomolecular self-assembly applications.

2D perovskites↗
DOE OSTI2024

One-Pot Coating of Ceramic Powders by Exfoliated Boron Nitride Layers with a Dense CO 2 Medium and Ultrasound-Aided Mixing

The coating or doping of substrates by two-dimensional materials to impart superior functional properties (such as improved thermal conductivity, bacterial resistance, reduced friction) is receiving increased attention. Environmentally benign, rapid and scalable coating techniques are desirable for this purpose. Here, we report a novel process for coating alumina, silicon carbide and boron carbide substrates with hexagonal boron nitride (h-BN) layers. The process consists of two sequential steps. First, h-BN layers are exfoliated from bulk h-BN in supercritical carbon dioxide (scCO 2 ) using ultrasound-aided mixing. This step is followed by self-assembly (i.e., coating) of the exfoliated h-BN on the substrates in liquid CO 2 also aided by ultrasound. The liquid CO 2 state is achieved by simply lowering the pressure and temperature of the first step below the critical point of CO 2 (P c = 72.8 atm; T c = 31.1 °C). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) micrographs clearly reveal the exfoliation of h-BN under scCO 2 conditions as well as the h-BN assembly on various substrates under liquid CO 2 conditions. X-ray diffraction patterns confirm the structural integrity of the coated h-BN layers. It was also confirmed that without a transition to the liquid CO 2 phase following exfoliation in scCO 2 , there was negligible coating of h-BN on the substrates. Researchers in the field could consider this benign process to rapidly coat or dope materials with h-BN and other 2D materials to impart improved functional properties in myriad applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Superhydrophobic coating and process of making same

An improved superhydrophobic coating and a process of making it is provided herein. More particularly, a robust superhydrophobic coating is produced by using carbon dioxide to enhance the integration of a binder material into the superhydrophobic coating. The carbon dioxide may be used to infiltrate and fill the interstitial voids of a superhydrophobic material, such as diatomaceous earth. Consequently, occupying these voids in the superhydrophobic material effectively blocks other components (e.g., binders) from entering the voids. As a result, the coating formulations of the present invention are more robust and may strongly adhere to the substrates to which they are applied.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hermetically sealed porous-wall hollow microspheres enabled by monolithic glass coatings: Potential for thermal insulation applications

Thermal insulation materials are crucial to improve the energy performance of buildings and industrial applications. We report an approach to create hermetically vacuum-sealed silica-based hollow microspheres that can lower the thermal conductivity of closed-cell insulation materials. The wall structure of these hollow microspheres includes a reticulated network of pores or channels that extend through the thickness of the wall. When a thin layer of glass material is applied to the wall exterior, followed by a vacuum-assisted thermal treatment process, the coated microsphere surfaces display a highly dense conformal coverage and near-complete elimination of surface porosity. The sealing efficiency of these microspheres is verified by trapping argon within their cavities as well as through evacuating their hollow cores. Notably, incorporating the evacuated microspheres into a polymer matrix resulted in ~27% enhancement in its thermal insulation performance and no notable loss of performance was observed following three months of exposure to ambient conditions. Thus, we believe that the present study offers a commercially viable strategy that opens the door to applications of such inorganic hollow particles in areas ranging from vacuum-based thermal insulation systems to catalysis, separation technologies, and medical fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Application of electrospinning for the fabrication of proton-exchange membrane fuel cell electrodes

We report electrospun materials have been gaining great interest in the energy sector. Their tunability and robustness make them highly attractive, particularly for proton-exchange membrane fuel cell (PEMFC) electrodes. Conventional PEMFC electrodes, prepared by either spraying, painting, or slot-die coating, have not yet met the needs of large-scale PEMFC use. Electrospinning of fibrous materials has already shown great promise as an alternative methodology for electrode fabrication. Electrospinning has been used in fuel cell electrodes through two primary means: (1) segmented carbon or inorganic fibers to serve as precious metal catalyst support, and (2) high aspect ratio polymer/particle fibers to serve directly as the electrode. The use of electrospun fibrous electrodes has led to improved PEMFC durability and increased power output at low catalyst loadings, both of which are of paramount importance to large-scale commercialization of PEMFC electric vehicles.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perovskite-Carbon Nanotube Light-Emitting Fibers

Active fibers with electro-optic functionalities are promising building blocks for the emerging and rapidly growing field of fiber and textile electronics. Yet, there remains significant challenges that require improved understanding of the principles of active fiber assembly to enable the development of fiber-shaped devices characterized by having a small diameter, being lightweight, and having high mechanical strength. To this end, the current frameworks are insufficient, and new designs and fabrication approaches are essential to accommodate this unconventional form factor. Here, we present a first demonstration of a pathway that effectively integrates the foundational components meeting such requirements, with the use of a flexible and robust conductive core carbon nanotube fiber and an organic–inorganic emissive composite layer as the two critical elements. We introduce an active fiber design that can be realized through an all solution-processed approach. In conclusion, we have implemented this technique to demonstrate a three- layered light-emitting fiber with a coaxially coated design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Large exchange-driven intrinsic circular dichroism of a chiral 2D hybrid perovskite

