Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERLOCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

FPC conditioning cart at BNL

The 703 MHz superconducting gun for the BNL Energy Recovery Linac (ERL) prototype has two fundamental power couplers (FPCs), and each of them will deliver up to 500 kW of CW RF power. In order to prepare the couplers for high power RF service and process multipacting, the FPCs should be conditioned prior to installation into the gun cryomodule. A conditioning cart based test stand, which includes a vacuum pumping system, controllable bake-out system, diagnostics, interlocks and data log system has been designed, constructed and commissioned by collaboration of BNL and AES. This paper presents FPC conditioning cart systems and the conditioning process.

43 PARTICLE ACCELERATORS↗

High Power Testing of RF Cavities for the PEP II B Factory

We describe the process of conditioning and high-power testing of RF cavities for PEP-II. Procedures for vacuum assembly, bakeout and automated processing are described. Interlocks and safety precautions for protection of equipment and personnel are discussed and performance data of tested cavity assemblies are reported. Performance of ancillary components such as windows, couplers and tuners is also discussed. Comments are included on handling, alignment, installation and commissioning issues where appropriate.

43 PARTICLE ACCELERATORS↗

Characterization of an Associated Particle Neutron Generator with ZnO:Ga Alpha-Detector and Active Focusing

A deuterium-tritium (DT) associated particle neutron generator (APNG) with active focusing has been operated using an alpha particle detector made of a ZnO:Ga phosphor with decay time of approximately 1 ns. The APNG is capable of producing 109 neutrons per second. The DT beam spot diameter was adjusted and measured from 7 mm to 2.1 mm with the possibility of achieving 1 mm subject to the removal of a safety interlock protecting the APNG tritiated target. In addition, the alpha detector was found to have a detection efficiency of 88% and sub-nanosecond time resolution (<0.7 ns) using a Burle 8850 bialkali photocathode. Lastly, the neutron beam was obstructed using various amounts of lead shielding to study the generator's imaging contrast capability for neutron radiography. The APNG provides high-rate capability and a large solid angle with acceptance of 8%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SPALLATION NEUTRON SOURCE HIGH-POWER PROTECTION MODULE TEST STAND

The Spallation Neutron Source (SNS) High-Power Protection Module (HPM) provides interlocks and fast shutdown for the radio frequency (RF) system to protect the accelerating structures and high power RF (HPRF) Distribution System. The HPM has required some functional upgrades since the start of beam operations and an upgrade to the HPM test stand was required to support these added features. The HPM test stand currently verifies functionality, RF channel calibration, and measurement of the speed of shutdown to ensure the specifications are met. The upgraded test stand was implemented in a Field Programmable Gate Array (FPGA) to allow for future growth and flexibility. Work is currently progressing on automation of the test stand to better perform the required module calibration schedule.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design of Removable Shield Modules for Nuclear Plant Applications Using Monte Carlo Modeling - 16264

A new modular shielding system has been designed and developed for nuclear plant applications as a replacement for traditional concrete blocks and plugs. The shield comprises interlocking modules that are custom designed using CAD and Monte Carlo modelling methods. The key benefit of these new modules is that they can be quickly removed and re-installed to allow temporary access to high radiation environments e.g. for maintenance and repair of plant equipment at nuclear power plants or waste handling facilities. The traditional method for construction of these removable concrete blocks and plugs was to cast them in place. Within the aging fleet of commercial reactors, some plants are experiencing concrete degradation of these shield blocks and plugs as well as failure of lifting points. Additionally, the existing plugs are difficult to remove and re-install. The new modular system comprises a rigid steel enclosure filled with lead that can be installed in a fraction of the normal time. This approach can accelerate outage times leading to reduced dose uptake to operators and provide significant long term cost savings. Use of Monte Carlo methods enables the shielding modules to be designed efficiently for neutron and gamma ray attenuation with the minimum necessary thickness of lead and steel. Furthermore, the modelling ensures the design is not compromised by streaming pathways, for example at the overlaps between modules or through internal structural components. Shielding modules were supplied to the Brunswick Nuclear Power station (BNP), operated by Duke Energy, located in southeast United States. These modules have been installed to replace concrete shield plugs that are located on the roof above a Feed Water Heaters (FWH) bay. While specific in application, this project demonstrates that the shield module design concept could be expanded to address vertical block walls routinely found in personnel and equipment access hatches. This approach is applicable to a wide variety of new and existing nuclear facilities and will lead to improved safety and reduced lifetime costs all the way through to future decommissioning and dismantling operations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Resonant Kicker System Development at SLAC

