Vanadium isotopic composition and contents in lunar rocks and dust from the Ocean of Storms
Apollo 12 lunar samples 12002,128, 12021,49, 12038,43 and 12070,52 vanadium isotopic composition
Balsiger, H.↗
SEARCH · Search NASA
Results for “LUNAR COMPOSITION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Chemical composition of sawdust from lunar rock 12013 and comparison of a Java tektite with the rock.
Abundances of 11 major and minor elements and 11 trace elements have been determined by instrumental neutron activation analysis of two Apollo 12013 rock fragments, a sample of rock 12013,17 sawdust, and a Java tektite (J2). Although the abundances of major elements in tektite J2 are similar to those of rock 12013, comparison of the minor and trace elements shows that no fragment of sawdust or rock 12013 that has been analyzed to date is chemically similar to tektite glass. Rock sawdust is representative of ?whole rock' composition only if the amount of contamination from the sawing process is known. After appropriate correction for saw wire contamination, analyses of sawdust yield fairly accurate averaged elemental compositions of complex clastic lunar and other rocks.
Showalter, D. L.↗
Lunar velocity structure and compositional and thermal inferences
Seismic data from Apollo Passive Seismic Network stations are analyzed to determine the velocity structure in the lunar crust and mantle. Since the publication of earlier results additional data has become available from the S-IVB impacts of the Apollo 16 and 17 missions and the LM ascent stage impact of the Apollo 17 mission. Data from these artificial impacts now cover a distance range of 9 to 1700 km. Travel times, amplitudes, and theoretical seismograms are used to derive a velocity structure for the outer 150 km of the moon. Preliminary results are given from the analysis of the complete set of seismograms.
Toksoz, M. N.↗
Process Development and Testing for Lunar Habitats
Non-metallic composites are appealing for Lunar habitats due to their low specific weight and contribution to passive radiation shielding. This application of composite materials presents notable challenges, however: flammability risks are higher due to elevated oxygen levels expected in habitat structures and absorbed radiation can cause damage long-term. The Materials and Processes Laboratory at Marshall Space Flight Center awarded funding for an internal research and development study which included fabrication and testing of composite materials for Lunar habitats. Composite layups used carbon fiber or ultra-high molecular weight polyethylene reinforcement and a variety of polymer matrices. Pre-impregnated fabric was autoclave cured; however, novel coatings were incorporated during select layups. Samples from each panel were used for screening-level flammability testing (ASTM D 2863) and combined vacuum ultraviolet and electron irradiation followed by tension testing (ASTM D5766). Two of the tested composite materials exceeded a 37% limiting oxygen index. Material property degradation for a 10 year simulated radiation dose was minimal in most cases.
manufacturing↗
Ion microprobe analyses of aluminous lunar glasses - A test of the 'rock type' hypothesis
Previous soil survey investigations found that there are natural groupings of glass compositions in lunar soils and that the average major element composition of some of these groupings is the same at widely separated lunar landing sites. This led soil survey enthusiasts to promote the hypothesis that the average composition of glass groupings represents the composition of primary lunar 'rock types'. In this investigation the trace element composition of numerous aluminous glass particles was determined by the ion microprobe method as a test of the above mentioned 'rock type' hypothesis. It was found that within any grouping of aluminous lunar glasses by major element content, there is considerable scatter in the refractory trace element content. In addition, aluminous glasses grouped by major elements were found to have different average trace element contents at different sites (Apollo 15, 16 and Luna 20). This evidence argues that natural groupings in glass compositions are determined by regolith processes and may not represent the composition of primary lunar 'rock types'.
Meyer, C., Jr.↗
The environment at the lunar surface
The geologic nature of the lunar surface and the composition of the lunar atmosphere are discussed. General characteristics are presented such as the strength of the moon's gravitational field. The properties of seismic signals which occur deep within the moon at depths of 700 to 1100 km and are related to tidal forces inside the moon are examined. Tables are also provided of the composition of the lunar atmosphere at night, and of the micrometeorite fluxes on the moon. The magnetic field, radiation environment, composition of regolith, and crater morphologies are also discussed.
Taylor, G. Jeffrey↗
Lunar orbital exploration
Compositional and contour mapping of lunar surface during lunar orbital survey mission
LUNAR SURFACE↗
Endogenous Lunar Volatiles
The chapter will begin with an introduction that defines magmatic volatiles (e.g., H, F, Cl, S) versus geochemical volatiles (e.g., K, Rb, Zn). We will discuss our approach of understanding both types of volatiles in lunar samples and lay the ground work for how we will determine the overall volatile budget of the Moon. We will then discuss the importance of endogenous volatiles in shaping the "Newer Views of the Moon", specifically how endogenous volatiles feed forward into processes such as the origin of the Moon, magmatic differentiation, volcanism, and secondary processes during surface and crustal interactions. After the introduction, we will include a re-view/synthesis on the current state of 1) apatite compositions (volatile abundances and isotopic compositions); 2) nominally anhydrous mineral phases (moderately to highly volatile); 3) volatile (moderately to highly volatile) abundances in and isotopic compositions of lunar pyroclastic glass beads; 4) volatile (moderately to highly volatile) abundances in and isotopic compositions of lunar basalts; 5) volatile (moderately to highly volatile) abundances in and isotopic compositions of melt inclusions; and finally 6) experimental constraints on mineral-melt partitioning of moderately to highly volatile elements under lunar conditions. We anticipate that each section will summarize results since 2007 and focus on new results published since the 2015 Am Min review paper on lunar volatiles [9]. The next section will discuss how to use sample abundances of volatiles to understand the source region and potential caveats in estimating source abundances of volatiles. The following section will include our best estimates of volatile abundances and isotopic compositions (where permitted by available data) for each volatile element of interest in a number of important lunar reservoirs, including the crust, mantle, KREEP, and bulk Moon. The final section of the chapter will focus upon future work, outstanding questions, and any in-sights on the types of samples or experimental studies that will be needed to answer these questions.
