Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lithium distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Bioinspired mechanically interlocking holey graphene@SiO 2 anode

Mechanically interlocking structures that can enhance adhesion at the interface and regulate the stress distribution have been widely observed in biological systems. Inspired by the biological structures in the wings of beetles, we synthesized a holey graphene@SiO 2 anode with strong mechanical interlocking, characterized it electrochemically, and explained its performance by finite element analysis and density functional calculations. The mechanically interlocking structure enhances lithium-ion (Li + ) storage by transmitting the strain from SiO 2 to the holey graphene and by a mechano-electrochemical coupling effect. The interlocking fit hinders the abscission of SiO 2 and the distinctive structure reduces the stress and strain of SiO 2 during (de)lithiation. The positive mechano-electrochemical coupling effect preserves the amount of electrochemically active phase (Li x Si) during cycles and facilitates Li + diffusion. Therefore, the capacity shows only a slight attenuation after 8000 cycles (cycling stability), and the specific capacity is ~1200 mA h g –1 at 5 A/g (rate-performance). This study furnishes a novel way to design high-performance Li + /Na + /K + /Al 3+ anodes with large volume expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Savannah River National Laboratory – General Fusion 2023 INFUSE Report (Rev.1)

This report describes the results from an INFUSE research project, where Savannah River National Laboratory (SRNL) in collaboration with General Fusion (GF) used process modeling to understand and optimize commercial power plant (CPP) fuel cycle designs based on parameters provided by GF. The study primarily focused on two candidate fuel cycles with different blanket materials, one with a lead lithium eutectic (LLE) blanket and the other with a pure lithium (Li) blanket. LLE benefits from a low melting point, favorable neutronics, and lower reactivity, but liquid lithium has the potential for higher tritium breeding ratios (TBR) and does not poison the plasma as a high Z contaminant. It was found that the main differences between LLE and Li designs are the extraction technologies required to remove tritium from the blanket and the amount of tritium and its distribution within the facility. More than 80% of the in-process tritium inventory for the LLE design is contained in the isotope separation system, while for the Li design, over 60% of the in-process tritium inventory is contained within the blanket material. This is due to significant tritium retention by Li. For the Li blanket, the burden of tritium processing rests on the blanket extraction technology rather than the traditional exhaust processing route. Thus, the blanket extraction technology is a main driver of tritium inventory in the Li system and determines the subsequent interface with the tritium processing plant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Li 3– x Zr x (Ho/Lu) 1– x Cl 6 Solid Electrolytes Enable Ultrahigh-Loading Solid-State Batteries with a Prelithiated Si Anode

We report two new families of lithium metal chloride solid electrolytes Li 3–x Zr x (M) 1–x Cl 6 (0 ≤ x ≤ 0.8; M = Ho or Lu) with ionic conductivities of up to 1.8 mS cm –1 and a low activation energy of 0.34 eV. Structural elucidation via high-resolution neutron diffraction determines the Li ion distribution in trigonal Li 3 HoCl 6 , orthorhombic-I Li 3 LuCl 6 , and orthorhombic-II Li 2.4 Zr 0.6 (Ho/Lu) 0.4 Cl 6 . The last compound exhibits well-connected Li-ion pathways and abundant Li-ion carriers/vacancies to promote diffusion. All-solid-state batteries with Li 2.6 Zr 0.4 (Ho/Lu) 0.6 Cl 6 solid electrolytes and NCM85 cathodes exhibit stable cycling up to 4.6 V vs Li + /Li, which is even preserved up to 4.8 V. Stable cathode interphases are formed for both electrolytes upon cycling to 4.3, 4.6, and 4.8 V cutoff potentials, as identified by a ToF-SIMS analysis. Solid-state cells with a prelithiated Li 0.7 Si anode exhibit a significantly increased initial coulombic efficiency of 94.5% compared to Si and a high areal capacity of up to 16.3 mAh·cm –2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comprehensive Assessment of On-And Off-Board Vehicle-To-Grid Technology Performance and Impacts on Battery and the Grid

