Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modeling & Simulation (M&S)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

A Climate Generator for Agricultural Planning in Southeastern South America

A method is described for the generation of climate scenarios in a form suitable for driving agricultural models. The scenarios are tailored to the region in southeastern South America bounded by 25-40 deg S, 45-65 deg W, denoted here as SESA. SESA has been characterized by increasing summer precipitation, particularly during the late 20th century, which, in the context of favorable market conditions, has enabled increases in agricultural production. Since about year 2000, however, the upward tendency appears to have slowed or possibly stopped, raising questions about future climate inputs to regional agricultural yields. The method is not predictive in the deterministic sense, but rather attempts to characterize uncertainty in near-term future climate, taking into account both forced trends and unforced, natural climate fluctuations. It differs from typical downscaling methods in that GCM information is utilized only at the regional scale, subregional variability being modeled based on the observational record. Output, generated on the monthly time scale, is disaggregated to daily values with a weather generator and used to drive soybean yields in the crop model DSSAT-CSM, for which preliminary results are discussed. The simulations produced permit assessment of the interplay between long-range trends and near-term climate variability in terms of agricultural production.

climate simulation↗
NASA NTRS2011

Evaluation of Arctic Sea Ice Thickness Simulated by AOMIP Models

We compare results from six AOMIP model simulations with estimates of sea ice thickness obtained from ICESat, moored and submarine-based upward looking sensors, airborne electromagnetic measurements and drill holes. Our goal is to find patterns of model performance to guide model improvement. The satellite data is pan-arctic from 2004-2008, ice-draft data is from moored instruments in Fram Strait, the Greenland Sea and the Beaufort Sea from 1992-2008 and from submarines from 1975-2000. The drill hole data are from the Laptev and East Siberian marginal seas from 1982-1986 and from coastal stations from 1998-2009. While there are important caveats when comparing modeled results with measurements from different platforms and time periods such as these, the models agree well with moored ULS data. In general, the AOMIP models underestimate the thickness of measured ice thicker than about 2 m and overestimate thickness of ice thinner than 2 m. The simulated results are poor over the fast ice and marginal seas of the Siberian shelves. Averaging over all observational data sets, the better correlations and smaller differences from observed thickness are from the ECCO2 and UW models.

Johnson, Mark↗
NASA NTRS2013

Radiative Forcing of the Direct Aerosol Effect from AeroCom Phase II Simulations

We report on the AeroCom Phase II direct aerosol effect (DAE) experiment where 16 detailed global aerosol models have been used to simulate the changes in the aerosol distribution over the industrial era. All 16 models have estimated the radiative forcing (RF) of the anthropogenic DAE, and have taken into account anthropogenic sulphate, black carbon (BC) and organic aerosols (OA) from fossil fuel, biofuel, and biomass burning emissions. In addition several models have simulated the DAE of anthropogenic nitrate and anthropogenic influenced secondary organic aerosols (SOA). The model simulated all-sky RF of the DAE from total anthropogenic aerosols has a range from −0.58 to −0.02 W m(sup−2), with a mean of −0.27 W m(sup−2 for the 16 models. Several models did not include nitrate or SOA and modifying the estimate by accounting for this with information slightly strengthens the mean. Modifying the model estimates for missing aerosol components and for the time period 1750 to 2010 results in a mean RF for the DAE of −0.35 W m(sup−2). Compared to AeroCom Phase I (Schulz et al., 2006) we find very similar spreads in both total DAE and aerosol component RF. However, the RF of the total DAE is stronger negative and RF from BC from fossil fuel and biofuel emissions are stronger positive in the present study than in the previous AeroCom study.We find a tendency for models having a strong (positive) BC RF to also have strong (negative) sulphate or OA RF. This relationship leads to smaller uncertainty in the total RF of the DAE compared to the RF of the sum of the individual aerosol components. The spread in results for the individual aerosol components is substantial, and can be divided into diversities in burden, mass extinction coefficient (MEC), and normalized RF with respect to AOD. We find that these three factors give similar contributions to the spread in results

Computer simulation↗
NASA NTRS1976

Aerodynamic and acoustic tests of duct-burning turbofan exhaust nozzles

The static aerodynamic and acoustic characteristics of duct-burning turbofan (DBTF) exhaust nozzles are established. Scale models, having a total area equivalent to a 0.127 m diameter convergent nozzle, simulating unsuppressed coannular nozzles and mechanically suppressed nozzles with and without ejectors (hardwall and acoustically treated) were tested in a quiescent environment. The ratio of fan to primary area was varied from 0.75 to 1.2. Far field acoustic data, perceived noise levels, and thrust measurements were obtained for 417 test conditions. Pressure ratios were varied from 1.3 to 4.1 in the fan stream and from 1.53 to 2.5 in the primary stream. Total temperature varied from 395 to 1090 K in both streams. Jet noise reductions relative to synthesized prediction from 8 PNdB (with the unsuppressed coannular nozzle) to 15 PNdB (with a mechanically suppressed configuration) were observed at conditions typical of engines being considered under the Advanced Supersonic Technology program. The inherent suppression characteristic of the unsuppressed coannular nozzle is related to the rapid mixing in the jet wake caused by the velocity profiles associated with the DBTF. Since this can be achieved without a mechanical suppressor, significant reductions in aircraft weight or noise footprint can be realized.

