Search NASA⌕ Search

SEARCH · Search NASA

Results for “Liner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Effect of Liner Cooling Flow on Combustor Emissions for Commercial Supersonics Technology

An overview is provided of a parametric study conducted to study the effect of liner cooling airflow rates on NOx emissions of a seven-element lean-direct injection (LDI) module with radial airflow main swirlers. The goal of the CFD study was to determine the increase in cooling flow rate at which the NOx emissions would exceed 20% of the predicted emissions with zero liner cooling flow. The Open version of the National Combustion Code (OpenNCC) was used to perform two-phase reacting flow computations with a new LDI injection module design with radial airflow swirlers instead of axial airflow swirlers. CFD analysis with OpenNCC predicted a 20% increase in EINOx emissions was reached when the liner cooling airflow rate was increased to 15% of the baseline combustor airflow rate. The liner cooling flow rate was predicted to have a non-linear effect on increase in overall EINOx of the seven element LDI injection module.

CFD↗
NASA NTRSDate not supplied

Preliminary Design of a Distributed Facesheet Acoustic Liner for Broadband Acoustic Attenuation

The purpose of this study is to investigate the acoustic performance of a liner with a distributed facesheet and a uniform depth core for broadband attenuation. The distributed facesheet is comprised of a cluster of three distinct cell resonators of varying hole diameter and porosity replicated over the active liner treatment area. A target frequency range of 1000 to 2000 Hz and an attenuation metric of 10 dB are chosen. An optimizer is used to determine the optimal facesheet designs for flow conditions of Mach 0.0 and Mach 0.3. The samples are tested in the Grazing Flow Impedance Tube at NASA Langley Research Center. The two liners are shown to achieve at least 10 dB attenuation over frequency ranges of 700 and 400 Hz, respectively, when tested at their respective designed flow speeds. This study demonstrate that a distributed facesheet with a uniform depth core can be successfully used to achieve broadband sound absorption.

acoustic liners↗
NASA NTRS2023

Low-Drag Acoustic Liner Development

Interest in characterization of the aerodynamic drag of acoustic liners has increased in the past several years. This report details experiments in the NASA Langley Grazing Flow Impedance Tube to quantify the relative drag of several perforate-over-honeycomb liner configurations at flow speeds of M=0.3 and 0.5. Various perforate geometries and orientations are investigated to determine their resistance factors using a static pressure drop approach. Comparison of these resistance factors gives a relative measurement of liner drag. For these same flow conditions, acoustic measurements are performed simultaneously with the drag measurements for tonal excitation from 400 to 3000 Hz at source sound pressure levels of 140 and 150 dB. Educed impedance and attenuation spectra are used to determine the impact of variations in perforate geometry on acoustic performance. The goal is to identify a perforate that will reduce the drag penalty associated with conventional round-hole perforates by 60%. One perforate design, based on a slot geometry, is shown to reduce this penalty by 50%. Further reductions may be possible but require a reduction in measurement uncertainty to allow a statistically rigorous evaluation.

drag↗
NASA NTRS2024

Conceptual Design and Validation of a Bent-Perforation-Path Acoustic Liner

An acoustic liner concept is developed that increases the effective thickness of perforate sheet holes by bending the perforation paths within the facesheet. This significantly increases both the viscous-loss resistance and mass reactance properties of the acoustic liner, creating low-frequency absorption utilizing a small amount of liner volume. An initial concept is designed, 3D-printed, and tested in a normal-incidence impedance tube to verify the acoustic properties. Comparisons to an impedance model are shown with good agreement to test data, although further work needs to be done to more accurately capture the losses associated with bends within the hole. Follow-on concepts are also discussed that attempt to address the current shortcomings of the initial design.

acoustic liner perforate impedance↗
NASA NTRSDate not supplied

Influence of Source Type on Acoustic Liner Impedance in No Flow

This paper presents findings from a study conducted under a challenge of the International Forum for Aviation Research (IFAR), which consists of partners from various national research labs around the world. A series of normal incidence impedance tube tests are performed to identify differences in acoustic impedance for various types of source excitations. These source types include single-tone, multitone, and broadband. To better understand these differences, six unique acoustic liners are tested using these source types at various sound pressure levels and frequencies. Multitone sources of up to five discrete frequencies at a time (both harmonic and nonharmonic excitations) are included. Predictions are also shown to assess capability of capturing source type in the acoustic liner design process. It is determined that impedance behavior due to single-tone and broadband source excitations is largely well-understood and predictable. Multitone source excitations, however, yield unpredictable impedance characteristics that appear highly dependent on the summed coherent waveform that is incident upon the acoustic liner. Future work on this topic is warranted to improve impedance prediction capability of multitone excitation.

acoustic liner impedance multitone prediction sour↗
NASA NTRS1973

Development of a fracture control method for composite tanks with load sharing liners

This experimental program was undertaken to establish a fracture control method for composite tanks with load sharing liners. Uniaxial specimens containing surface flaws were loaded to failure (static fractured) and cycled to failure and the results were compared with burst tests and cyclic life tests of composite tanks having surface flaws present in the load sharing metal liners. The liner materials investigated were Inconel X750 STA, 2219-T62 aluminum and cryostretched 301 stainless steel at room temperature and at 78 K (-320 F) in liquid nitrogen. Differences were observed in comparing the uniaxial and tank test results. These differences should be resolved if an adequate fracture control method is to be developed.

