Search NASA⌕ Search

SEARCH · Search NASA

Results for “MADe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2025

Erosion Behavior of Ti-hBN Multifunctional Coatings in A Custom-Made Planetary Test Rig at Extreme Lunar Temperatures

Spacecraft landings and takeoffs on the lunar surface, along with extreme temperature variations between day and night (-196 to 150° C), cause high-velocity dust impacts and erosion, resulting in the premature failure of structures. Ti/2 vol% hBN coatings were deposited using atmospheric (APS) and vacuum plasma spray (VPS) using cryo-milled powder feedstock to protect the structural components. The erosion performance of coatings at extreme lunar temperature regimes (-150 to 150° C) was evaluated in a custom-made planetary erosion test rig (PETR) at low (50 mph) and high impact velocities (250 mph). The mass loss of VPS coatings was reduced by 50% compared to the APS coatings and 40% compared to the Ti6Al4V substrate. The cryogenic temperature induces brittleness in the material, rendering it susceptible to extreme conditions of material loss. The particle impact-deformation behavior was captured using a high-speed camera to study the erosion mechanism. This analysis revealed chipping in substrates and brittle APS coatings, while particles rebounding and embedding were observed in VPS coatings. Energy calculations, aided by particle trajectory tracking from the high-speed camera, have conclusively shown that VPS coatings absorb 5–10% more energy than APS coatings during erosion tests. A modified erosion index was developed incorporating the fracture toughness and temperatures. New erosion models for brittle and ductile target materials are proposed for developing erosion-resistant material systems.

Abhijith Kunneparambil Sukumaran↗
DOE OSTI2020

Regrowth method for fabricating wide-bandgap transistors, and devices made thereby

Methods are provided for fabricating a HEMT (high-electron-mobility transistor) that involve sequential epitaxial growth of III-nitride channel and barrier layers, followed by epitaxial regrowth of further III-nitride material through a window in a mask layer. The regrowth takes place on the barrier layer, only in the access region or regions. Devices made according to the disclosed methods are also provided.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Additive manufacturing methods using aluminum-rare earth alloys and products made using such methods

Described herein are additive manufacturing methods and products made using such methods. The alloy compositions described herein are specifically selected for the additive manufacturing methods and provide products that exhibit superior mechanical properties as compared to their cast counterparts. Using the compositions and methods described herein, products that do not exhibit substantial coarsening, such as at elevated temperatures, can be obtained. The products further exhibit uniform microstructures along the print axis, thus contributing to improved strength and performance. Additives also can be used in the alloys described herein.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Additive manufacturing methods using aluminum-rare earth alloys and products made using such methods

Described herein are additive manufacturing methods and products made using such methods. The alloy compositions described herein are specifically selected for the additive manufacturing methods and provide products that exhibit superior mechanical properties as compared to their cast counterparts. Using the compositions and methods described herein, products that do not exhibit substantial coarsening, such as at elevated temperatures, can be obtained. The products further exhibit uniform microstructures along the print axis, thus contributing to improved strength and performance. Additives also can be used in the alloys described herein.

Plotkowski, Alex J.↗
DOE OSTI2022

American-Made Challenges: FLoating Offshore Wind ReadINess (FLOWIN) Prize

The goal of this prize is to establish a pathway to cost-effective domestic manufacture and deployment of gigawatt-scale floating wind farms in U.S. waters. Toward realization of that goal, the prize will: (1) incentivize and support further development of technically and economically viable floating wind platform structures that can support 12-MW-rated or larger wind turbines in water depths over 40 meters. (2) incentivize the creation of a supply chain that will enable domestic on-site manufacturing of floating offshore wind farm components utilizing a skilled and trained workforce. (3) promote awareness of the importance and principles of inclusion and environmental justice.

American-Made Challenges↗
DOE OSTI2020

3D Hybrid Nanofiber Aerogels Combining with Nanoparticles Made of a Biocleavable and Targeting Polycation and MiR‐26a for Bone Repair

Abstract The healing of large bone defects represents a clinical challenge, often requiring some form of grafting. 3D nanofiber aerogels could be a promising bone graft due to their biomimetic morphology and controlled porous structures and composition. miR‐26a has been reported to induce the differentiation of bone marrow‐derived mesenchymal stem cells (BMSCs) and facilitate bone formation. Introducing miR‐26a with a suitable polymeric vector targeting BMSCs could improve and enhance the functions of 3D nanofiber aerogels for bone regeneration. Herein, the comb‐shaped polycation (HA–SS–PGEA) is first developed, carrying a targeting component, biocleavable groups, and short ethanolamine (EA)‐decorated poly(glycidyl methacrylate) (PGMA) (abbreviated as PGEA) arms as miR‐26a delivery vector. Thereafter, the cytotoxicity and transfection efficiency of this polycation and cellular response to miR‐26a‐incorporated nanoparticles (NPs) are assessed in vitro. HA–SS–PGEA exhibits a stronger ability to transport miR‐26a and exert its functions than the gold standard polyethyleneimine (PEI) and low‐molecular‐weight linear PGEA. The efficacy of HA–SS–PGEA/miR‐26a NPs loaded 3D hybrid nanofiber aerogels showing a positive effect on the cranial bone defect healing is finally examined. Together, the combination of 3D nanofiber aerogels and functional NPs consisting of a biodegradable and targeting polycation and therapeutic miRNA could be a promising approach for bone regeneration.