Kozlowski, H.↗
NASA NTRS1979

Description and preliminary results of the 9-level UCLA general circulation model

The 9-level general circulation model, with the upper boundary of 50 mb, is a modification of the earlier 6- and 12-level versions used at UCLA. Two major design changes have been made in an effort to improve the model: (1) a potential enstrophy conserving scheme in the equation of motion has replaced the previous scheme which only conserved enstrophy for nondivergent flow, and (2) the treatment of the planetary boundary layer has been modified by making the predicted planetary boundary layer top a coordinate surface. Experiments with idealized steep mountains have been made to test each of the major modifications, and the model is now ready for general circulation simulation experiments.

Suarez, M. J.↗
NASA NTRS1981

Applications of estimation theory to numerical weather prediction

Numerical weather prediction (NWP) is an initial value problem for a system of nonlinear partial differential equations in which the initial values are known only incompletely and inaccurately. Data at initial time can be supplemented, however, by observations of the system distributed over a time interval preceding it. Estimation theory was successful in approaching such problems for models governed by systems of ordinary differential equations and of linear PDEs. Estimation-theoretic methods for NWP are developed. A model exhibiting many features of large scale atmospheric flow important in NWP is the one governed by the shallow fluid equations. The estimation problem for a linearized formulation of these equations is studied. A finite difference version of the equations is used as a forecast model to simulate the numerical models used in NWP.

Cohn, S.↗
NASA NTRS1988

Design of a nonsingular Level 2.5 second-order closure model for the prediction of atmospheric turbulence

The suitability of applying the Mellor and Yamada (1974, 1982) Level 2.5 second-order turbulence closure model to general circulation models is investigated by examining not only the scheme's simulation of fully (or nearly fully) developed turbulence, but also its simulation of rapidly growing or strongly decaying turbulence. The behavior of the model is presented over its entire domain of definition, with special consideration given to the pathologies of the model. The model is then modified for the case of growing turbulence to rectify some of its physical shortcomings for that case, and to remove the pathologies that prohibit its use in a general circulation model. The performance of the modified Level 2.5 model is compared to the performance of various other modified versions through the numerical simulation for a growing convective PBL. The results show that the modified Level 2.5 model is a viable candidate for the prediction of turbulence and the simulation of the PBL in general circulation models.

Helfand, H. M.↗
NASA NTRS1991

Orbit transfer rocket engine technology program: Automated preflight methods concept definition

The possibility of automating preflight engine checkouts on orbit transfer engines is discussed. The minimum requirements in terms of information and processing necessary to assess the engine'e integrity and readiness to perform its mission were first defined. A variety of ways for remotely obtaining that information were generated. The sophistication of these approaches varied from a simple preliminary power up, where the engine is fired up for the first time, to the most advanced approach where the sensor and operational history data system alone indicates engine integrity. The critical issues and benefits of these methods were identified, outlined, and prioritized. The technology readiness of each of these automated preflight methods were then rated on a NASA Office of Exploration scale used for comparing technology options for future mission choices. Finally, estimates were made of the remaining cost to advance the technology for each method to a level where the system validation models have been demonstrated in a simulated environment.

Erickson, C. M.↗
NASA NTRS1993

Computational analysis of Variable Thrust Engine (VTE) performance

The Variable Thrust Engine (VTE) of the Orbital Maneuvering Vehicle (OMV) uses a hypergolic propellant combination of Monomethyl Hydrazine (MMH) and Nitrogen Tetroxide (NTO) as fuel and oxidizer, respectively. The performance of the VTE depends on a number of complex interacting phenomena such as atomization, spray dynamics, vaporization, turbulent mixing, convective/radiative heat transfer, and hypergolic combustion. This study involved the development of a comprehensive numerical methodology to facilitate detailed analysis of the VTE. An existing Computational Fluid Dynamics (CFD) code was extensively modified to include the following models: a two-liquid, two-phase Eulerian-Lagrangian spray model; a chemical equilibrium model; and a discrete ordinate radiation heat transfer model. The modified code was used to conduct a series of simulations to assess the effects of various physical phenomena and boundary conditions on the VTE performance. The details of the models and the results of the simulations are presented.

