Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Concerted Rattling in CsAg 5 Te 3 Leading to Ultralow Thermal Conductivity and High Thermoelectric Performance

Abstract Thermoelectric (TE) materials convert heat energy directly into electricity, and introducing new materials with high conversion efficiency is a great challenge because of the rare combination of interdependent electrical and thermal transport properties required to be present in a single material. The TE efficiency is defined by the figure of merit ZT =( S 2 σ ) T / κ , where S is the Seebeck coefficient, σ is the electrical conductivity, κ is the total thermal conductivity, and T is the absolute temperature. A new p‐type thermoelectric material, CsAg 5 Te 3 , is presented that exhibits ultralow lattice thermal conductivity (ca. 0.18 Wm −1 K −1 ) and a high figure of merit of about 1.5 at 727 K. The lattice thermal conductivity is the lowest among state‐of‐the‐art thermoelectrics; it is attributed to a previously unrecognized phonon scattering mechanism that involves the concerted rattling of a group of Ag ions that strongly raises the Grüneisen parameters of the material.

Lin, Hua↗
DOE OSTI2023

Synthesis and Characterization of a New Ferroelectric with Low Lead Content, a High Curie Temperature, and a High Piezoelectric Response

Abstract A new solid solution (1− x )Bi(Fe 2/8 Ti 3/8 Mg 3/8 )O 3 –( x )PbTiO 3 (BFTM‐PT) is synthesized and the electromechanical properties are measured. This system is defined as a low‐lead material with ferroelectric/piezoelectric behavior and a morphotropic phase boundary (MPB) that leads to enhanced properties. The MPB is located between x = 0.30 and 0.35 and coincides with a structural phase transition and a sharp increase in the piezoelectric response. The system demonstrates ferroelectric hysteresis where x = 0.325 displays the best properties with a maximum polarization of 39 µC cm −2 and a remnant polarization of 26 µC cm −2 . The range of compositions has high Curie temperature ( T c ), ranging from 625–650 °C. Materials with a T c above 400 °C typically have a low d 33 of <50 pC N −1 at room temperature. However, BFTM‐PT has a higher d 33 that most other compositions with a T c in this range, with the highest being 145 pC N −1 for x = 0.375. The d 33 drops off above 100 °C, but doping studies can be done in the future to stabilize the piezoelectric response at higher temperatures. These outstanding properties open the possibility of new transducer applications, in particular ones requiring high temperature and high power.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic urban land extensification is projected to lead to imbalances in the global land-carbon equilibrium

Abstract Human-Earth System Models and Integrated Assessment Models used to explore the land-atmosphere implications of future land-use transitions generally lack dynamic representation of urban lands. Here, we conduct an experiment incorporating dynamic urbanization in a multisector model framework. We integrate projected dynamic non-urban lands from a multisector model with projected dynamic urban lands from 2015 to 2100 at 1-km resolution to examine 1 st -order implications to the land system, crop production, and net primary production that can arise from the competition over land resources. By 2100, future urban extensification could displace 0.1 to 1.4 million km 2 of agriculture lands, leading to 22 to 310 Mt of compromised corn, rice, soybean, and wheat production. When considering increased corn production required to meet demands by 2100, urban extensification could cut increases in yields by half. Losses in net primary production from displaced forest, grassland, and croplands ranged from 0.24 to 2.24 Gt C yr −1 , potentially increasing land emissions by 1.19 to 6.59 Gt CO 2 yr −1 . Although these estimates do not consider adaptive responses, 1 st -order experiments can elucidate the individual role of sub-sectors that would otherwise be masked by model complexity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Annealing-induced microstructural evolution and mechanical anisotropy improvement of the Mg-Gd-Y-Zr alloy processed by hot ring rolling

