Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Current status of permanent magnet radiation resiliency studies at CEBAF

One possible future for Jefferson Lab’s Continuous Electron Beam Accelerator Facility (CEBAF) lies in upgrading its maximum nominal energy using Fixed-Field Alternating-gradient (FFA) technology for its recirculating arcs. The current proposal aims to use permanent magnets to supply the fixed fields. One concern among reviewers is the degradation of these permanent magnets during operation due to the radiation environment in which they will be present. This work, funded by a Laboratory Directed R&D grant, aims to measure the magnet degradation in the CEBAF tunnel enclosure, and extrapolate to the energies expected from the upgrade. We present the latest results of this study, as well as plans moving forward.

Accelerator Physics↗
DOE OSTI2026

Insulating ground state and 2−𝑘 magnetic structure of candidate Weyl hydrogen-atom K2⁢Mn3⁢(AsO4)3

The ideal Weyl "hydrogen-atom" semimetal exhibits only a single pair of Weyl nodes and no other trivial states at the Fermi energy. Such a material would be a panacea in the study of Weyl quasi-particles, allowing direct unambiguous observation of their topological properties. The alluaudite-like K2⁢Mn3⁢(AsO4)3 compound was recently proposed as such a material. Here, we use comprehensive experimental work and first-principle calculations to assess this prediction. We find K2⁢Mn3⁢(AsO4)3 crystallizes in the 𝐶⁢2/𝑐 symmetry with a quasi-one-dimensional Mn sublattice, growing as small needle-like crystals. Bulk property measurements reveal magnetic transitions at ≈8 and ≈4 K, which neutron scattering experiments show correspond to two distinct magnetic orders, first a partially ordered ferrimagnetic 𝐤𝟏=(0,0,0) structure at 8 K and a second transition of 𝐤𝟐=(1,0,0) at 4 K to a fully ordered state. Below the second transition, both ordering vectors are necessary to describe the complex magnetic structure with modulated spin magnitudes. Both of the best-fit magnetic structures in this work are found to break the symmetry necessary for the generation of Weyl nodes, though one of the magnetic structures allowed by 𝐤𝟏 does preserve this symmetry. However, the crystals are optically transparent and ellipsometry measurements reveal a large band gap, undermining expectations of semimetallic behavior. Density functional theory calculations predict an insulating antiferromagnetic ground state, in contrast to previous reports, and suggest potential frustration on the magnetic sublattice. Given the wide tunability of the alluaudite structure, we consider ways to push the system closer to a semimetallic state.

Taddei, Keith M [Argonne National Laboratory]↗
DOE OSTI2024

Wavelength modulation laser-induced fluorescence for plasma characterization

Laser-Induced Fluorescence (LIF) spectroscopy is an essential tool for probing ion and atom velocity distribution functions (VDFs) in complex plasmas. VDFs carry information about the kinetic properties of species that is critical for plasma characterization. Accurate interpretation of these functions is challenging due to factors such as multicomponent distributions, broadening effects, and background emissions. Our research investigates the use of Wavelength Modulation (WM) LIF to enhance the sensitivity of VDF measurements. Unlike standard Amplitude Modulation (AM) methods, WM–LIF measures the derivative of the LIF signal. This approach makes variations in VDF shape more pronounced. VDF measurements with WM–LIF were investigated with both numerical modeling and experimental measurements. The developed model enables the generation of both WM and AM signals, facilitating comparative analysis of fitting outcomes. Experiments were conducted in a weakly collisional argon plasma with magnetized electrons and non-magnetized ions. Measurements of the argon ion VDFs employed a narrow-band tunable diode laser, which scanned the 4p 4 D 7/2 –3d 4 F 9/2 transition centered at 664.553 nm in vacuum. A lock-in amplifier detected the second harmonic WM signal, which was generated by modulating the laser wavelength with an externally controlled piezo-driven mirror of the diode laser. Finally, our findings indicate that the WM–LIF signal is more sensitive to fitting parameters, allowing for better identification of VDF parameters such as the number of distribution components, their temperatures, and velocities. In addition, WM–LIF can serve as an independent method to verify AM measurements and is particularly beneficial in environments with substantial light noise or background emissions, such as those involving thermionic cathodes and reflective surfaces.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