Giridharan, M. G.↗
NASA NTRS1993

Seasonal variation of surface and atmospheric cloud radiative forcing over the globe derived from satellite data

Global distributions of surface and atmospheric cloud radiative forcing parameters have been derived using parameterized radiation models with satellite meteorological data from the International Satellite Cloud Climatology Project, and directly measured top-of-atmosphere radiative fluxes from the Earth Radiation Budget Experiment. Specifically, shortwave, longwave, and total cloud forcing at the surface, and column-averaged values of longwave cloud forcing of the atmosphere were derived for the midseasonal months of April, July, and October 1985 and January 1986, covering a complete annual cycle. Seasonal variability is illustrated by comparing the results for July 1985 and January 1986, which represent the seasonal extremes. Surface shortwave cloud forcing is always negative, representing a cooling of the surface, with strongest cooling (-120 to -180 W/sq m) occurring over midlatitude storm tracks of the summer hemisphere. Surface longwave cloud forcing is always positive, representing a warming of the surface, with strongest warming (60 to 75 W/sq m) occurring over storm tracks of the winter hemisphere. Zonal averages show the entire summer hemisphere dominated by shortwave cooling, the middle and high latitudes of the winter hemisphere dominated by longwave warming, and a broad zone of transition in between. The globally averaged total cloud forcing amounts to a cooling throughout the year, ranging from a low of about -12 W/sq m for July 1985 to a high of about -25 W/sq m for January 1986. The longwave cloud forcing of the atmosphere shows a strong warming over deep convective regions in the tropics and a moderate cooling outside the tropics, amounting to a weak cooling (-2 to -5 W/sq m) in the global average. Comparisons of the results with general circulation model simulations show broad qualitative agreement regarding the locations of prominent warming and cooling regions. Quantitative comparisons, on the other hand, show significant differences between the magnitudes of warming and cooling in these regions. Most of the larger differences can be attributed to known deficiences of the general circulation model simulations. Comparisons with satellite-derived results of other investigators show much better agreement.

Gupta, Shashi K.↗
NASA NTRS2013

Evaluation of GEOS-5 Sulfur Dioxide Simulations During the Frostburg, MD 2010 Field Campaign.

Sulfur dioxide (SO2) is a major atmospheric pollutant with a strong anthropogenic component mostly produced by the combustion of fossil fuel and other industrial activities. As a precursor of sulfate aerosols that affect climate, air quality, and human health, this gas needs to be monitored on a global scale. Global climate and chemistry models including aerosol processes along with their radiative effects are important tools for climate and air quality research. Validation of these models against in-situ and satellite measurements is essential to ascertain the credibility of these models and to guide model improvements. In this study the Goddard Chemistry, Aerosol, Radiation, and Transport (GOCART) module running on-line inside the Goddard Earth Observing System version 5 (GEOS-5) model is used to simulate aerosol and SO2 concentrations. Data taken in November 2010 over Frostburg, Maryland during an SO2 field campaign involving ground instrumentation and aircraft are used to evaluate GEOS-5 simulated SO2 concentrations. Preliminary data analysis indicated the model overestimated surface SO2 concentration, which motivated the examination of mixing processes in the model and the specification of SO2 anthropogenic emission rates. As a result of this analysis, a revision of anthropogenic emission inventories in GEOS-5 was implemented, and the vertical placement of SO2 sources was updated. Results show that these revisions improve the model agreement with observations locally and in regions outside the area of this field campaign. In particular, we use the ground-based measurements collected by the United States Environmental Protection Agency (US EPA) for the year 2010 to evaluate the revised model simulations over North America.

Air Quality Campaign↗
NASA NTRSDate not supplied

Program Overview: Vortex Interaction Aerodynamics Relevant to Military Air Vehicle Performance

A research program has been underway for five years to study vortex interaction aerodynamics that are relevant to military air vehicle performance. The program has been conducted under the auspices of the NATO Science and Technology Organization (STO), Applied Vehicle Technology (AVT) panel by a Task Group with the identification of AVT-316. Seven special sessions have been established to highlight accomplishments from the AVT-316 research. An overview of the AVT-316 program is presented in this paper.

Verification and Validation↗
NASA NTRS2014

Titan's Plasma Environment : 3D Hybrid Kinetic Modeling of the TA Flyby and Comparison with CAPS-ELS and RPWS LP Observations

In this report we discuss the global plasma environment of the TA flyby from the perspective of 3D hybrid modeling. In our model the background, pickup, and ionospheric ions are considered as particles, whereas the electrons are described as a fluid. In homogeneous photoionization, electron-impact ionization and charge exchange are included in our model. We also take into account the collisions between the ions and neutrals. Our modeling shows that mass loading of the background plasma (H(+), O(+)) by pick up ions H2(+), CH4(+) and N2(+) differs from theT9 encounter simulations when O(+) ions are not introduced into the background plasma. In our hybrid-modeling we use Chamberlain profiles for the atmospheric components. We also include a simple ionosphere model with average mass M=28 amu ions that were generated inside the ionosphere. Titan's interior is considered as a weakly conducting body. Special attention has been paid to comparing the simulated pickup ion density distribution with CAPS-ELS and with RPWS LP observations by the Cassini-Huygens spacecraft along theta trajectory. Our modeling shows an asymmetry of the ion density distribution and the magnetic field, including the formation of Alfven wing-like structures.

induced magnetospheres↗