Search NASA⌕ Search

SEARCH · Search NASA

Results for “Marginal Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

SU-E-T-135: Assessing the Clinical Impact of Approximations in Analytical Dose Calculations for Proton Therapy

Purpose: To estimate the clinical relevance of approximations made in analytical dose calculation methods (ADCs) used for treatment planning on tumor coverage and tumor control probability (TCP) in proton therapy. Methods: We compared dose distributions planned with ADC to delivered dose distributions (as determined by TOPAS Monte Carlo (MC) simulations). We investigated 10 patients per site for 5 treatment sites (head-and-neck, lung, breast, prostate, liver). We evaluated differences between the two dose distributions analyzing dosimetric indices based on the dose-volume-histograms, the γ-index and the TCP. The normal tissue complication probability (NTCP) was estimated for the bladder and anterior rectum for the prostate patients. Results: We find that the target doses are overestimated by the ADC by 1–2% on average for all patients considered. All dosimetric indices (the mean dose, D95, D50 and D02, the dose values covering 95%, 50% and 2% of the target volume, respectively) are predicted within 5% of the delivered dose. A γ-index with a 3%/3mm criteria had a passing rate for target volumes above 96% for all patients. The TCP predicted by the two algorithms was up to 2%, 2.5%, 6%, 6.5%, and 11% for liver and breast, prostate, head-and-neck and lung patients, respectively. Differences in NTCP for anterior-rectum and bladder for prostate patients were less than 3%. Conclusion: We show that ADC provide adequate dose distributions for most patients, however, they can Result in underdosage of the target by as much as 5%. The TCP was found to be up to 11% lower than predicted. Advanced dose-calculation methods like MC simulations may be necessary in proton therapy to ensure target coverage for heterogeneous patient geometries, in clinical trials comparing proton therapy to conventional radiotherapy to avoid biases due to systematic discrepancies in calculated dose distributions, and, if tighter range margins are considered. Fully funded by NIH grants.

60 APPLIED LIFE SCIENCES↗

Search for differences between radio-loud and radio-quiet gamma-ray pulsar populations with Fermi-LAT data

Observations by the Fermi-Large Area Telescope (LAT) have enabled us to explore the population of non-recycled gamma-ray pulsars with a set of 112 objects. It was recently noted that there are apparent differences in the properties of radio-quiet and radio-loud subsets. In particular, the average observed radio-loud pulsar is younger than the average radio-quiet one and is located at lower Galactic latitude. Even so, the analysis based on the full list of pulsars may suffer from selection effects. Namely, most radio-loud pulsars are first discovered in the radio band, while radio-quiet ones are found using the gamma-ray data. In this work we perform a blind search for gamma-ray pulsars using the Fermi-LAT data alone, using all point sources from the 3FGL catalog as the candidates. Unlike our previous work, the present catalog is constructed with a semi-coherent method based on the time-differencing technique and covers the full range of characteristic ages down to 1 kyr. The search resulted in a catalog of 40 non-recycled pulsars, 25 of which are radio-quiet. All pulsars found in the search were previously known gamma-ray pulsars. We find no statistically significant differences in age or in distributions in Galactic latitude for the radio-loud and radio-quiet pulsars, while the distributions in rotation period are marginally different with a statistical probability of 4×10{sup −3}. The fraction of radio-quiet pulsars is estimated as ϵ{sub RQ}=(63±8)%. The results are in agreement with the predictions of the outer magnetosphere models, while the polar cap models are disfavored.

79 ASTRONOMY AND ASTROPHYSICS↗

Polycyclic Aromatic Hydrocarbons in Protoplanetary Disks around Herbig Ae/Be and T Tauri Stars

