SEARCH · Search NASA

Results for “LINEAR ARRAY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Map accuracy requirements: The cartographic potential of satellite image data

Cartographic products fall into a variety of classes: topographic maps that are concerned with planimetric information and elevations or heights; thematic maps, which might be used for geology, vegetation, water, or to display these subjects; digital elevation maps that would be produced from digital terrain data; and finally image maps. In terms of satellite applications, thematic maps and image maps are emphasized. The objectives are to consider, first, if resolution will be adequate for the identification of control and for the compilation of map products. Then, second, to define map accuracy standards and to determine the potential for meeting these standards with image data from the film camera, scanner and linear array systems of the 1980s.

Welch, R.↗

NASA NTRS1982

A concept for a future ground control data set for image correction

Strips of ground control can be established with current and future satellite sensors. These can provide precise and reliable geometric references for locating and correcting satellite image data and to support temporal image registration. This paper briefly describes the concept and approach for implementing this data base called a Ground Control Strip, and recommends additional work. The advent of new solid state imaging systems, in particular the linear array detectors (pushbroom sensors), make this new concept particularly attractive and practical.

Bernstein, R.↗

NASA NTRS1982

On the power output of some idealized source configurations with one or more characteristic dimensions

The calculation of power output from a (finite) linear array of equidistant point sources is investigated with allowance for a relative phase shift and particular focus on the circumstances of small/large individual source separation. A key role is played by the estimates found for a twin parameter definite integral that involves the Fejer kernel functions, where N denotes a (positive) integer; these results also permit a quantitative accounting of energy partition between the principal and secondary lobes of the array pattern. Continuously distributed sources along a finite line segment or an open ended circular cylindrical shell are considered, and estimates for the relatively lower output in the latter configuration are made explicit when the shell radius is small compared to the wave length. A systematic reduction of diverse integrals which characterize the energy output from specific line and strip sources is investigated.

Levine, H.↗

NASA NTRS1980

K/Ar dating of lunar soils. IV - Orange glass from 74220 and agglutinates from 14259 and 14163

Total fusion Ar-40 - A-39 analyses of orange glass from lunar soil 74220 combined with the sums of earlier stepwise heating data by other workers have yielded a precise K/Ar isochron with a slope corresponding to an age of 3.66 + or - 0.03 G.y. for the orange glass. The result is in marginal agreement with Huneke's (1978) age of 3.60 + or - 0.04 G.y. for 74220 glass. The Ar systematics in the agglutinates from 14259 and 14163 are dominated by volume correlated argon. Step-wise heating analyses yield data which define experimentally reproducible linear arrays in Ar-40/Ar-36 vs. K-40/Ar-36 diagrams. The slopes of these arrays correspond formally to very old ages, but it is not clear, however, that such ages have any physical significance.

Alexander, E. C., Jr.↗

NASA NTRS1982

Advanced technology for earth observation - Data processing

The Experimental Land Observing System (ELOS) is to demonstrate major advances in space-based land observation. Program success will depend upon successful demonstration of both space-segment performance and ground-system capabilities. Increases in data-rate, volume, and processing requirements present substantial challenges to the ground data processing system. ELOS is based on the utilization of the multispectral linear array (MLA) sensor, a solid-state, electronically scanned instrument. Current MLA instrument designs offer a number of capabilities beyond those provided in the Landsat imaging devices. These capabilities include greater resolution, inherent registration, onboard calibration, off-nadir pointing capability, and fore/aft pointing capability. The proposed MLA flight mission scenario will be one of continued growth and will include flights on the Space Transportation System. Attention is also given to ground-to-ground data transport, data capture, and the use of high speed computers.

Heffner, P.↗

NASA NTRS1982

Solid state instrumentation concepts for earth resource observation

Late in 1980, specifications were prepared for detail design definition of a six band solid state multispectral instrument having three visible (VIS), one near infrared (NIR), and two short wave infrared (SWIR) bands. This instrument concept, known as the Multispectral Linear Array (MLA), also offered increased spatial resolution, on board gain and offset correction, and additional operational modes which would allow for cross track and stereoscopic viewing as well as a multialtitude operational capability. A description is presented of a summary of some of the salient features of four different MLA design concepts, as developed by four American companies. The designs ranged from the use of multiple refractive telescopes utilizing three groups of focal plane detectors electronic correlation processing for achieving spatial registration, and incorporating palladium silicide (PdSi) SWIR detectors, to a four-mirror all-reflective telecentric system utilizing a beam splitter for spatial registration.

