Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Temperature-Controlled Reversible Formation and Phase Transformation of 3D Nanocrystal Superlattices Through In Situ Small-Angle X-ray Scattering

For decades, the spontaneous organization of nanocrystals into superlattices has captivated the scientific community. However, achieving direct control over the formation of the superlattice and its phase transformations has proven to be a grand challenge, often resulting in the generation of multiple symmetries under the same experimental conditions. Here, we achieve direct control over the formation of the superlattice and its phase transformations by modulating the thermal energy of a nanocrystal dispersion without relying on solvent evaporation. In this study, we follow the temperature-dependent dynamics of the self-assembly process using synchrotron-based small-angle X-ray scattering. When cooled below –24.5 °C, lead sulfide nanocrystals form micrometer-sized three-dimensional phase-pure body-centered cubic superlattices. When cooled below –35.1 °C, these superlattices undergo a collective diffusionless phase transformation that yields denser body-centered tetragonal phases. These structural changes can be reversed by increasing the temperature of the dispersion and may lead to the direct modulation of the optical properties of these artificial solids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Grain Boundary-Limited Thermal Transport in Suspended Thin Graphite across an Unexplored Thickness Regime

Here, we present systematic thermal conductivity (κ) measurements of suspended thin graphite ribbons, 234–527 nm thick, using a four-probe 3ω method. Unlike recent reports of phonon hydrodynamics and exceptionally high κ in micrometer-thick graphite ( Science, 2020), we observe significantly lower κ and no signatures of collective phonon flow in this intermediate thickness regime. Instead, our measured κ lies between few-layer graphene and bulk graphite. These results agree with a first-principles-informed Peierls–Boltzmann transport model with spatially resolved Monte Carlo sampling. Additionally, the temperature for the peak κ shifts lower with increasing thickness, due to the interplay of phonon-boundary and phonon-isotope scattering. Incorporating grain boundary scattering into simulations is necessary to replicate the experimental trends. These findings delineate the boundary between ballistic, hydrodynamic, and diffusive transport regimes in graphite and underscore the dominant role of disorder and geometry in phonon transport in quasi-two-dimensional materials, offering insights for nanoscale thermal management.

Boltzmann transport model↗
DOE OSTI2019

Pulsed Electrical Stimulation Enhances Body Fluid Transport for Collagen Biomineralization

Mechanical loads from physiologic activities such as walking and running generate bioelectricity in bones. By mimicking bioelectricity, external electrical stimulations have also been used therapeutically to stimulate bone-forming cells and, thus, to promote bone regeneration. However, little is known about the physicochemical mechanism(s) by which electrical stimulations drives calcium phosphate mineralization of collagen. Here, we showed that, during in vitro collagen mineralization in the absence of cells, application of pulsed electrical stimulation significantly enhanced the transport of ionic body fluid components through a micrometer-scale channel (~100–200 μm gap space between the inner surfaces of tube-like collagen scaffolds and a cathode placed inside the collagen scaffolds). The enhanced transport of ionic precursors increased diffusion of the charged precursors from the channel to the inner collagen surface, where bone mineralization was otherwise restricted. The results indicate that pulsed electrical signals can locally accelerate the nucleation of calcium phosphate nanocrystals in or on collagen, allowing us to better control the spatial distribution of the nanocrystals at the microscale. Finally, the findings from this study provide insights into the utilization of electrical stimulation for applications such as facilitating bone-fracture healing and designing better bone-specific biomaterials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Moisture-Driven Formation and Growth of Quasi-2-D Organolead Halide Perovskite Crystallites

