Search NASA⌕ Search

SEARCH · Search NASA

Results for “Meshkov”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Hot-spot mix in ignition-scale implosions on the NIF

Ignition of an inertial confinement fusion (ICF) target depends on the formation of a central hot spot with sufficient temperature and areal density. Radiative and conductive losses from the hot spot can be enhanced by hydrodynamic instabilities. The concentric spherical layers of current National Ignition Facility (NIF) ignition targets consist of a plastic ablator surrounding a thin shell of cryogenic thermonuclear fuel (i.e., hydrogen isotopes), with fuel vapor filling the interior volume [S. W. Haan et al., Phys. Plasmas 18, 051001 (2011)]. The Rev. 5 ablator is doped with Ge to minimize preheat of the ablator closest to the DT ice caused by Au M-band emission from the hohlraum x-ray drive [D. S. Clark et al., Phys. Plasmas 17, 052703 (2010)]. Richtmyer-Meshkov and Rayleigh-Taylor hydrodynamic instabilities seeded by high-mode () ablator-surface perturbations can cause Ge-doped ablator to mix into the interior of the shell at the end of the acceleration phase [B. A. Hammel et al., Phys. Plasmas 18, 056310 (2011)]. As the shell decelerates, it compresses the fuel vapor, forming a hot spot. K-shell line emission from the ionized Ge that has penetrated into the hot spot provides an experimental signature of hot-spot mix. The Ge emission from tritium-hydrogen-deuterium (THD) and deuterium-tritium (DT) cryogenic targets and gas-filled plastic-shell capsules, which replace the THD layer with a mass-equivalent CH layer, was examined. The inferred amount of hot-spot-mix mass, estimated from the Ge K-shell line brightness using a detailed atomic physics code [J. J. MacFarlane et al., High Energy Density Phys. 3, 181 (2006)], is typically below the 75-ng allowance for hot-spot mix [S. W. Haan et al., Phys. Plasmas 18, 051001 (2011)]. Predictions of a simple mix model, based on linear growth of the measured surface-mass modulations, are consistent with the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of mix on capsule yields as a function of shell thickness and gas fill

An investigation of direct drive capsules with different shell thicknesses and gas fills was conducted to examine the amount of shock induced (Richtmyer-Meshkov) mix versus Rayleigh-Taylor mix from deceleration of the implosion. The RAGE (Eulerian) code with a turbulent mix model was used to model these capsules for neutron yields along with time-dependent mix amounts. The amount of Richtmyer-Meshkov induced mix from the shock breaking out of the shell is about 0.1 μg (0.15 μm of shell material), while the Rayleigh-Taylor mix is of order 1 μg and determines the mixed simulation yield. The simulations were able to calculate a yield over mix (YOM) ratio (experiment/mix simulation) between 0.5 and 1.0 for capsules with shell thicknesses ranging from 7.5 to 20 μm and with gas fills between 3.8 and 20 atm of D{sub 2} or DT. The simulated burn averaged T{sub ion} values typically lie with 0.5 keV of the data, which is within the measurement error. For capsules with shell thicknesses >25 μm, the YOM values drop to 0.10 ± 0.05, suggesting that some unmodeled effect needs to be accounted for in the thickest capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in indirect and direct-drive planar experiments on hydrodynamic instabilities at the ablation front