This project defined, developed, and tested the open standards-based requirements, engineering design and system integration of on and off-vehicle Vehicle-to-Grid technologies both on the grid and on the PEV, to assess their effectiveness in implementing the use cases that create value for the grid, which in turn, can be passed on to the ratepayers and the PEV owners. The project comprised of three key categories of work and four key sub-areas of work. The three key categories were: On-Vehicle V2G, Off-Vehicle V2G, and impact of V2G operation on the battery capacity degradation. The four key sub-areas of work under each of these categories were: defining requirements, implementing the technology, performing system integration testing, and estimating the value of each of the grid services under specific assumptions, on a per-vehicle and on an aggregated basis. The technical implementation demonstrated the validity of standards-based approach to grid integration that led to interoperability, in addition to assessing the operational details with grid constraints imposed at the transformer level. The technology implementation also identified the subtle gaps in the standards definition to close the feedback loop on the accuracy of the standards as written, which are being implemented as revisions to the appropriate protocols. The battery impacts assessment developed a test cycle that the batteries from a real PHEV were subjected to for both the mobility-only and mobility with V2G specific energy cycling. While the battery impact results show a clear incremental degradation in response to additional throughput for V2G application purposes, the amount of additional kWh that can be made available without exceeding the end-of-life capacity definition of the battery at its 10-year warranty period was found to be significant. Given that the PEV battery being exercised during testing was a PHEV battery (smaller energy capacity), and 44% of its usable energy (i.e., SOC) was utilized daily for V2G applications, the EVs with much larger batteries will fare much better, either in terms of extracting more value in terms of incremental kWh for V2G, or in terms of relative incremental degradation of the capacity through the battery lifespan. Further, this battery was the second-generation Lithium-Ion chemistry circa 2015, which is at least two generations ago. Continual improvements in electrochemistry and manufacturing techniques as well as on-board capacity will enable the future batteries to provide even more energy for non-mobility-related services. Finally, the valuation of V2G energy services at the premise, distribution, and the ISO/market level was carried out for both the on-vehicle and off-vehicle cases, to understand both the GHG mitigation and operational efficiency improvements in quantitative terms. The analysis indicates that between $\$400$ and $\$1400$ per year of total value to the grid can be realized. When netted of costs to implement V2G either on or off-vehicle, the net value is available to be shared between the ratepayers and the EV owners. Over the life of the EV, therefore, this value becomes significant and can easily provide both ratepayer and EV owner benefits more than the cost of the equipment, either on or off-board, in addition to providing GHG mitigation benefits both on the grid and on the mobility sides. For these benefits to accrue, the key learnings from both the on- and off-vehicle V2G parts of the project indicate the need for at-scale demonstrations through involvement of real EV owners to validate both the technical feasibility, interoperability, as well as real grid benefits by performing extensive data collection and analysis. This will help inform the grid planners, the program designs, and tariff designers, as well as automotive and equipment manufacturers how best to create their products to maximize grid, ratepayer, and EV owner value.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗
DOE OSTI2023

Impact of fluorination on Li + solvation and dynamics in ionic liquid-hydrofluoroether locally concentrated electrolytes

The thermal, physical, structural, and transport properties of ionic liquid (IL) electrolytes based on n-methyl-n-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide [PYR14][TFSI] and Li-salts of lithium (nonafluorobutane)(trifluoromethanesulfonyl)imide [Li][IM14] and [Li][TFSI] (0 ≤ x Li ≤ 0.3), with addition of 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE) (0 ≤ x TTE ≤ 0.45) were studied. While [IM14] increases glass transition, TTE improves conductivity over a wider liquidus range. Li + is solvated primarily by [TFSI] with some contribution by [IM14]. However, both 7 Li- 19 F HOESY NMR and spatial distribution functions (SDFs) derived from molecular dynamics (MD) indicate short contacts between the fluorines of TTE and Li + . This is a result of tighter anion-solvated Li + without aggregation of the Li + solvates, consistent with Raman measurements, thus confirming the existence of fluorous domains in the bulk which leads to improved fluidity and a Li + diffusivity of 1.26 x 10 –12 m 2 /s at 0 °C (x Li = 0.20) with a Li + transference of 0.16. Improved transport properties translated to a higher capacity of the TTE/IL electrolyte in a Li||LiFePO 4 half-cell with 95mAh/g at 0.1C, compared to the IL electrolyte without TTE (60 mAh/g). Furthermore, this study demonstrates the tunability of solvation and transport properties in IL electrolytes by asymmetric fluorinated anions and hydrofluoroether co-solvents for low temperature Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