Ruddlesden–Popper phase quasi-2-D organolead halide perovskites like n-butylammonium methylammonium lead iodide (nBA-MAPI) exhibit improved moisture stability over typical 3-D perovskite materials, making them exciting for use in a variety of applications such as photovoltaic (PV) devices. This improved stability is the result of a unique disproportionation-based degradation mechanism that protects the bulk of the nBA-MAPI from extensive damage through the formation of a protective, low-n surface layer. In addition to this surface layer, nBA-MAPI films also exhibit the dynamic growth of micrometer-scale crystallites and cracks at the surface of the film, unique and potentially important byproducts of quasi-2-D perovskite disproportionation. Here, we present a detailed study of these crystallites using several analytical techniques including photoluminescence spectroscopy (PL), confocal fluorescence microscopy (CFM), atomic force microscopy (AFM) combined with time-of-flight-secondary ion mass spectrometry (ToF-SIMS), and others in an effort to better understand the relationship between material disproportionation and crystallite growth. Our results show that the crystallites form after exposure to humid air and confirm that they are composed of low-n phases of nBA-MAPI. The crystallites are found to extend into the interior of the film and exhibit continued growth while exposed to moisture over 72 h. This growth is accompanied by both a decrease in the bulk 2-D phase and an increase in a 3-D-like phase in the surface PL spectra, indicating that the crystallites are likely a product of moisture-driven disproportionation. Importantly, similar crystallites are also observed to form within model PV devices, indicating that such processes must be accounted for when designing future devices containing materials like nBA-MAPI.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Crack-Free Silicon Monoxide as Anodes for Lithium-Ion Batteries

The volume expansion of Si and SiO particles was investigated using a single-particle battery assembled with a focused ion beam and scanning electron microscopy (FIB-SEM) system. Single Si and SiO particles were galvanostatically charged and discharged as in real batteries. Microstructural changes of the particles were monitored in situ using FIB-SEM from two different angles. The results revealed that the volume expansion of micrometer size particle SiO was not only much smaller than that of Si, but it also kept its original shape with no sign of cracks. Additionally, this isotropic mechanical property of a SiO particle can be attributed to its microstructure: nanosized Si domains mixed with SiO 2 domains. The nanosized Si domains can mitigate the anisotropic swelling caused by the orientation-dependent lithium-ion insertion; the surrounding SiO 2 domains can act as a buffer to further constrain the localized anisotropic swelling.

25 ENERGY STORAGE↗
DOE OSTI2020

Centimeter-Scale Pillared-Layer Metal–Organic Framework Thin Films Mediated by Hydroxy Double Salt Intermediates for CO 2 Sensor Applications

Fabrication of metal–organic framework (MOF) thin films over macroscopic surface areas is a subject of great interest for gas sensor application platforms such as optics and microelectronics. However, a direct synthesis of MOF films at ambient conditions, in particular pillared-layer MOF films due to their anisotropic structures, remains a significant challenge. Herein, we demonstrate for the first time a facile construction of dense and continuous pillared-layer MOF thin films on a centimeter scale via an aluminum-doped zinc oxide template and hydroxy double salt (HDS) intermediates at room temperature. A series of Cu(II)-based pillared MOFs with different 1,4-benzenedicarboxylic acid (bdc) ligands were explored for optimizing MOF film formation for CO 2 sensor applications. Nonpolar ligands with lower water solubility preferentially formed crystalline pillared MOF structures from HDS intermediates. A Cu 2 (ndc) 2 (dabco) (ndc = 1,4-naphthalene-bdc; dabco = 1,4-diazabicyclo[2.2.2]octane) MOF demonstrated the most dense and uniform film growth with micrometer thickness over one square centimeter area. This synthetic approach for growing Cu 2 (ndc) 2 (dabco) MOF thin films was successfully translated toward two sensing platforms: a quartz crystal microbalance and an optical fiber sensor. These Cu 2 (ndc) 2 (dabco) MOF-coated sensors displayed sensitivity toward CO 2 and response/recovery time on the scale of seconds, even at moderate humidity levels. Finally, this work provides a road map for producing continuous and anisotropic crystalline MOF thin films over a centimeter scale area on various substrates, which will greatly facilitate their utilization in MOF-based sensor devices, among other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Orientation-Controlled Large-Area Epitaxial PbI 2 Thin Films with Tunable Optical Properties