A distinct set of broad emission features at 3.3, 6.2, 7.7, 8.6, 11.3, and 12.7 μm, is often detected in protoplanetary disks (PPDs). These features are commonly attributed to polycyclic aromatic hydrocarbons (PAHs). We model these emission features in the infrared spectra of 69 PPDs around 14 T Tauri and 55 Herbig Ae/Be stars in terms of astronomical PAHs. For each PPD, we derive the size distribution and the charge state of the PAHs. We then examine the correlations of the PAH properties (i.e., sizes and ionization fractions) with the stellar properties (e.g., stellar effective temperature, luminosity, and mass). We find that the characteristic size of the PAHs tends to correlate with the stellar effective temperature (T{sub eff}) and interpret this as the preferential photodissociation of small PAHs in systems with higher T{sub eff} of which the stellar photons are more energetic. In addition, the PAH size shows a moderate correlation with the red-ward wavelength shift of the 7.7 μm PAH feature that is commonly observed in disks around cool stars. The ionization fraction of PAHs does not seem to correlate with any stellar parameters. This is because the charging of PAHs depends on not only the stellar properties (e.g., T{sub eff}, luminosity) but also their spatial distribution in the disks. The marginally negative correlation between PAH size and stellar age suggests that continuous replenishment of PAHs via the outgassing of cometary bodies and/or the collisional grinding of planetesimals and asteroids is required to maintain the abundance of small PAHs against complete destruction by photodissociation.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploiting non-linear scales in galaxy–galaxy lensing and galaxy clustering: A forecast for the dark energy survey

ABSTRACT The combination of galaxy–galaxy lensing (GGL) and galaxy clustering is a powerful probe of low-redshift matter clustering, especially if it is extended to the non-linear regime. To this end, we use an N-body and halo occupation distribution (HOD) emulator method to model the redMaGiC sample of colour-selected passive galaxies in the Dark Energy Survey (DES), adding parameters that describe central galaxy incompleteness, galaxy assembly bias, and a scale-independent multiplicative lensing bias Alens. We use this emulator to forecast cosmological constraints attainable from the GGL surface density profile ΔΣ(rp) and the projected galaxy correlation function wp, gg(rp) in the final (Year 6) DES data set over scales $r_p=0.3\!-\!30.0\, h^{-1} \, \mathrm{Mpc}$. For a $3{{\ \rm per\ cent}}$ prior on Alens we forecast precisions of $1.9{{\ \rm per\ cent}}$, $2.0{{\ \rm per\ cent}}$, and $1.9{{\ \rm per\ cent}}$ on Ωm, σ8, and $S_8 \equiv \sigma _8\Omega _m^{0.5}$, marginalized over all halo occupation distribution (HOD) parameters as well as Alens. Adding scales $r_p=0.3\!-\!3.0\, h^{-1} \, \mathrm{Mpc}$ improves the S8 precision by a factor of ∼1.6 relative to a large scale ($3.0\!-\!30.0\, h^{-1} \, \mathrm{Mpc}$) analysis, equivalent to increasing the survey area by a factor of ∼2.6. Sharpening the Alens prior to $1{{\ \rm per\ cent}}$ further improves the S8 precision to $1.1{{\ \rm per\ cent}}$, and it amplifies the gain from including non-linear scales. Our emulator achieves per cent-level accuracy similar to the projected DES statistical uncertainties, demonstrating the feasibility of a fully non-linear analysis. Obtaining precise parameter constraints from multiple galaxy types and from measurements that span linear and non-linear clustering offers many opportunities for internal cross-checks, which can diagnose systematics and demonstrate the robustness of cosmological results.

79 ASTRONOMY AND ASTROPHYSICS↗

Compressive deformation behavior and strain rate sensitivity of Al-cenosphere hybrid foam with mono-modal, bi-modal and tri-modal cenosphere size distribution

Highlights: • Cenospheres of different size ranges and distributions are used in hybrid aluminium foam. • Microstructure and deformation response of hybrid foam cenosphere size distribution. • Hybrid foam with bi or tri-modal cenosphere distribution exhibits higher strength and energy absorption. • The plateau stresses and energy absorption increased marginally with strain rate. • In case of bi- or tri-modal size distribution, strain rate sensitivity and strain rate sensitivity parameter is marginally lower. - Abstract: AlSi12Cu1Mg1 aluminium alloy-cenosphere closed cell hybrid foams with different kinds of cenosphere size distribution (mono-modal, bi-modal and tri-modal) are used to see the effect of cenosphere size distribution on their deformation behavior under quasi static compressive loading conditions at different strain rates. The stress strain curves are almost similar type irrespective of the cenosphere size distribution and strain rate. However, the plateau stress and energy absorption increased significantly when one used bi-modal and or tri-modal cenosphere size distribution instead of mono-modal cenosphere size distribution. These plateau stresses and energy absorption also increased marginally with strain rate. The densification strain remained almost invariant with strain rate and cenosphere size distribution. The strain rate sensitivity and strain rate sensitivity parameter is relatively lower in case of bi-modal and tri-modal cenosphere size distribution particularly at higher relative density.

