Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ion coordination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Average hydrodynamic radius analysis reveals critical solvation thresholds in high-concentration lithium electrolytes

Understanding the solvation structures of lithium salts in carbonate- and ether-based electrolytes is central to explaining the exceptional stability of high-concentration electrolytes (HCEs) and localized high-concentration electrolytes (LHCEs). Conventional techniques such as vibrational spectroscopy and one-dimensional NMR provide only limited information, typically restricted to coordination ratios and ion-pair distributions, without revealing the actual size and mass of solution complexes. Here, in this study, we introduce an average hydrodynamic radius (AHR) analysis based on internally referenced DOSY NMR, which enables direct estimation of the average volume and molecular weight of lithium–solvent complexes in solution. Using LiFSI–EMC and LiFSI–EMC–TTE electrolytes, we demonstrate that the onset of effective lithium metal stabilization and aluminum corrosion suppression coincides with the formation of very large complexes, whose average volume exceeds 300 times that of free EMC molecules. This finding supports a new “blocking mechanism,” wherein bulky solvated complexes impede direct solvent access to reactive surfaces. The AHR analysis thus not only clarifies the fundamental origin of HCE and LHCE effectiveness, but also provides a broadly applicable experimental framework for probing complex solvation structures and guiding rational electrolyte design.

Concentrated electrolytes↗
DOE OSTI2022

Exploring the Origin of Anionic Redox Activity in Super Li-Rich Iron Oxide-Based High-Energy-Density Cathode Materials

Super alkali-rich materials (alkali:transition metal ratio of ≥2:1), such as Li 5 FeO 4 , exhibit the potential to realize anionic redox upon deep delithiation. Li 5 FeO 4 was shown to undergo reversible cycling between Li 4 FeO 3.5 and Li 3 FeO 3.5 with combined cation/anion redox, a remarkable capacity of 189 mAh/g, and no O 2 release. However, the impact of phase transformations on the reaction thermodynamics and the correlation between the structural changes and reaction reversibility remain unclear. In this study, we use first-principles calculations to examine the delithiation and (re)lithiation reactions of Li 5 FeO 4 . We show that the experimentally observed charge and discharge processes go through non-equilibrium pathways. Upon delithiation, the compound undergoes a phase transformation from Li 5 FeO 4 , with tetrahedrally coordinated (T d ) Fe ions, to a delithiated disordered rocksalt structure, with octahedral (O h ) Fe ions. Fe-ion migration has an asymmetric kinetic barrier that makes T d → O h migration facile, whereas the reverse process has a much larger barrier, explaining the difficulties in reaction reversibility. We further elucidate the transition metal and O redox sequences during the charge cycle and identify the complex electrochemistry associated with the dual participation of cationic redox (Fe 3+ /Fe 4+ ) and anionic redox (O 2– /O – /O o ). Armed with this knowledge, we conduct high-throughput screening of known alkali-rich transition metal oxides by evaluating their potential to enable reversible anionic redox, with multiple candidates proposed for further experimental trials. Furthermore, our work provides a useful guide for the further development of super alkali-rich anionic-redox-active electrodes for high-energy-density batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Transition Metal Dissolution in Lithium-Ion Cells: A Piece of the Puzzle

Static leaching tests were performed using the chemically delithiated positive electrode materials, LiFePO 4 , LiCoO 2 , LiMn 2 O 4 , LiNiO 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . Instead of the common electrolyte, which contains LiPF 6 , the solvent consisted of only ethylene carbonate (EC) and ethyl methyl carbonate (EMC), limiting the possible reactions to only those that depend on the solvent. The product liquids from these experiments showed that there were lithium-bearing species in common, such as Li(EC) + and Li(EMC) + . Interestingly, we found evidence of electrolyte degradation products in both the positive-and negative-ion mass spectral results. The positive-ion results showed that the products tended to coordinate to lithium. In conclusion, the negative-ion results showed that most of the products tended to complex with transition metals. It was difficult to discern which positive ion was associated with which negative ion.