Lead iodide (PbI 2 ) as a layered material has emerged as an excellent candidate for optoelectronics in the visible and ultraviolet regime. Micrometer-sized flakes synthesized by mechanical exfoliation from bulk crystals or by physical vapor deposition have shown a plethora of applications from low-threshold lasing at room temperature to high-performance photodetectors with large responsivity and faster response. However, large-area centimeter-sized growth of epitaxial thin films of PbI 2 with well-controlled orientation has been challenging. Additionally, the nature of grain boundaries in epitaxial thin films of PbI 2 remains elusive. Here, we use mica as a model substrate to unravel the growth mechanism of large-area epitaxial PbI 2 thin films. The partial growth leading to uncoalesced domains reveals the existence of inversion domain boundaries in epitaxial PbI 2 thin films on mica. Combining the experimental results with first-principles calculations, we also develop an understanding of the thermodynamic and kinetic factors that govern the growth mechanism, which paves the way for the synthesis of high-quality large-area PbI 2 on other substrates and heterostructures of PbI 2 on single-crystalline graphene. Here, the ability to reproducibly synthesize high-quality large-area thin films with precise control over orientation and tunable optical properties could open up unique and hitherto unavailable opportunities for the use of PbI 2 and its heterostructures in optoelectronics, twistronics, substrate engineering, and strain engineering.

2D materials↗
DOE OSTI2022

Interfacial Reactivity of Silicon Electrodes: Impact of Electrolyte Solvent and Presence of Conductive Carbon

Silicon (Si) is a promising high-capacity material for lithium-ion batteries; however, its limited reversibility hinders commercial adoption. Approaches such as particle and crystallite size reduction, introduction of conductive carbon, and use of different electrolyte solvents have been explored to overcome these electrochemical limitations. Herein, operando isothermal microcalorimetry (IMC) is used to probe the influence of silicon particle size, electrode composition, and electrolyte additives fluoroethylene carbonate and vinylene carbonate on the heat flow during silicon lithiation. In this work, the IMC data are complemented by X-ray photoelectron and Raman spectroscopies to elucidate differences in solid electrolyte interphase (SEI) composition. Nanosized (~50 nm, n-Si) and micrometer-sized (~4 μm, μ-Si) silicon electrodes are formulated with and without amorphous carbon and electrochemically lithiated in ethylene carbonate (EC), fluoroethylene carbonate (FEC), or vinylene carbonate (VC) based electrolytes. Notably, n-Si electrodes generate 53–61% more normalized heat relative to their μ-Si counterparts, consistent with increased surface area and electrode/electrolyte reactivity. Introduction of amorphous carbon significantly alters the heat flow profile where multiple exothermic peaks and increased normalized heat dissipation are observed for all electrolyte types. Notably, the VC-containing electrolyte demonstrates the greatest normalized heat dissipation of the electrode compositions tested showing as much as a 50% increase compared to the EC or FEC counterparts. The results are relevant to the understanding of silicon negative electrode function in the presence of electrolyte additives and provide insight relative to silicon containing cell reactivity and safety.

25 ENERGY STORAGE↗
DOE OSTI2019

Designing Multiscale Porous Metal by Simple Dealloying with 3D Morphological Evolution Mechanism Revealed via X-ray Nano-tomography