In Situ Visualization of Local Distortions in the High- T c Molecule-Intercalated Li x (C 5 H 5 N) y Fe 2– z Se 2 Superconductor

A time-resolved synchrotron X-ray total scattering study sheds light on the evolution of the different structural length scales involved during the intercalation of the layered iron–selenide host by organic molecular donors, aiming at the formation of the expanded-lattice Li x (C 5 H 5 N) y Fe 2– z Se 2 hybrid superconductor. The intercalates are found to crystallize in the tetragonal ThCr 2 Si 2 -type structure at the average level, however, with an enhanced interlayer iron–selenide spacing ( d = 16.2 Å) that accommodates the heterocyclic molecular spacers. Quantitative atomic pair distribution function (PDF) analysis at variable times suggests distorted FeSe 4 tetrahedral local environments that appear swollen with respect to those in the parent β-FeSe. Simultaneously acquired in situ synchrotron X-ray powder diffraction data disclose that secondary phases (α-Fe and Li 2 Se) grow significantly when a higher lithium concentration is used in the solvothermal reaction or when the solution is aged. These observations are in line with the strongly reducing character of the intercalation medium’s solvated electrons that mediate the defect chemistry of the expanded-lattice superconductor. In the latter, intralayer correlated local distortions indicate electron-donating aspects that reflect in somewhat enlarged Fe–Se bonds. Additionally, they also reveal a degree of relief of chemical pressure associated with a large distance between Fe and Se sheets (“taller” anion height) and a stretched Fe–Fe square planar topology. The elongation of the latter, derived from the in situ PDF study, speaks for a plausible increase in the Fe-site vacancy concentration. The evolution of the local structural parameters suggests an optimum reaction window where kinetically stabilized phases resemble the distortions of the edge-sharing Fe–Se tetrahedra, required for a high- T c in expanded-lattice iron-chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes

Previous studies have demonstrated that chemical vapor deposition carbon coating on silicon (Si@C) can enhance the electrochemical performance of lithium-ion batteries with Si-based anodes. However, the underlying mechanisms contributing to this improvement have not been fully explored. Here, we address this knowledge gap by applying a suite of characterization methods to evaluate Si@C anodes prepared by reducing acetylene on ball-milled Si particles. Raman mapping measurements show that the C coating (<5 nm thick) enables a homogeneous Si and carbon distribution during the slurry casting process, thereby promoting Si utilization during cycling. The coating’s microstructure and morphology were evaluated using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy, and neutron reflectivity experiments. Electrochemical impedance spectroscopy measurements upon cycling indicate that carbon coating also reduces the overall resistance as benchmarked against bare Si anodes. Galvanostatic cycling in half-cell studies revealed higher initial Coulombic efficiency and specific capacities with increasing carbon coating time. However, solid electrolyte interphase (SEI) investigations using XPS showed that the coated and uncoated samples have very similar characteristics, suggesting that the SEI may only play a minor role in enhancing the performance of Si@C. Full-cell evaluation of the Si electrodes was consistent with half-cell results relating to performance and SEI properties, further supporting the conclusion that electronic and ionic percolation, enabled by effective electrode manufacturing, are the dominant factors contributing to the favorable performance of Si@C.

