Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injection Orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Evaluation of Impinging Stream Vortex Chamber Concepts for Liquid Rocket Engine Applications

To pursue technology developments for future launch vehicles, NASA/Marshall Space Flight Center (MSFC) is examining vortex chamber concepts for liquid rocket engine applications. Past studies indicated that the vortex chamber schemes potentially have a number of advantages over conventional chamber methods. Due to the nature of the vortex flow, relatively cooler propellant streams tend to flow along the chamber wall. Hence, the thruster chamber can be operated without the need of any cooling techniques. This vortex flow also creates strong turbulence, which promotes the propellant mixing process. Consequently, the subject chamber concepts not only offer system simplicity, but also enhance the combustion performance. Test results have shown that chamber performance is markedly high even at a low chamber length-to-diameter ratio (LD). This incentive can be translated to a convenience in the thrust chamber packaging. Variations of the vortex chamber concepts have been introduced in the past few decades. These investigations include an ongoing work at Orbital Technologies Corporation (ORBITEC). By injecting the oxidizer tangentially at the chamber convergence and fuel axially at the chamber head end, Knuth et al. were able to keep the wall relatively cold. A recent investigation of the low L/D vortex chamber concept for gel propellants was conducted by Michaels. He used both triplet (two oxidizer orifices and one fuel orifice) and unlike impinging schemes to inject propellants tangentially along the chamber wall. Michaels called the subject injection scheme an Impinging Stream Vortex Chamber (ISVC). His preliminary tests showed that high performance, with an Isp efficiency of 9295, can be obtained. MSFC and the U. S. Army are jointly investigating an application of the ISVC concept for the cryogenic oxygen/hydrocarbon propellant system. This vortex chamber concept is currently tested with gel propellants at AMCOM at Redstone Arsenal, Alabama. A version of this concept for the liquid oxygen (LOX) hydrocarbon fuel (RP-1) system has been derived from the one for the gel propellant. An unlike impinging injector was employed to deliver the propellants to the chamber. MSFC is also conducting an alternative injection scheme, called the chasing injector, associated with this vortex chamber concept. In this injection technique, both propellant jets and their impingement point are in the same chamber cross-sectional plane. Long duration tests (approximately up to 15 seconds) will be conducted on the ISVC to study the thermal effects. This paper will report the progress of the subject efforts at NASA Marshall Space Flight Center. Thrust chamber performance and thermal wall compatibility will be evaluated. The chamber pressures, wall temperatures, and thrust will be measured as appropriate. The test data will be used to validate CFD models, which, in turn, will be used to design the optimum vortex chambers. Measurements in the previous tests showed that the chamber pressures vary significantly with radius. This is due to the existence of the vortices in the chamber flow field. Hence, the combustion efficiency may not be easily determined from chamber pressure. For this project, measured thrust data will be collected. The performance comparison will be in terms of specific impulse efficiencies. In addition to the thrust measurements, several pressure and temperature readings at various locations on the chamber head faceplate and the chamber wall will be made. The first injector and chamber were designed and fabricated based on the available data and experience gained during gel propellant system tests by the U.S. Army. The alternate injector for the ISVC was also fabricated. Hot-fire tests of the vortex chamber are about to start and are expected to complete in February of 2003 at the TS115 facility of MSFC.

Trinh, Huu P.↗
NASA NTRS2009

Austere Human Missions to Mars

This slide presentation reviews a possible mission architecture for a more austere Mars mission, than the one developed by NASA outlined in the Design Reference Architecture 5 (DRA 5). "Austere" architecture is scaled back from DRA 5 and might offer lower development cost, lower flight cost, and lower development risk. This approach will not meet all the DRA 5 mission requirements. Included in the presentation are the elements of an Austere mission, diagrams of the trans-Mars injection (TMI), cruise, and Mars Orbital Insertion for various phases of the mission, the entry descent landing (EDL) concept. The key features of the Transit Habitat (TransHab), the Earth Departure Stage (EDS), the landers, are reviewed. A chart shows the Mass in tons, of the conceptual types of Mars Landers. The EDL concept, EDL Phase diagrams for the Mars Lander are reviewed. New technologies that would be required are also reviewed. Flight test programs for the various parts of the architecture and a flight schedule are reviewed.

transit habitat (TransHab)↗
NASA NTRS2018

SAPS-Associated Explosive Brightening on the Duskside: A New Type of Onset- Like Disturbance

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. We examine high-resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical sub-storm signatures. It is proposed that these injections are caused by the explosive nonlinear growth of a shear flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the "line-tying" effect will also be least stabilizing there. We propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive "onset-like" disturbance that can occur during intervals of strong convection.