Li, Ruiquan↗
DOE OSTI2022

Not All Aggregates Are Made the Same: Distinct Structures of Solution Aggregates Drastically Modulate Assembly Pathways, Morphology, and Electronic Properties of Conjugated Polymers

Abstract Tuning structures of solution‐state aggregation and aggregation‐mediated assembly pathways of conjugated polymers is crucial for optimizing their solid‐state morphology and charge‐transport property. However, it remains challenging to unravel and control the exact structures of solution aggregates, let alone to modulate assembly pathways in a controlled fashion. Herein, aggregate structures of an isoindigo–bithiophene‐based polymer (PII‐2T) are modulated by tuning selectivity of the solvent toward the side chain versus the backbone, which leads to three distinct assembly pathways: direct crystallization from side‐chain‐associated amorphous aggregates, chiral liquid crystal (LC)‐mediated assembly from semicrystalline aggregates with side‐chain and backbone stacking, and random agglomeration from backbone‐stacked semicrystalline aggregates. Importantly, it is demonstrated that the amorphous solution aggregates, compared with semicrystalline ones, lead to significantly improved alignment and reduced paracrystalline disorder in the solid state due to direct crystallization during the meniscus‐guided coating process. Alignment quantified by the dichroic ratio is enhanced by up to 14‐fold, and the charge‐carrier mobility increases by a maximum of 20‐fold in films printed from amorphous aggregates compared to those from semicrystalline aggregates. This work shows that by tuning the precise structure of solution aggregates, the assembly pathways and the resulting thin‐film morphology and device properties can be drastically tuned.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer

The effect of polymer infiltration and pyrolysis (PIP) cycles with polycarbosiloxane on the microstructure, air leak rate, and properties of SiC composites manufactured by a combination of binder jet 3D printing and PIP are reported. The density, Young’s modulus and flexural strength of disk-shaped components increased with the number of PIP cycles. In the case of density, it increased from 2.05 g/cm 3 in one PIP cycle to 2.33 g/cm 3 after three PIP cycles, while values of flexural strength and Young’s modulus at room temperature after three PIP cycles reached 66.8 ± 2.5 MPa and 69.5 ± 2.8 GPa, respectively. Conversely, the air leak rate was found to decrease with number of PIP cycles, and it reached a value of 4 mbar-liter/s after three cycles. The instantaneous coefficient of thermal expansion of the composite was found to change minimally with the number of PIP cycles and had a value of 4 ± 1.2 ppm/°C between 200°C and 1,000°C. Thermal conductivity was found to increase with number of PIP cycles and to decrease with temperature. For example, after 3 PIP cycles it was found to change from 6.72 ± 0.08 to 6.98 ± 0.08 W/mK at 25°C and 7.36 ± 0.08 to 7.96 ± 0.08 W/mK at 300°C. These values were lower than those of crystalline SiC because of the amorphous nature of the matrix and the presence of pores and cracks.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Boron-Made N 2 : Realization of a B$\equiv$B Triple Bond in the B 2 Al 3 – Cluster

Until now, all B≡B triple bonds have been achieved by adopting two ligands in the L→B≡B←L manner. Herein, we report an alternative route of designing the B≡B bonds based on the assumption that by acquiring two extra electrons, an element with the atomic number Z can have properties similar to those of the element with the atomic number Z + 2. Specifically, we show that due to the electron donation from Al to B, the negatively charged B≡B kernel in the B 2 Al 3 – cluster mimics a triple N≡N bond. Comprehensive computational searches reveal that the global minimum structure of B 2 Al 3 – exhibits a direct B–B distance of 1.553 Å, and its calculated electron vertical detachment energies are in excellent agreement with the corresponding values of the experimental photoelectron spectrum. Chemical bonding analysis revealed one σ and two π bonds between the two B atoms, thus confirming a classical textbook B≡B triple bond, similar to that of N 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanisms of Interface Cleaning in Heterostructures Made from Polymer‐Contaminated Graphene

Abstract Heterostructures obtained from layered assembly of 2D materials such as graphene and hexagonal boron nitride have potential in the development of new electronic devices. Whereas various materials techniques can now produce macroscopic scale graphene, the construction of similar size heterostructures with atomically clean interfaces is still unrealized. A primary barrier has been the inability to remove polymeric residues from the interfaces that arise between layers when fabricating heterostructures. Here, the interface cleaning problem of polymer‐contaminated heterostructures is experimentally studied from an energy viewpoint. With this approach, it is established that the interface cleaning mechanism involves a combination of thermally activated polymer residue mobilization and their mechanical actuation. This framework allows a systematic approach for fabricating record large‐area clean heterostructures from polymer‐contaminated graphene. These heterostructures provide state‐of‐the‐art electronic performance. This study opens new strategies for the scalable production of layered materials heterostructures.