25 ENERGY STORAGE↗
DOE OSTI2022

Understanding slurry formulations to guide solution-processing of solid electrolytes

Scalable processing of thin solid electrolytes is crucial for engineering solid-state batteries with practical energy densities. To leverage existing battery production infrastructure, pathways for solution processing of solid electrolyte films must be investigated. Here, roll-to-roll compatible film preparation of aluminum-doped lithium lanthanum zirconate oxide was studied. Four slurry configurations accounting for different solvent properties and solid loadings were evaluated to investigate the ternary interactions within the dispersions. Rheological and coating stability analyses were carried out on the processed slurries. The analysis and characterization indicated that improved component interactions within the ethanol/toluene system result in homogenized distribution of the particles, binder, and plasticizer, and enable the extraction of free-standing thin films with thicknesses of 20 μm and large area (>15 in. 2 ). The drawbacks and opportunities of several protocols for high temperature sintering of the dried green films were investigated. This study highlights the importance of engineering dispersions during the development of processing protocols for solid electrolytes and provides guidelines for the best practices that can be leveraged for solution processing–based fabrications for a wide range of solid electrolyte materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Quantifying Lithium Ion Exchange in Solid Electrolyte Interphase (SEI) on Graphite Anode Surfaces

Solid Electrolyte Interphase (SEI) has been identified as the most important and least understood component in lithium-ion batteries. Despite extensive studies in the past two decades, a few mysteries remain: what is the chemical form of and degree of mobility of Li + in the interphase? What fraction of Li + is permanently immobilized in the SEI, while the rest are still able to participate in the cell reactions via the ion-exchange process with Li + in the electrolyte? This study attempted to answer, in part, these questions by using 6 Li and 7 Li-isotopes to label SEIs and electrolytes, and then quantifying the distribution of permanently immobilized and ion-exchangeable Li + with solid-state NMR and ToF-SIMS. The results showed that the majority of Li + were exchanged after one SEI formation cycle, and a complete exchange after 25 cycles. Ion exchange by diffusion based on concentration gradient in the absence of applied potential also occurred simultaneously. This knowledge will provide a foundation for not only understanding but also designing better SEIs for future battery chemistries.

25 ENERGY STORAGE↗
DOE OSTI2025

Probing the Effect of Electrode Thermodynamics on Reaction Heterogeneity in Thick Battery Electrodes

Thick electrodes present a viable strategy for enhancing energy density and reducing manufacturing costs of lithium-ion batteries. However, reaction heterogeneity during cycling compromises their rate capability and cycle life. While this nonuniformity is commonly attributed to sluggish charge transport, it is demonstrated here that the thermodynamic properties of the electrode material play an equally critical role. Through combined X-ray fluorescence microscopy and absorption near-edge structure spectroscopy, reaction distributions in LiFePO 4 (LFP) and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC) thick electrodes with matched porosity and tortuosity are compared. LFP electrodes develop pronounced depth-oriented state-of-charge (SOC) gradients that worsen with increasing discharge rates, whereas NMC maintains much more uniform SOC distributions under such conditions. This difference originates from their distinct SOC dependence of equilibrium potentials and is quantifiable through a dimensionless “reaction uniformity” number. Intriguingly, LFP thick electrodes also exhibit lateral SOC variations that strengthen during slow discharge. In conclusion, the enhanced reaction uniformity in NMC correlates with better active material utilization and slower capacity fade than LFP, highlighting electrode thermodynamics as a key design consideration for thick electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Probing the thermodynamics and kinetics of ethylene carbonate reduction at the electrode–electrolyte interface with molecular simulations

