Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

X-Ray And Polarized Neutron Reflectometry: Characterization Of Si/Co/Si And Si/Ni/Si Systems

Technologically important metal silicides formed through interdiffusion in metal/Si systems has been probed using two complementary techniques viz. x-ray reflectivity (XRR) and polarized neutron reflectivity (PNR). Both structural and magnetic characterization with good depth resolution has been achieved in these systems. We have studied two systems Si/Co/Si and Si/Ni/Si which relate to important applications in ferromagnetic/ non-magnetic semiconductor layered structures for memory devices.

36 MATERIALS SCIENCE↗

Electrical-transport, magnetoresistance and magnetic properties of La{sub 0.7}Ca{sub 0.3}MnO{sub 3} and La{sub 0.7}Ca{sub 0.24}Sr{sub 0.06}MnO{sub 3} single crystals

We report the electrical-transport, magnetoresistance and magnetic properties of the hole doped La{sub 0.7}Ca{sub 0.3}MnO{sub 3} (LCMO) and La{sub 0.7}Ca{sub 0.24}Sr{sub 0.06}MnO{sub 3} (LCSMO) single crystals. It was prepared using floating zone technique. The resistivity data shows the metal to insulator transition (T{sub MI}) occurs at 211 K along c-axis and T{sub MI} = 185 K the ab-plane for LCMO and T{sub MI} = 290 K along the c-axis and T{sub MI} = 280 K along the ab-plane for LCSMO single crystals. It is observed that the T{sub MI} is higher along the c-axis as compared to that in the ab-plane, consequently signifying more favorable hoping of electrons is along the c-axis. The ac-susceptibility measurement shows that this material exhibits ferromagnetic to paramagnetic transition temperature (TC) at 206 K for LCMO and T{sub C} = 277 K for LCSMO single crystals. For magnetic memory device application point of view, the sample shows the maximum MR of 98% for LCMO and 80% for LCSMO single crystals at 8T applied magnetic field. Doping small amount of Sr (0.06%) reveals that the electronic and magnetic phase transition in CMR single crystal increases substantially and useful for device application. This is first time such type of comparative study in these manganite single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetization reversal assisted by half antivortex states in nanostructured circular cobalt disks

The half antivortex, a fundamental topological structure which determines magnetization reversal of submicron magnetic devices with domain walls, has been suggested also to play a crucial role in spin torque induced vortex core reversal in circular disks. Here, we report on magnetization reversal in circular disks with nanoholes through consecutive metastable states with half antivortices. In-plane anisotropic magnetoresistance and broadband susceptibility measurements accompanied by micromagnetic simulations reveal that cobalt (Co) disks with two and three linearly arranged nanoholes directed at 45° and 135° with respect to the external magnetic field show reproducible step-like changes in the anisotropic magnetoresistance and magnetic permeability due to transitions between different intermediate states mediated by vortices and half antivortices confined to the dot nanoholes and edges, respectively. Our findings are relevant for the development of multi-hole based spintronic and magnetic memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Random Spatial Fluctuation in Non-Uniform Crystalline Phases on the Device Variation of Ferroelectric FET

In this work, a comprehensive study of random spatial fluctuation of the ferroelectric (FE) phase and dielectric (DE) phase in FeFETs is conducted to understand its impact on device variation. It is found that: i) there exists a certain DE percentage threshold that below which the increase of the DE phase does not significantly impact the device memory window and variation and only above which evident device degradation can be observed; ii) increasing the DE phase increases the variation in the memory window and the coercive field distribution further exacerbates the variation, hence degrading the sensing margin; iii) decreasing the number of grains degrades the device variation, which calls for further grain size engineering for variation suppression.

42 ENGINEERING↗

Nonvolatile data storage using mechanical force-induced polarization switching in ferroelectric polymer

Ferroelectric polymers offer the promise of low-cost and flexible electronic products. They are attractive for information storage due to their spontaneous polarization which is usually switched by electric field. Here, we demonstrate that electrical signals can be readily written on ultra-thin ferroelectric polymer films by strain gradient-induced polarization switching (flexoelectric effect). A force with magnitude as small as 64nN is enough to induce highly localized (40 nm feature size) change in the polarization states. The methodology is capable of realizing nonvolatile memory devices with miniaturized cell size and storage density of tens to hundreds Gbit per square inch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal conductivity measurement of amorphous dielectric multilayers for phase-change memory power reduction