Understanding and mitigating hydrodynamic instabilities and the fuel mix are the key elements for achieving ignition in Inertial Confinement Fusion. Cryogenic indirect-drive implosions on the National Ignition Facility have evidenced that the ablative Rayleigh-Taylor Instability (RTI) is a driver of the hot spot mix. This motivates the switch to a more flexible higher adiabat implosion design [O. A. Hurricane et al., Phys. Plasmas 21, 056313 (2014)]. The shell instability is also the main candidate for performance degradation in low-adiabat direct drive cryogenic implosions [Goncharov et al., Phys. Plasmas 21, 056315 (2014)]. This paper reviews recent results acquired in planar experiments performed on the OMEGA laser facility and devoted to the modeling and mitigation of hydrodynamic instabilities at the ablation front. In application to the indirect-drive scheme, we describe results obtained with a specific ablator composition such as the laminated ablator or a graded-dopant emulator. In application to the direct drive scheme, we discuss experiments devoted to the study of laser imprinted perturbations with special phase plates. The simulations of the Richtmyer-Meshkov phase reversal during the shock transit phase are challenging, and of crucial interest because this phase sets the seed of the RTI growth. Recent works were dedicated to increasing the accuracy of measurements of the phase inversion. We conclude by presenting a novel imprint mitigation mechanism based on the use of underdense foams. The foams induce laser smoothing by parametric instabilities thus reducing the laser imprint on the CH foil.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validating hydrodynamic growth in National Ignition Facility implosions

We present new hydrodynamic growth experiments at the National Ignition Facility, which extend previous measurements up to Legendre mode 160 and convergence ratio 4, continuing the growth factor dispersion curve comparison of the low foot and high foot pulses reported by Casey et al. [Phys. Rev. E 90, 011102(R) (2014)]. We show that the high foot pulse has lower growth factor and lower growth rate than the low foot pulse. Using novel on-capsule fiducial markers, we observe that mode 160 inverts sign (changes phase) for the high foot pulse, evidence of amplitude oscillations during the Richtmyer-Meshkov phase of a spherically convergent system. Post-shot simulations are consistent with the experimental measurements for all but the shortest wavelength perturbations, reinforcing the validity of radiation hydrodynamic simulations of ablation front growth in inertial confinement fusion capsules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stabilization of high-compression, indirect-drive inertial confinement fusion implosions using a 4-shock adiabat-shaped drive

Hydrodynamic instabilities and poor fuel compression are major factors for capsule performance degradation in ignition experiments on the National Ignition Facility. Using a recently developed laser drive profile with a decaying first shock to tune the ablative Richtmyer-Meshkov (ARM) instability and subsequent in-flight Rayleigh-Taylor growth, we have demonstrated reduced growth compared to the standard ignition pulse whilst maintaining conditions for a low fuel adiabat needed for increased compression. Using in-flight x-ray radiography of pre-machined modulations, the first growth measurements using this new ARM-tuned drive have demonstrated instability growth reduction of ∼4× compared to the original design at a convergence ratio of ∼2. Corresponding simulations give a fuel adiabat of ∼1.6, similar to the original goal and consistent with ignition requirements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Jet formation in cerium metal to examine material strength

Examining the evolution of material properties at extreme conditions advances our understanding of numerous high-pressure phenomena from natural events like meteorite impacts to general solid mechanics and fluid flow behavior. Recent advances in synchrotron diagnostics coupled with dynamic compression platforms have introduced new possibilities for examining in-situ, spatially resolved material response with nanosecond time resolution. In this work, we examined jet formation from a Richtmyer-Meshkov instability in cerium initially shocked into a transient, high-pressure phase, and then released to a low-pressure, higher-temperature state. Cerium's rich phase diagram allows us to study the yield stress following a shock induced solid-solid phase transition. X-ray imaging was used to obtain images of jet formation and evolution with 2–3 μm spatial resolution. From these images, an analytic method was used to estimate the post-shock yield stress, and these results were compared to continuum calculations that incorporated an experimentally validated equation-of-state (EOS) for cerium coupled with a deviatoric strength model. Reasonable agreement was observed between the calculations and the data illustrating the sensitivity of jet formation on the yield stress values. The data and analysis shown here provide insight into material strength during dynamic loading which is expected to aid in the development of strength aware multi-phase EOS required to predict the response of matter at extreme conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock-driven hydrodynamic instability of a sinusoidally perturbed, high-Atwood number, oblique interface