Understanding the formation of the solid-electrolyte interphase (SEI) in lithium-ion batteries (LIBs) is an ongoing area of research due to its high degree of complexity and the difficulties encountered by experimental studies. Herein, we investigate the initial stage of SEI growth, the reduction reaction of ethylene carbonate (EC), from both a thermodynamic and kinetic approach with theory and molecular simulation. We employed both the potential distribution theorem (PDT) and the SMD implicit solvent model to EC solvation for the estimation of reduction potentials of Li$^+$, EC, and Li$^+$-solvating EC (s-EC), as well as reduction rate constants of EC and s-EC. We find that solvation effects greatly influence these quantities of interest, particularly the Li$^+$/Li reference electrode potential in EC solvent. Further, we also compute the inner- and outer-sphere reorganization energies for both EC and s-EC at the interface of liquid EC and a hydroxyl-terminated graphite surface, where total reorganization energies are predicted to be 76.6 and 88.9 kcal/mol, respectively. With the computed reorganization energies, we estimate reduction rate constants across a range of overpotentials and show that EC has a larger electron transfer rate constant than s-EC at equilibrium, despite s-EC being more thermodynamically favorable. Furthermore, this manuscript demonstrates how ion solvation effects largely govern the prediction of reduction potentials and electron transfer rate constants at the electrode-electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Numerical investigation of liquid wall ablation in inertial fusion energy chambers

This paper presents a novel approach for modeling liquid wall ablation in liquid wall-protected inertial fusion energy (IFE) chambers. These systems are promising candidates for the implementation of fusion technology, yet significant gaps remain in understanding the underlying physical processes and their implications for design. Following target ignition, a portion of the fusion energy is released as x-rays, which deposit their energy into an array of liquid jets, leading to partial vaporization. Accurately modeling this heat deposition and vaporization process remains challenging due to the complex geometries typical of (pre-conceptual) IFE chamber designs. Furthermore, the subsequent expansion of vaporized material into the chamber’s vacuum environment poses difficulties for conventional CFD methods based on continuum assumptions, which can lead to significant inaccuracies. To address some aspects of these challenges, this work introduces a ray-tracing-based methodology to map the spatial distribution of ablated material in liquid wall-protected systems. In addition, a vacuum-tracking scheme is developed to extend the applicability of an OpenFOAM-based solver to gas dynamics in rarefied environments. The proposed approach has been verified through numerical benchmarks and applied to a practical case involving the HYLIFE-II (High Yield Lithium Injection Fusion Energy) chamber. The methodology advances the modeling capabilities for liquid wall-protected IFE systems and provides valuable tools to support their design and optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Lithium-Ion Batteries with Safer Current Collectors

The US Department of Energy’s Oak Ridge National Laboratory and Soteria Battery Innovation Group collaborated to develop a metallized polymer film as a current collector for lithium-ion batteries and design slit patterns for electrodes to improve battery safety. The metallized polymer film serves as a fuse that will break under high temperature resulting from a short circuit. Consequently, the short circuit will be broken and the heat generated from the short circuit will be alleviated to avoid thermal runaway. The electrodes with slit patterns are expected to be broken into small segments upon mechanical impact, which can isolate the damaged electrodes from the rest. Thus, the heat generation associated with the mechanical impact will be reduced, along with the likelihood of thermal runaway. This effort aimed to improve lithium-ion battery safety by replacing traditional metal foils with metallized polymer films as current collector and introducing slit patterns to battery electrodes. The metallized polymer films were polyethylene terephthalate with a thin metal (aluminum for cathodes and copper for anodes) coating on both sides. Slit patterns with various geometries and dimensions were designed via simulation. Temperature distribution on cells with electrodes with and without slit patterns was also simulated via nemerical modeling. Electrodes on traditional metal foils and metallized polymer films were coated via a pilot-scale slot-die coater at the US Department of Energy Battery Manufacturing Facility at Oak Ridge National Laboratory. The electrodes were calendered to 35% porosity and punched out with and without slit patterns. Pouch cells were assembed with the electrodes inside a dry room for electrochemical and safety testing. Electrodes coated on metallized polymer films exhibited comparable electrochemical performance to their counterparts coated on traditional metal foils. They also showed improved safety in nail penetration and indentation tests.

