Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC DOMAIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Anisotropic domains and antiferrodistortive-transition controlled magnetization in epitaxial manganite films on vicinal SrTiO 3 substrates

We studied the microstructural evolution and magnetism of ferroelastic La 0.9 Sr 0.1 MnO 3 (LSMO) epitaxial thin films grown on SrTiO 3 (001) substrates with different miscut angles. The substrate miscut angle plays a critical role in controlling the in-plane magnetic anisotropy. The microscopic origin of such magnetic anisotropy is attributed to the formation of anisotropic stripe domains along the surface step terraces. The magnetization in the LSMO films was found to be selectively modulated by the antiferrodistortive phase transition of the SrTiO 3 substrate. This phenomenon has been qualitatively explained by a strain modified Stoner–Wohlfarth model. We conclude that the magnetization modulation by the SrTiO 3 phase transition depends on h, the ratio of applied magnetic field to the saturation field. Such modulation is only visible with h < 1. The established domain microstructure–anisotropy–magnetism correlation in manganite films can be applied to a variety of complex oxide thin films on vicinal substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Itinerant ferromagnetism in van der Waals Fe 5 – x Ge Te 2 crystals above room temperature

Two-dimensional (2D) van der Waals (vdW) magnets have recently attracted increasing attention, as they provide a novel system for exploring 2D magnetism. However, intrinsic ferromagnetism in 2D systems has almost exclusively been observed at low temperatures, limiting their technological relevance. Fe N Ge Te 2 ( N = 3 , 4, and 5) systems are currently becoming the most attractive 2D vdW materials due to their relatively high Curie temperatures and large saturation magnetization. However, the nature of their complex yet intriguing magnetic behaviors is still unclear, in part due to the multiple inequivalent iron sites and iron vacancies. In this study, we show evolution of magnetic ordering transitions in Fe 5 – x Ge Te 2 with high Curie temperature and a strong saturation magnetization using photoemission electron microscopy and transport measurements. At 275 K, the ferromagnet transitions to a ferrimagnet, and below 110 K transitions to a state with glassy clusters. These are evidenced from temperature-dependent magnetic stripe domain evolution and anisotropic magnetoresistance measurements. Our findings show a clear magnetic ground state of Fe 5 – x Ge Te 2 at room temperature which signals that Fe 5 – x Ge Te 2 system is a very promising candidate for spintronic devices and provides a material design pathway to further increase the Curie temperature and saturation moments in vdW ferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magnetic and Superconducting Properties of the Heterogeneous Layered Structures V/Fe{sub 0.7}V{sub 0.3}/V/Fe{sub 0.7}V{sub 0.3}/Nb and Nb/Ni{sub 0.65(0.81)}Cu{sub 0.35(0.19)}

The heterogeneous ferromagnetic–superconducting layered heterostructures V/Fe{sub 0.7}V{sub 0.3}/V/Fe{sub 0.7}V{sub 0.3}/Nb and Nb/Ni{sub 0.65(0.81)}Cu{sub 0.35(0.19)}, which contain magnetic clusters and ferromagnetic domains, are studied. The magnetic and superconducting properties of the structures depend on the magnetic-layer thickness, the magnetic field, and the time elapsed from structure preparation. We detected the interaction of clusters with a domain structure, diamagnetism and magnetization reversal of the magnetic layer during the superconducting transition in a ferromagnetic–superconducting heterostructure, and a superconducting transition in the magnetic layer. The magnetic and resistive properties of the heterostructures changed in several weeks and months.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Spin-wave directional anisotropies in antiferromagnetic Ba 3 NbFe 3 Si 2 O 14

