Search NASA⌕ Search

SEARCH · Search NASA

Results for “MV”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗
DOE OSTI2025

A real-time distributed solid oxide electrolysis cell (SOEC) model for cyber-physical simulation

System integration and dynamic operability between SOEC and balance-of-plant (BoP) components are major technical challenges before realizing rapid load following of SOEC systems. Cyber-physical simulation (CPS) is a leading-edge digital engineering approach and is regarded as the next step beyond Digital Twins. CPS approach can be used to research SOEC system integration and develop dynamic controls prior to actual pilot testing without using a real SOEC. To seamlessly couple with BoP hardware and access non-observable operational parameters (e.g., local temperature gradient) during transients, a distributed one-dimensional (1D) real-time SOEC model was developed. Its real-time execution was demonstrated for 20 to 640 nodes at the fixed time step of 5 ms. A higher excess air ratio enabled smaller local temperature gradients on SOEC solid materials and faster transients upon current density step change from 0.15 to 0.55 A cm -2 . During the transients, the magnitude of the peak temperature gradient nearly doubled in 10 s from -3.5 to -5.9 °C cm -1 . This represents a significant operating risk that can impact the dynamic operability of SOEC systems. In addition, the local temperature gradient was found to change directions on all nodes in SOEC solid materials, with the greatest impact on the upstream nodes. The SOEC model was also tested at the thermal neutral voltage using actual process air flow parameters as variable model inputs. Variable process air temperatures were found to induce alternating local temperature gradients on SOEC solid materials. These are new operational mechanisms for SOEC degradation relevant for load following operational modes yet distinct from previous reports. To mitigate these unfavorable features, the SOEC can be operated at voltages that are slightly (±20 mV) deviated from the thermal neutral voltage. Here, the corresponding net thermal energy change was less than 1.6% of the electric power consumption. This 1D real-time SOEC model established the basis of cyber-physical simulation of SOEC hybrid systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Unraveling the relationship between physicochemical properties of NiFeReOx catalysts and the correlated performance toward electrochemical oxygen evolution reaction

NiFeO x catalysts with single site Re dopants exhibit much higher active and stability toward electrochemical oxygen evolution reaction (OER) compared to traditional NiFeO x catalysts. Nevertheless, the relationship between physicochemical properties of NiFeReO x catalysts and the correlated performance toward OER is unclear, which hampers to enhance the OER performance further. Herein, we prepared a series of NiFeReO x catalysts with different physicochemical properties by treating them at different temperatures (up to 350 °C) and then evaluated their performance toward OER. Here, the results show that heat treatment can convert all metal oxidation states to higher values as well as specific surface areas, which are believed to favor real active site generation and OER activity enhancement. A decrease in activity is observed with the temperature increase at the low current range, and the smallest overpotential of 248 mV at 10 mA cm −2 is achieved with the pristine NiFeReO x catalyst. In contrast, the heat-treated samples possess smaller Tafel slopes and lower charge transfer resistance likely due to enhanced intrinsic activity (from higher oxidation states) and conductivity, which facilitate the reaction kinetics and surpass the pristine sample at a large current density. Additionally, the sample treated at 350 °C exhibits a higher activity at 1000 mA cm −2 (1.68 V vs. RHE compared to pristine sample of 1.92 V vs. RHE); however, it manifests a poorer stability compared to the pristine one due to the imbalance of reconstruction/transformations that occurred on the catalyst surface during OER operation. Our work unravels the relationship between physicochemical properties of NiFeReO x catalysts and the correlated OER performance and provides valuable insights for designing NiFeReO x catalysts with high activity and durability.

