Search NASA⌕ Search

SEARCH · Search NASA

Results for “Insulation;”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Possible topological superconductivity in the topological crystalline insulator $\mathrm{(Pb_{1-x} Sn_x)_{1-y}In_yTe}$

Superconductivity in topological insulators is expected to show very unconventional features such as a $p+ip$ order parameter, Majorana fermions, etc. However, intrinsic superconductivity has been observed in a very limited number of materials in which the pairing symmetry is still a matter of debate. Here, we study the topological crystalline insulator (TCI) $\mathrm{(Pb_{1-x} Sn_x)_{1-y}In_yTe}$, for which a peculiar insulator to superconductor transition was previously reported near the gap inversion transition, where the system is nearly a three-dimensional Dirac semimetal. Both the existence of superconductivity near the three-dimensional Dirac semimetal and the occurrence of an insulator to superconductor transition in an isotropic material are highly unusual. We suggest that the observed phenomena are related to the intrinsic instability of a three-dimensional Dirac semimetal state in $\mathrm{(Pb_{1-x} Sn_x)_{1-y}In_yTe}$ and “flattening” of the bulk valence and conduction bands as they acquire a Mexican-hat-like dispersion on the inverted side of the phase diagram. Importantly, this favors the pairing instability if the chemical potential is pinned to these flat regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of magnetic and structural symmetry breaking in forming the Mott insulating gap in Nb 3 ⁢Cl 8

The α-phase of the gapped insulator Nb 3 Cl 8 has recently emerged as the long-sought critical testing bed for examining the importance of strong interelectronic correlation vs symmetry breaking in understanding insulation of such Mott compounds. Structural symmetry breaking detected by density functional theory (DFT) energy lowering (such as dimer formation, disproportionation, or Jahn-Teller distortions) explains insulation in both d-electron Mott-like systems and in non-d-electron cases without recourse to strong correlation. Yet, in Nb 3 Cl 8 , structural symmetry breaking alone (viz. formation of Nb trimers) fails to explain insulation, leading instead to a partially occupied metallic flat band, in contrast with experimental observations. We examine the role of magnetic symmetry breaking, noting that Nb 3 Cl 8 is an observed paramagnet (not an antiferromagnet), thus potentially carrying also short-range ordered magnetic moments. Describing the latter as a polymorphous distribution of nonzero local moments with total zero net magnetization is demonstrated to lower the DFT total energy, while gapping the system without recourse to strong correlation or long-range magnetic order. This suggests that degeneracy removal by symmetry breaking in mean-field-like approaches—either structural, or magnetic, or both—can reduce or eliminate the need for strong correlation, allowing the use of DFT for such Mott systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orbital Chern Insulator and Quantum Phase Diagram of a Kagome Electron System with Half-Filled Flat Bands

In this work, we study the quantum phase diagram of electrons on kagome lattice with half-filled lowest flat bands by considering the antiferromagnetic Heisenberg interaction J, and short-range Coulomb interaction V. In the weak J regime, we identify a fully spin-polarized phase. The presence of finite V drives a spontaneous chiral current, which makes the system an orbital Chern insulator by contributing an orbital magnetization. Such an out-of-plane orbital magnetization allows the presence of a Chern insulating phase independent of the spin orientation in contrast to the spin-orbit coupling induced Chern insulator that disappears with inplane ferromagnetism constrained by symmetry. Such a symmetry difference provides a criterion to distinguish the physical origin of topological responses in kagome systems. The orbital Chern insulator is robust against small coupling J. By further increasing J, we find that the ferromagnetic topological phase is suppressed, which first becomes partially polarized and then enters a nonmagnetic phase with spin and charge nematicity. The frustrated flat band allows the spin and Coulomb interaction to play an essential role in determining the quantum phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Competing Zero-Field Chern Insulators in Superconducting Twisted Bilayer Graphene

The discovery of magic angle twisted bilayer graphene has unveiled a rich variety of superconducting, magnetic, and topologically nontrivial phases. Here, we show that the zero-field states at odd integer filling factors in h-BN nonaligned devices are consistent with symmetry broken Chern insulators, as is evidenced by the observation of the anomalous Hall effect near moiré cell filling factor ν = +1. The corresponding Chern insulator has a Chern number C = ±1 and a relatively high Curie temperature of T c ≈ 4.5 K. In a perpendicular magnetic field above B > 0.5 T we observe a transition of the ν = +1 Chern insulator from Chern number C = ±1 to C = 3, characterized by a quantized Hall plateau with R yx = h/3e 2 . These observations demonstrate that interaction-induced symmetry breaking leads to zero-field ground states that include almost degenerate and closely competing Chern insulators, and that states with larger Chern numbers couple most strongly to the B field. In addition, the device reveals strong superconducting phases with critical temperatures of up to T c ≈ 3.5 K. By providing the first demonstration of a system that allows gate-induced transitions between magnetic and superconducting phases, our observations mark a major milestone in the creation of a new generation of quantum electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermiology and transport properties of the candidate topological crystalline insulator SrAg 4 ⁢Sb 2