High-harmonic spin-shearing interferometry for spatially resolved EUV magneto-optical spectroscopy

We present a method for achieving hyperspectral magnetic imaging in the extreme ultraviolet (EUV) region based on high-harmonic generation (HHG). By interfering two mutually coherent orthogonally-polarized and laterally-sheared HHG sources, we create an EUV illumination beam with spatially-dependent ellipticity. By placing a magnetic sample in the beamline and sweeping the relative time delay between the two sources, we record a spatially resolved interferogram that is sensitive to the EUV magnetic circular dichroism of the sample. This image contains the spatially-resolved magneto-optical response of the sample at each harmonic order, and can be used to measure the magnetic properties of spatially inhomogeneous magnetic samples.

Optics↗
DOE OSTI2025

Fiber-optic bolometers with high-temperature tolerance and reduced time constants for fusion plasma diagnostics

Fiber-optic bolometers (FOBs) designed for plasma radiation measurement in magnetically confined fusion environments have been previously developed and tested at the DIII-D tokamak. These FOBs utilize a silicon Fabry–Perot interferometer at the fiber tip for temperature measurement and a gold disk as a radiation absorber. This paper presents recent advancements in the development of FOBs with reduced cooling time constants and enhanced temperature tolerance. We also demonstrate high-temperature operation and report findings from irradiation tests. By incorporating a copper sensor holder as a thermal sink and integrating two closely packed sensor heads into a compact design, the cooling time constants were reduced to ∼100 ms in vacuum, while minimizing uncertainties caused by temperature gradients. The FOBs were subjected to heating at 400 °C for five hours, with no observed degradation in noise performance post-heating. High-temperature operation tests were conducted at ∼220 °C using a 404 nm square-wave modulated laser to simulate the plasma radiation. In addition, four FOBs constructed from copper-coated pure-silica fibers were fabricated and underwent irradiation testing, enduring a total γ-radiation dose of 15.2 MGy and a neutron fluence of 1.6 × 10 18 n/cm 2 . As a result, the FOBs maintained their physical integrity and the optical signal shows high visibility throughout the test.

42 ENGINEERING↗
DOE OSTI2026

A new cw-NMR Q-meter for dynamically polarized targets for particle physics

Polarized solid targets produced via Dynamic Nuclear Polarization rely on Continuous-Wave Nuclear Magnetism Resonance measurements to accurately determine the degree of polarization of bulk samples polarized to nearly 100%. Since the late 1970's phase sensitive detection methods have been utilized to observe the magnetization of a sample as a small change in inductance under RF excitation near the Larmor frequency of the nuclear species of interest, using a device known as a Q-meter. Liverpool Q-meters, produced in the UK in the 80's and 90's, have been the workhorse devices for these targets for decades, however their age and scarcity has meant new systems are needed. In conclusion, we describe a Q-meter system designed and built at Jefferson Lab in the Liverpool style to have comparable electronic performance with several improvements to update and adapt the devices for modern use.

Dynamic nuclear polarization↗
DOE OSTI2026

Avoidance of disruptions on KSTAR due to vertical displacement events via novel real-time stability assessment

Disruption avoidance via the DECAF approach has been achieved on KSTAR using a novel real-time vertical stability assessment and a multiactuator feedback control strategy. The development of disruption avoidance strategies with reactor-relevant reliability is an urgent activity, enabling future fusion power plants. The stability metric employed is based on a new formulation of a vertical force gradient balance metric evaluated across the poloidal cross section of the plasma, with parameters tuned using historical data. Evaluation of this metric on a validation set of 400 recent KSTAR shots indicates >82% of Vertical displacement events can be avoided via feedback control. Essential to its calculation is the two-dimensional toroidal current density distribution in the plasma. Measurement of this profile faster than fully-converged equilibrium reconstructions can deliver is found to improve forecaster performance and is achieved with a surrogate model that takes as input magnetic diagnostic measurements and outputs the current profile on a basis comprising the top principal components of historical current profiles (from past equilibrium reconstructions). This method solves the non-uniqueness problem typically faced when reconstructing current profiles directly from diagnostics, while improving computational time and accuracy. On average, profiles produced by this model reach coefficients of determination of >0.99 with respect to those from equilibrium reconstructions. The avoidance actuators employed include poloidal field coils and an electron cyclotron current drive system. The multiactuator approach, as shown in this first demonstration, allows disruption avoidance while minimizing impact to operational performance. This ability, along with its flexibility and speed, makes this new approach an attractive option for avoiding these types of disruptions in reactors.