Ba 3 NbFe 3 Si 2 O 14 (langasite) is structurally and magnetically single-domain chiral with the magnetic helicity induced through competing symmetric exchange interactions. Using neutron scattering, we show that the spin waves in antiferromagnetic langasite display directional anisotropy. On applying a time-reversal symmetry breaking magnetic field along the c axis, the spin-wave energies differ when the sign is reversed for either the momentum transfer ±$\vec {Q}$ or applied magnetic field ±μ 0 H. When the field is applied within the crystallographic ab plane, the spin-wave dispersion is directionally isotropic and symmetric in ±μ 0 H. However, a directional anisotropy is observed in the spin-wave intensity. Finally, we discuss this directional anisotropy in the dispersion in langasite in terms of a field-induced precession of the dynamic unit cell staggered magnetization resulting from a broken twofold symmetry. Directional anisotropy, often referred to as nonreciprocal responses, can occur in antiferromagnetic phases in the absence of the Dzyaloshinskii-Moriya interaction or other effects resulting from spin-orbit coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Theory and phase-field simulations of electrical control of spin cycloids in a multiferroic

Cycloidal spin orders are common in multiferroics. One of the prototypical examples is BiFeO 3 (BFO) which shows a large polarization and a cycloidal antiferromagnetic (AFM) order at room temperature. Here, we employ Landau theory and phase-field simulations to analyze the coupled switching dynamics of polarization and cycloidal AFM orders in BFO. We identify 14 types of transitional spin structures between two cycloids and nine electric-field-induced spin switching paths. We demonstrate the electric-field-induced rotation of wave vectors of the cycloidal spins and discover two types of cycloidal spin switching dynamics: fast local spin flips and slow rotation of wave vectors. Also, we construct roadmaps to achieve the switching between any two spin cycloids through multistep applications of electric fields. Furthermore, this paper provides a theoretical framework for the phenomenological description of spin cycloids and a fundamental understanding of the switching mechanisms to achieve electrical control of magnetic orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Inverse Biot–Savart Optimization for Superconducting Accelerator Magnets

Superconducting (SC) magnets for accelerator concepts are often synthesized by numerically optimizing magnetic field waveforms, a process that requires a subsequent solution of a constrained inverse problem to identify suitable SC magnet windings. When the desired field distribution is intuitive, the inverse process is facilitated by seeding preconceived coil distributions into design optimization methods for refinement. With more complex magnetic field distributions, an initial design may be unknown, and topology optimization tools are required to synthesize current distributions without a priori guidance from a subject matter expert. In this work, we develop a constrained inverse Biot-Savart topology optimization methodology that synthesizes optimal distributions of current density in racetrack-like SC coils. The problem structure is exploited through a computationally efficient quadratic programming formulation, and the method is applied to recently published magnetic field waveforms for a recirculating proton phase shifter, a proton therapy gantry, and dipole magnets with sharp field transitions. The method and results herein identify novel winding configurations that can help magnet designers bring accelerator concepts to fruition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Anomalous and planar Hall effects in Co 1−x Ho x thin films across the magnetic sublattice compensation temperature

Metallic amorphous ferrimagnets derived from alloying 3d transition metals with 4f-electron rare earths host fascinating effects of compensation between the 3d and 4f magnetic sublattices. Here, a detailed study of the anisotropic magnetoresistance (Δρ xx ), planar Hall effect (ρ xy PHE ), and anomalous Hall effect (ρ xy AHE ) is reported on a series of Co 1−x Ho x thin films over a wide field–temperature (H–T) phase space. Close to the magnetic compensation temperature, the ρ xy AHE –H loops show a double sign reversal and signatures of spin-flop transition at higher fields. The Δρ xx and ρ xy PHE also display strong deviations from the classical angular dependence seen in soft ferromagnets like permalloy as the angle ϕ between in-plane current and magnetic field is scanned from 0 to 2π. It is argued that the non-zero orbital angular momentum of Ho ions in the lattice and stabilization of bubble domains below magnetic saturation may be responsible for such features. Direct imaging of magnetic textures with x-ray photoelectron microscopy shows the formation of stripe domain patterns in the regime of sublattice compensation. Such stripes are likely to transform into magnetic bubbles before full saturation is reached in a large magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Size analysis of sub-resolution objects by Kerr microscopy

Here, a Kerr microscopy method for the quantitative measurement of the size of magnetic objects that are smaller than the resolution limit is proposed. It can be applied to domain walls, bubble domains and magnetic skyrmion-bubble hybrid microstructures. The method is based on the integral contrast, determined by proper line scans across the object, which turns out to be independent from the resolution of the microscope after normalization to the maximum domain contrast.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Distribution of Bound and Free Water in Anatomical Fractions of Pine Residues and Corn Stover as a Function of Biological Degradation