Huang, Zhujun↗
DOE OSTI2025

Ionic‐Liquid Free and Flexible Transistors Made of 2D Material Inks

The development of thin-film transistors (TFTs) using 2D materials is crucial for enabling scalable, low-cost, and flexible electronics. Currently, 2D TFTs with the highest performance have been achieved by using ionic-liquid gating (ILG), a technique suited for proof-of-concept studies. However, ILG suffers from slow switching speeds, temperature sensitivity, poor long-term stability, and integration challenges, making it unsuitable for practical use. Moreover, typical fabrication methods for 2D TFTs involve harsh conditions such as strong acids or high temperatures (>300 °C), limiting integration with flexible substrates. This work provides the first demonstration of an ILG-free, all-2D-material TFT fabricated onto a flexible substrate. Water-based graphene and hexagonal boron nitride (h-BN) inks are printed to deposit the electrodes and dielectric layers, respectively. The MoS 2 channel is produced via supramolecular interfacial self-assembly, yielding uniform, monolayer-rich films transferable to rigid and flexible substrates. The resulting TFTs operate below 3 V, exhibit negligible leakage current, and achieve field-effect mobilities up to 0.46 cm 2 V −1 s −1 (rising to 2.47 cm 2 V −1 s −1 with silver electrodes) measured under ambient conditions, while maintaining excellent mechanical flexibility. This work establishes a low-cost and scalable solution-processable platform for flexible electronics based on 2D materials that match requirements for practical applications.

2D materials↗
DOE OSTI2022

Understanding the role of segmentation on process-structure–property predictions made via machine learning

Here, the present study investigated the effect of porosity surface determination methods on performance of machine learning models used to predict the tensile properties of AlSi10Mg processed by laser powder bed fusion from micro-computed tomography data. Machine learning models applied in this work include support vector machines, neural networks, decision trees, and Bayesian classifiers. The effects of isosurface thresholding and local gradient approaches for porosity segmentation, as well as image filtering schemes, on model precision were evaluated for samples produced under differing levels of global energy density.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sol–gel synthesis of iodosodalite precursors and subsequent consolidation with a glass binder made from oxides and sol–gel routes

Radioiodine accumulates in aqueous solutions and off-gas streams during nuclear fuel reprocessing due to its solubility in aqueous solutions and volatility, respectively. Additionally, radioiodine is highly mobile in geological environments and iodine-129 has been found to be one of the largest long-term contributors to chronic dose to humans in scenarios of radionuclide migration from geological repositories. Most of the radioiodine can be captured during fuel reprocessing in off-gas streams using solid sorbents and scrubbing solutions. Once iodine is captured, it must be stored in a durable form for eventual disposal. Iodosodalite has been investigated as a waste form for radioiodine, however these synthesis processes typically result in mixed products and iodine volatilization during consolidation. Therefore, this paper proposes a novel approach to synthesizing iodosodalite utilizing a sol-gel method. This method was chosen to lower processing temperatures and improve product yield. Preliminary experiments conducted to determine the viability of this synthetic method are presented. Additionally, consolidation of sol-gel derived iodosodalite with a glass-binder was explored using three different methods: 1) incorporating the glass-binder during gel preparation using alkoxide precursors; 2) separately preparing the glass binder using a sol-gel method; and 3) separately preparing the glass-binder using a melt-quench technique. Glass-bonded iodosodalite was successfully synthesized using these novel sol-gel approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tasting nuclear pasta made with classical molecular dynamics simulations

Nuclear clusters or voids in the inner crust of neutron stars were predicted to have various shapes collectively nicknamed nuclear pasta. Furthermore, the recent review by López, Dorso and Frank summarized their systematic investigations into properties especially the morphological and thermodynamical phase transitions of the nuclear pasta within a Classical Molecular Dynamics model, providing further stimuli to find more observational evidences of the predicted nuclear pasta in neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Microwave synthesis of single-phase nanoparticles made of multi-principal element alloys

In this work, metal nanoparticles of multi-principal element alloys (MPEA) with a single crystalline phase have been synthesized by flash heating/cooling of nanosized metals encapsulated in micelle vesicles dispersed in an oil phase (e.g., cyclohexane). Flash heating is realized by selective absorption of a microwave pulse in metals to rapidly heat metals into uniform melts. The oil phase barely absorbs microwave and maintains the low temperature, which can rapidly quench the high-temperature metal melts to enable the flash cooling process. The precursor ions of four metals, including Au, Pt, Pd, and Cu, can be simultaneously reduced by hydrazine in the aqueous solution encapsulated in the micelle vesicles. The resulting metals efficiently absorb microwave energy to locally reach a temperature high enough to melt themselves into a uniform mixture. The duration of microwave pulse is crucial to ensure the reduced metals mix uniformly, while the temperature of oil phase is still low to rapidly quench the metals and freeze the single-phase crystalline lattices in alloy nanoparticles. The microwave-enabled flash heating/cooling provides a new method to synthesize single-phase MPEA nanoparticles of many metal combinations when the appropriate water-in-oil micelle systems and the appropriate reduction reactions of metal precursors are available.

36 MATERIALS SCIENCE↗