Tobin, Matthew [Columbia Univ., New York, NY (Unit↗
DOE OSTI2025

Evidence for nodal superconductivity in infinite-layer nickelates

Infinite-layer nickelates present a new family of potential unconventional superconductors. A key open question is the superconducting pairing symmetry. We present low-temperature measurements of the magnetic penetration depth in optimally doped La 0.8 Sr 0.2 NiO 2 , Pr 0.8 Sr 0.2 NiO 2 , Nd 0.8 Sr 0.2 NiO 2 , and Nd 0.7875 Sr 0.2125 NiO 2 . For La- and Pr-nickelates, the superfluid density shows a quadratic temperature dependence, indicating nodal superconductivity in the presence of disorder. Nd-nickelate exhibits complex low-temperature behavior associated with Nd 4f magnetism, which precludes a direct measure of the nodal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Static and dynamic properties of the frustrated spin-$\frac{1}{2}$ depleted-kagome antiferromagnet Cu 7 (TeO 3 ) 2 (SO 4 ) 2 (OH) 6

The structural and magnetic properties of the two-dimensional spin-$\frac{1}{2}$ depleted-kagome compound Cu 7 (TeO 3 ) 2 (SO 4 ) 2 (OH) 6 are investigated using x-ray diffraction, magnetization, heat capacity, and 1 H Nuclear Magnetic Resonance (NMR) measurements. From the analysis of magnetic susceptibility, we found a large Curie-Weiss temperature [𝜃 CW = −50⁢(2)⁢K] and the coexistence of antiferromagnetic and ferromagnetic interactions. The value of 𝜃 CW gives an estimate of the average nearest-neighbor antiferromagnetic interaction of 𝐽/𝑘 B ≃ 66K. The NMR relaxation rates (1/𝑇 1 and 1/𝑇 2 ) exhibit a peak, providing evidence for a magnetic long-range order at 𝑇* ≃ 4K which appears to be canted antiferromagnetic type. Heat capacity also features a broad maximum at 𝑇* that moves towards higher temperatures with increasing magnetic field, reflecting defect induced Schottky anomaly. The frustration parameter 𝑓 𝑟 = |𝜃 CW |/𝑇* ≃ 12.5 renders the compound a highly frustrated low-dimensional magnet.

Akshay, K. U. [Indian Institute of Science Educati↗
DOE OSTI2025

Enhanced Néel Temperature and Unusual Thermal Expansion in Flux-Grown FeCrAs Crystals

Here, we report results from our experimental investigation of the distorted kagome compound FeCrAs. We used tin metal as a flux to produce needlelike crystals, which we characterized using single-crystal X-ray diffraction as well as measurements of magnetization, electrical transport, and heat capacity. The physical behaviors differ in two notable ways from those of previously studied crystals grown from a stoichiometric melt. First, the Néel temperature is found to be 150 K, about 25 K higher than in previous reports. Second, the Sommerfeld coefficient, a measure of the electronic heat capacity, is found to be significantly smaller than the previously reported value. These differences indicate stronger magnetic interactions and fewer charge carriers in the flux-grown crystals, which may be related to differences in stoichiometry or disorder. In addition, we find unusual thermal expansion behavior, with an anomaly at the Néel temperature and nearly temperature-independent thermal expansion along the hexagonal c-axis above this transition. This suggests significant spin–lattice coupling, which may provide insight into nonmetallic transport properties that have been associated with anomalous charge carrier scattering. The flux growth presented here may provide a useful approach for tuning crystal chemistry to explore magnetism, transport, and spin–lattice coupling in this interesting material.