The design and installation of the Linear Coherent Light Source [1] at SLAC National Accelerator Laboratory has included the development of a kicker system for selective beam bunch dumping. The kicker is based on an LC resonant topology formed by the 50 uF energy storage capacitor and the 64 uH air core magnet load which has a sinusoidal pulse period of 400us. The maximum magnet current is 500 A. The circuit is weakly damped, allowing most of the magnet energy to be recovered in the energy storage capacitor. The kicker runs at a repetition rate of 120Hz. A PLC-based control system provides remote control and monitoring of the kicker via EPICS protocol. Fast timing and interlock signals are converted by discrete peak-detect and sample-hold circuits into DC signals that can be processed by the PLC. The design and experimental characterization of the system are presented.

43 PARTICLE ACCELERATORS↗

Top-Off Safety Analysis for NSLS-II

Top-off injection will be adopted in NSLS-II. To ensure no injected beam can pass into experimental beamlines with open photon shutters during top-off injection, simulation studies for possible machine fault scenarios are required. We compare two available simulation methods, backward (H. Nishimura-LBL) and forward tracking (A. Terebilo-SLAC). We also discuss the tracking settings, fault scenarios, apertures and interlocks considered in the analysis.

43 PARTICLE ACCELERATORS↗

Design, construction, system integration, and test results of the 1 MW CW RF system for the e-gun cavity in the energy recovery LINAC at Brookhaven National Laboratory

Brookhaven's ERL (Energy Recovery LINAC) requires a 1 MW CW RF system for the superconducting electron gun cavity. The system consists primarily of a klystron tube, transmitter, and High-Voltage Power Supply (HVPS). The 703.75 MHz klystron made by CPl, Inc. provides RF power of 1MW CW with efficiency of 65%. It has a single output window, diode-type electron gun, and collector capable of dissipating the entire beam power. It was fully factory tested including 24-hour heat run at 1.1 MW CWo The solid state HVPS designed by Continental Electronics provides up to 100 kV at low ripple and 2.1 MW CW with over 95% efficiency. With minimal stored energy and a fast shut-down mode no crowbar circuit is needed. Continental 's transmitter includes PLC based user interface and monitoring, RF pre-amplifier, magnet and Vac-Ion pump supplies, cooling water instrumentation, and integral safety interlock system. BNL installed the klystron, HVPS, and transmitter along with other items, such as circulator, water load, and waveguide components. The collaboration of BNL, CPI, and Continental in the design, installation, and testing was essential to the successful operation of the 1MW system.

43 PARTICLE ACCELERATORS↗

The influence of Preslip Sealing on the Permeability Evolution of Fractures and Faults

The evolution of permeability on fractures and faults during the full earthquake cycle is shown to be sensitive to sealing during the repose phase. We explore the combined effect of static loading followed by fracture reactivation on permeability evolution via slide-hold-slide experiments. During the hold periods, permeability exhibits a slow but continuous reduction. The permeability decay is consistent with power law compaction of the aperture coupled with cubic law flow. With increasing hold periods, permeability evolves following reactivation from net reduction to net increase with the magnitude of the permeability change dependent on the hold period. This implies that the tight interlocking of asperities during interseismic repose primes the fault for permeability enhancement following reactivation. The inferred mechanism is via shear dilation with the probable involvement of unclogging. This result identifies that preslip sealing during repose is an essential component in the cyclic permeability evolution throughout the seismic cycle.