25 ENERGY STORAGE↗
DOE OSTI2025

Dimolybdenum Paddlewheel Complexes with Cation Binding Sites as Electrolyte Additives to Manipulate the Solid-Electrolyte Interphase at Lithium Metal Anodes

The use of electrolyte additives at millimolar loadings to control the surface chemistry of lithium metal anodes (LMAs) is a leading strategy to improve lithium metal batteries and promote electrosynthetic reactions. Whereas previous studies employed either inorganic or organic additives, in this study, we report the first organometallic additive, Mo 2 (mea) 4 [1, mea = 2-(2-methoxyethoxy)acetate], a dimolybdenum paddlewheel complex that is stable under Li plating conditions and features cation binding sites in the second coordination sphere that promote reversible Li + coordination. Binding of Li + ions to 1 induces immobilization of cationically charged aggregates (or products thereof) into the solid electrolyte interphase (SEI), imparting multiple beneficial functions. The modified SEI was found to protect the LMA against parasitic side reactions, produce modest but measurable improvements to Li plating properties (e.g., overpotential, surface structure, and Coulombic efficiency), and improve interfacial charge transport properties. Furthermore, the most notable benefit to battery cycling performance appears in calendar aging tests, which show that the presence of the additive protects the LMA from parasitic side reactions that would otherwise decrease overall cell cycling efficiency over time. Collectively, these data disclose a tactic for designing electrolyte additives using principles of organometallic synthesis.

Additives↗
DOE OSTI2020

Rational Design and Synthesis of Hierarchical Porous Mn–N–C Nanoparticles with Atomically Dispersed MnNx Moieties for Highly Efficient Oxygen Reduction Reaction

Developing transition-metal excluding iron and cobalt–nitrogen–carbon (M–N–C) electrocatalysts for the oxygen reduction reaction (ORR) is critical to substantially promote the development of precious-metal-free metal–air batteries and fuel cells. In the work, Mn–N–C nanoparticles with atomically dispersed MnNx moieties were synthesized by pyrolyzing Mn-ion–dual-pyridine coordinated complex, which was obtained via a simple condensation reaction between 2,6-diamino-pyridine and 2,6-diacetyl-pyridine with MnCl 2 as the Mn source. The precursor features with a characteristic structure of dual-pyridine ligand, which possesses a strong coordinating capability for Mn 2+ , facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (MnN x ). Attributed to the highly active atomic MnN x sites, hierarchical pore structure, and high surface area of the Mn–N–C derived from the new precursor, it exhibits outstanding ORR performance in 0.1 M KOH with an almost direct four-electron reaction path and high selectivity of O 2 into H 2 O (low H2O2 production <3.5%). The half-wave potential of Mn–N–C is 0.88 V vs RHE, which is 20 mV higher than that of commercial Pt/C catalyst and reaches to the level of Fe–N–C catalyst obtained by the same method. Meanwhile, the feasibility of Mn–N–C for practical application is validated by its higher-performance power output in Zn–air battery with a maximum power density of 132 mW cm –2 compared to that of Pt/C (121 mW cm –2 ) using the same catalyst loading of 1.0 mg cm –2 . This work develops a convenient route to develop non-Fe or Co–N–C electrocatalyst for the ORR.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable and Cooperative Thermomechanical Properties of Protein-Metal-Organic Frameworks

We recently introduced protein-metal-organic frameworks (protein-MOFs) as chemically designed protein crystals, composed of ferritin nodes that predictably assemble into 3D lattices upon coordination of various metal ions and ditopic, hydrox-amate-based linkers. Owing to their unique tripartite construction, protein-MOFs possess extremely sparse lattice connectivi-ty, suggesting that they might display unusual thermomechanical properties. Leveraging the synthetic modularity of ferritin-MOFs, we investigated the temperature-dependent structural dynamics of six distinct frameworks. Our results show that the thermostabilities of ferritin-MOFs can be tuned through the metal component or the presence of crowding agents. Our stud-ies also reveal a framework that undergoes a reversible and isotropic first-order phase transition near-room temperature, corre-sponding to a 4% volumetric change within ≤1 deg C and a hysteresis window of ~10 deg C. Here, this highly cooperative crystal-to-crystal transformation, which stems from the soft crystallinity of ferritin-MOFs, illustrates the advantage of modular con-struction strategies in discovering tunable–and unpredictable–material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

An Atom-Precise Approach to Damp First-Order Phase Transitions and Its Implications for Neuromorphic Signal Processing