McGuire, Michael A. [Oak Ridge National Laboratory↗
DOE OSTI2024

Reconstruction of the 4D beam matrix

The widely used transverse parameters characterizing particle beams are the Twiss parameters. These parameters can be measured experimentally but they do not fully characterize the beam since they do not account for possible correlations in particle distribution between two transverse coordinates. These correlations may occur due to uncompensated magnetic field at the cathode or misalignment of focusing quadrupoles in the transport beamline. We test a novel diagnostic for diagnosing full 4D beam matrix which may be used to identify such imperfections. The diagnostic is based on transporting the beam through the beamline which includes a quadrupole and a skew quadrupole magnets and measuring the resulting 2D beam distribution at the screen downstream. Such a measurement can be viewed as measuring a 2D projection of the 4D distribution. Different settings of the quads provide measurements of different slices of the phase space. The reconstruction of the original beam matrix from a number of measurements is done using machine learning algorithm, which provides a fast and reliable way of reconstruction for an arbitrary configuration of the scanning beamline. In August 2024, we set up the diagnostic beamline to perform a quadrupole scan of the beam. The setup includes a skew quadrupole, a regular quadrupole, and a screen. The images on the screen were post-processed to remove experimental artifacts and enhance contrast by eliminating background noise outside the core of the distribution=. The rms parameters of the distribution were then calculated and used as inputs for the reconstruction algorithm. This algorithm attempts to determine the initial beam matrix that produces expected images on the screen closely matching the observed images across all quadrupole settings. The algorithm found a solution in which the expected rms parameters closely align with the observations. Validation of the results is planned for FY25.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Analysis of runaway electron driven whistler wave instability experiments

Data acquired on the DIII-D tokamak were analyzed. The data are from experiments that were conducted to study an instability that is driven unstable by intense populations of electrons with MeV energies that are known as runaway electrons. The instability is a type of plasma wave called a whistler wave that occurs at frequencies above the ion cyclotron frequency but well below the electron cyclotron frequency. The waves were measured by magnetic fluctuation coils that are embedded in the DIII-D vacuum vessel wall. After upgrades to this diagnostic were completed, new experiments were conducted on July 13, 2020 in order to measure the toroidal mode number of the whistler waves and to extend the frequency of the detected waves. Through the use of mixers, instability between 600-700 MHz was detected. (The initial experiments only measured up to 200 MHz.) Analysis of the data was led by Hari Choudhury, a PhD student at Columbia University. Mr. Choudhury has submitted two papers for publication that include contributions by UC Irvine (UCI) Professor Heidbrink and his graduated PhD student Genevieve DeGrandchamp: “Detailed Characterization of Runaway Electron Driven Whistler Waves in Low-Density DIII-D Discharges” and “First Demonstration of Resonant Pitch-Angle Scattering of Relativistic Electrons by Externally-Launched Helicon Waves.” The first paper, which has been submitted to Physics of Plasmas, has significant contributions to both the data and the interpretation by UCI scientists. In contrast, UCI contributions to the second paper, which has been submitted to Physical Review Letters, are relatively minor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Quality and Loss Factor Analysis of YBCO Superconducting Transmission Lines for Axion Dark Matter Detection

Axion haloscope experiments aim to detect the conversion of axions into microwave photons in a magnetic field, which produces extremely small signals requiring low-loss cryogenic transmission lines for readout to reduce noise and attenuation. Yttrium Barium Copper Oxide (YBCO) cables are a promising candidate. Unlike commonly used low-loss superconducting cables such as Niobium (Nb) and Niobium Titanium (NbTi), which have low critical fields, YBCO is a high-temperature superconductor that can remain stable in strong magnetic fields. We evaluate their suitability by characterizing the quality and loss factors of five stripline resonators (three YBCO, and copper and silver references) from the Brookhaven Technology Group at 77 K without an external field, and cooled to 30 mK in a 14 T magnet. For measurements at 77 K we recorded scattering parameter data and employed Lorentzian and circle-fitting analysis techniques. We identified the best-performing resonator and developed a cryogenic probe for future testing in the magnet at millikelvin temperatures.