Designing materials with multiscale, hierarchical structure is critical to drive the advancement of new technology. Specifically, porous metals with multiscale porosity from nanometer to micrometer sizes would lead to enhanced physical and chemical properties—the micron-sized pores can increase the effective diffusivity of ion transport within the porous media, and the nano-sized pores provide high specific surface area, enabling functionalities that are unique to nanoporous metals. A new ternary precursor alloy selection concept utilizing the different mixing enthalpies is demonstrated in this work for the design of multiscale, bimodal porous copper from a simple, one-step dealloying of Cu–Fe–Al ternary alloy. The nanoporosity in the bimodal porous structure is formed from dealloying of the Cu-rich phase, whereas the microporosity is controlled by dissolving the Fe-rich phase, determined by both the initial Fe particle size and sintering profile. In addition to advancing the materials design method, the multiscale pore formation during dealloying was directly visualized and quantified via an interrupted in situ synchrotron X-ray nano-tomography. The 3D morphological analysis on tortuosity showed that the presence of the microporosity can compensate the increase of the diffusion path length due to nanoporosity, which facilitates diffusion within the porous structure. Altogether the focus of the work is to introduce a new strategy to design multiscale porous metals with enhanced transport properties, and sheds light on the fundamental mechanisms on the 3D morphological evolution of the system using advanced synchrotron X-ray nano-tomography for future materials development and applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Hydrogen Uptake Kinetics of 1,4-Bis(phenylethynyl)benzene (DEB) Rubberized Coating on Silicone Foam Substrate

The hydrogen uptake kinetics of 1,4-bis(phenylethynyl)benzene, or DEB, mixed with palladium (Pd) on activated carbon in a rubber matrix coating on top of a porous silicone foam substrate are investigated. First, isothermal isobaric hydrogenation experiments were performed under different temperatures and H 2 pressures to extract the uptake kinetics. The H 2 uptake models based on the measured kinetic parameters were then employed to investigate/simulate the performance of the getter under dynamic application environments. The actual hydrogenation characteristics in this type of getter is multifaceted and involve actual H 2 concentration in the getter matrix, micrometer scale diffusion of atomic hydrogen away from Pd sites, precipitation of hydrogenated DEB crystals at the coating surfaces, and mobility of fresh DEB molecules. The kinetic analysis/modeling methodology described in this report can serve as a template for other gas-solid reactions as well. Aside from possessing a good hydrogen capacity and excellent performance, this type of rubberized getter also offers some unique advantages over traditional solid getter: flexible structure and protection of Pd catalyst from exposure to the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

3D Morphology of Bimodal Porous Copper with Nano-Sized and Micron-Sized Pores to Enhance Transport Properties for Functional Applications

Multiscale porous metals with multiscale porosity from nanometer to micrometer have a high specific surface area and high effective diffusivity for ion transport, thereby enhancing functionalities and extending the applications of porous metals. Herein, the Cu–Fe–Al ternary system was selected as the precursor alloy to construct multiscale, bimodal porous copper by the chemical dealloying method. The effect of the phase composition and initial microstructure of precursor alloys (Al x Fe 75– x Cu 25 , x = 10–60) on the three-dimensional (3D) morphology of multiscale porous metals was systematically investigated, with a goal to precisely control the multiscale porous structure. The four crystal structure phases (body-centered cubic (BCC), face-centered cubic (FCC), CsCl type (B2), and monoclinic) in precursor alloys were analyzed by synchrotron X-ray diffraction refinement. The 3D morphology, feature size distribution, and tortuosity of four representative porous Cu after dealloying Al x Fe 75– x Cu 25 ( x = 10, 30, 50, and 60) precursor alloys were directly visualized and quantified via advanced synchrotron X-ray nanotomography. The relationship between the phases/crystal structures of precursor alloys and their corresponding porous morphology was established: the micron-sized pores in bimodal porous Cu are formed by dissolving the CuFeAl phase with BCC and monoclinic crystal structures, and the nano-sized pores are formed by dealloying the CuFeAl phase with FCC and B2 crystal structures. The size of the nanoporous structure depends on the ratio between the more noble and more active components in the precursor alloy, while the size of the microporous structure depends on the corresponding phase size in the precursor alloy. The tortuosity results showed that the multiscale porous structure with both nanoporosity and microporosity exhibits lower tortuosity, which will enhance transport properties for functional applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Highly Saturated Glassy Liquid Crystal Films Having Nano- and Microscale Thicknesses for High-Power Laser Applications

