Search NASA⌕ Search

SEARCH · Search NASA

Results for “Jet Noise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

The Role of Instability Waves in Predicting Jet Noise

Debate over whether linear instability waves play a role in the prediction of jet noise has been going on for many years. Parallel mean flow models, such as the one proposed by Lilley, usually neglect these waves because they cause the solution to become infinite. The present paper solves the true non-parallel acoustic equations for a two-dimensional shear layer by using a vector Greens function and assuming small mean flow spread rate. The results show that linear instability waves must be accounted for in order to construct a proper causal solution to the problem.

Goldstein, Marvin E.↗
NASA NTRS1974

Fluid dynamic aspects of jet noise generation

The location of the noise sources within jet flows, their relative importance to the overall radiated field, and the mechanisms by which noise generation occurs, are studied by detailed measurements of the level and spectral composition of the radiated sound in the far field. Directional microphones are used to isolate the contribution to the radiated sound of small regions of the flow, and for cross-correlation between the radiated acoustic field and either the velocity fluctuations or the pressure fluctuations in the source field. Acquired data demonstrate the supersonic convection of the acoustic field and the resulting limited upstream influence of the signal source, as well as a possible increase of signal strength as it propagates toward the centerline of the flow.

Source record↗
NASA NTRS1982

Supersonic jet noise generated by large scale instabilities

The role of large scale wavelike structures as the major mechanism for supersonic jet noise emission is examined. With the use of aerodynamic and acoustic data for low Reynolds number, supersonic jets at and below 70 thousand comparisons are made with flow fluctuation and acoustic measurements in high Reynolds number, supersonic jets. These comparisons show that a similar physical mechanism governs the generation of sound emitted in he principal noise direction. These experimental data are further compared with a linear instability theory whose prediction for the axial location of peak wave amplitude agrees satisfactorily with measured phased averaged flow fluctuation data in the low Reynolds number jets. The agreement between theory and experiment in the high Reynolds number flow differs as to the axial location for peak flow fluctuations and predicts an apparent origin for sound emission far upstream of the measured acoustic data.

Seiner, J. M.↗
NASA NTRS1993

Computation of supersonic jet noise under imperfectly expanded conditions

The turbulent mixing noise of supersonic jet under imperfectly expanded conditions is calculated for convergent and convergent-divergent (CD) axisymmetric nozzle geometries. The noise prediction incorporates CFD solution of Navier-Stokes equations. The effect of grid resolution on shock structure computation is demonstrated. Mixing noise spectra predicted from fine and coarse grid solutions exhibit little sensitivity to the grid resolution. A proper grid resolution, however, results in a significant improvement in shock capturing capability and helps predictions agree favorably with experimental data. Good agreement between predicted noise spectra and data shows that the CFD-incorporated noise prediction scheme, which was demonstrated for shock-free conditions, works as well for shock-containing flow conditions.

Kim, Chan M.↗
NASA NTRS1993

Computation of supersonic jet noise under imperfectly expanded conditions

The turbulent mixing noise of supersonic jet under imperfectly expanded conditions is calculated for convergent and convergent-divergent (CD) axisymmetric nozzle geometries. The noise prediction incorporates CFD solution of Navier-Stokes equations. The effect of grid resolution on shock structure computation is demonstrated. Mixing noise spectra predicted from fine and coarse grid solutions exhibit little sensitivity to the grid resolution. A proper grid resolution, however, results in a significant improvement in shock capturing capability and helps predictions agree favorably with experimental data. Good agreement between predicted noise spectra and data shows that the CFD-incorporated noise prediction scheme, which was demonstrated for shock-free conditions, works as well for shock-containing flow conditions.

Kim, Chan M.↗
NASA NTRS1996

Jet Noise Using Large Eddy Simulation

With the advent of high-supersonic transport aircraft, supersonic jet noise becomes a major technological problem and there is a strong need for a reliable prediction approach. Our present interest is the mixing noise component induced by the turbulent flow itself. The physics of shock-associated noise is very different and must be treated in another context.