Neuromorphic computing inspired by mammalian intelligence aims to emulate the nonlinear dynamics of biological neurons and synapses to achieve fast, low-energy, and highly efficient information processing. Brain-inspired computing relies on the design and discovery of materials exhibiting nonlinear current–voltage profiles, frequently underpinned by electronic state transitions, to achieve spiking neurons and dynamically tunable synapses. A signature challenge in the design of artificial neurons is controlling the steepness of first-order transitions in active elements, as abrupt transitions are at risk of driving unstable voltage and temperature oscillations, which result in catastrophic device failure. A critical knowledge gap is the lack of structure–function correlations mapping the composition and atomistic structure of crystalline solids to nonlinear dynamical response characteristics. Here, we address the key question of how modification of atomistic structure correlates with alteration of neuron-like functionality. Constructing oscillator circuits from millimeter-scale single crystals enables high-resolution atomic structure solutions, which we use to demonstrate that the selective positioning of Pb cations modifies charge ordering along a one-dimensional CuxV2O5 framework even at low insertion stoichiometries, thereby providing an atom-precise design parameter for damping first-order transitions. We use temperature-variant X-ray diffraction and X-ray spectroscopy to elucidate the suppression of Cu-ion shuttling based on the precise positioning of Pb ions in seven-coordinated tunnel interstitial sites as the mechanistic basis for transition broadening, thus bridging a critical gap between statistical mechanics and quantum chemical descriptions of phase transitions. Such mechanistic understanding thus paves the way to site-selective modification strategies for modulating the sharpness of first-order transitions, with an exemplary demonstration here in tuning neuronal signal processing.

Crystal structure↗
DOE OSTI2023

Structural insights into functional properties of the oxidized form of cytochrome c oxidase

Abstract Cytochrome c oxidase (C c O) is an essential enzyme in mitochondrial and bacterial respiration. It catalyzes the four-electron reduction of molecular oxygen to water and harnesses the chemical energy to translocate four protons across biological membranes. The turnover of the C c O reaction involves an oxidative phase, in which the reduced enzyme (R) is oxidized to the metastable O H state, and a reductive phase, in which O H is reduced back to the R state. During each phase, two protons are translocated across the membrane. However, if O H is allowed to relax to the resting oxidized state (O), a redox equivalent to O H , its subsequent reduction to R is incapable of driving proton translocation. Here, with resonance Raman spectroscopy and serial femtosecond X-ray crystallography (SFX), we show that the heme a 3 iron and Cu B in the active site of the O state, like those in the O H state, are coordinated by a hydroxide ion and a water molecule, respectively. However, Y244, critical for the oxygen reduction chemistry, is in the neutral protonated form, which distinguishes O from O H , where Y244 is in the deprotonated tyrosinate form. These structural characteristics of O provide insights into the proton translocation mechanism of C c O.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ethylene oxide functionalization enhances the ionic conductivity of a MOF

Varying the degree of ethylene oxide (EO) functionalization of the zirconium MOF UiO-68 affords two novel MOFs; UiO-68-EO and UiO-68-2EO exhibit solvent-free ionic conductivity upon loading LiTFSI in their pores. Furthermore, incorporating EO chains provides a pathway for lithium ion migration between the coordinated sites and results in an ionic conductivity of 3.8 × 10 –7 S cm –1 and 3.9 × 10 –4 S cm –1 at 90 °C for UiO-68-EO/LiTFSI and UiO-68-2EO/LiTFSI respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronic reconstruction at the polar (111)-oriented oxide interface

Atomically flat (111) interfaces between insulating perovskite oxides provide a landscape for new electronic phenomena. For example, the graphene-like coordination between interfacial metallic ion layer pairs can lead to topologically protected states [Xiao et al., Nat. Commun. 2, 596 (2011) and A. Rüegg and G. A. Fiete, Phys. Rev. B 84, 201103 (2011)]. The metallic ion/metal oxide bilayers that comprise the unit cell of the perovskite (111) heterostructures require the interface to be polar, generating an intrinsic polar discontinuity [Chakhalian et al., Nat. Mater. 11, 92 (2012)]. Here, we investigate epitaxial heterostructures of (111)-oriented LaAlO 3 /SrTiO 3 (LAO/STO). We find that during heterostructure growth, the LAO overlayer eliminates the structural reconstruction of the STO (111) surface with an electronic reconstruction, which determines the properties of the resulting two-dimensional conducting gas. This is confirmed by transport measurements, direct determination of the structure and atomic charge from coherent Bragg rod analysis, and theoretical calculations of electronic and structural characteristics. Interfacial behaviors of the kind discussed here may lead to new growth control parameters useful for electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comparison of human poly-N-acetyl-lactosamine synthase structure with GT-A fold glycosyltransferases supports a modular assembly of catalytic subsites