Catalyst reconstruction↗
DOE OSTI2025

Photoelectrocatalytic reduction of CO 2 to formate using immobilized molecular manganese catalysts on oxidized porous silicon

The reduction of carbon dioxide (CO 2 ) to formate using molecular catalysts immobilized on high surface area porous silicon is described. Manganese complexes of the type ( R bpy)Mn(CO) 3 Br (bpy = 2,2′-bipyridine) were prepared with silatrane groups on the bpy ligand for attachment to oxide-coated porous silicon (SiO x -porSi). SiO x -porSi wafers were formed by heating hydrogen-terminated p-type porous silicon wafers under air, and the manganese complexes were immobilized on SiO x -porSi by heating at 80°C. The resulting hybrid photoelectrodes are photoelectrocatalysts for CO 2 reduction in acetonitrile containing 2.0 M triethylamine and 2.0 M isopropanol, yielding formate with high selectivity (>96%) and current density (∼0.6 mA/cm 2 ), excellent reproducibility, and a photovoltage of 280 mV at −1.75 V (versus ferrocenium/ferrocene) under 1 sun illumination. Here, the applied potential is close to the equilibrium potential for CO 2 reduction to formate. This work presents rare examples of immobilized molecular catalysts for CO 2 reduction to formate and the first on semiconducting silicon.

13 HYDRO ENERGY↗
DOE OSTI2024

Improving 2D Schottky contacts using an intralayer strategy

An additional insulating layer between the electrode and semiconductor is beneficial to reduce the interfacial coupling and build two-dimensional (2D) Schottky contacts. Here, an intralayer strategy was proposed by using metallic 2D Bi 2 Sr 2 CaCu 2 O 8+δ (BSCCO) as contacts on 2D semiconductors. Inside a BSCCO monolayer, a conductive layer is sandwiched between insulating layers. Thus, the BSCCO contact has its own insulating layer, which is ultra-thin, single crystalline, and of high quality. This native layer could reduce the metal-induced gap state and thus weaken the interfacial Fermi level pinning effect. Such 2D Schottky diodes thus have barrier heights of 300 mV and a rectification ratio of 104. Furthermore, 2D metal-semiconductor field-effect transistors with BSCCO Schottky gate have a high on-off ratio, low leakage current, and low subthreshold swing value near the theoretical limit. The intralayer structure offers a new approach to improve the 2D Schottky junctions and has prospects in 2D electronics and optoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Preparation of a uranium monocarbide anode and electrochemical characterization in molten LiCl-KCl-UCl 3

Porous uranium carbide (UC) pellets possessing moderate electrical conductivity were synthesized by reaction of UO 2 with graphite at temperatures up to 1550°C under rough vacuum. Conversions as high as 98% were achieved at soak times of 2-4 hours. The electrochemistry of the UC pellets in molten LiCl-KCl-6.5 wt% UCl 3 was explored using a variety of techniques including DC polarization methods, cyclic voltammetry, chronopotentiometry and bulk electrolysis. Here, the electrode reaction for anodic dissolution was found to be kinetically controlled by dissociation of UC to a transition state complex that was hypothesized to consist of a uranium atom partially complexed by chloride ions. Precise measurements of current efficiencies using chronopotentiometry indicated upper limits of 90.9 ± 3.4% and 98.3 +1.7/-3.7% for anode and cathode, respectively, when operating at anodic overpotentials near +300 mV. Bulk electrolysis of a UC pellet performed by passing 98% of the theoretical charge resulted in nearly complete recovery of its uranium content as highly pure metal at the cathode.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simple processing via thermal treatment and catalyst infiltration to enhance nickel electrode performance for liquid alkaline water electrolyzers

Two simple processes for enhancing liquid alkaline water electrolyzer performance are demonstrated. Both enhance 3D Ni electrodes by introducing a micron-scale rough structure throughout the bulk of the electrode. Oxidation/reduction relies on a simple thermal treatment cycle to create surface roughening through the volumetric expansion during NiO formation and volume contraction during reduction back to Ni metal. Catalyst infiltration introduces a washcoat of additional metal particles throughout the electrode, by flooding the electrode with catalyst precursor and converting it to micron-scale particles via a reducing thermal treatment. Further, the largest improvement in performance (211mV at 1.8Acm -2 ) is observed for infiltrated NiFe-3x catalyst. For Fe-free Ni-only electrodes, oxidation/reduction provides a larger improvement (157 mV at 1.8Acm -2 ) than infiltrated Ni-3X (106mV at 1.8Acm -2 ). For both processes, the observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature.