A shock incident on an interface will cause any initial perturbations on that interface to grow. When the shock front is parallel to the interface, the perturbations grow due to the Richtmyer-Meshkov (RM) process. When there is some tilt between the shock front and the interface, shear flow will result across the postshock interface. Recent experiments on the OMEGA EP laser have studied the hydrodynamic instability growth which results from a supported shock interacting with a sinusoidally perturbed, oblique interface. The observed instability growth was dominated by Richtmyer-Meshkov at early times but became Kelvin-Helmholtz (KH)-like at late times. Previously, this instability growth was described using an analytic model for the deposition of baroclinic vorticity on the interface by a shock combined with a discrete vortex model. Here, we utilize the same baroclinic vorticity deposition model in conjunction with a desingularized, periodic Birkhoff-Rott equation to model instability evolution. The Birkhoff-Rott equation takes into account the vorticity distribution along the interface, whereas the discrete vortex model assumed that all vorticity over each wavelength of the perturbation is confined to a point. We compare the new model to xRAGE simulations and experiments. In conclusion, the model is found to overpredict both the instability growth and shear across the interface by about a factor of two, but correctly predicts that the growth is RM-like at early times and KH-like at late times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock-driven three-fluid mixing with various chevron interface configurations

When a shock wave crosses a density interface, the Richtmyer–Meshkov instability causes perturbations to grow. Richtmyer–Meshkov instabilities arise from the deposition of vorticity from the misaligned density and pressure gradients at the shock front. In many engineering applications, microscopic surface roughness will grow into multi-mode perturbations, inducing mixing between the fluid on either side of an initial interface. Applications often have multiple interfaces, some of which are close enough to interact in the later stages of instability growth. In this study, we numerically investigate the mixing of a three-layer system with periodic zigzag (or chevron) interfaces, calculating the dependence of the width and mass of mixed material on properties such as the shock timing, chevron amplitude, multi-mode perturbation spectrum, density ratio, and shock mach number. The multi-mode case is also compared with a single-mode perturbation. The Flash hydrodynamic code is used to solve the Euler equations in three dimensions with adaptive grid refinement. Key results include a significant increase in mixed mass when changing from a single-mode to a multi-mode perturbation on one of the interfaces. The mixed width is mainly sensitive to the density ratio and chevron amplitude, whereas the mixed mass also depends on the multi-mode spectrum. In conclusion, steeper initial perturbation spectra have lower mixed mass at early times but a greater mixed mass after the reflected shock transits back across the layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of Initial Condition Spectral Content on Shock Driven-Turbulent Mixing

The mixing of materials due to the Richtmyer-Meshkov instability and the ensuing turbulent behavior is of intense interest in a variety of physical systems including inertial confinement fusion, combustion, and the final stages of stellar evolution. Extensive numerical and laboratory studies of shock-driven mixing have demonstrated the rich behavior associated with the onset of turbulence due to the shocks. Here we report on progress in understanding shock-driven mixing at interfaces between fluids of differing densities through three-dimensional (3D) numerical simulations using the RAGE code in the implicit large eddy simulation context. We consider a shock-tube configuration with a band of high density gas (SF 6 ) embedded in low density gas (air). Shocks with a Mach number of 1.26 are passed through SF 6 bands, resulting in transition to turbulence driven by the Richtmyer-Meshkov instability. The system is followed as a rarefaction wave and a reflected secondary shock from the back wall pass through the SF 6 band. We apply a variety of initial perturbations to the interfaces between the two fluids in which the physical standard deviation, wave number range, and the spectral slope of the perturbations are held constant, but the number of modes initially present is varied. By thus decreasing the density of initial spectral modes of the interface, we find that we can achieve as much as 25% less total mixing at late times. This has potential direct implications for the treatment of initial conditions applied to material interfaces in both 3D and reduced dimensionality simulation models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-length-scale turbulence model for self-similar buoyancy-, shock-, and shear-driven mixing