The optical properties of glassy liquid crystals (GLC’s) designed to provide high resistance to laser-induced damage are explored. GLC’s readily enable freezing of the anisotropic ordering of liquid crystals into the glassy state. This solidity avoids issues of fluid leakage while providing mechanical robustness and the promise of single-substrate coatings or stand-alone films of nanometer to micron thicknesses. A series of three increasingly saturated GLC’s was synthesized and tested for their thin-film (hundreds of nanometers to tens of micrometers) high-peak-power laser-damage resistance with nanosecond pulses at 1053 nm, 532 nm, and 351 nm, as well as their durability under continuous-wave, broadband ultraviolet illumination. As a result, the GLC’s with higher degrees of saturation demonstrated high resistance to laser-induced damage, extending from the near infrared to the ultraviolet spectral region.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bidentate Ligand-Induced Oriented Transformation of CsPbBr 3 Perovskite Nanocrystals into Nanowires for X-ray Photodetectors

We report shape and dimensionality control by ligands is an efficient way to fabricate high-quality perovskite nanocrystals (NCs) with optoelectronic properties. Herein, to realize oriented transformations between different morphologies of CsPbBr 3 nanocrystals, we conceived of the use of defects and bidentate ligands to synergistically drive the reorientation of CsPbBr3nanocrystals into CsPbBr 3 nanowires (NWs). By employing aminocaproic acid as the bidentate ligand, CsPbBr 3 NWs were reconstructed from the CsPbBr 3 NCs (~7 nm) with 20-60 nm in width and several micrometers in length, as well as a 527 nm photoluminescence (PL) peak, 59% PL quantum yield, and 98.5 ns PL lifetime. The bidentate ligand-directed anisotropic shape evolution and growth of perovskite NWs from NCs was elucidated by transmission electronmicroscopy and PL studies. The photodetectors fabricated with the reconstructed CsPbBr 3 NWs displayed a photocurrent enhancement (2.75 × 10 -11 A) compared with that of the devices based on solution-synthesized NWs (2.28 × 10 -11 A). The device also showed a short response time, indicating its more sensitive photoelectric response. This process provides a viable approach to engineering diverse morphologies of perovskite nanocrystals for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Leveraging the Polymer Glass Transition to Access Thermally Switchable Shear Jamming Suspensions

Suspensions of polymeric nano-and microparticles are fascinating stress-responsive material systems that, depending on their composition, can display a diverse range of flow properties under shear, such as drastic thinning, thickening, and even jamming (reversible solidification driven by shear). However, investigations to date have almost exclusively focused on nonresponsive particles, which do not allow in situ tuning of the flow properties. Polymeric materials possess rich phase transitions that can be directly tuned by their chemical structures, which has enabled researchers to engineer versatile adaptive materials that can respond to targeted external stimuli. Reported herein are suspensions of (readily prepared) micrometer-sized polymeric particles with accessible glass transition temperatures (T g ) designed to thermally control their non-Newtonian rheology. The underlying mechanical stiffness and interparticle friction between particles change dramatically near T g . Capitalizing on these properties, it is shown that, in contrast to conventional systems, a dramatic and nonmonotonic change in shear thickening occurs as the suspensions transition through the particles' T g . This straightforward strategy enables the in situ turning on (or off) of the system's ability to shear jam by varying the temperature relative to T g and lays the groundwork for other types of stimuli-responsive jamming systems through polymer chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Subtle Molecular Changes Largely Modulate Chiral Helical Assemblies of Achiral Conjugated Polymers by Tuning Solution-State Aggregation