36 MATERIALS SCIENCE↗

Convex relaxation for Fokker–Planck equation

We propose an approach to directly estimate the moments or marginals for a high-dimensional equilibrium distribution in statistical mechanics by solving the high-dimensional Fokker–Planck equation in terms of low-order cluster moments or marginals. With this approach, we bypass the exponential complexity of estimating the full high-dimensional distribution and directly solve the simplified partial differential equations for low-order moments/marginals. Moreover, the proposed moment/marginal relaxation is fully convex and can be solved via off-the-shelf solvers. We further propose a time-dependent version of the convex programs to study non-equilibrium dynamics. In a specific setting, we show the proposed method can recover a mean-field-type equilibrium density. Numerical results are provided to demonstrate the performance of the proposed algorithm for high-dimensional systems.

Chen, Yian↗

The Oak Ridge Competitive Electricity Dispatch (ORCED) Model Version 9

The Oak Ridge Competitive Electricity Dispatch (ORCED) model dispatches power plants in a region to meet the electricity demands for any single given year up to 2030. It uses publicly available sources of data describing electric power units such as the National Energy Modeling System and hourly demands from utility submittals to the Federal Energy Regulatory Commission that are projected to a future year. The model simulates a single region of the country for a given year, matching generation to demands and predefined net exports from the region, assuming no transmission constraints within the region. ORCED can calculate a number of key financial and operating parameters for generating units and regional market outputs including average and marginal prices, air emissions, and generation adequacy. By running the model with and without changes such as generation plants, fuel prices, emission costs, plug-in hybrid electric vehicles, distributed generation, or demand response, the marginal impact of these changes can be found.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The weak lensing signal and the clustering of BOSS galaxies. II. Astrophysical and cosmological constraints

We perform a joint analysis of the abundance, the clustering, and the galaxy–galaxy lensing signal of galaxies measured from Data Release 11 of the Sloan Digital Sky Survey III Baryon Oscillation Spectroscopic Survey in our companion paper, Miyatake et al. The lensing signal was obtained by using the shape catalog of background galaxies from the Canada France Hawaii Telescope Legacy Survey, which was made publicly available by the CFHTLenS collaboration, with an area overlap of about 105 deg{sup 2}. We analyze the data in the framework of the halo model in order to fit halo occupation parameters and cosmological parameters (Ω{sub m} and σ{sub 8}) to these observables simultaneously, and thus break the degeneracy between galaxy bias and cosmology. Adopting a flat ΛCDM cosmology with priors on Ω{sub b}h{sup 2}, n{sub s}, and h from the analysis of WMAP 9 yr data, we obtain constraints on the stellar mass–halo mass relation of galaxies in our sample. Marginalizing over the halo occupation distribution parameters and a number of other nuisance parameters in our model, we obtain Ω{sub m}=0.310{sub −0.020}{sup +0.019} and σ{sub 8}=0.785{sub −0.044}{sup +0.044} (68% confidence). We demonstrate the robustness of our results with respect to sample selection and a variety of systematics such as the halo off-centering effect and possible incompleteness in our sample. Our constraints are consistent, complementary, and competitive with those obtained using other independent probes of these cosmological parameters. The cosmological analysis is the first of its kind to be performed at a redshift as high as 0.53.