Bastin, F.↗
NASA NTRS2007

Predicting Rocket or Jet Noise in Real Time

A semi-empirical theoretical model and a C++ computer program that implements the model have been developed for use in predicting the noise generated by a rocket or jet engine. The computer program, entitled the Realtime Rocket and Jet Engine Noise Analysis and Prediction Software, is one of two main subsystems of the Acoustic Prediction/Measurement Tool, which comprises software, acoustic instrumentation, and electronic hardware combined to afford integrated capabilities for real-time prediction and measurement of noise emitted by rocket and jet engines. [The other main subsystem, consisting largely of acoustic instrumentation and electronic hardware, is described in Wireless Acoustic Measurement System, which appears elsewhere in this section.] The theoretical model was derived from the fundamental laws of fluid mechanics, as first was done by M. J. Lighthill in his now famous theory of aerodynamically generated sound. The far-field approximation of the Lighthill theory is incorporated into this model. Many other contributions from various researchers have also been introduced into the model. The model accounts for two noise components: shear noise and self noise. The final result of the model is expressed in terms of a volume integral of the acoustic intensities attributable to these two components, subject to various directivity coefficients. The computer program was written to solve the volume integral. The inputs required by the program are two data files from a computational fluid dynamics (CFD) simulation of the flow of interest: the computational-grid file and the solution file. The CFD solution should be one that has been obtained for conditions that closely approximate those of an experimental test that is yet to be performed. In the current state of development of the model and software, it is recommended that the observation points lie along a radius at an angle >60 from the jet axis. The software provides, and is driven via, a graphical user interface, which facilitates its use. Optionally, the program accepts additional input in the form of data on the measured sound pressure level as a function of frequency at a given far-field location, preferably at an angle of 90 from the jet axis. The user is prompted to use default empirical constants or to choose constants based the measurement data. The user can view the results and compare them with other computational or experimental data. Once satisfied with the results, the user can save a graph of the results in a file that can be imported into documents.

Frendi, Kader↗
NASA NTRS1979

Effects of geometric and flow-field variables on inverted-velocity-profile coaxial jet noise and source distributions

This paper presents relationships between the noise generation characteristics and the flow-field characteristics for inverted-velocity-profile coaxial jets. Noise measurements were made at four different sideline distances in order to determine the apparent noise source locations, and flow-field characteristics were determined from jet plume pressure/temperature surveys. These relationships are based on a published NASA Lewis prediction model, the basic assumptions of which are shown to be consistent with the experimental data reported herein. Improvements to the noise prediction procedure, on the basis of the present study, are included, which increase the accuracy of the high-frequency noise prediction.

Stone, J. R.↗
NASA NTRS1979

Twin jet noise shielding for a supersonic cruise vehicle

An engine arrangement for a supersonic cruise vehicle (SCV) has been developed that shows promise for jet noise reduction without the performance penalties associated with mechanical suppressors and engine oversizing. This arrangement, wherein two engines are placed on top of the wing directly above two similarly-mounted engines below the wing, can produce 3 to 5 dB less noise below the aircraft flight path than when four engines are installed under the wing. This noise reduction is due to acoustic shielding of the upper jets by the lower jets. Test data are reviewed to verify this acoustical shielding phenomenon, and detailed takeoff trajectories are calculated to show the effects of sideline and flyover noise levels on constraining maximum range SCV configurations. Engine placement variation and differential throttling, wherein thrust is unloaded from the lower engine and added to the upper engine, are to be explored as means for maximizing the shielding effect.

Clauss, J. S., Jr.↗
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations of Jet Noise in Flight Conditions

A campaign of wall-modeled large-eddy simulations (WMLES) using structured curvilinear overlapping grids has been performed with the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) software to predict jet noise for single-stream axisymmetric round jets. The simulations address the new Prediction Uncertainty Reduction (PUR) technical challenge within the context of NASA’s Commercial Supersonic Technology (CST) project. The focus of this effort is to generate a simulation database for single-stream axisymmetric round nozzles at several operating points both for static (no ambient co-flow), and in-flight (M ͚ =0.3 co-flow) conditions. The operating conditions range in jet exit Mach number from 0.38 to 1.1 with nozzle temperature ratios (NTR) from 0.84 to 2.7. The effect of the flight-stream on far-field noise sound spectra is assessed. Comparison of LES predictions to microphone array measurements demonstrate good agreement within the resolved frequency range. A dip in the predicted low frequency noise spectra for observers between 120° and 145° is observed. This dip is smaller for lower Mach numbers and seems to be correlated to the Mach wave radiation angle. The Mach 1.1 jet shows broadband-shock associated noise. While the onset of BBSN appears to be captured correctly in WMLES, some differences in its magnitude and the prominent frequency at which it occurs persist between the experiment and the simulations. The effect of the outer nozzle boundary layer state created by the co-flow is assessed and shows to be important for accurate comparisons with experiments. A change of 2.5dB between a slip-wall condition and a artificially thickened turbulent boundary layer was observed. In addition, simulations were performed with an alternative nozzle geometry that includes a internal plug and has twice the nozzle exit diameter. These two configurations resulted in very comparable spectra which is consistent with experimental observations. A generally stronger deviation from experimental results is observed for in-flight cases compared to static conditions. The applicability and correct usage of acoustic analogies used for far-field propagation with strong turbulent co-flows needs to be investigated more systematically using canonical problems to improve comparisons between experiments and WMLES. This is especially true for coherent noise sources seen in BBSN.