58 GEOSCIENCES↗

Reticulated Organic Photovoltaics

This paper shows how the self-assembled interlocking of two nanostructured materials can lead to increased photovoltaic performance. A detailed picture of the reticulated 6-DBTTC/C{sub 60} organic photovoltaic (OPV) heterojunction, which produces devices approaching the theoretical maximum for these materials, is presented from near edge X-ray absorption spectroscopy (NEXAFS), X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray diffraction (GIXD) and transmission electron microscopy (TEM). The complementary suite of techniques shows how self-assembly can be exploited to engineer the interface and morphology between the cables of donor (6-DBTTC) material and a polycrystalline acceptor (C{sub 60}) to create an interpenetrating network of pure phases expected to be optimal for OPV device design. Moreover, we find that there is also a structural and electronic interaction between the two materials at the molecular interface. The data show how molecular self-assembly can facilitate 3-D nanostructured photovoltaic cells that are made with the simplicity and control of bilayer device fabrication. The significant improvement in photovoltaic performance of the reticulated heterojunction over the flat analog highlights the potential of these strategies to improve the efficiency of organic solar cells.

14 SOLAR ENERGY↗

Photoresponsive Rotaxanes Switch Lipid Bilayer Neuromorphic Behavior with Light

A rotaxane consisting of a macrocycle ring with two azobenzene units mechanically interlocked onto a bolaamphiphilic axle was incorporated into droplet interface bilayers (DIBs). The azobenzene groups on the ring underwent quasi-reversible, photoisomerization-induced cycling between 1-E and 1-Z configurations when irradiated with 370 and 467 nm light, respectively, enabling programmable access to different history-dependent electrical behaviors from the same membrane. In the 1-E configuration, bilayers exhibited type-IIactive memristance that coincided with increasingly elevated ionic conduction, associated with progressively enhanced bilayer permeability during voltage cycling. In the 1-Z configuration, bilayers displayed type-I, passive memcapacitive behavior, reflecting tighter lipid packing and reduced ionic permeability. Photoswitching also yielded a nonvolatile, photoresponsive memcapacitor that could be modulated repetitively with negligible loss, likely via reversible changes in membrane thickness. Concurrent ohmic leakage currents across the membrane were less than 0.3%. These results agree with previous studies with increasing membrane permeability using photoswitchable rotaxanes and provide new insights into the coupling between volatile and nonvolatile memcapacitance during photoisomerization. More broadly, they demonstrate a new strategy for the manipulation of neuromorphic behaviors in soft materials using light, with implications for brain-inspired computation and sensing.

droplet interface bilayers↗

Small‐Molecule Mixed Ionic‐Electronic Conductors for Efficient N‐Type Electrochemical Transistors: Structure‐Function Correlations

Abstract The fundamental challenge in electron‐transporting organic mixed ionic‐electronic conductors (OMIECs) is simultaneous optimization of electron and ion transport. Beginning from Y6‐type/U‐shaped non‐fullerene solar cell acceptors, we systematically synthesize and characterize molecular structures that address the aforementioned challenge, progressively introducing increasing numbers of oligoethyleneglycol (OEG; g) sidechains from 1 g to 3 g, affording OMIECs 1gY, 2gY, and 3gY, respectively. The crystal structure of 1gY preserves key structural features of the Y n series: a U‐shaped/planar core, close π–π molecular stacking, and interlocked acceptor groups. Versus inactive Y6 and Y11, all of the new glycolated compounds exhibit mixed ion‐electron transport in both conventional organic electrochemical transistor (cOECT) and vertical OECT (vOECT) architectures. Notably, 3gY with the highest OEG density achieves a high transconductance of 16.5 mS, an on/off current ratio of ~10 6 , and a turn‐on/off response time of 94.7/5.7 ms in vOECTs. Systematic optoelectronic, electrochemical, architectural, and crystallographic analysis explains the superior 3gY‐based OECT performance in terms of denser n gY OEG content, increased crystallite dimensions with decreased long‐range crystalline order, and enhanced film hydrophilicity which facilitates ion transport and efficient redox processes. Finally, we demonstrate an efficient small‐molecule‐based complementary inverter using 3gY vOECTs, showcasing the bioelectronic applicability of these new small‐molecule OMIECs.