79 ASTRONOMY AND ASTROPHYSICS↗

A METHOD TO SEARCH FOR BULK MOTIONS IN THE ICM WITH CHANDRA CCD SPECTRA: APPLICATION TO THE BULLET CLUSTER

We propose a strategy to search for bulk motions in the intracluster medium (ICM) of merging clusters based on Chandra CCD data. Our goal is to derive robust measurements of the average redshift of projected ICM regions obtained from the centroid of the K{sub α} line emission. We thoroughly explore the effect of the unknown temperature structure along the line of sight to accurately evaluate the systematic uncertainties on the ICM redshift. We apply our method to the “Bullet cluster” (1E 0657-56). We directly identify 23 independent regions on the basis of the surface brightness contours, and measure the redshift of the ICM averaged along the line of sight in each. We find that the redshift distribution across these regions is marginally inconsistent with the null hypothesis of a constant redshift or no bulk motion in the ICM, at a confidence level of about 2σ. We tentatively identify the regions most likely affected by bulk motions and find a maximum velocity gradient of about (46 ± 13) km s{sup −1} kpc{sup −1} along the line of sight on a scale of ∼260 kpc along the path of the “bullet.” We interpret this as the possible signature of a significant mass of ICM pushed away along a direction perpendicular to the merging. This preliminary result is promising for a systematic search for bulk motions in bright, moderate-redshift clusters based on spatially resolved spectral analysis of Chandra CCD data.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved Search for ν̄ μ →ν̄ e Oscillations in the MiniBooNE Experiment

The MiniBooNE experiment at Fermilab reports results from an analysis of ν¯ e appearance data from 11.27×10²⁰ protons on target in the antineutrino mode, an increase of approximately a factor of 2 over the previously reported results. An event excess of 78.4±28.5 events (2.8σ) is observed in the energy range 200 QE ν <1250 MeV. If interpreted in a two-neutrino oscillation model, ν¯ μ →ν¯ e , the best oscillation fit to the excess has a probability of 66% while the background-only fit has a χ² probability of 0.5% relative to the best fit. The data are consistent with antineutrino oscillations in the 0.01<Δm²<1.0 eV² range and have some overlap with the evidence for antineutrino oscillations from the Liquid Scintillator Neutrino Detector. All of the major backgrounds are constrained by in situ event measurements so nonoscillation explanations would need to invoke new anomalous background processes. The neutrino mode running also shows an excess at low energy of 162.0±47.8 events (3.4σ) but the energy distribution of the excess is marginally compatible with a simple two neutrino oscillation formalism. Expanded models with several sterile neutrinos can reduce the incompatibility by allowing for CP violating effects between neutrino and antineutrino oscillations.

Aguilar-Arevalo, A. A.↗

WE-D-17A-03: Improvement of Accuracy of Spot-Scanning Proton Beam Delivery for Liver Tumor by Real-Time Tumor-Monitoring and Gating System: A Simulation Study

Purpose: To improve the accuracy of spot-scanning proton beam delivery for target in motion, a real-time tumor-monitoring and gating system using fluoroscopy images was developed. This study investigates the efficacy of this method for treatment of liver tumors using simulation. Methods: Three-dimensional position of a fiducial marker inserted close to the tumor is calculated in real time and proton beam is gated according to the marker's distance from the planned position (Shirato, 2012). The efficient beam delivery is realized even for the irregular and sporadic motion signals, by employing the multiple-gated irradiations per operation cycle (Umezawa, 2012). For each of two breath-hold CTs (CTV=14.6cc, 63.1cc), dose distributions were calculated with internal margins corresponding to freebreathing (FB) and real-time gating (RG) with a 2-mm gating window. We applied 8 trajectories of liver tumor recorded during the treatment of RTRT in X-ray therapy and 6 initial timings. Dmax/Dmin in CTV, mean liver dose (MLD), and irradiation time to administer 3 Gy (RBE) dose were estimated assuming rigid motion of targets by using in-house simulation tools and VQA treatment planning system (Hitachi, Ltd., Tokyo). Results: Dmax/Dmin was degraded by less than 5% compared to the prescribed dose with all motion parameters for smaller CTV and less than 7% for larger CTV with one exception. Irradiation time showed only a modest increase if RG was used instead of FB; the average value over motion parameters was 113 (FB) and 138 s (RG) for smaller CTV and 120 (FB) and 207 s (RG) for larger CTV. In RG, it was within 5 min for all but one trajectory. MLD was markedly decreased by 14% and 5–6% for smaller and larger CTVs respectively, if RG was applied. Conclusions: Spot-scanning proton beam was shown to be delivered successfully to liver tumor without much lengthening of treatment time. This research was supported by the Cabinet Office, Government of Japan and the Japan Society for the Promotion of Science (JSPS) through the Funding Program for World-Leading Innovative R and D on Science and Technology (FIRST Program), initiated by the Council for Science and Technology Policy (CSTP)