Henderson, M. G.↗
NASA NTRS2018

Ion Injection Triggered EMIC Waves in the Earth's Magnetosphere

We present Van Allen Probe observations of electromagnetic ion cyclotron (EMIC) waves triggered solely due to individual substorm-injected ions in the absence of storms or compressions of the magnetosphere during 9 August 2015. The time at which the injected ions are observed directly corresponds to the onset of EMIC waves at the location of Van Allen Probe A (L = 5.5 and 18:06 magnetic local time). The injection was also seen at geosynchronous orbit by the Geostationary Operational Environmental Satellite and Los Alamos National Laboratory spacecraft, and the westward(eastward) drift of ions(electrons) was monitored by Los Alamos National Laboratory spacecraft at different local times. The azimuthal location of the injection was determined by tracing the injection signatures backward intime to their origin assuming a dipolar magnetic field of Earth. The center of this injection location wasdetermined to be close to 20:00 magnetic local time. Geostationary Operational Environmental Satelliteand ground magnetometer responses confirm substorm onset at approximately the same local time.The observed EMIC wave onsets at Van Allen Probe were also associated with a magnetic field decrease.The arrival of anisotropic ions along with the decrease in the magnetic field favors the growth of the EMICwave instability based on linear theory analysis.

Van Allen Probes↗
NASA NTRS1991

Minimum fuel coplanar aeroassisted orbital transfer using collocation and nonlinear programming

The fuel optimal control problem arising in coplanar orbital transfer employing aeroassisted technology is addressed. The mission involves the transfer from high energy orbit (HEO) to low energy orbit (LEO) without plane change. The basic approach here is to employ a combination of propulsive maneuvers in space and aerodynamic maneuvers in the atmosphere. The basic sequence of events for the coplanar aeroassisted HEO to LEO orbit transfer consists of three phases. In the first phase, the transfer begins with a deorbit impulse at HEO which injects the vehicle into a elliptic transfer orbit with perigee inside the atmosphere. In the second phase, the vehicle is optimally controlled by lift and drag modulation to satisfy heating constraints and to exit the atmosphere with the desired flight path angle and velocity so that the apogee of the exit orbit is the altitude of the desired LEO. Finally, the second impulse is required to circularize the orbit at LEO. The performance index is maximum final mass. Simulation results show that the coplanar aerocapture is quite different from the case where orbital plane changes are made inside the atmosphere. In the latter case, the vehicle has to penetrate deeper into the atmosphere to perform the desired orbital plane change. For the coplanar case, the vehicle needs only to penetrate the atmosphere deep enough to reduce the exit velocity so the vehicle can be captured at the desired LEO. The peak heating rates are lower and the entry corridor is wider. From the thermal protection point of view, the coplanar transfer may be desirable. Parametric studies also show the maximum peak heating rates and the entry corridor width are functions of maximum lift coefficient. The problem is solved using a direct optimization technique which uses piecewise polynomial representation for the states and controls and collocation to represent the differential equations. This converts the optimal control problem into a nonlinear programming problem which is solved numerically by using a modified version of NPSOL. Solutions were obtained for the described problem for cases with and without heating constraints. The method appears to be more robust than other optimization methods. In addition, the method can handle complex dynamical constraints.

Shi, Yun Yuan↗
NASA NTRS1981

Theoretical investigation of the generation and injection of electromagnetic waves in space plasma by means of a long-orbiting tether

Analysis of the various mechanisms of electromagnetic wave generation by the shuttle-borne orbiting tether of the T.S.S. Facility shows that significant electrodynamic power levels are available even when overestimating the loss mechanisms expected to intervene. This electrodynamic power is in part dissipated by Joule losses in the tether, in part goes to accelerate electrons through the sheath surrounding the balloon (when in a downward deployment), and in part goes into e.m. wave generation. A preliminary estimate shows that a 100 km tether in orbit would produce ULF/ELF signals that are detectable on the ground with state-of-the-art magnetometric instrumentation.