Highlights: • Growth of SRX grains in GBR is random, while that of TBR is anisotropic. • The new texture component in annealed MR weakens the anisotropy obviously. • T6 treatment leads to an excellent comprehensive mechanical property. - Abstract: Hot ring rolling (HRR) is widely used to fabricate large-size seamless ring-shape components. However, this process produces a severe mechanical anisotropy, which is not acceptable in practical industrial application and should be avoided. This paper reports the annealing-induced microstructural evolution and mechanical anisotropy improvement of HRRed Mg-8.12Gd-1.82Y-0.35Zr alloy ring. Results show that annealing treatment could improve the microstructural homogeneity of the ring owing to the occurrence of static recrystallization (SRX). SRX grains are preferentially formed at twin boundaries and initial grain boundaries due to high dislocation density, high level of stored energy, and stress concentration. Twin boundaries, to some extent, can suppress the migration of SRX grain boundaries. In addition, occurrence of SRX weakens the texture intensity and basal pole inclination, leading to a decrease in the mechanical anisotropy of the ring. Considering the weakened anisotropy, comparable strength, and improved ductility, annealing + aging (T6), compared with direct aging (T5), is a more suitable heat treatment schedule for the HRRed Mg-8.12Gd-1.82Y-0.35Zr alloy ring.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Severe Convective Storms in Limited Instability Organized by Pattern and Distribution

Abstract Severe convection occurring in high-shear, low-CAPE (HSLC) environments is a common cool-season threat in the southeastern United States. Previous studies of HSLC convection document the increased operational challenges that these environments present compared to their high-CAPE counterparts, corresponding to higher false-alarm ratios and lower probability of detection for severe watches and warnings. These environments can exhibit rapid destabilization in the hours prior to convection, sometimes associated with the release of potential instability. Here, we use self-organizing maps (SOMs) to objectively identify environmental patterns accompanying HSLC cool-season severe events and associate them with variations in severe weather frequency and distribution. Large-scale patterns exhibit modest variation within the HSLC subclass, featuring strong surface cyclones accompanied by vigorous upper-tropospheric troughs and northward-extending regions of instability, consistent with prior studies. In most patterns, severe weather occurs immediately ahead of a cold front. Other convective ingredients, such as lower-tropospheric vertical wind shear, near-surface equivalent potential temperature (θ e ) advection, and the release of potential instability, varied more significantly across patterns. No single variable used to train SOMs consistently demonstrated differences in the distribution of severe weather occurrence across patterns. Comparison of SOMs based on upper and lower quartiles of severe occurrence demonstrated that the release of potential instability was most consistently associated with higher-impact events in comparison to other convective ingredients. Overall, we find that previously developed HSLC composite parameters reasonably identify high-impact HSLC events. Significance Statement Even when atmospheric instability is not optimal for severe convective storms, in some situations they can still occur, presenting increased challenges to forecasters. These marginal environments may occur at night or during the cool season, when people are less attuned to severe weather threats. Here, we use a sorting algorithm to classify different weather patterns accompanying such storms, and we distinguish which specific patterns and weather system features are most strongly associated with severe storms. Our goals are to increase situational awareness for forecasters and to improve understanding of the processes leading to severe convection in marginal environments.

Meteorology & Atmospheric Sciences↗
DOE OSTI2019

Materials Discovery of Stable and Nontoxic Halide Perovskite Materials for High‐Efficiency Solar Cells

Abstract Two critical limitations of organic–inorganic lead halide perovskite materials for solar cells are their poor stability in humid environments and inclusion of toxic lead. In this study, high‐throughput density functional theory (DFT) methods are used to computationally model and screen 1845 halide perovskites in search of new materials without these limitations that are promising for solar cell applications. This study focuses on finding materials that are comprised of nontoxic elements, stable in a humid operating environment, and have an optimal bandgap for one of single junction, tandem Si‐perovskite, or quantum dot–based solar cells. Single junction materials are also screened on predicted single junction photovoltaic (PV) efficiencies exceeding 22.7%, which is the current highest reported PV efficiency for halide perovskites. Generally, these methods qualitatively reproduce the properties of known promising nontoxic halide perovskites that are either experimentally evaluated or predicted from theory. From a set of 1845 materials, 15 materials pass all screening criteria for single junction cell applications, 13 of which are not previously investigated, such as (CH 3 NH 3 ) 0.75 Cs 0.25 SnI 3 , ((NH 2 ) 2 CH)Ag 0.5 Sb 0.5 Br 3 , CsMn 0.875 Fe 0.125 I 3 , ((CH 3 ) 2 NH 2 )Ag 0.5 Bi 0.5 I 3 , and ((NH 2 ) 2 CH) 0.5 Rb 0.5 SnI 3 . These materials, together with others predicted in this study, may be promising candidate materials for stable, highly efficient, and nontoxic perovskite‐based solar cells.