Biomass quality is influenced by water’s abundance, distribution, and status in relation to other chemical species within the polymer matrix. Water interacts with polymers that make up the cell walls, and these interactions govern the physical and chemical changes that occur during the storage and preprocessing of biomass feedstocks. Time-domain nuclear magnetic resonance (TD-NMR) was employed to explore variations in the physical constraints of water within the lignocellulosic microstructure in distinct anatomical fractions of biomass and as a function of biological degradation. The Carr–Purcell–Meiboom–Gill sequence, when combined with knowledge of the chemical composition and physical structure of pine residues and corn stover anatomical fractions, gives an accurate measurement of the bound and free water. In this work, the impacts of storage and biological degradation were investigated to elucidate changes in the status and distribution of water within distinct plant tissues. We also investigate how degradation during storage affects water interactions in different pine residues (e.g., bark, branch, and needle) and corn stover (e.g., cob, leaf, and stalk) anatomical fractions using transverse relaxation times (T2). As demonstrated herein, TD-NMR provides quantitative data on lignocellulosic biomass–water interactions within anatomical fractions, which can further aid in the investigation of preprocessing effects on feedstock quality. Our findings suggest that biological heating enhances biomass–water interactions at the cellular and macromolecular scale. In addition, analysis of three-dimensional scanning electron microscopy reconstructions indicates that surface roughness wavelengths align with microscale roughness, suggesting that pine forestry residue and corn stover particles have primarily hydrophobic exterior surfaces. Furthermore, this study offers multiscale insights into understanding the microstructure, wettability, and chemical environment that dictate diffusion, enzyme access, and recalcitrance of lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2019

161 Dy Time‐Domain Synchrotron Mössbauer Spectroscopy for Investigating Single‐Molecule Magnets Incorporating Dy Ions

Abstract Time‐domain synchrotron Mössbauer spectroscopy (SMS) based on the Mössbauer effect of 161 Dy has been used to investigate the magnetic properties of a Dy III ‐based single‐molecule magnet (SMM). The magnetic hyperfine field of [Dy(Cy 3 PO) 2 (H 2 O) 5 ]Br 3 ⋅2 (Cy 3 PO)⋅2 H 2 O⋅2 EtOH is with B 0 =582.3(5) T significantly larger than that of the free‐ion Dy III with a 6 H 15/2 ground state. This difference is attributed to the influence of the coordinating ligands on the Fermi contact interaction between the s and 4f electrons of the Dy III ion. This study demonstrates that 161 Dy SMS is an effective local probe of the influence of the coordinating ligands on the magnetic structure of Dy‐containing compounds.

Scherthan, Lena↗
DOE OSTI2018

Electric current control of creation and annihilation of sub-100 nm magnetic bubbles examined by full-field transmission soft X-ray microscopy

The effect of electric current pulses on a sub-100 nm magnetic bubble state in a symmetric Pt/Co multilayer was directly observed using a full-field transmission soft X-ray microscope (MTXM). Field-induced evolution of the magnetic stripe domains into isolated bubbles with their sizes down to 100 nm was imaged under varying external magnetic fields. Electric current pulses were then applied to the created magnetic bubbles, and it was observed that the bubbles could be either created or annihilated by the current pulse depending on the strength of applied magnetic field. The results suggest that the Joule heating plays a critical role in the formation and/or elimination of the bubbles and skyrmions. Finally, the schematic phase diagram for the creation and annihilation of bubbles is presented, suggesting an optimized scheme with the combination of magnetic field and electric current necessary to utilize skyrmions in the practical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Low-Field Nuclear Magnetic Resonance Characterization of Carbonate and Sandstone Reservoirs From Rock Spring Uplift of Wyoming