Abstract In two-dimensional chiral metal-halide perovskites, chiral organic spacers endow structural and optical chirality to the metal-halide sublattice, enabling exquisite control of light, charge, and electron spin. The chiroptical properties of metal-halide perovskites have been measured by transmissive circular dichroism spectroscopy, which necessitates thin-film samples. Here, by developing a reflection-based approach, we characterize the intrinsic, circular polarization-dependent complex refractive index for a prototypical two-dimensional chiral lead-bromide perovskite and report large circular dichroism for single crystals. Comparison with ab initio theory reveals the large circular dichroism arises from the inorganic sublattice rather than the chiral ligand and is an excitonic phenomenon driven by electron-hole exchange interactions, which breaks the degeneracy of transitions between Rashba-Dresselhaus-split bands, resulting in a Cotton effect. Our study suggests that previous data for spin-coated films largely underestimate the optical chirality and provides quantitative insights into the intrinsic optical properties of chiral perovskites for chiroptical and spintronic applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Structural Asymmetry and Chiral-Induced Spin Selectivity in Chiral Palladium-Halide Semiconductors

Chiral Pb-free metal-halide semiconductors (MHSs) have attracted considerable attention in the field of spintronics due to various interesting spin-related properties and chiral-induced spin selectivity (CISS) effect. Despite their excellent chemical and structural tunability, the material scope and crystal structure of Pb-free chiral MHSs exhibiting the CISS effect are still limited; chiral MHSs that have metal-halide structures of octahedra and tetrahedra are only reported. Here, we report a new class of chiral MHSs, of which palladium (Pd)-halides are formed in 1D square-pyramidal structures or 0D square-planar structures, with a general formula of ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x (MBA = methylbenzylammonium; x = 0, 0.25, 0.5, 0.75, and 1) for the first time. The crystals adopt the 1D helical chain of Pd-halide square-pyramid (for x = 0, 0.25, 0.5, and 0.75) and 0D structure of Pd-halide square-plane (for x = 1). All the Pd-halides are distorted by the interaction between the halide and the chiral organic ammonium and arranged in a noncentrosymmetric position. Circular dichroism (CD) for ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x indicates that chirality was transferred from chiral organic ammonium to Pd-halide inorganics. ((R-MBA) 2 PdBr 4 ) 1-x ((R-MBA) 2 PdCl 4 ) x (x = 0, 0.25, 0.5, and 0.75) shows a distortion index of 0.127-0.128, which is the highest value among the previously reported chiral MHSs to the best of our knowledge. We also find that (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 crystals grow along the out-of-plane direction during spin coating and have high c-axis orientation and crystallinity, and (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 (x = 0 and 0.5) crystals exhibit a CISS effect in polycrystalline bulk films. In conclusion, these results demonstrate the possibility of a new metal-halide series with square-planar structures or square-pyramidal structures for future spintronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Orientational Order in Spin-Cast Lead-Iodide Perovskite Nanocrystal Solids

Combined synthetic control over size and composition renders colloidal lead-halide perovskite nanocrystals a tunable platform for high-efficiency optoelectronic applications. However, the properties and operational stability of devices based on nanocrystal solids are often dictated by the method of the evaporation-induced assembly. Ubiquitous slow evaporation techniques can produce highly ordered nanocrystal domains but limit the prospects for scalable fabrication of continuous device layers, calling for investigation of approaches to more rapidly form ordered perovskite nanocrystal solids. Here, we study orientationally ordered lead-iodide perovskite nanocrystal solids prepared by conventional spin coating with molecular additives (excess ligand) to enhance ordering within the arrays. In situ X-ray scattering measurements reveal that orientational ordering occurs rapidly upon solvent removal during spin coating and can be further enhanced by manipulating the spin speed. We vary the additive ligand length and explore trade-offs between ordering and layered perovskite impurity formation. Arrays treated with the intermediate-length octylamine ligand exhibit increased in-plane electronic conductivity, suggesting orientational ordering and internanocrystal electronic coupling can be enhanced by the treatment. In conclusion, these results highlight the prospects of establishing long-range order in lead-halide perovskite nanocrystal solids by using simple and fast coating methods.

14 SOLAR ENERGY↗
DOE OSTI2020

Solution-processable integrated CMOS circuits based on colloidal CuInSe2 quantum dots

Abstract The emerging technology of colloidal quantum dot electronics provides an opportunity for combining the advantages of well-understood inorganic semiconductors with the chemical processability of molecular systems. So far, most research on quantum dot electronic devices has focused on materials based on Pb- and Cd chalcogenides. In addition to environmental concerns associated with the presence of toxic metals, these quantum dots are not well suited for applications in CMOS circuits due to difficulties in integrating complementary n - and p -channel transistors in a common quantum dot active layer. Here, we demonstrate that by using heavy-metal-free CuInSe 2 quantum dots, we can address the problem of toxicity and simultaneously achieve straightforward integration of complimentary devices to prepare functional CMOS circuits. Specifically, utilizing the same spin-coated layer of CuInSe 2 quantum dots, we realize both p - and n -channel transistors and demonstrate well-behaved integrated logic circuits with low switching voltages compatible with standard CMOS electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and thermomechanical characteristics of zwitterionic poly(arylene ether sulfone) copolymers

