Search NASA⌕ Search

SEARCH · Search NASA

Results for “Models, Statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

A Performance Comparison of Low-Cost Near-Infrared (NIR) Spectrometers to a Conventional Laboratory Spectrometer for Rapid Biomass Compositional Analysis

The performance of a conventional laboratory near-infrared (NIR) spectrometer and two NIR spectrometer prototypes (a Texas Instruments NIRSCAN Nano evaluation model (EVM) and an InnoSpectra NIR-M-R2 spectrometer) are compared by collecting reflectance spectra of 270 well-characterized herbaceous biomass samples, building calibration models using the partial least squares (PLS-2) algorithm to predict five constituents of the samples from the reflectance spectra, and comparing the resulting model statistics. The prediction models developed using spectra from the Foss XDS spectrometer were slightly better than the prediction models developed using spectra from either the TI NIRSCAN Nano EVM and the InnoSpectra NIR-M-R2 as measured by the root mean square error (RMSECV) and the correlation coefficient (R 2 _cv) for “leave-one-out” cross-validation (CV). The models built from the two prototype units were not statistically significantly different from each other (p = 0.05). The Foss spectrometer has a larger wavelength range (400–2500 nm) compared with the two prototypes (900–1700 nm). When the spectra from the Foss XDS spectrometer were truncated so their wavelength range matched the wavelength range of the two prototype units, the resulting model was not statistically significantly different from the models from either prototype.

47 OTHER INSTRUMENTATION↗

Unusual feature of {alpha} spectra in the {sup 12}C+{sup 93}Nb reaction near Coulomb barrier energies

Proton and {alpha}-particle spectra have been measured at backward angles in the {sup 12}C + {sup 93}Nb reaction at E({sup 12}C)=37.5-60 MeV and in the {sup 16}O+{sup 93}Nb reaction at E({sup 16}O)=54-75 MeV. The inclusive particle spectra generally are in good agreement with the statistical model calculations except for the {alpha} spectra in the {sup 12}C-induced reaction at beam energies of 37.5-42.5 MeV which are close to the Coulomb barrier in the entrance channel. In these cases the evaporation peak is up to 2 MeV lower than its expected position from the statistical model predictions. Gamma-multiplicity-gated {alpha} spectra, measured in the same reaction, also show the aforementioned discrepancy. These observations reveal that the conventional statistical model cannot explain the {alpha}-particle spectra in the {sup 12}C-induced reactions near the Coulomb barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Cross Section Calculation Using TALYS Based on Two Different Level Density Models

Fission cross sections in statistical model of fission are calculated using one of important parameter such as transmission coefficients. This parameter calculated using optical model parameter and level density. There are several models of level density that can be used to predict fission cross section. They are Constant Temperature Model, Fermi Gas Model, Back-Shifted Fermi Gas Model, and Generalized Superfluid Model. In this work, fission cross section would be calculated using two different model of level density, such as Constant Temperature Model Plus Fermi Gas and Generalized Superfluid Model on Th-232 (n,f) fission reaction. Calculation result from two different model then would be compared with experimental data from ENDF B/VI. Analysis of result would lead to the conclusion of spesific characteristic for each model in every fission cases. This work has became a preliminary study to calculate fission cross section using different set of level density models. Further work will be implemented to calculate similar fission cross section using level density parameter that approximated by Thermal wavelength [see 21].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Data Science Meets Physical Organic Chemistry

At the heart of synthetic chemistry is the holy grail of predictable catalyst design. In particular, researchers involved in reaction development in asymmetric catalysis have pursued a variety of strategies toward this goal. This is driven by both the pragmatic need to achieve high selectivities and the inability to readily identify why a certain catalyst is effective for a given reaction. While empiricism and intuition have dominated the field of asymmetric catalysis since its inception, enantioselectivity offers a mechanistically rich platform to interrogate catalyst-structure response patterns that explain the performance of a particular catalyst or substrate. In the early stages of an asymmetric reaction development campaign, the overarching mechanism of the reaction, catalyst speciation, the turnover limiting step, and many other details are unknown or posited based on related reactions. Considering the unclear details leading to a successful reaction, initial enantioselectivity data are often used to intuitively guide the ultimate direction of optimization. However, if the conditions of the Curtin-Hammett principle are satisfied, then measured enantioselectivity can be directly connected to the ensemble of diastereomeric transition states (TSs) that lead to the enantiomeric products, and the associated free energy difference between competing TSs (ΔΔ G ‡ = - RT ln[( S )/( R )], where ( S ) and ( R ) represent the concentrations of the enantiomeric products). We, and others, speculated that this important piece of information can be leveraged to guide reaction optimization in a quantitative way. Although traditional linear free energy relationships (LFERs), such as Hammett plots, have been used to illuminate important mechanistic features, we sought to develop data science derived tools to expand the power of LFERs in order to describe complex reactions frequently encountered in modern asymmetric catalysis. Specifically, we investigated whether enantioselectivity data from a reaction can be quantitatively connected to the attributes of reaction components, such as catalyst and substrate structural features, to harness data for asymmetric catalyst design. In this context, we developed a workflow to relate computationally derived features of reaction components to enantioselectivity using data science tools. The mathematical representation of molecules can incorporate many aspects of a transformation, such as molecular features from substrate, product, catalyst, and proposed transition states. Statistical models relating these features to reaction outputs can be used for various tasks, such as performance prediction of untested molecules. Perhaps most importantly, statistical models can guide the generation of mechanistic hypotheses that are embedded within complex patterns of reaction responses. Overall, merging traditional physical organic experiments with statistical modeling techniques creates a feedback loop that enables both evaluation of multiple mechanistic hypotheses and future catalyst design. In this Account, we highlight the evolution and application of this approach in the context of a collaborative program based on chiral phosphoric acid catalysts (CPAs) in asymmetric catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the dosimetry of organ-at-risk in head and neck IMRT planning: An intertechnique and interinstitutional study