Understanding the solution-state aggregate structure and the consequent hierarchical assembly of conjugated polymers is crucial for controlling multiscale morphologies during solid thin-film deposition and the resultant electronic properties. However, it remains challenging to comprehend detailed solution aggregate structures of conjugated polymers, let alone their chiral assembly due to the complex aggregation behavior. Herein, we present solution-state aggregate structures and their impact on hierarchical chiral helical assembly using an achiral diketopyrrolopyrrole-quaterthiophene (DPP-T4) copolymer and its two close structural analogues wherein the bithiophene is functionalized with methyl groups (DPP-T2M2) or fluorine atoms (DPP-T2F2). Combining in-depth small-angle X-ray scattering analysis with various microscopic solution imaging techniques, we find distinct aggregate in each DPP solution: (i) semicrystalline 1D fiber aggregates of DPP-T2F2 with a strongly bound internal structure, (ii) semicrystalline 1D fiber aggregates of DPP-T2M2 with a weakly bound internal structure, and (iii) highly crystalline 2D sheet aggregates of DPP-T4. These nanoscopic aggregates develop into lyotropic chiral helical liquid crystal (LC) mesophases at high solution concentrations. Intriguingly, the dimensionality of solution aggregates largely modulates hierarchical chiral helical pitches across nanoscopic to micrometer scales, with the more rigid 2D sheet aggregate of DPP-T4 creating much larger pitch length than the more flexible 1D fiber aggregates. Combining relatively small helical pitch with long-range order, the striped twist-bent mesophase of DPP-T2F2 composed of highly ordered, more rigid 1D fiber aggregate exhibits an anisotropic dissymmetry factor (g-factor) as high as 0.09. This study can be a prominent addition to our knowledge on a solution-state hierarchical assembly of conjugated polymers and, in particular, chiral helical assembly of achiral organic semiconductors that can catalyze an emerging field of chiral (opto)electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Carrier Diffusion Lengths Exceeding 1 μm Despite Trap-Limited Transport in Halide Double Perovskites

In this work we image charge carrier transport over nanometers–micrometers and picoseconds–microseconds in halide double perovskites Cs 2 AgBiBr 6 and Cs 2 AgTlBr 6 single crystals using stroboscopic scattering microscopy. Both materials exhibit long, microsecond carrier lifetimes because of their indirect or symmetry-forbidden direct bandgaps. We extract free-charge and trap-limited mobilities near the surface and in the crystal bulk. The free-charge mobilities for both materials (~10–50 cm 2 /(V s)) can reach those reported for archetypal lead halide perovskites. We measure trap densities exceeding 10 17 cm –3 within ~20 nm of the crystal surface. Measurements on freshly cleaved or thermally annealed crystals suggest the traps are primarily halide vacancies that likely form through surface bromine degassing. Although these traps considerably slow charge transport, they are energetically shallow, enabling thermally induced detrapping and mobile carriers over microseconds at room temperature. This defect tolerance yields carrier diffusion lengths exceeding 1 μm even in the presence of large trap densities and under solar excitation conditions where traps are not saturated. These results suggest that halide double perovskites could rival the best lead-based perovskites for photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Robust, Scalable Platform for the Electrochemical Conversion of CO 2 to Formate: Identifying Pathways to Higher Energy Efficiencies

This work demonstrated a robust, scalable cell architecture for electroreduction of CO 2 (CO 2 R). An up to 90% faradaic efficiency for the conversion of CO 2 R to formate at 500 mA/cm 2 was realized at a 25 cm2 gas diffusion electrode (GDE) with a carbon-supported SnO 2 electrocatalyst. Furthermore, a 1.27 mm thick catholyte was used between the bipolar membrane and cathode GDE, which could be further reduced to tens of micrometers upon refinement. The deconvolution of the potential drop from each individual component/process guides the pathways to higher energy efficiencies of CO 2 R at this platform. Significant changes in the agglomerate size and aspect ratio on the electrode before and after an 11 h test were revealed by nano-CT, suggesting reduced CO 2 accessibility from electrode degradation. The versatility of this CO 2 R testing platform enables the ability to assess materials, components, and interactions at scales more in line with future devices.

30 DIRECT ENERGY CONVERSION↗