In this work, we investigate the temperature-dependent thermal conductivities of few nanometer thick alternating stacks of amorphous dielectrics, specifically SiO{sub 2}/Al{sub 2}O{sub 3} and SiO{sub 2}/Si{sub 3}N{sub 4}. Experiments using steady-state Joule-heating and electrical thermometry, while using a micro-miniature refrigerator over a wide temperature range (100–500 K), show that amorphous thin-film multilayer SiO{sub 2}/Si{sub 3}N{sub 4} and SiO{sub 2}/Al{sub 2}O{sub 3} exhibit through-plane room temperature effective thermal conductivities of about 1.14 and 0.48 W/(m × K), respectively. In the case of SiO{sub 2}/Al{sub 2}O{sub 3}, the reduced conductivity is attributed to lowered film density (7.03 → 5.44 × 10{sup 28 }m{sup –3} for SiO{sub 2} and 10.2 → 8.27 × 10{sup 28 }m{sup –3} for Al{sub 2}O{sub 3}) caused by atomic layer deposition of thin-films as well as a small, finite, and repeating thermal boundary resistance (TBR) of 1.5 m{sup 2} K/GW between dielectric layers. Molecular dynamics simulations reveal that vibrational mismatch between amorphous oxide layers is small, and that the TBR between layers is largely due to imperfect interfaces. Finally, the impact of using this multilayer dielectric in a dash-type phase-change memory device is studied using finite-element simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Irreversible magnetization switching at the onset of superconductivity in a superconductor ferromagnet hybrid

We demonstrate that the magnetic state of a superconducting spin valve, that is normally controlled with an external magnetic field, can also be manipulated by varying the temperature which increases the functionality and flexibility of such structures as switching elements. In this case, switching is driven by changes in the magnetostatic energy due to spontaneous Meissner screening currents forming in the superconductor below the critical temperature. Our scanning Hall probe measurements also reveal vortex-mediated pinning of the ferromagnetic domain structure due to the pinning of quantized stray fields in the adjacent superconductor. The ability to use temperature as well as magnetic field to control the local magnetisation structure raises the prospect of potential applications in magnetic memory devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonvolatile “AND,” “OR,” and “NOT” Boolean logic gates based on phase-change memory

Electronic devices or circuits that can implement both logic and memory functions are regarded as the building blocks for future massive parallel computing beyond von Neumann architecture. Here we proposed phase-change memory (PCM)-based nonvolatile logic gates capable of AND, OR, and NOT Boolean logic operations verified in SPICE simulations and circuit experiments. The logic operations are parallel computing and results can be stored directly in the states of the logic gates, facilitating the combination of computing and memory in the same circuit. These results are encouraging for ultralow-power and high-speed nonvolatile logic circuit design based on novel memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offsets between SiO{sub 2} and phase change materials in the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} pseudobinary system

The energy band alignment between stoichiometric phase change alloys residing along the pseudobinary line of GeTe-Sb{sub 2}Te{sub 3}[(GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x}] and SiO{sub 2} was obtained employing high-resolution x-ray photoelectron spectroscopy. The valence band offsets were determined using both the core-level spectra and valence band spectra in the analysis. The results obtained show that the band offsets vary with the composition of the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} alloy, exhibiting a parabolic dependence on the amount of GeTe in the alloy. Increasing the proportion of GeTe in the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} alloy was generally found to increase (decrease) the valence band (conduction band) offsets, while the binary alloys (GeTe, Sb{sub 2}Te{sub 3}) have similar band offset values. This information could be useful for phase change memory device design and optimization.

36 MATERIALS SCIENCE↗

Electric-field-controlled interface strain coupling and non-volatile resistance switching of La{sub 1-x}Ba{sub x}MnO₃ thin films epitaxially grown on relaxor-based ferroelectric single crystals