60 APPLIED LIFE SCIENCES↗

Challenges in Markov Chain Monte Carlo for Bayesian Neural Networks

Markov chain Monte Carlo (MCMC) methods have not been broadly adopted in Bayesian neural networks (BNNs). This paper initially reviews the main challenges in sampling from the parameter posterior of a neural network via MCMC. Such challenges culminate to lack of convergence to the parameter posterior. Nevertheless, this paper shows that a nonconverged Markov chain, generated via MCMC sampling from the parameter space of a neural network, can yield via Bayesian marginalization a valuable posterior predictive distribution of the output of the neural network. Further, classification examples based on multilayer perceptrons showcase highly accurate posterior predictive distributions. The postulate of limited scope for MCMC developments in BNNs is partially valid; an asymptotically exact parameter posterior seems less plausible, yet an accurate posterior predictive distribution is a tenable research avenue.

97 MATHEMATICS AND COMPUTING↗

Recommendations for Tritium Science and Technology Research and Development in Support of the Tritium Readiness Campaign, TTP-7-084

Between 2006 and 2012 the Tritium Readiness Campaign Development and Testing Program produced significant advances in the understanding of in-reactor TPBAR performance. Incorporating these data into existing TPBAR performance models has improved permeation predictions, and the discrepancy between predicted and observed tritium permeation in the WBN1 coolant has been decreased by about 30%. However, important differences between predicted and observed permeation still remain, and there are significant knowledge gaps that hinder the ability to reliably predict other aspects of TPBAR performance such as tritium distribution, component integrity, and performance margins. Based on recommendations from recent Tritium Readiness Campaign workshops and reviews coupled with technical and programmatic priorities, high-priority activities were identified to address knowledge gaps in the near- (3-5 year), middle- (5-10 year), and long-term (10+ year) time horizons. It is important to note that there are many aspects to a well-integrated research and development program. The intent is not to focus exclusively on one aspect or another, but to approach the program in a holistic fashion. Thus, in addition to small-scale tritium science studies, ex-reactor tritium technology experiments such as TMED, and large-scale in-reactor tritium technology experiments such as TMIST, a well-rounded research and development program must also include continued analysis of WBN1 performance data and post-irradiation examination of TPBARs and lead use assemblies to evaluate model improvements and compare separate-effects and integral component behavior.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Inventory of AI-ready Benchmark Data for US Fires, Heatwaves, and Droughts

Extreme weather events, including fires, heatwaves, and droughts, have significant impacts on earth, environmental, and energy systems. Mechanistic and predictive understanding, as well as probabilistic risk assessment of these extreme weather events, are crucial for detecting, planning for, and responding to these extremes. Records of extreme weather events provide an important data source for understanding present and future extremes, but the existing data needs preprocessing before it can be used for analysis. Moreover, there are many nonstandard metrics defining the levels of severity or impacts of extremes. In this study, we compile a comprehensive benchmark data inventory of extreme weather events, including fires, heatwaves, and droughts. The dataset covers the period from 2001 to 2020 with a daily temporal resolution and a spatial resolution of 0.5°×0.5° (~55km×55km) over the continental United States (CONUS), and a spatial resolution of 1km × 1km over the Pacific Northwest (PNW) region, together with the co-located and relevant meteorological variables. By exploring and summarizing the spatial and temporal patterns of these extremes in various forms of marginal, conditional, and joint probability distributions, we gain a better understanding of the characteristics of climate extremes. The resulting AI/ML-ready data products can be readily applied to ML-based research, fostering and encouraging AI/ML research in the field of extreme weather. This study can contribute significantly to the advancement of extreme weather research, aiding researchers, policymakers, and practitioners in developing improved preparedness and response strategies to protect communities and ecosystems from the adverse impacts of extreme weather events.