08 HYDROGEN↗
DOE OSTI2025

Rapid synthesis of phase-engineered tungsten carbide electrocatalysts via flash joule heating for high-current-density hydrogen evolution

Fabricating durable and high-performance electrocatalysts operating at high current densities for industrial acidic hydrogen evolution remains a daunting challenge. Tailoring the phase composition of electrocatalysts is a promising strategy to harness synergistic effects and improve charge transfer, thereby optimizing their performance. Here, this work presents a fast, green method based on flash joule heating (FJH) to synthesize phase-engineered tungsten carbide electrocatalysts for the acidic hydrogen evolution reaction (HER) at high current densities. Tungsten carbide electrodes with varying FJH treatment durations (3, 10, 30, and 60 s) are fabricated to fine-tune the mixture of tungsten monocarbide (WC) and tungsten semicarbide (W 2 C) phases. Results show that samples with a 30-s treatment (TC-3) exhibit an optimal balance between these phases, leading to a low overpotential of 180.97 and 387 mV at current densities of 10 mA/cm 2 and 4 A/cm 2 , respectively. TC-3 exhibits significantly lower charge transfer resistance compared to the other electrocatalysts, which can be attributed to its optimal phase ratio. Notably, the TC-3 electrocatalyst remains stable for over 9 days at 4 A/cm 2 due to their controlled phases and excellent corrosion-resistant properties. This work highlights a new method to fabricate cost-effective, high-performance tungsten carbide electrocatalysts with well-controlled phase compositions.

Acidic hydrogen evolution reaction↗
DOE OSTI2026

Developing Science-based fueling protocols for 250-bar hydrogen tanks onboard hydrogen ferries: Experiments and modeling

Combined modeling and experimental studies are reported of the fueling of a large (28 kg capacity) 250-bar Type IV hydrogen tank of the type being deployed on early hydrogen ferries, such as the MV Sea Change. The primary goal was to determine how such tanks can be successfully fueled with hydrogen (state of charge greater than 97%) within 45 minutes without exceeding the 82 °C temperature limit for such tanks. The modeling studies show that a gas injector is needed to avoid thermal stratification during hydrogen fueling which can result in potential hot spots. Empirically, precooling of the hydrogen to 0 °C was found to be needed in some of the cases examined, as ambient conditions greatly affected the need for a precooling to achieve the 45-minute fill time desired by end users. The experimental results afforded a calibration of the engineering model SOFIL for these large 250-bar tanks, which now enables using SOFIL to predict volume-averaged hydrogen fueling temperatures to an accuracy of ±2.7°C for these tanks. The model can therefore be used to evaluate potential scenarios for development of a standardized fueling methodology for ferries utilizing large Type-IV tanks.

08 HYDROGEN↗
DOE OSTI2025

Insight Into the High-Potential Branch of the Alternate Nad+-Dependent NADPH:Ferredoxin Oxidoreductase II (NfnII) from Pyrococcus Furiosus. Evidence for the Gating Step in Electron Bifurcation