The three-equation k-L-a turbulence model [B. Morgan and M. Wickett, Three-equation model for the self-similar growth of Rayleigh-Taylor and Richtmyer-Meshkov instabilities," Phys. Rev. E 91 (2015)] is extended by the addition of a second length scale equation. It is shown that the separation of turbulence transport and turbulence destruction length scales is necessary for simultaneous prediction of the growth parameter and turbulence intensity of a Kelvin-Helmholtz shear layer when model coeficients are constrained by similarity analysis. Constraints on model coeficients are derived that satisfy an ansatz of self-similarity in the low-Atwood-number limit and allow the determination of model coeficients necessary to recover expected experimental behavior. The model is then applied in one-dimensional simulations of Rayleigh-Taylor, reshocked Richtmyer-Meshkov, Kelvin{Helmholtz, and combined Rayleigh-Taylor/Kelvin-Helmholtz instability mixing layers to demonstrate that the expected growth rates are recovered numerically. Finally, it is shown that model behavior in the case of combined instability is to predict a mixing width that is a linear combination of Rayleigh-Taylor and Kelvin-Helmholtz mixing processes.

42 ENGINEERING↗

Density variance dynamics in disparate shock tubes

This report discusses two experiments which investigate thin layer, heavy curtain fragmentation from the perspective of a Reynolds-Averaged mix model, in drastically disparate experimental regimes. The first, the centimeter/millisecond-scale “Horizontal Shock Tube” (HST) is a compressed-gas piston-driven shock tube experiment. The second, the “Multishock thin layer” (Mshock) experiment performed at the National Ignition Facility, is a micrometer/nanosecond-scale laser-driven shock tube experiment. Both are situations in which a heavy plane layer (a ‘curtain’) is initially suspended in a lighter medium. After being shocked from at least one side, the layer translates while its interfaces evolve due to the excitation of the Richtmyer-Meshkov instability at its surfaces. The evolution of density variance, which initially exists only on the surface of the layer, as it comes to encompass the whole layer interior is used as a description of layer fragmentation and dissolution. These experiments have each been simulated in the Los Alamos National Laboratory multi-physics code xRAGE, which includes fundamental hydrodynamics, extended plasma physics and radiation effects which are important to drive the high-energy density experiment, and the Besnard-Harlow-Rauenzahn (BHR) turbulence model. In each, the principal diagnostic for comparison is an experimental metric for the density (co)variance, b, which tracks the moments of the density field at the curtain interfaces and body. Due to experimental constraints in different regimes (i.e. optical diagnostics can be deployed on conventional shock tubes, while the plasma shock tubes must be imaged by x-rays; interfaces can be imposed to specification on laser-driven experiments, which are stored in the solid phase, while conventional experiments have imperfect control of the flow fields which separate the layer, etc.) the experiments are not designed to be perfect scaled cognates of one another. However, despite the separation of six orders of magnitude of scaling in time, and four in space, we are able to demonstrate that the same turbulence model, operating in the same fashion in the same computer code, is able to reproduce results in each experiment, by tracking evolution due to common relevant physics. Additionally, we will present preliminary work toward density variance comparisons in a single-interface Richtmyer-Meshkov configuration, the conventional fluid “Vertical Shock Tube” (VST) experiment, and the Modal Initial Conditions (ModCons) campaign fielded at the OMEGA-EP laser facility.

42 ENGINEERING↗

Large-eddy and unsteady RANS simulations of a shock-accelerated heavy gas cylinder

Two-dimensional numerical simulations of the Richtmyer–Meshkov unstable “shock-jet” problem are conducted using both large-eddy simulation (LES) and unsteady Reynolds-averaged Navier–Stokes (URANS) approaches in an arbitrary Lagrangian–Eulerian hydrodynamics code. Turbulence statistics are extracted from LES by running an ensemble of simulations with multimode perturbations to the initial conditions. Detailed grid convergence studies are conducted, and LES results are found to agree well with both experiment and high-order simulations conducted by Shankar et al. (Phys Fluids 23, 024102, 2011). URANS results using a k–L approach are found to be highly sensitive to initialization of the turbulence lengthscale L and to the time at which L becomes resolved on the computational mesh. As a result, it is observed that a gradient diffusion closure for turbulent species flux is a poor approximation at early times, and a new closure based on the mass-flux velocity is proposed for low-Reynolds-number mixing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic Strength and Equation of State of Epon 828 and Diethanolamine (DEA) Polymer Epoxy Under Shock Loading