We have fabricated magnetoelectric heterostructures by growing ferromagnetic La{sub 1-x}Ba{sub x}MnO₃ (x=0.2, 0.4) thin films on (001)-, (110)-, and (111)-oriented 0.31Pb(In{sub 1/2}Nb{sub 1/2})O₃-0.35Pb(Mg{sub 1/3}Nb{sub 1/2})O₃-0.34PbTiO₃ (PINT) ferroelectric single-crystal substrates. Upon poling along the [001], [110], or [111] crystal direction, the electric-field-induced non-180° domain switching gives rise to a decrease in the resistance and an enhancement of the metal-to-insulator transition temperature T C of the films. By taking advantage of the 180° ferroelectric domain switching, we identify that such changes in the resistance and T C are caused by domain switching-induced strain but not domain switching-induced accumulation or depletion of charge carriers at the interface. Further, we found that the domain switching-induced strain effects can be efficiently controlled by a magnetic field, mediated by the electronic phase separation. Moreover, we determined the evolution of the strength of the electronic phase separation against temperature and magnetic field by recording the strain-tunability of the resistance [(ΔR/R){sub strain}] under magnetic fields. Additionally, opposing effects of domain switching-induced strain on ferromagnetism above and below 197 K for the La₀.₈Ba₀.₂MnO₃ film and 150 K for the La₀.₆Ba₀.₄MnO₃ film, respectively, were observed and explained by the magnetoelastic effect through adjusting the magnetic anisotropy. Finally, using the reversible ferroelastic domain switching of the PINT, we realized non-volatile resistance switching of the films at room temperature, implying potential applications of the magnetoelectric heterostructure in non-volatile memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective Control of the Charge and Magnetic States of Transition-Metal Atoms on Single-Layer Boron Nitride

Developing approaches to effectively control the charge and magnetic states is critical to the use of magnetic nanostructures in quantum information devices but is still challenging. Here we suggest that the magnetic and charge states of transition-metal (TM) doped single-layer boron-nitride (SLBN) systems can be easily controlled by the (internal) defect engineering and (external) electric fields (E{sub ext}). The relative positions and symmetries of the in-gap levels induced by defect engineering and the TM d-orbital energy levels effectively determine the charge states and magnetic properties of the TM/SLBN system. Remarkably, the application of an E{sub ext} can easily control the size of the crystal field splitting of the TM d orbitals and thus, leading to the spin crossover in TM/SLBN, which could be used as E{sub ext}-driven nonvolatile memory devices. Our conclusion obtained from TM/SLBN is valid generally in other TM adsorbed layered semiconductors.

36 MATERIALS SCIENCE↗

Magnetic memory based on La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7}/La{sub 0.7}Ca{sub 0.3}MnO{sub3} ferromagnet/superconductor hybrid structures.

We report a memory concept utilizing ferromagnet/superconductor/ferromagnet La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7}/La{sub 0.7}Ca{sub 0.3}MnO{sub 3} thin film hybrid structures. The orientation of the magnetic field with respect to the ferromagnetic easy axis has a strong effect on superconductivity as indicated by a strong variation in the magnetoresistance (MR). MR can be controlled by rotating a small magnetic field applied in the plane of the film in a way that is determined by the in-plane biaxial magnetic anisotropy. The proposed memory device has the advantages of superconducting detection elements (fast response and low dissipation), small (100-150 Oe) writing fields, and resistance read-out without need for applied field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of electrode material on characteristics of non-volatile resistive memory consisting of Ag{sub 2}S nanoparticles

In this study, Ag{sub 2}S nanoparticles are synthesized and used as the active material for two-terminal resistance switching memory devices. Sintered Ag{sub 2}S films are successfully crystallized on plastic substrates with synthesized Ag{sub 2}S nanoparticles, after a relatively low-temperature sintering process (200 °C). After the sintering process, the crystallite size is increased from 6.8 nm to 80.3 nm. The high ratio of surface atoms to inner atoms of nanoparticles reduces the melting point temperature, deciding the sintering process temperature. In order to investigate the resistance switching characteristics, metal/Ag{sub 2}S/metal structures are fabricated and tested. The effect of the electrode material on the non-volatile resistive memory characteristics is studied. The bottom electrochemically inert materials, such as Au and Pt, were critical for maintaining stable memory characteristics. By using Au and Pt inert bottom electrodes, we are able to significantly improve the memory endurance and retention to more than 10{sup 3} cycles and 10{sup 4} sec, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Resistive switching phenomena in TiO{sub x} nanoparticle layers for memory applications