We have investigated the rapid-reaction kinetics of the NAD+-dependent NADPH:ferredoxin oxidoreductase II (NfnII) from Pyrococcus furiosus, permitting a comparison with recent work done with the paralog NfnI from the same organism. The half-potentials of the electron-bifurcating L-FAD are highly crossed in both NfnI, meaning the potential for the quinone/semiquinone couple is significantly lower than that for the semiquinone/hydroquinone couple so that the semiquinone oxidation state is thermodynamically unstable. The same appears to be the case with NfnII on the basis of its similar behavior in transient absorption spectroscopy experiments and the absence of any evidence for FAD*- accumulation in the course of reductive titrations (which would be manifested as a transient increase in absorbance at ~380 nm)1. Reductive titrations with both the one-electron donor sodium dithionite and the obligate two-electron donor NADPH demonstrate that, in contrast to NfnI, little FADH* accumulates in the high-potential pathway of NfnII in the course of reduction, as reflected in the absence of a transient increase in absorbance in the 500-600 nm region. This indicates that the half-potentials of the S-FAD are crossed in NfnII by a minimum of 120 mV. Rapid-reaction experiments mixing oxidized NfnII with NADPH also show no evidence of S-FADH* accumulation. Furthermore, the enzyme is only partially reduced at the end of the reaction with NADPH, indicating that there is little electron transfer into the high-potential pathway of NfnII. When the reaction is carried out in the presence of the one-electron carrier ferredoxin, only approximately one equivalent of ferredoxin becomes reduced, in contrast to the maximum of three equivalents seen with NfnI. This is consistent with only a single electron bifurcation event taking place under these conditions with NfnII, with only a single high-potential electron passing into the [2Fe-2S] cluster of the high-potential pathway of NfnII but not progressing further to the S-FAD. This accounts for the observation that NfnII has greatly reduced bifurcating activity compared to NfnI. The lack of electron transfer into the S-FAD of NfnII due to its crossed half-potentials prevents successive bifurcation activity and indicates that electron transfer within the high-potential branch gates bifurcation activity in NfnI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis of multicomponent oxygen evolution reaction coatings via block copolymer templating with vapor- and solution-phase precursors

Porous mixed transition metal oxide heterostructures are promising electrocatalysts due to their high surface area. However, achieving conformal multicomponent oxide coatings with controlled nanoscale architectures remains challenging. Here, we report a synthesis strategy that integrates solution-based swelling infiltration (SBI) with gas-phase sequential infiltration synthesis (SIS) in a block copolymer template to fabricate porous, high-surface-area, conformal mixed-oxide electrocatalytic coatings. In this approach, a PS75-P4VP25 block copolymer (BCP) film is first infiltrated with transition metal acetylacetonate precursors via SBI, followed by exposure to gas phase precursors of ZnO via SIS process. Thermal annealing of the infiltrated BCP films converts them into all-inorganic Fe–ZnO, Fe–Co–ZnO, and Fe–Ni–ZnO coatings. Electrochemical testing on 70 nm thick conformal coatings demonstrates promising oxygen evolution reaction (OER) activity in alkaline media, with mass-specific current densities up to 1.0 × 10 5 mA/g at an overpotential of 330 mV (vs. RHE) at ultralow loading (~0.005 g/cm 2 ). Among the compositions, Fe–Co–ZnO and amorphous Fe–Ni–ZnO show the best OER performance, delivering current densities of 2.00 and 3.04 mA/cm 2 , respectively, compared to 1.52 mA/cm 2 for Fe–ZnO.. This work establishes SBI–SIS as a versatile route for fabricating nm-thin, high-performance multicomponent oxide heterostructures on cost-efficient supports, enabling efficient catalyst utilization in electrochemical energy conversion application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Lithiophilic CoF 2 @C hollow spheres towards spatial lithium deposition for stable lithium metal batteries

Lithium metal (LM) is a promising anode for next-generation batteries due to its high theoretical capacity and low electrode potential. Nonetheless, side reactions, volume change, and unwanted lithium dendrite growth seriously limit the practical application of LM. Herein, with the aid of a hard template approach, a novel lithiophilic CoF 2 -carbon hollow sphere (CoF 2 @C-HS) composite material is successfully prepared via a facile in-situ fluorination and etching strategy. The lithiophilic CoF 2 acts as nucleation sites to reduce nucleation overpotential as well as induces the spatial Li deposition and the formation of LiF-rich solid electrolyte interphase (SEI), and the hollow carbon matrix can enhance the electrical conductivity and offer free space for LM deposition. Theoretical simulations reveal that the synergistic effect of lithiophilic CoF 2 and hollow carbon matrix homogenizes the electric field distribution and Li + flux. Benefiting from these advantages, the CoF 2 @C-HS-modified copper substrate electrode delivers an enhanced Coulombic efficiency (CE) of 93.7% for 280 cycles at 1 mA cm –2 and 1 mA h cm –2 . The symmetrical cell using CoF 2 @C-HS can stably cycle more than 1800 h with a low voltage hysteresis of 11 mV at a current density of 0.5 mA cm –2 and an areal capacity of 0.5 mA h cm –2 . Moreover, the Li@CoF 2 @C-HS composite anode enables more than 300 stable cycles at 1 C with a capacity retention of 95% in LiFePO 4 -based full cell and 110 stable cycles at 1 C in LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811)-based high-voltage full cell. Finally, this work might shed a new light on designing lithiophilic hosts to spatially confine LM deposition, realizing dendrite-free LM anodes and the practical applications of LM batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Nanochannel electrodes facilitating interfacial transport for PEM water electrolysis