Polymers are increasingly utilized in engineering applications that can experience high loading rates, necessitating increased understanding of their response under such conditions. The tamped Richtmyer-Meshkov Instability (RMI) method was used to characterize the equation of state and dynamic strength of the polymer Epon 828 cured with Diethanolamine (DEA). Plate impact experiments that drove a uniaxial shock compression wave across a sinusoidally corrugated metal-polymer interface were performed to generate shock stresses from 4-12 GPa and strain rates of approximately 1/s in the polymer. X-ray phase contrast imaging recorded the shock motion in the polymer and subsequent interface evolution. Analysis of this data yielded the polymer equation of state and, in conjunction with numerical modeling, the dynamic strength. The equation of state was validated against one-dimensional plate impact experiments from existing literature. The dynamic strength was compared to prior data for Epon 828 and related polymers at lower strain rates and found to exhibit significant strain rate and pressure-hardening effects. The strength of the Epon 828 polymer at 10 6 1/s was found to be approximately 1.5 GPa, suggesting that it is comparable to the strength of high strength metals at these dynamic conditions.

Equation of state↗

Experimental platforms for investigating feature-driven jets for HED mix model validation

High-energy-density (HED) systems, such as inertial confinement fusion (ICF), are susceptible to hydrodynamic instabilities that can significantly affect both experimental results and modeling predictions. Isolated features, such as fill tubes or divots in the capsule, can cause material to jet as a result of the compressive shock exciting the Richtmyer–Meshkov instability, and serve as one of the primary degradation mechanisms in ICF yield. Simulations of feature-driven jets and how they mix require extensive experimental validation, particularly for understanding to what degree the initial size and shape of a feature influence jet dynamics, and how much instability feeds through downstream layers. A better understanding of feature-driven jetting can improve our mix modeling capabilities and increase hydrodynamic simulation accuracy. This manuscript describes a series of experimental platforms fielded by Los Alamos National Laboratory as a part of the Mshock Omega 60 and ModCons Omega EP campaigns to explore feature-driven jetting. These platforms are designed to benchmark jet evolution and growth as a function of initial feature size and shape, investigate jet-layer interactions leading to instability feedthrough, and will be used to characterize jet-jet interactions resulting from clusters of features. In conclusion, preliminary results for both platforms are shown. The ModCons experiments are on-going, and a discussion of future work directions is included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strength of tantalum shocked at ultrahigh pressures

High purity polycrystalline tantalum (Ta) was shocked through 1–3.5 Mbar pressures creating Richtmyer-Meshkov unstable interfaces that were used to determine the dynamic material strength. The experiments were performed on the Omega laser at the University of Rochester Laboratory for Laser Energetics. Prior to shock, the driven surfaces of the tantalum targets where coined with a sinusoidal pattern. The targets were recovered post-shock, and the growth of the sinusoid amplitudes was used to characterize the relative extent of plastic deformation as a function of laser energy. Additionally, analogous data were extracted prior to the experiments from phenomenological Von Mises plasticity simulations that considered equation of state tables for Ta. The simulations showed the best agreement with the experiments (less than 5% difference between mean ripple growth measures) for shock pressures ranging from 1.2 to 2.7 Mbar. A fluid model studied as a function of viscosity was also used to qualitatively indicate the sensitivity of the experiments to strength. These results verify the ability to use a phenomenological, equation of state based model to simulate very high-strain rate, high-pressure deformation of tantalum.