Cho, Yongjoon↗

Small‐Molecule Mixed Ionic‐Electronic Conductors for Efficient N‐Type Electrochemical Transistors: Structure‐Function Correlations

Abstract The fundamental challenge in electron‐transporting organic mixed ionic‐electronic conductors (OMIECs) is simultaneous optimization of electron and ion transport. Beginning from Y6‐type/U‐shaped non‐fullerene solar cell acceptors, we systematically synthesize and characterize molecular structures that address the aforementioned challenge, progressively introducing increasing numbers of oligoethyleneglycol (OEG; g) sidechains from 1 g to 3 g, affording OMIECs 1gY, 2gY, and 3gY, respectively. The crystal structure of 1gY preserves key structural features of the Y n series: a U‐shaped/planar core, close π–π molecular stacking, and interlocked acceptor groups. Versus inactive Y6 and Y11, all of the new glycolated compounds exhibit mixed ion‐electron transport in both conventional organic electrochemical transistor (cOECT) and vertical OECT (vOECT) architectures. Notably, 3gY with the highest OEG density achieves a high transconductance of 16.5 mS, an on/off current ratio of ~10 6 , and a turn‐on/off response time of 94.7/5.7 ms in vOECTs. Systematic optoelectronic, electrochemical, architectural, and crystallographic analysis explains the superior 3gY‐based OECT performance in terms of denser n gY OEG content, increased crystallite dimensions with decreased long‐range crystalline order, and enhanced film hydrophilicity which facilitates ion transport and efficient redox processes. Finally, we demonstrate an efficient small‐molecule‐based complementary inverter using 3gY vOECTs, showcasing the bioelectronic applicability of these new small‐molecule OMIECs.

Cho, Yongjoon↗

Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value

Abstract Intercropping (or polyculture) is gaining a lot of interest as it increases yields, allows better utilization of resources (water and nutrients), and provides better land management. The objective of this study is to understand the briquetting characteristics of woody and herbaceous biomass blends, which might result from intercropping. Tests were conducted on blends of lodgepole pine, switchgrass, and corn stover biomass using three hammer mill screen sizes (i.e., 4.8, 12.7, and 19.05 mm), three blend moistures (12%, 15%, and 18%, w.b.), and two‐ and three‐blend ratios (i.e., 1:1 and 1:1:1) using a pilot‐scale hydraulic briquette press. The briquette properties, such as unit and bulk density, durability rating after 5 days of storage (as they tend to attain stable density), and the energy consumption of the process were measured. The results indicate that moisture content of 12% and 15% (w.b.) and smaller hammer mill screen size of 4.8 mm increased the unit and bulk densities to >750 and >430 kg/m 3 and moisture content (15% and 18% (w.b.)) and hammer mill screen size of 12.7 and 19.05 mm produced briquettes with durability rating values of >95%. The higher moisture content of 18% (w.b.) and the hammer mill screen size of 12.7 and 19.05 mm had the highest energy consumption. The proximate and ultimate analysis showed that energy content improved by blending lodgepole pine with both corn stover and switchgrass and also showed increased calorific value and reduced ash content. Scanning electron microscopy micrographs showed interlocking of particles and cracks in the briquettes. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd

Tumuluru, Jaya Shankar↗

A long‐lived Aβ oligomer resistant to fibrillization

Abstract The hydrophobic Aβ peptide is highly aggregation prone; it first forms soluble oligomers, which then convert into the amyloid fibrils found in the cerebral plaques of Alzheimer's disease. It is generally understood that as the peptide concentration of Aβ increases, the fibrillization process is accelerated, but we examine the limits on this phenomenon. We found that once a threshold concentration of Aβ is exceeded, a stable oligomer is formed at the expense of fibril formation. The suppression of fibril formation was observed by amyloid‐binding dye Thioflavin T and solution nuclear magnetic resonance (NMR). Small‐angle X‐ray scattering, size exclusion chromatography, and analytical ultracentrifugation demonstrated that Aβ peptides form a range of compact species, with a dimer being an early highly populated oligomer. Solution NMR allowed us to define the secondary structure of this Aβ dimer, which shows interlocking contacts between C‐terminal peptide strands. Thus, we present a novel Aβ oligomer that resists conversion to fibrils and remains stable for more than one year.

Nick, Mimi↗

Simple and Efficient Synthesis of Explosive Cocrystals containing 3,5-Dimethylpyrazol-1-yl-substituted-1,2,4,5-tetrazines

The reaction of 3,4–dinitropyrazole, 5–nitrotetrazole, or 4–nitro–1,2,3–triazole with 1,2,4,5–tetrazines substituted with 3,5–dimethylpyrazolyl (dmp) groups results in energetic cocrystals after 1 minute of reflux and cooling to room temperature in yields of 89–92 %. Hydrogen–bonding between the dmp group to the N–H of the energetic heterocycles are the predominant interaction that stabilizes the new cocrystals. Each cocrystal packs in a different lattice structure and the cocrystals with sheet–like and herring–bone crystal packing orientations are less sensitive than the cocrystal with the interlocked structure. Electrostatic potential mapping helps rationalize why dmp–substituted tetrazines readily form cocrystals, whereas more electron–deficient pyrazolyl tetrazines do not. Furthermore, the calculated energetic performance of the new cocrystals approaches that of 2,4,6–trinitrotoluene (TNT) and importantly, these materials will aid in the rational design of new cocrystalline energetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triptycene-Based Molecular Rods for Langmuir-Blodgett Monolayers

In this report we introduce fully modular synthesis leading to three representative examples of rigid molecular rods that are intended to form sturdy monolayers on various surfaces. These molecules contain two triptycene units that are designed to interlock into a compact "double-decker" structure. Two of the three final products provided suitable crystals for X-ray diffraction (analyzed on synchrotron), allowing deeper insight into packing in the 3-D crystal lattice. The acidity of all three compounds were determined by capillary electrophoresis, and the pK a values ranged between 2.06-2.53. All three rigid rods easily formed Langmuir-Blodgett monolayers (LBMs) on the water-air interfaces, with the area per molecule equal to 55-59 Å 2 /molecule, suggesting tight intermolecular packing. The thickness of all three films reached ~19 Å after transfer to a gold (111) surface, meaning that individual molecules are tilted maximally 38° from the axis perpendicular to the surface. The structure of one of these films on a gold (111) surface was visualized by AFM. These geometrically unique molecules represent promising platforms with a wide scope of applicability in the supramolecular architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oblique Packing and Tunable Excitonic Coupling in DNA‐Templated Squaraine Rotaxane Dimer Aggregates

Abstract When molecules are aggregated such that their excited states form delocalized excitons, their spatial arrangement, or packing, can be coarsely controlled by templating and finely controlled by chemical substitution; however, challenges remain in controlling their packing on intermediate length scales. Here, we use an approach based on mechanically interlocked molecules to promote an elusive oblique packing arrangement in a series of three squaraine rotaxane dimers. We template the squaraine rotaxane dimers using DNA and observe two excitonically split bands of near‐equal intensity in their absorption spectra – a distinct signature of oblique packing, validated by theoretical modeling of the experimental results. Additional fine control of packing is demonstrated by fluorinating the macrocycle of the rotaxane, which promotes denser packing and stronger excitonic interactions.

36 MATERIALS SCIENCE↗