Proton-exchange membrane water electrolyzers (PEMWEs) are a promising technology for green hydrogen production; however, interfacial transport behaviors are poorly understood, hindering device performance and longevity. Here, we first utilized finite-gap electrolyzer to demonstrate the possibility of proton transfer through water in PEMWEs. The measured high-frequency resistances (HFRs) exhibit a linear trend with increasing gap distance, where extrapolation shows a lower value compared with HFRs in regular zero-gap electrolyzers, indicating that ohmic resistance could be further reduced. We introduce nanochannels to facilitate mass transport, as evidenced by both liquid-fed and vapor-fed electrolysis. Nanochannel electrodes achieve a voltage reduction of 190 mV at 9 A·cm –2 compared with the Ir-PTEs without nanochannels. Furthermore, nanochannel electrodes show negligible degradation through 100,000 accelerated-stress tests and over 2,000 h of operation at 1.8 A·cm –2 with a decay rate of 11.66 μV·h –1 . These results provide new insights into localized transport dynamics for PEMWEs and highlight the significance of interfacial engineering for electrochemical devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ultra-stable trimetallic phosphide heterostructure with regulated electronic structure for overall water splitting at high current densities

Developing ultra-stable electrocatalysts for highly efficient overall water splitting at high current density (HCD) is critical for renewable hydrogen/oxygen production in the industry. However, the most active electrocatalysts for large current-driven water splitting are seriously handicapped by insufficient electrical contact kinetics due to the intensive bubble overflow. Herein, we demonstrate the ultra-stable trimetallic phosphides of NiFeP/NiCoP catalysts on a hydrophilic Ni foam skeleton via a corrosion-hydrothermal-phosphating strategy. The optimized NiFeP/NiCoP catalyst stabilizes for 600 h at -1 A cm -2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline solution, and it only needs low overpotentials of 237 and 314 mV to drive HER and OER at 1 A cm -2 , respectively. As expected, the optimized NiFeP/NiCoP electrode maintains 1000 h at 0.5 A cm -2 for water splitting, ranking among the top performers among reported catalysts. Such excellent performance could be attributed to the fast electron transfer for electrochemical reactions, the electron-deficient Fe/Ni sites contribute to forming robust metal oxyhydroxide during OER, and electron-rich Co sites facilitate H adsorption during HER. In conclusion, the findings present a highly promising candidate for ultra-stable non-noble metal electrocatalysts, offering a viable option for hydrogen/oxygen supply for fuel cells and metal-air batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Performance improvement of proton exchange membrane water electrolysis by surface modification of porous transport layers

Proton exchange membrane water electrolysis (PEMWE) is a promising option for hydrogen production from a variety of energy sources. Cost-effective production of hydrogen with PEMWE requires reduction of costly precious metals as well as optimization of the components and interfaces in the cell. The interface between the platinum-coated titanium porous transport layer (PTL) and catalyst layer (CL) significantly impacts the performance of the electrolyzer cell. Here, we report on two PTL modification methods, mechanical abrasion and chemical etching, which we find improve PEMWE performance by lowering the resistance of the PTL/CL interface. The PTL surface modifications enabled performance improvements up to 77 mV at 4 A cm −2 and reduction of the high frequency resistance, demonstrating that the resistance of the PTL/CL interface is a significant factor in the cell performance. The PTL surface roughness was varied using abrasive materials ranging from 0.1 to 140 μm in grain sizes and chemical etching was found to also increase the surface roughness. The surface roughness was quantified using confocal laser microscopy and the surface oxidation was measured using X-ray photoemission spectroscopy. These results demonstrate that both increasing surface roughness and oxide removal contribute to lowering the PTL/CL interfacial resistance and increasing cell performance.