Electrical characteristics of a Co/ TiO{sub x}/Co resistive memory device, fabricated by two different methods, are reported. In addition to crystalline TiO{sub 2} layers fabricated via conventional atomic layer deposition (ALD), an alternative method has been examined, where TiO{sub x} nanoparticle layers were fabricated via sol-gel. The different devices have shown different hysteresis loops with a unique crossing point for the sol-gel devices. A simple qualitative model is introduced to describe the different current-voltage behaviours by suggesting only one active metal-oxide interface for the ALD devices and two active metal-oxide interfaces for the sol-gel devices. Furthermore, we show that the resistive switching behaviour could be easily tuned by proper interface engineering and that despite having a similar active material, different fabrication methods can lead to dissimilar resistive switching properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hafnium carbide formation in oxygen deficient hafnium oxide thin films

On highly oxygen deficient thin films of hafnium oxide (hafnia, HfO{sub 2−x}) contaminated with adsorbates of carbon oxides, the formation of hafnium carbide (HfC{sub x}) at the surface during vacuum annealing at temperatures as low as 600 °C is reported. Using X-ray photoelectron spectroscopy the evolution of the HfC{sub x} surface layer related to a transformation from insulating into metallic state is monitored in situ. In contrast, for fully stoichiometric HfO{sub 2} thin films prepared and measured under identical conditions, the formation of HfC{sub x} was not detectable suggesting that the enhanced adsorption of carbon oxides on oxygen deficient films provides a carbon source for the carbide formation. This shows that a high concentration of oxygen vacancies in carbon contaminated hafnia lowers considerably the formation energy of hafnium carbide. Thus, the presence of a sufficient amount of residual carbon in resistive random access memory devices might lead to a similar carbide formation within the conducting filaments due to Joule heating.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale nuclei in phase change materials: Origin of different crystallization mechanisms of Ge{sub 2}Sb{sub 2}Te{sub 5} and AgInSbTe

Phase change memory devices are based on the rapid and reversible amorphous-to-crystalline transformations of phase change materials, such as Ge{sub 2}Sb{sub 2}Te{sub 5} and AgInSbTe. Since the maximum switching speed of these devices is typically limited by crystallization speed, understanding the crystallization process is of crucial importance. While Ge{sub 2}Sb{sub 2}Te{sub 5} and AgInSbTe show very different crystallization mechanisms from their melt-quenched states, the nanostructural origin of this difference has not been clearly demonstrated. Here, we show that an amorphous state includes different sizes and number of nanoscale nuclei, after thermal treatment such as melt-quenching or furnace annealing is performed. We employ fluctuation transmission electron microscopy to detect nanoscale nuclei embedded in amorphous materials, and use a pump-probe laser technique and atomic force microscopy to study the kinetics of nucleation and growth. We confirm that melt-quenched amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} includes considerably larger and more quenched-in nuclei than its as-deposited state, while melt-quenched AgInSbTe does not, and explain this contrast by the different ratio between quenching time and nucleation time in these materials. In addition to providing insights to the crystallization process in these technologically important devices, this study presents experimental illustrations of temperature-dependence of nucleation rate and growth speed, which was predicted by theory of phase transformation but rarely demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Off-resonant Raman quantum memory in impurity crystals: signal-to-noise ratio analysis

The possibility of implementing an off-resonant Raman scheme of optical quantum memory on the basis of an ensemble of three-level atoms is investigated under the condition of equal polarisations of resonant transitions forming the Λ-scheme. The developed model is used to analyse the signal-to-noise ratio at the output of an optical quantum memory device in {sup 143}Nd{sup 3+} : Y {sup 7}LiF{sub 4}. It is shown that this ratio can significantly exceed unity for single-photon input pulses. The required values of the parameters can be obtained by using an impurity crystal in the form of a whispering-gallery mode ring resonator. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved characteristics of amorphous indium-gallium-zinc-oxide-based resistive random access memory using hydrogen post-annealing

The authors report an improvement in resistive switching (RS) characteristics of amorphous indium-gallium-zinc-oxide (a-IGZO)-based resistive random access memory devices using hydrogen post-annealing. Because this a-IGZO thin film has oxygen off-stoichiometry in the form of deficient and excessive oxygen sites, the film properties can be improved by introducing hydrogen atoms through the annealing process. After hydrogen post-annealing, the device exhibited a stable bipolar RS, low-voltage set and reset operation, long retention (>10{sup 5 }s), good endurance (>10{sup 6} cycles), and a narrow distribution in each current state. The effect of hydrogen post-annealing is also investigated by analyzing the sample surface using X-ray photon spectroscopy and atomic force microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