Bixler, W. D.↗
NASA NTRS1975

Fracture control method for composite tanks with load sharing liners

The experimental program was based on the premise that the plastic sizing cycle, which each pressure vessel is subjected to prior to operation, acts as an effective proof test of the liner, screening out all flaws or cracks larger than a critical size. In doing so, flaw growth potential is available for cyclic operation at pressures less than the sizing pressure. Static fracture and cyclic life tests, involving laboratory type specimens and filament overwrapped tanks, were conducted on three liner materials: (1) 2219-T62 aluminum, (2) Inconel X750 STA, and (3) cryoformed 301 stainless steel. Variables included material condition, thickness, flaw size, flaw shape, temperature, sizing stress level, operating stress level and minimum-to-maximum operating stress ratio. From the empirical data base obtained, a procedure was established by which the service life of composite tanks with load sharing liners could be guaranteed with a high degree of confidence.

Bixler, W. D.↗
NASA NTRS1976

Optimization of suppression for two-element treatment liners for turbomachinery exhaust ducts

Sound wave propagation in a soft-walled rectangular duct with steady uniform flow was investigated at exhaust conditions, incorporating the solution equations for sound wave propagation in a rectangular duct with multiple longitudinal wall treatment segments. Modal analysis was employed to find the solution equations and to study the effectiveness of a uniform and of a two-sectional liner in attenuating sound power in a treated rectangular duct without flow (M = 0) and with uniform flow of Mach 0.3. Two-segment liners were shown to increase the attenuation of sound as compared to a uniform liner. The predicted sound attenuation was compared with measured laboratory results for an optimized two-segment suppressor. Good correlation was obtained between the measured and predicted suppressions when practical variations in the modal content and impedance were taken into account. Two parametric studies were also completed.

Motsinger, R. E.↗
NASA NTRS1976

Prediction of the acoustic impedance of duct liners

Recent research which contributes to the prediction of the acoustic impedance of duct liners is reviewed. This review includes the linear and nonlinear properties of sheet and bulk type materials and methods for the measurement of these properties. It also includes the effect of grazing flow on the acoustic properties of materials. Methods for predicting the properties of single or multilayered, point reacting or extended reaction, and flat or curved liners are discussed. Based on this review, methods for predicting the properties of the duct liners which are typically used in aircraft engines are recommended. Some areas of needed research are discussed briefly.

Zorumski, W. E.↗
NASA NTRS1975

Optimization of duct acoustic liners of finite length

Lining design procedures generally ignore the effects of discontinuous impedance changes on reflection and modal redistribution of incident energy. The present study involves identification of the mechanisms of optimal suppression by segmented liners, including impedance discontinuity effects. The mathematical model involves rectangular ducts in the absence of mean flow. Segmented acoustic fields are represented by duct eigenfunction expansions, and mode matching is used to ensure continuity of the total field. Extensive parameter studies were used to identify attenuation mechanisms and to define preliminary liner configurations. These are used as starting values in conjugate-gradient optimization studies. Optimal segmented liners are presented and it is shown that, if the sound source is sufficiently well-defined, conventional infinite duct optimum attenuation rates can be improved upon by taking advantage of wall impedance discontinuities. Finally, follow-on work which will involve experimental verification and extension to the case with mean flow in the duct is described.

Beckemeyer, R. J.↗
NASA NTRS1976

Experimental-analytical correlation of optimum duct acoustic liner performance

Mode matching and segmented duct analytical models have been developed to take advantage of relative placement of liner segments in the design of optimal duct acoustic liners of one, two, and three segments. This paper presents experimental results which were obtained for liners installed in a rectangular duct for the case with no mean airflow through the duct. Excellent correlation is shown between the analytical and experimental data, thus verifying the analytical procedures used to design the optimum segmented lining configurations.

Patterson, J. D.↗
NASA NTRS1978

Ablative liner locates hotspots

Ablative liner quantifies local-heating effects in combustion chambers and other applications. By identifying hotspots and helping to map heat-flux patterns, liner is useful tool for research in engine design. Liner permanently records heat flux at each point by depth of ablation due to local heating. Technique determines best locations for thermocouples for more extensive testing.