Marinos, Zoe [UCLA]↗
DOE OSTI2026

Terahertz magneto-nanoscopy of encapsulated monolayer graphene

This study investigates the nanoscale conductivity of encapsulated monolayer graphene at temperatures down to 5 K and magnetic fields of up to 1 T. We use the scattering-type scanning near-field optical microscopy technique to probe magnetic-field-dependent responses from graphene close to charge neutrality in the terahertz spectral region. We observe the near-perfect high-q reflector behavior of graphene but with subtle changes by the presence of magnetic fields. Measurements align with calculations of the magneto-optical conductivity and the near-field spectroscopic contrast that describes the field-tunable cyclotron resonance of Dirac fermions. Our result provides an initial step toward understanding temperature and magnetic field effects on nanoscale terahertz transport in two-dimensional quantum materials.

Kim, Richard H. J. [Ames Laboratory (AMES), Ames, ↗
DOE OSTI2025

Sub-tesla On-Chip Nanomagnetic Metamaterial Platform for Angle-Resolved Photoemission Spectroscopy

Magnetically controlled states in quantum materials are central to their unique electronic and magnetic properties. However, direct momentum-resolved visualization of these states via angle-resolved photoemission spectroscopy (ARPES) has been hindered by the disruptive effect of magnetic fields on photoelectron trajectories. Here, we introduce an in situ method that is, in principle, capable of applying magnetic fields up to 1 T. This method uses substrates composed of nanomagnetic metamaterial arrays with alternating polarity. Such substrates can generate strong, homogeneous, and spatially confined fields applicable to samples with thicknesses up to the micron scale, enabling ARPES measurements under magnetic fields with minimal photoelectron trajectory distortion. Here, we demonstrate this minimal distortion with ARPES data taken on monolayer graphene. Our method paves the way for probing magnetic field-dependent electronic structures and studying field-tunable quantum phases with state-of-the-art energy-momentum resolutions.

Magnetic properties↗
DOE OSTI2026

Measurements and scaling of ion propulsion impulse during driven magnetic reconnection

Impulse scaling during magnetic reconnection, the magnetic energy conversion to kinetic energy, via direct Mach probe measurements in Magnetic Reconnection Experiment is examined. Ion exhaust velocity and impulse scalings with reconnecting magnetic field during the push phase of driven reconnection are presented. The outflows and impulse measurements are compared with global MHD simulations. Both measurements and simulations reveal a favorable scaling, greater than linear, of impulse with reconnecting field. These scaling results establish that magnetic reconnection could be utilized for plasma propulsion.

Ebrahimi, Fatima [Princeton Plasma Physics Laborat↗
DOE OSTI2025

Creep-enhanced vortex pinning revealed through nonmonotonic relaxation of the Campbell length

Here, we study the effects of flux creep on the linear AC response of the vortex lattice in single crystals Ca 3 ⁢Ir 4 ⁢Sn 13 by measuring the Campbell penetration depth, 𝜆 C ⁡(𝑇,𝐻,𝑡) . Thermal fluctuations release vortices from shallow pinning sites, only for them to become re-trapped by deeper potential wells, causing an initial increase of the effective Labusch parameter, which is proportional to the pinning well curvature. This effect cannot be detected in conventional magnetic relaxation measurements but is revealed by our observation of a nonmonotonic time evolution of 𝜆 C ⁡(𝑇,𝐻,𝑡) , which directly probes the average curvature of the occupied pinning centers. The time evolution of 𝜆 C ⁡(𝑇,𝐻,𝑡) was measured at different temperatures in samples with different densities of pinning centers produced by electron irradiation. The curves can be collapsed together when plotted on a logarithmic time scale 𝑡 → 𝑇 ⁢ln ⁡(𝑡/𝑡 0 ) confirming that the time evolution is driven by flux creep. The 𝜆 C ⁡(𝑇,𝐻,𝑡) is hysteretic with a noticeable nonmonotonic relaxation in the presence of a vortex density gradient (after zero-field cooling), but is monotonic after field cooling, where the vortex density is uniform. This result quantitatively corroborates the novel picture of vortex creep based on the strong pinning theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