08 HYDROGEN↗
DOE OSTI2025

Composite biopolymer electrolytes for high-performance reversible zinc-air batteries

Zinc-air batteries (ZABs) are regarded as one of the most promising candidates for next-generation energy storage systems due to their inherent safety, high energy density, and low cost. In this study, we optimized the composition of gel polymer electrolytes (GPEs), which play a crucial role in enhancing ZAB reversibility due to their water retention capabilities. The GPEs are synthesized using a combination of polyacrylic acid (PAA), polyacrylamide (PAM), and biopolymer kappa-carrageenan (KC), with and without additional additives. Among these, the composite GPE containing KC, PAA, and PAM demonstrated superior ionic conductivity (6.68 mS/cm at 30 °C) and enhanced water retention compared to the PAA–PAM-based GPE. Furthermore, this composite electrolyte operates within a wider electrochemical window of −1.0 V–2.2 V. A bifunctional catalyst, nickel–iron layered double hydroxide (NiFe-LDH), is electrochemically synthesized on a modified activated carbon cloth (CC). The catalyst loading is optimized based on oxygen evolution reaction (OER) performance, showing an overpotential of 555 mV. The oxygen reduction reaction (ORR) occurred at a half-wave potential of 0.620 V, which is lower than that of Pt/C (0.852 V), indicating better catalytic activity. The KC based cell exhibit better cycling stability than PAA–PAM-based GPE. The electrochemical performance of ZAB cells is evaluated under various atmospheres: ambient air and humid conditions and temperatures. Notably, in a humid environment, the cells achieved extended cycling stability, operating for over 500 h—significantly longer than under open-air conditions. Overall, this study highlights the importance of tailored GPE design and efficient bifunctional catalysts to enhance the performance and longevity of zinc-air batteries for long-duration energy storage applications.

Catalyst↗
DOE OSTI2026

Trace levels of PtRu on NiMo foam electrodes towards hydrogen evolution reaction

Electrochemical water splitting plays a critical role in high purity hydrogen production. To lower capital cost and energy consumption, efficient catalysts are required to boost the hydrogen evolution reaction (HER), especially in alkaline media. Although PtRu alloy materials are still considered the state-of-the-art catalyst for the HER under alkaline media, large-scale application is hindered by its scarcity and high cost. NiMo alloy catalysts can be potential Pt-free alternatives to drive the sluggish kinetics of the HER under alkaline media, but their HER activity is still not ideal due to the limitation of Volmer step. Herein, we investigated the impact of trace levels of PtRu catalysts on NiMo electrodes towards the HER by incorporating advantages of both PtRu and NiMo catalysts to minimize cost and maintain a promising HER activity. Trace levels of PtRu catalysts from 0.0173 to 0.2648 mg cm −2 were loaded on commercial NiMo foam electrodes by a facile electrodeposition technique utilizing ppm concentration levels of PtRu in electrolyte. The results show that 0.0173 mg cm −2 PtRu loading on NiMo electrode can significantly enhance HER activity compared to the pristine NiMo foam electrode (Tafel slopes drop from ∼170 to ∼60 mV dec −1 ) due to the remarkable decline of energy barriers towards water dissociation and hydrogen adsorption. Meanwhile, the rate determining step (RDS) switches from the Volmer step to the Heyrovsky step when the PtRu loading increases to 0.0675 mg cm −2 . Promising catalytic stability is observed at 100 mA cm −2 over the course of 50 h with a PtRu loading of 0.1198 mg cm −2 . In conclusion, this work demonstrates a potential strategy to decrease the cost and simultaneously maintain superior HER performance by integrating trace levels of PtRu catalyst with NiMo foam electrodes.

Electrochemical water splitting↗
DOE OSTI2025

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