Compared to time-reversal symmetry-protected ℤ 2 topological insulators and Dirac/Weyl semimetals, there are significantly fewer candidates for topological crystalline insulators. SrAg 4 ⁢Sb 2 is predicted to exhibit topological crystalline insulator behavior when considering spin-orbit coupling. In this study, we systematically investigate single crystals of SrAg 4 ⁢Sb 2 using electrical transport and magnetic torque measurements, along with first-principles calculations. Our transport data reveals its compensated semimetal nature with a magnetoresistance up to around 700% at 2 K and 9 T. Analysis of de Haas–van Alphen oscillations uncovers a Fermi surface consisting of three distinct Fermi pockets with light effective masses. Comparison between the three-dimensional fermiology obtained from our oscillation data and the first-principles calculations demonstrates excellent agreement. This confirms the accuracy of the calculations, which indicate a band inversion centered at the 𝑇 point and identify the existence of nontrivial tube and needle hole Fermi pockets at Γ, alongside one trivial diamond electron pocket at the 𝐹 point in the Brillouin zone. Furthermore, symmetry and topology analysis results in two potential sets of topological invariants, suggesting the emergence of two-dimensional gapless Dirac surface states either on the 𝑎⁢𝑏 planes or on both the 𝑎⁢𝑏 planes and mirror planes, protected by crystal symmetries. Therefore, SrAg 4 ⁢Sb 2 emerges as a promising candidate topological crystalline insulator.

36 MATERIALS SCIENCE↗

Thermal activation signatures of the Anderson insulator and the Wigner solid forming near ν = 1

When interactions overcome disorder, integer quantum Hall plateaus support topological phases with different bulk insulators. In the center of the ν = 1 plateau the bulk is an Anderson-type insulator, while in the flanks of the plateau the bulk is the integer quantum Hall Wigner solid. We find that the activation energy along the ν = 1 plateau exhibits a very dramatic nonmonotonic dependence on the magnetic field, a dependence that is strongly correlated with the stability regions of the two phases. Furthermore, the activation energy has an unexpected minimum at the boundary between the Anderson insulator and the Wigner solid. Our findings constrain the theory of the integer quantum Hall Wigner solid, determine its thermodynamic properties, and reveal unusual behavior at the boundary between the Anderson insulator and the Wigner solid. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Full-Wave and Circuit-Based Simulations of Cable Insulation Aging/Damage Using Time-Frequency Domain Reflectometry

This paper presents a combined full-wave and circuit-based simulation study to investigate the important topic of cable insulation aging and physical damage. The analysis employs the time-frequency domain reflectometry (TFDR) technique that combines the advantages of both time domain reflectometry (TDR) and frequency domain reflectometry (FDR) for improved location identification and feature resolution. Coaxial cable sections with a location containing insulation aging or physical damage are simulated using Ansys High Frequency Structure Simulator (HFSS). Simulated scattering (S) parameters are then imported into the Advanced Design System (ADS) solver for time domain simulation where a Gaussian windowed chirp signal or ‘chirplet’ is launched. Finally, continuous wavelet transform (CWT) is applied in MATLAB to perform time-frequency analysis of the reflected waveforms. The results reveal that a small change in the relative permittivity of the insulation or the presence of a small point of physical damage on the insulation is reflected as a considerable change in the CWT magnitude demonstrating the efficacy of the method.

cable aging, Non Destructive Examination, time-fre↗

Detection of diffusion limited oxidation in thermally aged ethylene propylene rubber cable insulation material

The lifetime prediction of electrical cable insulation in nuclear power plants (NPPs) is primarily based on accelerated aging. Polymeric insulation exposed to accelerated aging at high temperatures may demonstrate diffusion limited oxidation (DLO) where oxygen within the material is consumed faster than can be supplied by diffusion from the surrounding air. This situation leads to equilibrium oxidation at the exposed surfaces and limited oxidation away from the surfaces. Therefore, DLO results in a heterogeneously aged material which can lead to underestimation of lifetime for in-service cable insulation. In this study, the presence of inhomogeneous aging caused by DLO was evaluated on cross-sectioned cable insulation specimens made of ethylene propylene rubber (EPR). The studies were performed on thermally aged specimens (165 °C, 1 day and 165 °C, 16 days) using local measurement techniques including nanoindentation, micro-Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) - energy dispersive spectroscopy (EDS). All the results indicate some degree of heterogenous aging, with 165 °C, 16 days, aging demonstrating highest degree of oxidative degradation on the inside edges presumably caused due to copper catalyzed oxidation.