Mercer, S. D.↗
NASA NTRS1976

Optimal one-section and two-section circular sound-absorbing duct liners for plane-wave and monopole sources without flow

A discrete frequency study is made of the influence of source characteristics on the optimal properties of acoustically lined uniform and two section ducts. Two simplified sources, a plane wave and a monopole, are considered in some detail and over a greater frequency range than has been previously studied. Source and termination impedance effects are given limited examination. An example of a turbomachinery source and three associated source variants is also presented. Optimal liner designs based on modal theory approach the Cremer criterion at low frequencies and the geometric acoustics limit at high frequencies. Over an intermediate frequency range, optimal two section liners produced higher transmission losses than did the uniform configurations. Source distribution effects were found to have a significant effect on optimal liner design, but source and termination impedance effects appear to be relatively unimportant.

Lester, H. C.↗
NASA NTRS1976

Filament wound pressure vessels with load sharing liners for Space Shuttle Orbiter applications

It is recognized that the use of overwrapped pressure vessels with load sharing liners may provide significant weight savings for high pressure gas containment in Space Shuttle Orbiter systems. The technology readiness to produce Kevlar wound vessels with load sharing liners of titanium 6Al-4V, Inconel 718 or cryoformed 301 steel has been demonstrated. It has been estimated that about 400 lbs can be saved in the Orbiter by using overwrapped vessels with load sharing liners instead of monolithic metal designs. Total weight of the composite vessels would be about 1350 lbs as opposed to about 1750 lbs for all-metal vessels.

Ecord, G. M.↗
NASA NTRS1977

Effects of grazing flow on the steady-state flow resistance and acoustic impedance of thin porous-faced liners

The results of an investigation of the effects of grazing flow on the steady-state flow resistance and acoustic impedance of seven Feltmetal and three Rigimesh thin porous-faced liners are presented. The acoustic impedance was measured using the two-microphone method. The principal findings of the study are (1) the effects of grazing flow were measured and found to be negligible, (2) negligible differences were measured between steady-state and acoustic resistance, (3) a semi-empirical model was derived that correlated both the steady-state resistance data and the acoustic impedance data of the seven Feltmetal liners. These findings suggest that nongrazing flow steady-state flow resistance tests could provide considerable insight into the acoustic behavior of porous liners in a grazing flow environment.

Hersh, A. D.↗
NASA NTRS1978

Effects of grazing flow on the steady-state flow resistance and acoustic impedance of thin porous-faced liners

The effects of grazing flow on the steady state flow resistance and acoustic impedance of seven Feltmetal and three Rigimesh thin porous faced liners were studied. The steady-state flow resistance of the ten specimens was measured using standard fluid mechanical experimental techniques. The acoustic impedance was measured using the two microphone method. The principal findings of the study are that the effects of grazing flow were measured and found to be small; small differences were measured between steady-state and acoustic resistance, and a semi-empirical model was derived that correlated the steady-state resistance data of the seven Feltmetal liners and the face sheet reactance of both the Feltmetal and Rigimesh liners.

Hersh, A. S.↗
NASA NTRS1978

Some load limits and self-lubricating properties of plain spherical bearings with molded graphite fiber reinforced polyimide liners to 320 C

Plain spherical bearings with molded liners of self-lubricating graphite fiber-polyimide composite were developed and their dynamic load capacities were determined. Liners were prepared by transfer molding a prepolymer resin-fiber mix into the space between the ball and outer race, the completing polymerization under heat and pressure. Bearing dynamic load capacities were in excess of 140 MPa (20,000 psi) from room temperature to 260 C and about 70 MPa (10,000 psi) at 320 C. Friction coefficients were about 0.20 at room temperatures and light loads and tended to decrease with increasing temperatures and loads to about 0.15. Thermal expansion of the liner at uniform bearing temperatures of 200 C or higher produced a bearing preload which could be alleviated by providing an initial internal diametral clearance of 0.05 to 0.10 mm.

Sliney, H. E.↗
NASA NTRS1979

User guide for STRMLN: A boundary-layer program for contoured wind-tunnel liner design

A 2-D boundary layer computer code developed to process data for an arbitrary number of streamlines is presented. Provisions are included for the computer code to determine either mass transfer rates necessary for an effective boundary layer displacement of zero thickness or the effective displacement thickness for a specified mass transfer-rate distribution. The computer code was developed to be compatible with other computer codes which are being modified and/or developed at the NASA-Langley Research Center in order to design the three dimensional, contoured, wind tunnel liner used in transonic testing of a laminar flow control system installed on a supercritical airfoil section. A brief discription of the liner design procedure, representative liner calculations, adaptive-wall design for a two dimensional wind tunnel test, and other applications are reported.

Anderson, E. C.↗