Poly-N-acetyl-lactosamine (poly-LacNAc) structures are composed of repeating [-Galβ(1,4)-GlcNAcβ(1,3)-]n glycan extensions. They are found on both N- and O-glycoproteins and glycolipids and play an important role in development, immune function, and human disease. The majority of mammalian poly-LacNAc is synthesized by the alternating iterative action of β1,3-N-acetylglucosaminyltransferase 2 (B3GNT2) and β1,4-galactosyltransferases. B3GNT2 is in the largest mammalian glycosyltransferase family, GT31, but little is known about the structure, substrate recognition, or catalysis by family members. Here we report the structures of human B3GNT2 in complex with UDP:Mg 2+ and in complex with both UDP:Mg 2+ and a glycan acceptor, lacto-N-neotetraose. The B3GNT2 structure conserves the GT-A fold and the DxD motif that coordinates a Mg 2+ ion for binding the UDP-GlcNAc sugar donor. The acceptor complex shows interactions with only the terminal Galβ(1,4)-GlcNAcβ(1,3)- disaccharide unit, which likely explains the specificity for both N- and O-glycan acceptors. Modeling of the UDP-GlcNAc donor supports a direct displacement inverting catalytic mechanism. Comparative structural analysis indicates that nucleotide sugar donors for GT-A fold glycosyltransferases bind in similar positions and conformations without conserving interacting residues, even for enzymes that use the same donor substrate. In contrast, the B3GNT2 acceptor binding site is consistent with prior models suggesting that the evolution of acceptor specificity involves loops inserted into the stable GT-A fold. These observations support the hypothesis that GT-A fold glycosyltransferases employ coevolving donor, acceptor, and catalytic subsite modules as templates to achieve the complex diversity of glycan linkages in biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronic structure of the frustrated diamond lattice magnet NiRh 2 O 4

We report the A -site spinel NiRh 2 O 4 is the only known realization of a spin-1 diamond lattice magnet and is predicted to host unconventional magnetic phenomena driven by frustrated nearest and next-nearest neighbor exchange as well as orbital degeneracy. Previous works found no sign of magnetic order but found a gapped dispersive magnetic excitation indicating a possible valence bond magnetic ground state. However, the presence of many competing low energy degrees of freedom and limited empirical microscopic constraints complicates further analysis. Here we carry out resonant inelastic x-ray scattering (RIXS), x-ray absorption spectroscopy (XAS), and inelastic neutron scattering (INS) to characterize the local electronic structure and lattice dynamics of NiRh 2 O 4 . The RIXS data can be partly described by a single-ion model for tetrahedrally coordinated Ni 2+ and indicates a tetragonal distortion Δt 2 = 70 meV that splits the t 2 orbitals into a high energy orbital singlet and lower energy orbital doublet. We identify features of the RIXS spectra that are consistent with a Rh-Ni two-site excitation indicating strong metal-metal hybridization mediated by oxygen in NiRh 2 O 4 . We also identify signatures of electron-phonon coupling through the appearance of phonon sidebands that dress crystal field excitations. These results establish the key energy scales relevant to the magnetism in NiRh 2 O 4 and further demonstrate that covalency and lattice dynamics play essential roles in controlling the magnetic ground states of A -site spinels.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Production of Uranium from Seawater Using a Novel Polymer Adsorbent – Process Development and Cost Analysis (Final Scientific/Technical Report SBIR Phase II)

Research in developing techniques for extracting uranium from seawater is of considerable current interest. One reason which drives scientists to develop techniques of sequestering uranium from ocean is the prediction that the land-based uranium reserves would be depleted by the end of this century based on the current production rate. Uranium exists in seawater at a very low concentration (about 3 ppb) and as highly stable uranyl tris-carbonato complexes, primarily in the form Ca 2 [UO 2 (CO 3 ) 3 ]. Because of the enormous volume of seawater, the total amount of uranium in ocean is estimated to be a thousand times greater than the land-based uranium resources. As early as 1964, the idea of extracting uranium from seawater was discussed by Davies et al. in a Nature paper. In the past decades, many different materials were tested to evaluate their ability for sequestering uranium from seawater. Among them, amidoxime and carboxylate containing polymer fiber adsorbents appear most promising because of their high uranium adsorption capacity and stability in seawater. The carboxylate groups are necessary to make the polymer adsorbent hydrophilic whereas the amidoxime groups provide strong coordination sites for uranyl ions. Moreover, according to theoretical analysis, the adsorbability of uranium may involve synergistic effects of both amidoxime and carboxyl groups in the fiber adsorbent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1986