Jacobs, Ryan↗
DOE OSTI2019

Dodecaborane‐Based Dopants Designed to Shield Anion Electrostatics Lead to Increased Carrier Mobility in a Doped Conjugated Polymer

Abstract One of the most effective ways to tune the electronic properties of conjugated polymers is to dope them with small‐molecule oxidizing agents, creating holes on the polymer and molecular anions. Undesirably, strong electrostatic attraction from the anions of most dopants localizes the holes created on the polymer, reducing their mobility. Here, a new strategy utilizing a substituted boron cluster as a molecular dopant for conjugated polymers is employed. By designing the cluster to have a high redox potential and steric protection of the core‐localized electron density, highly delocalized polarons with mobilities equivalent to films doped with no anions present are obtained. AC Hall effect measurements show that P3HT films doped with these boron clusters have conductivities and polaron mobilities roughly an order of magnitude higher than films doped with F 4 TCNQ, even though the boron‐cluster‐doped films have poor crystallinity. Moreover, the number of free carriers approximately matches the number of boron clusters, yielding a doping efficiency of ≈100%. These results suggest that shielding the polaron from the anion is a critically important aspect for producing high carrier mobility, and that the high polymer crystallinity required with dopants such as F 4 TCNQ is primarily to keep the counterions far from the polymer backbone.

Aubry, Taylor J.↗
DOE OSTI2023

Synthesis of Zwitterionic CsPbBr 3 Nanocrystals with Controlled Anisotropy using Surface‐Selective Ligand Pairs

Abstract Mechanistic studies of the morphology of lead halide perovskite nanocrystals (LHP‐NCs) are hampered by a lack of generalizable suitable synthetic strategies and ligand systems. Here, the synthesis of zwitterionic CsPbBr 3 NCs is presented with controlled anisotropy using a proposed “surface‐selective ligand pairs” strategy. Such a strategy provides a platform to systematically study the binding affinity of capping ligand pairs and the resulting LHP morphologies. By using zwitterionic ligands (ZwL) with varying structures, majority ZwL‐capped LHP NCs with controlled morphology are obtained, including anisotropic nanoplatelets and nanorods, for the first time. Combining experiments with density functional theory calculations, factors that govern the ligand binding on the different surface facets of LHP‐NCs are revealed, including the steric bulkiness of the ligand, the number of binding sites, and the charge distance between binding moieties. This study provides guidance for the further exploration of anisotropic LHP‐NCs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of the built, social, and food environment on long‐term weight loss within a behavioral weight loss intervention