Richard, H. L.↗

NASA NTRS1982

Land remote sensing activities in the US

The LANDSAT D system, shuttle imaging radar instruments, the thermal infrared multispectral scanner system, the shuttle multispectral infrared radiometer, and the multispectral linear array program are described. These programs will develop advanced optical and microwave sensor technologies to support a broad spectrum of aircraft, shuttle and free flier missions for research in agriculture, geology, hydrology and geography. A broad based fundamental research effort coupled with the development of improved data acquisition and information extraction techniques is planned to improve fundamental understanding of the remote sensing process and fully exploit its capabilities.

Keller, S. W.↗

NASA NTRS1981

Status and outlook for NASA's Land Remote Sensing Program

Both LANDSAT 2 and LANDSAT 3 are currently in operational status following recovery from technical problems. The LANDSAT D program continues NASA's R&D with the dual objectives of assessing the capabilities of the thematic mapper sensor and evaluating the requirements for an operational land observing system. LANDSAT D' will not be launched until LANDSAT D ceases operation, to provide data continuity through 1988. Future NASA remote sensing programs will continue to emphasize research, technology development, cooperative projects with end users of data and cooperation with the National Oceanic and Atmospheric Administration (NOAA) on transition to an operational land observing system. Technology development should extend the results of research to practical applications through improved ground data processing and information extraction techniques and development of new sensors such as the solid state multi-spectral linear array.

Weinstein, R. H.↗

NASA NTRS1982

Experimental land observing data system feasibility study

An end-to-end data system to support a Shuttle-based Multispectral Linear Array (MLA) mission in the mid-1980's was defined. The experimental Land Observing System (ELOS) is discussed. A ground system that exploits extensive assets from the LANDSAT-D Program to effectively meet the objectives of the ELOS Mission was defined. The goal of 10 meter pixel precision, the variety of data acquisition capabilities, and the use of Shuttle are key to the mission requirements, Ground mission management functions are met through the use of GSFC's Multi-Satellite Operations Control Center (MSOCC). The MLA Image Generation Facility (MIGF) combines major hardware elements from the Applications Development Data System (ADDS) facility and LANDSAT Assessment System (LAS) with a special purpose MLA interface unit. LANDSAT-D image processing techniques, adapted to MLA characteristics, form the basis for the use of existing software and the definition of new software required.

Buckley, J. L.↗

NASA NTRS1982

Geographic science team

The rational for using remote sensing in land use/land cover, geomorphology, and cartography applications is stated as well as potential uses in each of these areas. The next step to be perfected is indicated. Spatial and spectral resolution requirements for photointerpretations and/or multispectral pattern recognition of geomorphic elements and of cultural surface cover are listed. Requirements for photographic/analog or digital photogrammetry from spaceborne multispectral linear array sensors are included. A prioritized summary of data gaps in the geographic sciences is included.

Bryant, N.↗

NASA NTRS1982

An automated mapping satellite system (MAPSAT)

Digital data from highly stabilized stereo linear arrays are amenable to simplified processing to produce both planimetric imagery and elevation data. A satellite, called MAPSAT, including this concept was proposed to accomplish automated mapping in near real time. Image maps as large as 1:50,000 scale with contours as close as 20-m interval may be produced from MAPSAT data.

Colvocoresses, A. P.↗

NASA NTRS1982

Absolute radiometric calibration of advanced remote sensing systems

The distinction between the uses of relative and absolute spectroradiometric calibration of remote sensing systems is discussed. The advantages of detector-based absolute calibration are described, and the categories of relative and absolute system calibrations are listed. The limitations and problems associated with three common methods used for the absolute calibration of remote sensing systems are addressed. Two methods are proposed for the in-flight absolute calibration of advanced multispectral linear array systems. One makes use of a sun-illuminated panel in front of the sensor, the radiance of which is monitored by a spectrally flat pyroelectric radiometer. The other uses a large, uniform, high-radiance reference ground surface. The ground and atmospheric measurements required as input to a radiative transfer program to predict the radiance level at the entrance pupil of the orbital sensor are discussed, and the ground instrumentation is described.