54 ENVIRONMENTAL SCIENCES↗

An Inventory of AI-ready Benchmark Data for US Fires, Heatwaves, and Droughts

Extreme weather events, including fires, heatwaves, and droughts, have significant impacts on earth, environmental, and energy systems. Mechanistic and predictive understanding, as well as probabilistic risk assessment of these extreme weather events, are crucial for detecting, planning for, and responding to these extremes. Records of extreme weather events provide an important data source for understanding present and future extremes, but the existing data needs preprocessing before it can be used for analysis. Moreover, there are many nonstandard metrics defining the levels of severity or impacts of extremes. In this study, we compile a comprehensive benchmark data inventory of extreme weather events, including fires, heatwaves, and droughts. The dataset covers the period from 2001 to 2020 with a daily temporal resolution and a spatial resolution of 0.5°×0.5° (~55km×55km) over the continental United States (CONUS), and a spatial resolution of 1km × 1km over the Pacific Northwest (PNW) region, together with the co-located and relevant meteorological variables. By exploring and summarizing the spatial and temporal patterns of these extremes in various forms of marginal, conditional, and joint probability distributions, we gain a better understanding of the characteristics of climate extremes. The resulting AI/ML-ready data products can be readily applied to ML-based research, fostering and encouraging AI/ML research in the field of extreme weather. This study can contribute significantly to the advancement of extreme weather research, aiding researchers, policymakers, and practitioners in developing improved preparedness and response strategies to protect communities and ecosystems from the adverse impacts of extreme weather events. Usage Notes We presented a long term (2001-2020) and comprehensive data inventory of historical extreme events with daily temporal resolution covering the separate spatial extents of CONUS (0.5°×0.5°) and PNW(1km×1km) for various applications and studies. The dataset with 0.5°×0.5° resolution for CONUS can be used to help build more accurate climate models for the entire CONUS, which can help in understanding long-term climate trends, including changes in the frequency and intensity of extreme events, predicting future extreme events as well as understanding the implications of extreme events on society and the environment. The data can also be applied for risk accessment of the extremes. For example, ML/AI models can be developed to predict wildfire risk or forecast HWs by analyzing historical weather data, and past fires or heateave , allowing for early warnings and risk mitigation strategies. Using this dataset, AI-driven risk assessment models can also be built to identify vulnerable energy and utilities infrastructure, imrpove grid resilience and suggest adaptations to withstand extreme weather events. The high-resolution 1km×1km dataset ove PNW are advantageous for real-time, localized and detailed applications. It can enhance the accuracy of early warning systems for extreme weather events, helping authorities and communities prepare for and respond to disasters more effectively. For example, ML models can be developed to provide localized HW predictions for specific neighborhoods or cities, enabling residents and local emergency services to take targeted actions; the assessment of drought severity in specific communities or watersheds within the PNW can help local authorities manage water resources more effectively.

Lin, Xinming↗

Statistical Association between the Candidate Repeating FRB 20200320A and a Galaxy Group

Abstract We present results from angular cross correlations between select samples of CHIME/FRB repeaters and galaxies in three photometric galaxy surveys, which have shown correlations with the first CHIME/FRB catalog containing repeating and nonrepeating sources: Wide-field Infrared Survey Explorer (WISE) × SCOS, DESI-BGS, and DESI-LRG. We find a statistically significant correlation (p-value <0.001, after accounting for look-elsewhere factors) between a sample of repeaters with an extragalactic dispersion measure (DM) > 395 pc cm −3 and WISE × SCOS galaxies with redshiftz> 0.275. We demonstrate that the correlation arises surprisingly because of a statistical association between FRB 20200320A (extragalactic DM ≈ 550 pc cm −3 ) and a galaxy group in the same dark matter halo at redshiftz≈ 0.32. We estimate that the host halo, along with an intervening halo at redshiftz≈ 0.12, accounts for at least ∼30% of the extragalactic DM. Our results strongly motivate incorporating galaxy group and cluster catalogs into direct host association pipelines for FRBs with ≲ 1 ′ localization precision, effectively utilizing the two-point information to constrain FRB properties such as their redshift and DM distributions. In addition, we find marginal evidence for a negative correlation at 99.4% confidence limit between a sample of repeating FRBs with baseband data (median extragalactic DM = 354 pc cm −3 ) and DESI-LRG galaxies with redshift 0.3 ≤z< 0.45, suggesting that the repeaters might be more prone than apparent nonrepeaters to propagation effects in FRB–galaxy correlations due to intervening free electrons over angular scales ∼0.°5.