Pallaka, Madhusudhan Reddy↗

Dose Rate Effects in the Aging of Nuclear Cable Insulation Subjected to Gamma Radiation

In nuclear power plants (NPPs), the aging of polymer-based electrical cable insulation must be effectively monitored to ensure the safe and reliable operation of NPPs. Gamma radiation is one of the main environmental stressors causing degradation of cable insulation. For a given total dose of absorbed gamma radiation, damage due to gamma irradiation may be dose rate dependent. The purpose of this work is to confirm whether a dose rate effect exists for the cable insulation made by crosslinked polyethylene (XLPE) and ethylene propylene rubber (EPR), quantify the relationship between degradation rate and dose rate, and explore the correlation of different measured properties. The dose rate effects at 1800 Gy/h, 200 Gy/h, and 100 Gy/h using 60Co gamma irradiation on cable aging was studied. Different types of cable insulation, including two XLPEs and one EPR, were irradiated at the different dose rates with a total dose around 300 kGy at 26 °C. The properties of unirradiated and irradiated samples were characterized by mass change, yellowness index, and other ongoing measurements. Dose rate effects were observed for mass change data of XLPE and EPR.

Li, Donghui↗

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design Considerations for High-Voltage Insulated Gate Drive Power Supply for 10-kV SiC MOSFET Applied in Medium-Voltage Converter

High-performance gate drive power supply (GDPS) plays a crucial role in ensuring the reliability and safety of the gate driver for power semiconductor devices. This article focuses on the design of a high-voltage-insulated GDPS for the 10-kV silicon carbide MOSFET in medium-voltage (MV) application. Design considerations, including insulation scheme, high-voltage-insulated transformer design, and load voltage regulation scheme, are proposed. In addition, the performance of the secondary-side-regulated (SSR) GDPS and that of the primary-side-regulated (PSR) GDPS are compared for several aspects, including interwinding capacitance, load voltage regulation rate, conversion efficiency, and hardware complexity. Finally, an SSR GDPS and a PSR GDPS, with an insulation voltage of 20 kV, are built in the lab. Furthermore, the test results demonstrate that the PSR GDPS is more preferable because of lower interwinding capacitance, lower load voltage regulation rate, higher conversion efficiency, and simpler control circuit.

42 ENGINEERING↗

Enhancement of chiral edge currents in ($d$+1)-dimensional atomic Mott-band hybrid insulators

We consider the effect of a local interatomic repulsion on synthetic heterostructures where a discrete synthetic dimension is created by Raman processes on top of SU(N) S U ( N ) -symmetric two-dimensional lattice systems. At a filling of one fermion per site, increasing the interaction strength, the system is driven towards a Mott state which is adiabatically connected to a band insulator. The chiral currents associated with the synthetic magnetic field increase all the way to the Mott transition, where they reach the maximum value, and they remain finite in the whole insulating state. The transition towards the Mott-band insulator is associated with the opening of a gap within the low-energy quasiparticle peak, while a mean-field picture is recovered deep in the insulating state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nondestructive Evaluation of Rexolite Insulators for the Purpose of Monitoring the Structural Health of Particle Accelerator

Rexolite is a cross-linked polystyrene plastic with stable electrical properties into the gigahertz frequency range. The ability to withstand high voltage makes Rexolite one of the most used materials as insulators for particle accelerators. Although, Rexolite’s poor outgassing performance relative to traditional vacuum materials such as stainless steel or aluminum deems the necessity to treat Rexolite prior to its use as insulators. Insulators are mandatory for an accelerator system because a uniform electric field is required to ensure the alignment of the accelerated particles. Furthermore, to operate properly, a particle accelerator is required to maintain a high vacuum or even an ultrahigh vacuum. Although, because outgassing is the major contributor to the gas load of a vacuum system, Rexolite insulators with uncontrolled outgassing characteristics can severely damage the particle accelerator. Disassembly and reassembly of a complex system like a particle accelerator is also time consuming.

36 MATERIALS SCIENCE↗

Automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using state of the art laser technology

The increasing complexity and scale of pulsed power systems necessitate effective maintenance strategies to ensure optimal performance and safety. This report investigates the automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using advanced laser cleaning technologies. The motivation for this research stems from the limitations of current manual cleaning methods, which are labor-intensive and pose health risks due to hazardous materials. The study addresses the problem of surface flashover, a significant issue affecting insulator performance, by evaluating two innovative cleaning techniques: Pulsed Laser Cleaning (PLC) and Flash Lamp Annealing (FLA). Experimental results demonstrate that PLC effectively restores the dielectric strength of Rexolite insulators, while FLA shows limited success. The findings highlight the potential for automated cleaning solutions to enhance safety and efficiency in insulator maintenance, paving the way for future advancements in pulsed power technology.