McCubbin, F. M.↗
Lunar electrical conductivity from Apollo 12 magnetometer measurements - Compositional and thermal inferences
Lunar electrical conductivity profile from joint power spectral density analysis of Apollo 12 and Explorer 35 magnetometer data
Colburn, D. S.↗
High-sensitivity miniaturized magnetic sector mass spectrometer for the ALSEP program Final report
Lunar ALSEP mass spectrometer for measuring composition of lunar atmosphere
Johnson, F. S.↗
Effects of fractional crystallization and cumulus processes on mineral composition trends of some lunar and terrestrial rock series
A plot of Mg of mafic minerals versus An of plagioclase in cumulate rocks from various lunar and terrestrial rock series shows each series to have a distinct curvilinear trend. The slopes of these trends vary from nearly vertical in the case of lunar anorthosites and Mg-norites to nearly horizontal in the case of gabbros from the mid-Atlantic ridge. Calculations based upon known major element partitioning between mafic minerals, plagioclase and subalkaline basaltic liquids indicate that fractional crystallization coupled with cotectic accumulation of mafic minerals and plagioclase will produce mineral composition trends on the Mg versus An diagram with slopes greater than 1 for cases where An is approximately greater than Mg. Furthermore, fractional crystallization of basaltic magmas with alkali concentrations approaching zero will produce near vertical Mg versus An trends. Therefore, the steep slopes of the lunar rock series are consistent with relatively simple fractionation processes. The relatively flat slope of mineral compositions from gabbros collected from the mid-Atlantic ridge at 26 deg N is inconsistent with simple fractionation processes, and calculations show that periodic refilling of a fractionating magma chamber with picritic magma cannot simply explain this flat slope either.
Longhi, J.↗
Compositional diversity of the lunar North Pole: Preliminary analyses of Galileo SSI data
In December 1992, the Galileo spacecraft passed through the Earth-Moon system for its final gravity assist to Jupiter. The SSI camera obtained several 6-color mosaics of the lunar north polar region and the sunlit nearside and eastern limb at approximately 1.3 km/pixel. Initial analyses have concentrated on the north polar areas to assess the composition of the crust in that region. Representative 6-color calibration SSI spectra (typically 5 x 5 pixels) are shown. Photometric corrections have not yet been applied, and all spectra are scaled to unity at 0.56 microns. The data were first calibrated relative to MS2, a standard are in Mare Serenitatis (18.7 deg N, 21.5 deg E), and the top four plots of highlands, highland craters, maria, and mare craters are displayed relative to MS2. SSI spectra of areas measured with telescopic data (mare MT1/MS2 and mare crater MSA/MS2) agree well with previous data, confirming that the calibration procedures and SSI data are spectrally accurate. The bottom three plots of craters/sun have been calibrated to reflectance using previously obtained telescopic spectra of Apollo 16/MS2 (shown with Highlands/MS2) and laboratory spectra of mature Apollo 16 soil (shown for reference with the Highland Craters/Sun). Although some variations in these spectra mimic previously observed spectra of lunar terrains, several characteristics are unusual. Familiar and unfamiliar properties are observed in these northern latitudes and both types merit further investigation in their geologic context.
Pieters, C. M.↗
The Miniature Radio Frequency Instruments (Mini-RF) Global Observations of Earth's Moon
Radar provides a unique means to analyze the surface and subsurface physical properties of geologic deposits, including their wavelength-scale roughness, the relative depth of the deposits, and some limited compositional information. The NASA Lunar Reconnaissance Orbiter's (LRO) Miniature Radio Frequency (Mini-RF) instrument has enabled these analyses on the Moon at a global scale. Mini-RF has accumulated 67% coverage of the lunar surface in S-band (12.6 cm) radar with a resolution of 30 m/pixel. Here we present new Mini-RF global orthorectified uncontrolled S-band maps of the Moon and use them for analysis of lunar surface physical properties. Reported here are readily apparent global- and regional-scale differences in lunar surface physical properties that suggest three distinct terranes, namely: a (1) Nearside Radar Dark Region; (2) Orientale basin and continuous ejecta; and the (3) Highlands Radar Bright Region. Integrating these observations with new data from LRO's Diviner Radiometer rock abundance maps, as well Clementine and Lunar Prospector derived compositional values show multiple distinct lunar surface terranes and sub-terranes based upon both physical and compositional surface properties. Previous geochemical investigations of the Moon suggested its crust is best divided into three to four basic crustal provinces or terranes (Feldspathic Highlands Terrane (-An and -Outer), Procellarum KREEP Terrane, and South Pole Aitken Terrane) that are distinct from one another. However, integration of these geochemical data sets with new geophysical data sets allows us to refine these terranes. The result shows a more complex view of these same crustal provinces and provides valuable scientific and hazard perspectives for future targeted human and robotic exploration.