Astronomy & Astrophysics↗

How Dusty Is Alpha Centauri? Excess or Non-excess over the Infrared Photospheres of Main-sequence Stars

Context. Debris discs around main-sequence stars indicate the presence of larger rocky bodies. The components of the nearby, solar-type binary Centauri have metallicities that are higher than solar, which is thought to promote giant planet formation. Aims. We aim to determine the level of emission from debris around the stars in the Cen system. This requires knowledge of their photospheres.Having already detected the temperature minimum, Tmin, of CenA at far-infrared wavelengths, we here attempt to do the same for the moreactive companion Cen B. Using the Cen stars as templates, we study the possible eects that Tmin may have on the detectability of unresolveddust discs around other stars. Methods.We used Herschel-PACS, Herschel-SPIRE, and APEX-LABOCA photometry to determine the stellar spectral energy distributions in thefar infrared and submillimetre. In addition, we used APEX-SHeFI observations for spectral line mapping to study the complex background around Cen seen in the photometric images. Models of stellar atmospheres and of particulate discs, based on particle simulations and in conjunctionwith radiative transfer calculations, were used to estimate the amount of debris around these stars. Results. For solar-type stars more distant than Cen, a fractional dust luminosity fd LdustLstar 2 107 could account for SEDs that do not exhibit the Tmin eect. This is comparable to estimates of fd for the Edgeworth-Kuiper belt of the solar system. In contrast to the far infrared,slight excesses at the 2:5 level are observed at 24 m for both CenA and B, which, if interpreted as due to zodiacal-type dust emission, wouldcorrespond to fd (13) 105, i.e. some 102 times that of the local zodiacal cloud. Assuming simple power-law size distributions of the dustgrains, dynamical disc modelling leads to rough mass estimates of the putative Zodi belts around the Cen stars, viz.4106 M$ of 4 to 1000 msize grains, distributed according to n(a) a3:5. Similarly, for filled-in Tmin emission, corresponding Edgeworth-Kuiper belts could account for103 M$ of dust. Conclusions. Our far-infrared observations lead to estimates of upper limits to the amount of circumstellar dust around the stars CenA and B.Light scattered andor thermally emitted by exo-Zodi discs will have profound implications for future spectroscopic missions designed to searchfor biomarkers in the atmospheres of Earth-like planets. The far-infrared spectral energy distribution of Cen B is marginally consistent with thepresence of a minimum temperature region in the upper atmosphere of the star. We also show that an Cen A-like temperature minimum mayresult in an erroneous apprehension about the presence of dust around other, more distant stars.

metallicities↗

Correlated Trajectory Uncertainty for Adaptive Sequential Decision Making

One of the great challenges with decision making tasks on real world systems is the fact that data is sparse and acquiring additional data is expensive. In these cases, it is often crucial to make a model of the environment to assist in making decisions. At the same time, limited data means that learned models are erroneous, making it just as important to equip the model with good predictive uncertainties. In the context of learning sequential decision making policies, these uncertainties can prove useful for informing which data to collect for the greatest improvement in policy performance \citep{mehta2021experimental, mehta2022exploration} or informing the policy about unsure regions of state and action space to avoid during test time \citep{yu2020mopo}. Additionally, assuming that realistic samples of the environment can be drawn, an adaptable policy can be trained that attempts to make optimal decisions for any given possible instance of the environment \citep{ghosh2022offline, chen2021offline}. In this work, we examine the so-called ``probabilistic neural network'' (PNN) model that is ubiquitous in model-based reinforcement learning (MBRL) works. We argue that while PNN models may have good marginal uncertainties, they form a distribution of non-smooth transition functions. Not only are these samples unrealistic and may hamper adaptability, but we also assert that this leads to poor uncertainty estimates when predicting multiple step trajectory estimates. To address this issue, we propose a simple sampling method that can be implemented on top of pre-existing models.We evaluate our sampling technique on a number of environments, including a realistic nuclear fusion task, and find that, not only do smooth transition function samples produce more calibrated uncertainties, but they also lead to better downstream performance for an adaptive policy.

Offline Reinforcement Learning↗