Dobrowolny, M.↗
NASA NTRS1980

Initial assessment of the effects of energetic ion injections in the magnetosphere due to the transport of satellite power system components from low earth orbit to geosynchronous earth orbit

Potentially serious environmental effects exist when cargo orbital transfer vehicle (COTV) ion propulsion is used on the scale proposed in the preliminary definition studies of the Satellite Power System. These effects of the large scale injections of ion propulsion exhaust in the plasmasphere and in the outer magnetosphere were shown to be highly model dependent with major differences existing in the predicted effects of two models, the ion cloud model and the ion sheath model. The expected total number density deposition of the propellant Ar(+) in the plasmasphere, the energy spectra of the deposited Ar(+) and time dependent behavior of the Ar(+) injected into the plasmasphere by a fleet of COTV vehicles differ drastically between the two models. The ion sheath model was demonstrated to be applicable to the proposed Ar(+) beam physics if the beam was divergent and turbulent whereas the ion cloud model was not a realistic approximation for such a beam because the "frozen-field" assumption on which it is based is not valid.

Curtis, S. A.↗
NASA NTRS1972

Delta-90 Interplanetary Monitoring Platform-H (IMP-H) flash flight report

The Delta-90 launch vehicle and the IMP-H spacecraft were successfully launched from Pad B, Complex 17, Cape Kennedy Air Force Station, Florida, at 2120:00.559 EDT on September 22, 1972. The countdown proceeded smoothly to liftoff with no major difficulties or unscheduled holds. The Delta-90/IMP-H were launched on a pad azimuth of 115 degrees, the vehicle ten rolled to 95 degrees from the north placing the spacecraft in a highly elliptical transfer orbit. Firing the spacecraft kickmotor at 1136 EDT, September 25, 1972, injected the spacecraft into its final desirable near-circular orbit approximately half way between the planet earth and its moon. Vehicle performance of all stages appeared nominal with all sequenced events occurring at the expected times. Data acquisition from all range stations was very good. Damage to the launch pad caused by liftoff was nominal.

Source record↗
NASA NTRSDate not supplied

Robust Cislunar Trajectory Optimization Via Midcourse Correction and Optical Navigation Scheduling

This paper presents a new approach to optimal trajectory design that considers uncertainties in the system, referred to herein as robust trajectory optimization. This approach assumes an existing reference trajectory and optimizes the locations of midcourse correction burns and utilization of onboard navigation sensors to minimize dispersions in ∆v or final position. Navigation errors, maneuver execution errors, orbit insertion errors, and environmental modeling errors are considered. The application in this paper is cislunar flight with the goal of injecting into a Near-Rectilinear Halo Orbit for rendezvous with a target vehicle. Two complementary optimization problems are proposed. One problem minimizes the total ∆v dispersion subject to a final position dispersion constraint. The other problem minimizes the final position dispersion subject to a total ∆v dispersion constraint. The results from each optimization problem are shown for a complete mission profile.

Linear Covariance Analysis↗
NASA NTRS1993

Cross-tail current - Resonant orbits

A technique to generate self-consistent 1D current sheets is described. Groups of monoenergetic protons were followed in a modified Harris magnetic field. This sample current sheet is characterized by resonant quasi-adiabatic orbits. The magnetic moment of a quasi-adiabatic ion which is injected from outside a current sheet changes substantially during the orbit but returns to almost its initial value by the time the ion leaves. Several ion and electron groups were combined to produce a plasma sheet in which the charged particles carry the currents needed to generate the magnetic field in which the orbits were traced. An electric field also is required to maintain charge neutrality. Three distinct orbit types, one involving untrapped ions and two composed of trapped ions, were identified. Limitations associated with the use of a 1D model also were investigated; it can provide a good physical picture of an important component of the cross-tail current, but cannot adequately describe any region of the magnetotail in which the principal current sheet is separated from the plasma sheet boundary layer by a nearly isotropic outer position of the central plasma sheet.