Laboratory measurements including gas (N 2 ) porosity and permeability, time-domain nuclear magnetic resonance, thin section, and scanning electron microscopy analysis were conducted to obtain petrographical and petrophysical descriptions of the Weber Sandstone and Madison Limestone at the Rock Spring Uplift, a potential carbon dioxide storage site in Southwestern Wyoming. The relationships between pore structures, such as pore geometry, pore-size distribution, pore network, and porosity/permeability are investigated. First, using thin sections combined with scanning electron microscopy for pore structures description, all samples are described in detail from the geological, petrographysical, and diagenetic viewpoint. Results show that within the Madison Limestone, pore types include intercrystalline, vuggy, moldic, or mixed (combination of all other pore types). Both moldic and vuggy pore types are associated with samples of high porosity and permeability. Nuclear magnetic resonance relaxation time distributions show either bimodal or multimodal distributions. Large relaxation time components are associated with samples with large pores, whereas small components are dominated by small pores. The T 2 geometric mean correlates well with gas permeability. Additionally, short-time diffusion coefficients (D) were measured by pulsed field gradient method using a series of gradient strengths. We found that diffusion coefficient distributions correlate with the corresponding T 2 distributions for macropores. By comparing the dominant peak position of T 2 distributions and their corresponding diffusion coefficient distributions, we predicted the surface relaxivity of different rock types. We found that surface relaxivities of Weber Sandstone samples can be well predicted, while for Madison Limestone samples, surface relaxivities are overestimated due to diffusive pore coupling effect.

58 GEOSCIENCES↗
DOE OSTI2020

Edge ICRF simulations in 3D geometry: From MHD equilibrium to coupling determination

We present in this work a consistent numerical scheme that allows the computation of 3D magnetic fields a nd 3D density profiles and their usage in ion cyclotron range of frequencies (ICRF) coupling simulations. We first utilize the PARVMEC code to compute the 3D free-boundary plasma equilibrium in the ideal magnetohydrodynamic (MHD) approximation. Since the PARVMEC solution is only defined within the last closed flux surface (LCFS), the magnetic field domain is extended to the scrape-off layer (SOL) via the BMW code, which computes a divergence-free magnetic field solution arising from the external conductors’ vacuum field a nd t he PARVMEC flux surface currents. This magnetic reconstruction is then used in the EMC3-EIRENE transport code in order to compute 3D density profiles. In the last step, the RAPLICASOL code is utilized to compute the ICRF antenna S-matrices resulting from the 3D density profiles. We exemplify this scheme for the ASDEX Upgrade tokamak. A new implementation of a curved model for the ASDEX Upgrade ICRF 2-strap antenna in RAPLICASOL allows simulations in realistic geometry, without any coordinate transformations.

Lopez, Graham↗
DOE OSTI2024

Topological Spin Textures in an Insulating van der Waals Ferromagnet

Generation and control of topological spin textures constitutes one of the most exciting challenges of modern spintronics given their potential applications in information storage technologies. Of particular interest are magnetic insulators, which due to low damping, absence of Joule heating and reduced dissipation can provide energy-efficient spin-textures platform. Here, it is demonstrated that the interplay between sample thickness, external magnetic fields, and optical excitations can generate a prolific paramount of spin textures, and their coexistence in insulating CrBr 3 van der Waals (vdW) ferromagnets. Using high-resolution magnetic force microscopy and large-scale micromagnetic simulation methods, the existence of a large region in T-B phase diagram is demonstrated where different stripe domains, skyrmion crystals, and magnetic domains exist and can be intrinsically selected or transformed to each-other via a phase-switch mechanism. Lorentz transmission electron microscopy unveils the mixed chirality of the magnetic textures that are of Bloch-type at given conditions but can be further manipulated into Néel-type or hybrid-type via thickness-engineering. The topological phase transformation between the different magnetic objects can be further inspected by standard photoluminescence optical probes resolved by circular polarization indicative of an existence of exciton-skyrmion coupling mechanism. The findings identify vdW magnetic insulators as a promising framework of materials for the manipulation and generation of highly ordered skyrmion lattices relevant for device integration at the atomic level.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Giant electron–phonon coupling of the breathing plane oxygen phonons in the dynamic stripe phase of $\hbox {La}_{1.67}\hbox {Sr}_{0.33}\hbox {NiO}_4$