Slater, P. N.↗

NASA NTRS1982

Atmospheric effects on radiation reflected from soil and vegetation as measured by orbital sensors using various scanning directions

Ground-measured spectral reflectance data for Avondale loam and drought-stressed and unstressed wheat were converted into digital counts for spectral bands 5 and 7 of the Landsat Multispectral Scanner System (MSS). For dry loam, the differences between ratios of MSS bands 7-5 as determined from space and from ground level measurements were 2.3 percent for clear and 5.6 percent for turbid atmospheric conditions. By contrast, for wet loam the differences were 10.4 and 29.5 percent. It is found that atmospheric conditions may cause a delay of from 3 to 7 days in the discrimination between drought-stressed and unstressed wheat. For oblique angle observations the atmospheric modification of ground-measured reflectances increased with angle at a greater rate in the 0/180 deg azimuth than in the 90/270 deg azimuth. Implications of this result are discussed for oblique angle Systeme Probatoire d'Observation de la Terre (SPOT), Mapsat, future multispectral linear array system imagery, and wide-angle imagery collected from scanners in high-altitude aircraft.

Slater, P. N.↗

NASA NTRS1983

Use of the Space Shuttle for remote sensing experimentation during the 1980's

Planned and possible future experiments that may be conducted on Space Shuttle missions of the mid and later 1980s are discussed. Remote sensing experiments will be performed on Shuttle missions STS-7, STS-9, STS-11, and STS-17, and will conduct surveys using the Modular Optoelectronic Multispectral Scanner, a multispectral linear array imager; a high-resolution metric photographic camera; the Microwave Remote Sensing experiment, with capabilities for passive and active operation as an X-band radiometer, scatterometer or synthetic aperture radar; the Large Format Camera, a high-resolution photogrammetric camera with forward motion compensation; and the four experiments of the OSTA-3 payload: Shuttle Imaging Radar-B, the Measurement of Air Pollution from Space experiment, the Feature Identification and Location Experiment, and the Large Format Camera. Conceptual plans for experiments that may be conducted in the latter part of the decade include a high spectral resolution imaging sensor, multispectral radar surveys, and multispectral measurements in the thermal infrared.

Settle, M.↗

NASA NTRS1982

Integrating 128-element linear imager for the 1 to 5 microns region

Useful charge integration has been achieved in high quality photovoltaic InSb diodes when combined with a FET multiplexing (MUX) scheme. An experimental detector assembly with a linear array of 128 InSb diodes coupled to a FEX MUX has been developed. The first stage J-FET preamp, pixel reset switch, MUX, and the InSb array are contained in a hybrid microcircuit of compact dimensions. A low noise preamplifier topology which capitalizes on the low video line capacitance inherent with hybrid fabrication techniques is also utilized. Measurements indicate a signal-to-noise ratio of over 1000:1 and response uniformity of + or - 2 percent. Sample images show subtle detail which supports the estimated radiometric sensitivity of 0.01 K.

Bailey, G. C.↗

NASA NTRS1983

Flight effects on fan noise with static and wind tunnel comparisons

A flight test program utilizing a JT15D-1 turbofan engine has been conducted with the objectives of studying flight effects on fan noise and evaluating the simulation effectiveness of both a wind tunnel and a static test configuration that incorporated an inlet control device (ICD). In conjunction with synchronized laser-radar tracking and meteorological profile information, data obtained from a linear array of ground microphones was narrowband-analyzed and ensemble-averaged to yield highly accurate far-field flight acoustic results. Utilizing appropriate corrections, flight, wind tunnel, and static acoustic data were normalized to a static-equivalent, 100-foot radius, lossless reference condition. Data comparisons showed that both the static test with ICD and wind tunnel were generally very effective in simulating flight blade-passage-frequency (BPF) noise levels. However, differences were observed in broadband noise levels and in the details of the multiple-pure-tone harmonics.

Preisser, J. S.↗

NASA NTRS1982

The use of the Space Shuttle for land remote sensing

The use of the Space Shuttle for land remote sensing will grow significantly during the 1980's. The main use will be for general land cover and geological mapping purposes by worldwide users employing specialized sensors such as: high resolution film systems, synthetic aperture radars, and multispectral visible/IR electronic linear array scanners. Because these type sensors have low Space Shuttle load factors, the user's preference will be for shared flights. With this strong preference and given the present prognosis for Space Shuttle flight frequency as a function of orbit inclination, the strongest demand will be for 57 deg orbits. However, significant use will be made of lower inclination orbits. Compared with freeflying satellites, Space Shuttle mission investment requirements will be significantly lower. The use of the Space Shuttle for testing R and D land remote sensors will replace the free-flying satellites for most test programs.

Thome, P. G.↗

NASA NTRS1982

Absolute radiometric calibration of advanced remote sensing systems

Slater, P. N.↗