25 ENERGY STORAGE↗
DOE OSTI2022

High-efficiency, anode-free lithium–metal batteries with a close-packed homogeneous lithium morphology

Anode-free lithium–metal batteries (LMBs) are ideal candidates for high-capacity energy storage as they eliminate the need for a conventional graphite electrode or excess lithium–metal anode. Current anode-free LMBs suffer from low Coulombic efficiency (CE) due to poor lithium stripping efficiency. Advanced electrolyte development is a promising route to maximize lithium plating and stripping CE and minimize capacity fade. However, a poor understanding of the mechanisms by which advanced electrolytes improve performance hampers progress in the practical development of anode-free LMBs. Here, we use synchrotron techniques and other tools to analyze the influence of three commercially available electrolytes on the composition, heterogeneity, kinetics, morphology, and electrochemistry of anode-free LMBs. Advanced electrolytes improve the electrochemical performance of anode-free LMBs by forming much denser and better-packed Li morphologies on a Cu current collector than on the conventional electrolyte. Li plates uniformly over the electrode area with the advanced electrolytes rather than in a few active sites. Inactive crystalline Li with heterogeneous distribution dominates the capacity degradation of anode-free cells, especially with the conventional electrolyte, indicating that reducing the amount of “dead” crystalline Li will significantly improve the cycling stability of anode-free cells. Finally, the understanding of the Li plating and stripping process obtained from this work will accelerate the development of anode-free LMBs with high efficiency.

25 ENERGY STORAGE↗
DOE OSTI2020

Insights into the Cathode–Electrolyte Interphases of High-Energy-Density Cathodes in Lithium-Ion Batteries

Here we present a comprehensive study of cycled high-Ni (LiNi 1–x M x O 2 , M = metals), Li-rich (Li 1+x Mn y M 1–x–y O 2 ), and high-voltage spinel (LiMn 1.5 Ni 0.5 O 4 ) electrodes with time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy in conjunction with electrochemical techniques to better understand their evolving cathode–electrolyte interphase structure during cycling. TOF-SIMS provides fragment-specific information regarding the surface film content for each of the electrodes. High-Ni cathodes show thick surface films initially containing Li 2 CO 3 , later developing oxidized organic carbonates throughout cycling. Li-rich electrode surface films develop strong characteristics during their first activation cycles, where released O 2 oxidizes organic carbonates to form polymeric carbons and decomposes LiPF 6 . High-voltage spinel electrodes operate outside the standard electrolyte stability window, generating reactive oxidized electrolyte species that further decompose LiPF 6 . The distribution and concentration of these different chemical fragments measured by TOF-SIMS are finally summarized by color-coded high-resolution images of cycled high-Ni, Li-rich, and high-voltage spinel electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

High Interfacial-Energy and Lithiophilic Janus Interphase Enables Stable Lithium Metal Anodes

The stability of solid electrolyte interphase (SEI) layers is critical for developing lithium (Li) metal batteries. However, the fabrication of stable SEI layers is plagued by un-controlled structures, properties, and functions. In this work a controllable design of an ordered LiF-rich and lithiophilic hybrid Janus interphase (LiF-HJI) is reported using organic fluorination reagent as a functional SEI precursor. The LiF-HJI with a lower crystalline LiF layer and an upper Li organosulfide layer provides high interfacial energy with the Li metal and strong Li-ion affinity, allows homogenous Li-ion distribution, fast and uniform Li-ion transport, and excellent mechanical and passivation properties, enabling stable Li metal anodes under harsh conditions, such as high deposition capacities (6 mA h cm -2 ), current densities (10 mA cm -2 ), and rates (5 C). Stable LiF-HJI@Li greatly improves cycling stability and capacity retention (80.1% after 300 cycles) of Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 cells at a commercial-level areal capacity (≈4.2 mA h cm -2 ). Even under a lean-electrolyte condition of 3 g Ah -1 , 80% capacity retention can be maintained after 100 cycles, demonstrating excellent cycling performance under such harsh conditions.

25 ENERGY STORAGE↗