36 MATERIALS SCIENCE↗

A passive model for the evolution of subgrid-scale instabilities in turbulent flow regimes

In this work, a zero-dimensional model for the development of turbulent mixing layers driven by Rayleigh–Taylor (RT) or Richtmyer–Meshkov (RM) instabilities is presented, for application in Reynolds-Averaged Navier–Stokes (RANS) simulations. The model approximates the behavior of the turbulent mixing layer at a passively advected tracer particle that sits on the material interface of interest in the simulation, and is used to provide initial conditions for the RANS model once the mixing layer width has developed to a size that may be resolved on the computational mesh. The model relies on approximations to the Besnard–Harlow–Rauenzahn (BHR) RANS closure equations and is thus consistent the turbulent development of the mixing layer, unlike previous models of this type which have focused on the early-time laminar development of RT or RM instabilities. These instabilities will often grow through an initially laminar state before developing into turbulence, and criteria for switching from an existing laminar model to the proposed turbulent model are considered. The proposed model reproduces the mixing layer development of RT and RM instabilities seen in mixed width resolving BHR RANS simulations to a reasonable degree of accuracy, and relaxes the need for the RANS simulation to resolve the mixed width as soon as the mixing layer becomes turbulent, which may be impractical in cases where the mixing layer grows through a wide range of scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mixing transition in a shocked variable-density flow

We measure two-dimensional velocity and density fluctuations in a shock-driven heavy gas curtain for three different incident Mach numbers (M = 1.21, 1.36, and 1.50) and a fixed initial perturbation. We study the time evolution of the velocity and density fields and observe two different mixing transitions in this unsteady flow. The first transition is caused by small-scale mixing in vortex cores, while the second transition is related to increased homogenization across the mixing layer and a drive towards isotropy. By measuring the anisotropy of the velocity fluctuations and the evolution of the turbulent kinetic energy, we are able to assess the anisotropy of the flow. For the first time in Richtmyer-Meshkov (RM) flows, we measure and compare turbulent length scales derived from both the density and velocity field measurements, and we find ratios of Liepmann-Taylor to inner-viscous scales (λ L /λ v ) that are inconsistent with those found using Reynolds number scaling based on circulation, Re Γ , or based on turbulent kinetic energy, Re K . At late times, Re K better reflects the decay of the mixing field than Reynolds numbers that are based upon mixing width or circulation. We also estimate the time evolution of dissipation and Kolmogorov scales for the first time in RM flows. When we estimate the Taylor microscale (λ T ) for our experiments using both density and velocity, the density microscale agrees well with with the relationship λ T = √10δRe- 1/2 where Re = ReK and δ is the mixing layer width, but the velocity-based Taylor microscale follows a new scaling of λ T = 10δRe -1/2 .

42 ENGINEERING↗

Computational study of the shock driven instability of a multiphase particle-gas system

This paper considers the interaction of a shock wave with a multiphase particle-gas system which creates an instability somewhat similar to the Richtmyer-Meshkov instability but with a larger parameter space. Because this parameter space is large, we only present an introductory survey of the effects of many of these parameters. We highlight the effects of particle-gas coupling, incident shock strength, particle size, effective system density differences, and multiple particle relaxation time effects. We focus on dilute flows with mass loading up to 40% and do not attempt to cover all parametric combinations. Instead, we vary one parameter at a time leaving additional parametric combinations for future work. In this work, the simulations are run with the Ares code, developed at Lawrence Livermore National Laboratory, which uses a multiphase particulate transport method to model two-way momentum and energy coupling. A brief validation of these models is presented and coupling effects are explored. It is shown that even for small particles, on the order of 1μm, multi-phase coupling effects are important and diminish the circulation deposition on the interface by up to 25%. These coupling effects are shown to create large temperature deviations from the dusty gas approximation, up to 20% greater, especially at higher shock strengths. It is also found that for a multiphase instability, the vortex sheet deposited at the interface separates into two sheets. In conclusion, depending on the particle and particle-gas Atwood numbers, the instability may be suppressed or enhanced by the interactions of these two vortex sheets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