Kaufmann, Richard L.↗
NASA NTRS1992

Effect of inert propellant injection on Mars ascent vehicle performance

A Mars ascent vehicle is limited in performance by the propellant which can be brought from Earth. In some cases the vehicle performance can be improved by injecting inert gas into the engine, if the inert gas is available as an in-situ resource and does not have to be brought from Earth. Carbon dioxide, nitrogen, and argon are constituents of the Martian atmosphere which could be separated by compressing the atmosphere, without any chemical processing step. The effect of inert gas injection on rocket engine performance was analyzed with a numerical combustion code that calculated chemical equilibrium for engines of varying combustion chamber pressure, expansion ratio, oxidizer/fuel ratio, and inert injection fraction. Results of this analysis were applied to several candidate missions to determine how the required mass of return propellant needed in low Earth orbit could be decreased using inert propellant injection.

Colvin, James E.↗
NASA NTRS1983

Preferred orbit planes in the gravitational field of a tumbling spheroidal galaxy

An analytic method is described by means of which the preferred planes into which gas will settle by dissipative differential precession in a slightly nonspherical, nonstatic potential can be determined. Attention is given to the analysis of circular orbit precession in the external potential of a slightly prolate spheroidal mass that is tumbling about a short axis, providing a crude model for barred spiral galaxies as well as for prolate elliptical ones. The results obtained agree with previous work on the existence, orientation, and stability of periodic orbits in triaxial potentials. Depending on the source and injection geometry of the gas and on the nature of dissipation in the gas, the orbital dynamics presented could lead to enhanced, or even catastrophic, radial inflow and to steady state warped structures.

Durisen, R. H.↗
DOE OSTI2024

Unconventional spin-orbit torques from sputtered MoTe 2 films

Materials with strong spin-orbit coupling and low crystalline symmetry are promising for generating large unconventional spin-orbit torques (SOTs), such as in-plane fieldlike (FL) torques and out-of-plane dampinglike (DL) torques, which can effectively manipulate and deterministically switch an out-of-plane magnetization without the need for additional external in-plane magnetic fields. Here, we report SOTs generated by magnetron-sputtered 1⁢T' MoTe 2 /Permalloy (Py; Ni 80 ⁢Fe 20 )/MgO heterostructures using both spin-torque ferromagnetic resonance (ST-FMR) and second harmonic Hall measurements. We observed unconventional FL and DL torques in our samples due to spins polarized normal to the interface of MoTe 2 and Py layers, and studied the influence of crystallographic order and MoTe 2 layer thickness on the SOTs. By comparing the Raman spectra of 1⁢T' MoTe 2 samples prepared in different ways, we found a tensile strain in sputtered MoTe 2 films, which might further enhance the generation of unconventional torques by reducing the symmetry of 1⁢T' MoTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1976

Titian/Centaur D-1TTC-4 Viking A flight data report

Titan/Centaur TC-4 was launched from the Eastern Test Range, Complex 41, at 05:22 PM EDT on Wednesday, August 20, 1975. This was the second operational flight of the newest NASA unmanned launch vehicle. The spacecraft was the Viking A, the first of two orbiting and landing missions to Mars planned for the 1975 Martian launch opportunity. The objective of the launch phase of the mission, to inject the Viking spacecraft onto the planned transfer orbit to Mars, was successfully accomplished. This report presents a review of the launch vehicle system flight data.

Source record↗
NASA NTRS1976

Titan/Centaur D-1T TC-3 Viking B Flight Data Report

Titan/Centaur TC-3 was launched from the Eastern Test Range, Complex 41, at 02:34 PM EDT on Tuesday, September 9, 1975. This was the third operational flight of the newest NASA unmanned launch vehicle. The spacecraft was the Viking B, the second of two orbiting and landing missions to Mars planned for the 1975 Martian launch opportunity. The objective of the launch phase of the mission, to inject the Viking spacecraft onto the planned transfer orbit to Mars, was successfully accomplished. A review of the launch vehicle system flight data is presented.

Source record↗
NASA NTRS2011

A Survey of Ballistic Transfers to Low Lunar Orbit

A simple strategy is identified to generate ballistic transfers between the Earth and Moon, i.e., transfers that perform two maneuvers: a trans-lunar injection maneuver to depart the Earth and a Lunar Orbit Insertion maneuver to insert into orbit at the Moon. This strategy is used to survey the performance of numerous transfers between varying Earth parking orbits and varying low lunar target orbits. The transfers surveyed include short 3-6 day direct transfers, longer 3-4 month low energy transfers, and variants that include Earth phasing orbits and/or lunar flybys.

Transfers↗