CST↗
NASA NTRS1978

A ring-source model for jet noise

A model consisting of two ring sources was developed to study the direct radiation of jet noise in terms of correlation, coherence, and phase and also to aid in solving the inverse radiation problem of determining the noise source in terms of far-field measurements. The rings consist of discrete sources which are either monopoles or quadrupoles with Gaussian profiles. Only adjacent sources, both within the rings and between rings, are correlated. Results show that from the far-field information can be used to determine when the sources are compact or noncompact with respect to the acoustic wavelength and to distinguish between the types of sources. In addition, from the inverse radiation approach, the center of mass, the location and separation distance of the ring, and the diameters can be recovered.

Maestrello, L.↗
NASA NTRS1977

Effect of flight on jet noise from supersonic underexpanded flows

Experiments on underexpanded cold jet flows from a convergent nozzle under simulated flight conditions have shown that a large periodic spinning motion of the jet can occur with greatly enhanced broadband noise production. Shadowgraph pictures indicate that this oscillatory jet motion accompanies the generation of random weak shock waves at the source. These waves appear to be generated at the point downstream of the nozzle exit where the shock cells in the jet begin to disappear. The weak shock waves propagate upstream and have been identified to be the cause of enhanced broadband jet noise production in flight. In addition, the results show that the boundary layer flow conditions over the outside of the primary nozzle (simulating engine cowl flow in flight) have a key role in the production of these random weak shock waves.

Sarohia, V.↗
NASA NTRS1990

An evaluation of various concepts of reducing supersonic jet noise

Acoustic and flow visualization data from nozzles mounted on the same facility were acquired, and a total of 10 different concepts of jet noise suppression were evaluated relative to one another and also a round nozzle. All nozzles had the same exit area. The suppressors included noncircular shapes; nozzles fitted with notches, tabs, and ejectors; and coaxial rectangular nozzles. Narrow-band noise data were acquired by a microphone located in the plane of the jet exit. In general, it is found that, for a constant exit area, the round nozzle is the noisiest. Just about any modification of this round nozzle around its periphery reduces the broadband shock-associated noise and, in most instances, modifies the screech frequency and levels. Coaxial rectangular nozzles, nozzles fitted with two tabs and operated with ejectors, and a rectangular C-D nozzles with perforated walls are identified to be the most promising concepts worthy of further investigation.

Ahuja, K. K.↗
NASA NTRS1974

Ordered structures and jet noise

A series of measurements of near field pressures and turbulent velocity fluctuations were made in a jet having a Reynolds number of about 50,000 in order to investigate more quantitatively the character and behavior of the large scale structures, and to ascertain their importance to the jet noise problem. It was found that the process of interaction between vortices can be inhibited by artificially exciting the shear layers with periodic disturbances of certain frequency. The turbulent fluctuation amplitudes measured at four diameters downstream decreased considerably. Finally, it was observed that the passage frequency of the structures decreased with x in a similar manner as the frequency corresponding to the maximum intensity radiation emanating from the same value of x.

Petersen, R. A.↗
NASA NTRS1975

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02-cm diameter nozzle with microphones at several heights and distances from the nozzle axis. Ground reflection effects are analyzed using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. The selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects is also discussed.

Miles, J. H.↗
NASA NTRS1975

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02 cm (13-in.) diameter nozzle with microphones at several heights and distances from the nozzle axis. Analysis of ground reflection effects is accomplished using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. Also discussed is the selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects.

Miles, J. H.↗