Purpose: To build a statistical model to quantitatively correlate the anatomic features of structures and the corresponding dose-volume histogram (DVH) of head and neck (HN) Tomotherapy (Tomo) plans. To study if the model built upon one intensity modulated radiation therapy (IMRT) technique (such as conventional Linac) can be used to predict anticipated organs-at-risk (OAR) DVH of patients treated with a different IMRT technique (such as Tomo). To study if the model built upon the clinical experience of one institution can be used to aid IMRT planning for another institution. Methods: Forty-four Tomotherapy intensity modulate radiotherapy plans of HN cases (Tomo-IMRT) from Institution A were included in the study. A different patient group of 53 HN fixed gantry IMRT (FG-IMRT) plans was selected from Institution B. The analyzed OARs included the parotid, larynx, spinal cord, brainstem, and submandibular gland. Two major groups of anatomical features were considered: the volumetric information and the spatial information. The volume information includes the volume of target, OAR, and overlapped volume between target and OAR. The spatial information of OARs relative to PTVs was represented by the distance-to-target histogram (DTH). Important anatomical and dosimetric features were extracted from DTH and DVH by principal component analysis. Two regression models, one for Tomotherapy plan and one for IMRT plan, were built independently. The accuracy of intratreatment-modality model prediction was validated by a leave one out cross-validation method. The intertechnique and interinstitution validations were performed by using the FG-IMRT model to predict the OAR dosimetry of Tomo-IMRT plans. The dosimetry of OARs, under the same and different institutional preferences, was analyzed to examine the correlation between the model prediction and planning protocol. Results: Significant patient anatomical factors contributing to OAR dose sparing in HN Tomotherapy plans have been analyzed and identified. For all the OARs, the discrepancies of dose indices between the model predicted values and the actual plan values were within 2.1%. Similar results were obtained from the modeling of FG-IMRT plans. The parotid gland was spared in a comparable fashion during the treatment planning of two institutions. The model based on FG-IMRT plans was found to predict the median dose of the parotid of Tomotherapy plans quite well, with a mean error of 2.6%. Predictions from the FG-IMRT model suggested the median dose of the larynx, median dose of the brainstem and D2 of the brainstem could be reduced by 10.5%, 12.8%, and 20.4%, respectively, in the Tomo-IMRT plans. This was found to be correlated to the institutional differences in OAR constraint settings. Re-planning of six Tomotherapy patients confirmed the potential of optimization improvement predicted by the FG-IMRT model was correct. Conclusions: The authors established a mathematical model to correlate the anatomical features and dosimetric indexes of OARs of HN patients in Tomotherapy plans. The model can be used for the setup of patient-specific OAR dose sparing goals and quality control of planning results. The institutional clinical experience was incorporated into the model which allows the model from one institution to generate a reference plan for another institution, or another IMRT technique.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Measurement of neutron multiplicity from fission of {sup 228}U and nuclear dissipation

Pre- and post-scission neutron multiplicities are measured at different excitation energies of the compound nucleus {sup 228}U populated using the {sup 19}F+{sup 209}Bi reaction. The measured yield of pre-scission and total neutrons are compared with the statistical model calculation for the decay of a compound nucleus. The statistical model calculations are performed using the Bohr-Wheeler transition state fission width as well as the dissipative dynamical fission width due to Kramers. Comparison between the measured and the calculated values shows that, while the Bohr-Wheeler fission width grossly underestimates the pre-scission neutron yield, a large amount of dissipation is required in the Kramers width to fit the experimental pre-scission multiplicities. Various factors contributing to the large excitation energy dependence of the fitted values of the dissipation coefficient are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Statistical mechanical model of gas adsorption in porous crystals with dynamic moieties