Charge-containing polymeric materials have been widely studied for a range of applications. The fundamental relationships between the charge species, charge density, and the microscale morphology of charge-containing polymers are critical for defining the application in which they may be used. In this work, a series of thermoplastic poly(arylene ether sulfone) (PAES) copolymers with controllable sulfobetaine charge contents (0~100 mol%) and high molecular weights (Mw ~ 65 kDa) were prepared. All the zwitterionic PAESs synthesized showed thermal stability up to 250 °C. DSC and tensile tests showed a decreased T g and mechanical strength with the incorporation of increasing charge density, which suggests a plasticization effect by the charged group. Electron microscopy and X-ray scattering data confirmed the absence of microphase separation in the ion-containing random copolymer system, which corroborated with the observation of a single T g for all zwitterionic copolymers studied. Furthermore, the relative hydrophilicity of the samples was evaluated by water uptake measurements, which revealed that the water uptake of the zwitterionic PAESs can reach up to 64% for the 72 mol% zwitterion copolymer while the free-standing film in the wet state still maintains a Young's modulus of 185 MPa. Here, the thermoplastic charge-containing copolymers in this work demonstrated potential for applications such as coatings or water purification membranes, in which balancing hydrophilicity, processibility, and thermomechanical performance are important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionic Conductive and Highly-Stable Interface for Alkali Metal Anodes

Alkali metals are regarded as the most promising candidates for advanced anode for the next-generation batteries due to their high specific capacity, low electrochemical potential, and lightweight. However, critical problems of the alkali metal anodes, especially dendrite formation and interface stabilization, remain challenging to overcome. The solid electrolyte interphase (SEI) is a key factor affecting Li and Na deposition behavior and electrochemical performances. Herein, a facile and universal approach is successfully developed to fabricate ionic conductive interfaces for Li and Na metal anodes by modified atomic layer deposition (ALD). In this process, the Li metal (or Na metal) plays the role of Li (or Na) source without any additional Li (or Na) precursor during ALD. Moreover, the key questions about the influence of ALD deposition temperature on the compositions and structure of the coatings are addressed. The optimized ionic conductive coatings have significantly improved the electrochemical performances. In addition, the electrochemical phase-field model is performed to prove that the ionic conductive coating is very effective in promoting uniform electrodeposition. Further, this approach is universal and can be potentially applied to other different metal anodes. At the same time, it can be extended to other types of coatings or other deposition techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Grafting-To and From for Multiplexed Chemical-Warfare-Agent Responsive Polymer Brushes

Surface-tethered polymers have important applications in functional polymer coatings, particularly for the development of chemically responsive surfaces. Here, we combined the traditional grafting-to and grafting-from methods to create a new surface grafting strategy, termed grafting-to and from, using surface-initiated ring-opening metathesis polymerization (SI-ROMP). In this method, poly(pentafluorophenyl methacrylate) is grafted to an amine terminated surface. Surplus reactive esters after reaction with surface amines render this polymer a connecting or tie layer that can be further reacted to provide dense ROMP initiation sites. This amplification of grafting sites results in thick and environmentally stable polymer brushes upon SI-ROMP. With the goal of developing polymer-grafted breathable membranes that autonomously react to multiple chemical warfare agents (CWAs), we demonstrate the benefit of this method by employing amine reactive monomers in the grafting-from step. This enables diverse postsynthetic functionalization for the facile screening of chemical motifs to enhance response capabilities to mustard blister agents. Surface-tethered triarylmethanol-containing polymers with four distinct functional groups are prepared and challenged with the vapor of 2-chloroethyl ethyl sulfide (CEES), a simulant of mustard agent, in humid air. Importantly, hydroxyl groups effectively improve CWA response and the resulting polymer brushes show chain collapse after both CEES and diethylchlorophosphate (DCP) treatment. Our results illustrate that the grafting-to and from method can be used to grow functional and robust polymer coatings for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Aqueous-Based Polyimine Functionalization of Cellulose Nanofibrils for Effective Drying and Polymer Composite Reinforcement

Here a simple strategy was developed to synthesize polyimine-coated cellulose nanofibrils (CNF) for effective CNF drying and composite reinforcement. The polyimine was synthesized in an aqueous medium using a selective hydrophilic and hydrophobic component that forces the polyimine to precipitate, which prevents the reverse imine reaction. The polyimine coating allowed the CNF to be easily oven-dried while maintaining a fibrillar morphology to provide mechanical reinforcement in poly(ethylene terephthalate glycol) (PETG) composites. In comparison, poor mechanical performance and a heterogeneous fracture surface were observed when the coated CNF were incorporated into poly(l-lactide) (PLA) composites. It is hypothesized that intermolecular aromatic–aromatic interactions are formed at the interface between fibers and the polymer matrix in the PETG system, while no such phenomena occur in the PLA system. Overall, this facile strategy to produce modified, easily dried CNF can be adapted to produce polyimine-coated CNF with unique functionalities that are useful in a range of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