Abstract Background Behavioral weight loss interventions can lead to an average weight loss of 5%–10% of initial body weight, however there is wide individual variability in treatment response. Although built, social, and community food environments can have potential direct and indirect influences on body weight (through their influence on physical activity and energy intake), these environmental factors are rarely considered as predictors of variation in weight loss. Objective Evaluate the association between built, social, and community food environments and changes in weight, moderate‐to‐vigorous physical activity (MVPA), and dietary intake among adults who completed an 18‐month behavioral weight loss intervention. Methods Participants included 93 adults (mean ± SD; 41.5 ± 8.3 years, 34.4 ± 4.2 kg/m 2 , 82% female, 75% white). Environmental variables included urbanicity, walkability, crime, Neighborhood Deprivation Index (includes 13 social economic status factors), and density of convenience stores, grocery stores, and limited‐service restaurants at the tract level. Linear regressions examined associations between environment and changes in body weight, waist circumference (WC), MVPA (SenseWear device), and dietary intake (3‐day diet records) from baseline to 18 months. Results Grocery store density was inversely associated with change in weight ( β = −0.95; p = 0.02; R 2 = 0.062) and WC ( β = −1.23; p < 0.01; R 2 = 0.109). Participants living in tracts with lower walkability demonstrated lower baseline MVPA and greater increases in MVPA versus participants with higher walkability (interaction p = 0.03). Participants living in tracts with the most deprivation demonstrated greater increases in average daily steps ( β = 2048.27; p = 0.02; R 2 = 0.039) versus participants with the least deprivation. Limited‐service restaurant density was associated with change in % protein intake ( β = 0.39; p = 0.046; R 2 = 0.051). Conclusion Environmental factors accounted for some of the variability (<11%) in response to a behavioral weight loss intervention. Grocery store density was positively associated with weight loss at 18 months. Additional studies and/or pooled analyses, encompassing greater environmental variation, are required to further evaluate whether environment contributes to weight loss variability.

Tewahade, Selam↗
DOE OSTI2016

Novel Co{sub 3}O{sub 4} porous polyhedrons derived from metal–organic framework toward high performance for electrochemical energy devices

Co{sub 3}O{sub 4} polyhedrons with porous structure have been synthesized simply by annealing Prussian blue analogue (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons at 400 °C in air. The product was characterized by a series of techniques, such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), High-resolution TEM (HRTEM), X-ray Photoelectron Spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) gas adsorption. Interestingly, when evaluated as an anode material for lithium-ion batteries (LIBs), the Co{sub 3}O{sub 4} porous polyhedrons manifested high reversible capacity (about 1200 mAh g{sup −1} at 50 mA g{sup −1}) and excellent cycling performance. Moreover, they also exhibited a high specific capacitance of 110 Fg{sup −1} when used as an electrode in the supercapacitor. It is suggested that the special morphology and porous nanostructure lead to the promising electrochemical properties. - Graphical abstract: Novel and complicated mesoporous architectures of Co{sub 3}O{sub 4} have been fabricated by thermal decomposition of Prussian Blue Analog (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons which obtained at the room temperature. When Co{sub 3}O{sub 4} product was evaluated for Li-ion batteries (LIBs), they exhibited high reversible capacity of 1000 mAh g{sup −1} with excellent cycle life because of the hollow/porous structure. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Direct measurements of channel specific rate constants in OH + C 3 H 8 illuminates prompt dissociations of propyl radicals

OH + molecules are an important class of reactions in combustion and atmospheric chemistry. Consequently, numerous studies have measured rate constants for these processes over an extended temperature range. A large majority of these experimental studies have utilized the decay of [OH] profiles (monitored either by absorption or laser-induced fluorescence) to obtain total rate constants. However, there are limited direct measurements of channel specific rate constants in this important class of reactions, particularly at combustion relevant temperatures. In the present experiments, we have directly measured site-specific rate constants for abstraction of the secondary C–H bond in OH + C 3 H 8 at high temperatures. Atomic resonance absorption spectrometry (ARAS) was used to monitor the formation of H-atoms from shock-heated mixtures of tert-butylhydroperoxide and C 3 H 8 at high temperatures. Simulations for the experimental H-atom profiles are sensitive only to abstraction of the secondary C–H bond leading to unambiguous measurements of the rate constants for this reaction. Over the T-range, 921 K < T < 1146 K, rate constants from the present experiments for OH + C 3 H 8 →H 2 O + i-C 3 H 7 can be represented by the Arrhenius expression, k = (3.935 ± 1.387) × 10-11 exp(-1681 ± 362 K/T )cm 3 molecule -1 s -1 Simulations of the lower temperature data (T < 1000 K) indicate that the H-atom profiles are also influenced to a minor extent by the thermal dissociation of iso-propyl, i-C 3 H 7 →H + C 3 H 6 , at short time-scales.

Shock Tube, H-ARAS, Prompt Dissociation, Bimolecul↗