Radar observations↗
Compositional studies of the lunar regolith at the Apollo 17 site
Major-, minor-, and trace-element abundance data are presented for twenty-two Apollo 17 samples, twelve Apollo 16 samples, and one Apollo 15 basalt. The data were obtained by INAA employing a 14 MeV neutron generator, a Cf-252 isotopic neutron source and nuclear reactor thermal neutrons. Abundance summations for the twenty-four samples analyzed for major and minor abundance elements averaged 98.8 plus or minus 0.3%. Similarities between the Apollo 17 and the Apollo 11 mare basalts are discussed. Abundances in 13 Apollo 17 soils exhibit the greatest compositional range we have observed for soils from a specific landing site. A strong inverse Fe-Al correlation in all lunar materials we have analyzed with the exception of most Apollo 16 samples is defined by the equation: %Fe = -1.36 %Al + 21.5. A strong direct Mn-Fe correlation is defined by the equation: %Fe = 75.9 %Mn + 0.08. Both regression lines appear to have the mare basalts, as one end-member and an unspecified Al-rich component at the other end. Comparisons of the data from direct O determinations and calculated O abundances based on normal stoichiometry are presented.
Miller, M. D.↗
The MacAlpine Hills lunar meteorite and implications of the lunar meteorites collectively for the composition and origin of the moon
The MAC88104/105 meteorite, a lunar highlands regolith breccia, is described. The rock and a number of its component clasts are characterized. One of the clasts is considered to be a rare pristine nonmare rock containing extraordinarily Fe-rich (Fo40) olivine; the other has silicate compositions that extend the range of the Mg-suite in the direction of the high-mg* end of the ferroan-anorthositic suite. For the major element composition of the crust, the highlands meteorites confirm that the two low-Th central nearside sites, Luna 20 and Apollo 16, are approximately representative. The high Al2O3 composition indicated for the upper crusts supports the magmasphere hypothesis. For the trace-element composition of the crust, the highlands meteorites indicate that the central nearside Apollo and Luna sites are in several respects grossly unrepresentative.
Warren, Paul H.↗
Pieces of the ancient lunar crust - Ages and composition of clasts in consortium breccia 67915
The composition and chronology of clasts representing three minor lithologies in consortium breccia 67915 are discussed. The lithologies studied are: sodic ferrogabbro, pristine troctolitic anorthosite (67915,26), and granulitic troctolitic anorthosite (67915,67). These lithologies were presumed to represent samples of the ancient lunar crust. The pristine troctolitic anorthosite, a typical member of the pristine anorthosite suite, contains little or no trapped liquid consistent with its two-phase mineralogy. The plagioclase separates have Ar-39-Ar-40 plateau ages of 4.10 + or - 0.06 b.y., and a final rise in the age pattern may represent a 'memory' of the earlier evolution. The granulitic troctolitic anorthosite, which has 13 times larger REE abundances, displays a continuous rise of the Ar-40/Ar-39 ratio. The last 25 percent of the Ar-39 release data establish a minimum age of over 3.5 b.y., but the Pu-244/Nd chronology suggests an age of about 4.3 b.y. The sodic ferrogabbro samples, which appear to be members of the Mg-gabbronorite group of pristine rocks, show large Ar losses but indicate plateaus in the low-temperature data, suggesting a metamorphic event more recently than 260 m.y. ago, a time that is consistent with the North Ray impact event 50 m.y. ago.
Marti, K.↗
Compositional implications regarding the lunar origin of the ALHA 81005 meteorite
Geochemically, ALHA 81005 has all the attributes expected of a regolith sample from the lunar highlands. Most important is its Fe/Mn ratio (77), within an uncertainty the same as the mean lunar ratio. There are significant differences, however, in comparison to previously sampled lunar regoliths. The closest precedents are the Apollo-16 and Luna-20 regoliths, particularly the latter, but ALHA 81005 has lower contents of Na, Ti, and incompatible elements. Feldspathic granulitic breccias such as 72559, which texturally resemble the most abundant type of clast in ALHA 81005, are also similar compositionally. From its low KREEP and Na contents ALHA 81005 is inferred to have originated well away from the K, Th, and U-rich region near the center of the nearside, at least as far away as the eastern limb.
Kallemeyn, G. W.↗
Lunakhod-2: Preliminary research results
Results from the Lunakhod 2 experiment on the surface property variations and relief structure of lunar craters are presented. Tectonic fractures, iron composition of lunar rocks, magnetic measurements, lunar sky brightness, and corpuscular radiation of the lunar body were studied.
Vinogradov, A. P.↗