Spacecraft dielectric material properties and spacecraft charging

The physics of spacecraft charging is reviewed, and criteria for selecting and testing semiinsulating polymers (SIPs) to avoid charging are discussed and illustrated. Chapters are devoted to the required properties of dielectric materials, the charging process, discharge-pulse phenomena, design for minimum pulse size, design to prevent pulses, conduction in polymers, evaluation of SIPs that might prevent spacecraft charging, and the general response of dielectrics to space radiation. SIPs characterized include polyimides, fluorocarbons, thermoplastic polyesters, poly(alkanes), vinyl polymers and acrylates, polymers containing phthalocyanine, polyacene quinones, coordination polymers containing metal ions, conjugated-backbone polymers, and 'metallic' conducting polymers. Tables summarizing the results of SIP radiation tests (such as those performed for the NASA Galileo Project) are included.

Frederickson, A. R.↗
NASA NTRS2000

R6 Hexameric Insulin Complexed with m-Cresol or Rescorcinol

The structures of three R6 human insulin hexamers have been determined. Crystals of monoclinic m-cresol/insulin, monoclinic resorcinol/insulin, and rhombohedral m-cresol/insulin crystals diffracted to 1.9, 1.9 and 1,78 Angstroms, respectively, and have been refined to residuals of 0.195, 0.179, and 0.200, respectively. In all three structures, a phenolic derivative is found to occupy the phenolic binding site where it forms hydrogen bonds to the carbonyl oxygen of A6 Cys and the nitrogen of A11 Cys. Two additional phenolic derivative binding sites were identified within or between hexamers. The structures of all three hexamers are nearly identical although a large displacement of the N-terminus of one B-chain in both monoclinic structures results from coordination to a sodium ion which is located between symmetry related hexamers. Other minor differences in structure are a consequence of differences in packing in the monoclinic cell as compared to the rhombohedral cell. Based upon the differences in conformation of the B13 Glu side chains in T6, T3R3, and R6 hexamers, the deprotonation of these side chains appears to be associated with the T (right arrow) R conformational transition.

Smith, G. David↗
DOE OSTI2025

Influences of Alkali Metal Cation Interactions on N2 Coordination to Iron(I) Beta-Diketiminate Complexes in Electrolyte Solutions

N2 functionalization reactions often use stable, isolable N2-bound complexes and low temperatures or highly activated reagents. However, little work has focused on systems where N2 binds weakly, and the N2 binding equilibrium can be modulated. Here, we describe analysis of surprising trends in alkali metal cation solvation on the formation of an anionic iron(I) beta-diketiminate complex and the subsequent N2 binding equilibrium. Variable temperature UV-vis spectroscopy shows that increased ionic strength in the coordinating solvent tetrahydrofuran promotes N2 coordination. Additionally, less solvated alkali metal cations in noncoordinating 2-methyltetrahydrofuran (MeTHF) stabilize N2 coordination, likely through the formation of contact ion pairs in solution that have enhanced N2 binding. Ionic strength has little effect on the energetics of N2 coordination to these proposed contact ion pairs in MeTHF. When the electrochemical analysis is done at –78 °C, there is an irreversible reduction of iron(II) and an anodically shifted oxidation, which is attributed to the formation of the spectroscopically observed N2 complex. Finally, bulk electrolysis is used to verify the electrochemical formation of the N2-bound anionic iron(I) complex. These studies demonstrate a new strategy for promoting N2 coordination by changing solution properties, which is relevant to homogeneous electrochemical N2 reduction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Histidine‐Mediated Ion Specific Effects Enable Salt Tolerance of a Pore‐Forming Marine Antimicrobial Peptide

Abstract Antimicrobial peptides (AMPs) preferentially permeate prokaryotic membranes via electrostatic binding and membrane remodeling. Such action is drastically suppressed by high salt due to increased electrostatic screening, thus it is puzzling how marine AMPs can possibly work. We examine as a model system, piscidin‐1, a histidine‐rich marine AMP, and show that ion‐histidine interactions play unanticipated roles in membrane remodeling at high salt: Histidines can simultaneously hydrogen‐bond to a phosphate and coordinate with an alkali metal ion to neutralize phosphate charge, thereby facilitating multidentate bonds to lipid headgroups in order to generate saddle‐splay curvature, a prerequisite to pore formation. A comparison among Na + , K + , and Cs + indicates that histidine‐mediated salt tolerance is ion specific. We conclude that histidine plays a unique role in enabling protein/peptide‐membrane interactions that occur in marine or other high‐salt environment.

Xian, Wujing↗