Doped antiferromagnets host a vast array of physical properties and learning how to control them is one of the biggest challenges of condensed matter physics. La 1.67 Sr 0.33 NiO 4 (LSNO) is a classic example of such a material. At low temperatures holes introduced via substitution of La by Sr segregate into lines to form boundaries between magnetically ordered domains in the form of stripes. The stripes become dynamic at high temperatures, but LSNO remains insulating presumably because an interplay between magnetic correlations and electron–phonon coupling localizes charge carriers. Magnetic degrees of freedom have been extensively investigated in this system, but phonons are almost completely unexplored. We searched for electron–phonon anomalies in LSNO by inelastic neutron scattering. Giant renormalization of plane Ni–O bond-stretching modes that modulate the volume around Ni appears on entering the dynamic charge stripe phase. Other phonons are a lot less sensitive to stripe melting. Dramatic overdamping of the breathing modes indicates that dynamic stripe phase may host small polarons. We argue that this feature sets electron–phonon coupling in nickelates apart from that in cuprates where breathing phonons are not overdamped and point out remarkable similarities with the colossal magnetoresistance manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Néel domain walls with bistable chirality in a perpendicularly magnetized ferrimagnetic insulator

Field-free spin-orbit torque-driven domain wall motion in magnetic thin films with perpendicular magnetic anisotropy (PMA) requires the domain walls to have Néel character. Conventionally, Néel domain walls are stabilized by the Dzyaloshinskii-Moriya interaction (DMI) in ultrathin films. Here, in a europium iron garnet thin film with PMA and an additional uniaxial in-plane anisotropy, we demonstrate two bistable Néel domain wall states in the absence of DMI, and the capability to toggle the wall states with an in-plane field pulse and consequently their directions of motion under a current pulse. We present a phase diagram for the bistable Néel domain wall states as a function of in-plane field pulse width and amplitude. By fitting the experimental data to an analytical model of Néel wall reversal through the nucleation and propagation of Bloch lines, we extract the length of the initial reversed domain wall segment and Bloch line nucleation energy barrier. Current-driven motion of in-plane anisotropy stabilized Néel walls is qualitatively different from that of DMI-stabilized ones owing to the different symmetry of the effective fields that stabilize the Néel configuration. Furthermore, we present a proof of principle demonstration for 2-bit random number generation based on the stochastic reversal of domain wall chirality. These results provide critical insight into the topological energy barrier of Bloch lines and identify paths towards domain wall-based memory and computing devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic glassiness in noncentrosymmetric Sm 7 Pd 3 : Interplay of magnetic frustration, long-range order, and frozen domains

Here, we present a comprehensive investigation of the intricate spin dynamics in the noncentrosymmetric compound Sm 7 ⁢Pd 3 , revealing the coexistence of spin-glass, domain-glass, and ferromagnetic (FM) behaviors. Magnetic field-dependent measurements indicate large coercivity, suggesting ferromagnetic domain formation below the Curie temperature (𝑇 C ≈ 173 K), while temperature-dependent magnetization data point to antiferromagnetic (AFM) coupling, highlighting the competition between FM and AFM interactions. Detailed ac susceptibility, isothermal remanent magnetization, and aging effect measurements demonstrate the presence of two distinct types of glassiness in the sample, and their possible origins are discussed extensively. Magnetization measurements reveal the mixing of the 𝐽 = 5/2 ground state of Sm 3+ with the excited 𝐽 = 7/2 multiplet, lying 965 K above. The specific heat data show further crystalline electric field splitting of the 𝐽 = 5/2 state into a ground-state doublet and a fourfold-degenerate excited state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A Review of the Generic Grid-Forming Model Used by the System Operator in Chile

The objective in this project is to verify the applicability of using generic electro-magnetic transient domain models of GFM technology through a wide range of tests and system conditions proposed by subject matter experts of GFM technology through a wide range of tests and system conditions proposed by subject matter experts. For this study, we used the generic GFM electro-magnetic transient model available in the EMTP (Electromagnetic Transient Program) software library, and we assessed the model’s various GFM capabilities through 12 tests. In this report, we compare the performance of the model with that of an original equipment manufacturer (OEM) GFM model. We also share the key insights and lessons learned from this work.

24 POWER TRANSMISSION AND DISTRIBUTION↗