42 ENGINEERING↗

Designing the Insulation System for Motors in Electrified Aircraft: Optimization, Partial Discharge Issues and Use of Advanced Materials

Designing the insulation system for motors to be used in electrical aircraft requires efforts for maximizing specific power, but, in parallel, particular attention to achieve high reliability. As a major harm for organic insulation systems is partial discharges, design must be able to infer their likelihood during any operation stage and handle their potential inception. This paper proposes a new approach to carry out optimized or conservative insulation system designs which can provide the specified life at the chosen failure probability as well as look at the option of possibly reducing the risk of partial discharges to zero, at any altitude. Examples of designing turn, phase to ground and phase-to-phase insulation systems are reported, with cases where the design can be optimized and other cases where the optimized design does not pass IEC testing standard. Therefore, the limits for design feasibility as a function of the required level of safety and reliability are discussed, showing that the presence of partial discharges cannot be always avoided even through conservative design criteria. Therefore, the use of advanced, corona-resistant materials must be considered, in order to reach a higher, sometimes redundant, level of reliability.

Ramin, Robin (ORCID:0000000211455006)↗

Topological insulator-based high efficiency switching of magnetic unit, method and applications

A magneto-electronic device may include: a spin-orbit torque (SOT) generator layer; a magnetic memory layer; and/or sensing electrodes configured to measure a Hall effect of the magnetic memory layer. The SOT generator layer may include topological insulator material, and the magnetic memory layer may include ferromagnetic material with perpendicular magnetic anisotropy. A magneto-electronic device may include: a spin-orbit torque (SOT) generator layer; a first magnetic memory layer on the SOT generator layer; an insulating layer on the first magnetic memory layer; and/or a second magnetic memory layer on the insulating layer. The SOT generator layer may include topological insulator material. The first magnetic memory layer and the second magnetic memory layer may include ferromagnetic material with either perpendicular magnetic anisotropy or in-plane magnetic anisotropy.

36 MATERIALS SCIENCE↗

Fast, Accurate, and Reliable Thermal Metrology to Assess the Thermal Resistivity on Small Samples of Thermal Insulation

Developing new insulation materials having a thermal resistivity greater than 69 m K/W (10 hr ft2 °F/Btu/inch) can be appealing for building envelope retrofit and construction of new buildings. Multiple institutions are involved in the development of innovative insulation materials with high thermal resistivity. However, these projects have struggled in the development of new materials due to the difficulty associated with the measurement of small sections of high thermal resistivity materials. As new materials are being developed, the size of each test specimen impacts the cost of development. Given the lack of a reliable method to measure the thermal resistivity on small samples of such materials, we evaluated experimental techniques that can be improved to satisfy the need for testing small sections of high thermal resistivity materials and developed standardized test methods to enable the rapid thermal evaluation of advanced insulation materials. This paper presents the study results and potential techniques for fast, accurate, and reliable effective thermal resistivity measurement on small samples of insulation materials.

Desjarlais, Andre Omer↗

Development and Performance Evaluation of of Active Insulation Systems using Solid-State Thermal Switches

Traditional building envelopes have passive insulation systems that cannot respond to dynamic changes in the environment. An Active Insulation System (AIS) consists of Active Insulation Materials (AIMs), which dynamically vary the thermal conductivity of the insulation system. Several researchers have evaluated the impact of AIS on building thermal and energy performance by using simulation tools. Up to 70% savings in annual heating and cooling energy and significant reductions in peak demand have been predicted for some climates with wall systems employing AIS. Sensitivity studies have provided requirements for the AIS properties and control schemes that can lead to those savings. However, materials and assembly development have not yet achieved a cost-effective product that achieves the required performance. In this study, we present the process to develop an AIS that we will install in a test hut for their performance evaluation. Minimum performance criteria of the AIS system are developed based on Rmin/Rmax ratio, required time and efficiency to switch states and cost estimate. The next step carried out during this study is creating the concept to meet the requirements, predicting the performance by simulations, developing the experimental setup for bench-scale testing, and finally, constructing a full-scale wall assembly and monitoring the performance when exposed to natural weather conditions. The selected approach uses off-the-shelf products to create a materials system that can switch R-value between R~=1 ft2·°F·h/BTU (0.18 m2·K/W) and R~=7 ft2·°F·h/BTU (1.23 m2·K/W and have a switching time of less than one minute between R-high and R-low.

Iffa, Emishaw↗