Some nanoporous, crystalline materials possess dynamic constituents, for example, rotatable moieties. These moieties can undergo a conformation change in response to the adsorption of guest molecules, which qualitatively impacts adsorption behavior. Here, we pose and solve a statistical mechanical model of gas adsorption in a porous crystal whose cages share a common ligand that can adopt two distinct rotational conformations. Guest molecules incentivize the ligands to adopt a different rotational configuration than maintained in the empty host. Our model captures inflections, steps, and hysteresis that can arise in the adsorption isotherm as a signature of the rotating ligands. The insights disclosed by our simple model contribute a more intimate understanding of the response and consequence of rotating ligands integrated into porous materials to harness them for gas storage and separations, chemical sensing, drug delivery, catalysis, and nanoscale devices. Particularly, our model reveals design strategies to exploit these moving constituents and engineer improved adsorbents with intrinsic thermal management for pressure-swing adsorption processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extinction Dynamics of the Foot-and-Mouth Disease Virus Carrier State Under Natural Conditions

Foot-and-mouth disease (FMD) is one of the most economically important livestock diseases worldwide. Following the clinical phase of FMD, a large proportion of ruminants remain persistently infected for extended periods. Although extinction of this carrier state occurs continuously at the animal and population levels, studies vary widely in their estimates of the duration of persistent infection. There is a need for robust statistical models to capture the dynamics of persistent infection for the sake of guiding FMD control and trade policies. The goal of the current study was to develop and assess statistical models to describe the extinction of FMD virus (FMDV) persistent infection using data from primary longitudinal studies of naturally infected cattle and Asian buffalo in Vietnam and India. Specifically, accelerated failure time (AFT) models and generalized linear mixed models (GLMM) were developed to predict the probability of persistent infection in seropositive animals and identified carriers at the individual animal level at sequential time points after outbreaks. The primary studies were analyzed by country and combined using an individual-participant data meta-analysis approach. The models estimated similar trends in the duration of persistent infection for the study/species groups included in the analyses, however the significance of the trends differed between the models. The overall probabilities of persistent infection were similar as predicted by the AFT and GLMM models: 6 months: 99% (AFT) /80% (GLMM), 12 months: 51% (AFT) /32% (GLMM), 18 months: 6% (AFT) /5% (GLMM), 24 months: 0.8% (AFT) /0.6% (GLMM). These models utilizing diverse and robust data sets predict higher probabilities of persistence than previously published, suggesting greater endurance of carriers subsequent to an outbreak. This study demonstrates the utility of statistical models to investigate the dynamics of persistent infection and the importance of large datasets, which can be achieved by combining data from several smaller studies in meta-analyses. Results of this study enhance current knowledge of the FMDV carrier state and may inform policy decisions regarding FMDV persistent infection.

59 BASIC BIOLOGICAL SCIENCES↗

Theoretical study of evaporation cross sections in the synthesis of very neutron-deficient nuclei

The synthesis of rare-earth neutron-deficient nuclei with large Z/N ratio {approx_equal}0.88 is studied within the framework of the standard statistical model. The fusion cross sections are calculated on the basis of the nuclear reaction video model. The deexcitation process is calculated with the help of the statistical code alice. It is found that the excitation functions can be predicted using a few exited experimental data by carefully choosing the input parameters in the statistical model. The results obtained show that a satisfactory description of the experimental evaporation cross sections requires a great reduction in the theoretical fission barriers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

coh3

CoH3 (CoH ver.3) is an optical model, exciton pre-equilibrium, and Hauser-Feshbach statistical model code, which calculates nuclear reaction cross sections for medium to heavy targets in the keV to MeV energy region. This program is written in standard C++, divided into approximately 200 source and header files. CoH solves the Schroedinger equation for optical potentials defined in the code, and calculates differential elastic scattering, reaction, and total cross sections, for neutron, proton, deuteron, triton, 3He, and alpha-particle. Deformed optical potentials are solved with the coupled-channels method, in which the ground state rotational band members, or vibrational phonon states are coupled. The optical model gives particle transmission coefficients that are fed into the statistical model calculations. CoH includes the pre-equilibrium model (exciton model), the direct/semidirect capture model, and the multi-stage Hauser-Feshbach statistical decay with width fluctuation correction based on the Gaussian orthogonal ensemble. For weakly coupled levels, the DWBA (distorted wave Born approximation) method is used to calculate the direct inelastic scattering process to the excited states.

Kawano, Toshihiko↗

Moist Process Biases in Simulations of the Madden–Julian Oscillation Episodes Observed during the AMIE/DYNAMO Field Campaign

Two Madden–Julian oscillation (MJO) episodes observed during the 2011 Atmospheric Radiation Measurement Program MJO Investigation Experiment (AMIE)/DYNAMO field campaign are simulated using a regional model with various cumulus parameterizations, a regional cloud-permitting model, and a global variable-resolution model with a high-resolution region centered over the tropical Indian Ocean. Model biases in relationships relevant to existing instability theories of MJO are examined and their relative contributions to the overall model errors are quantified using a linear statistical model. The model simulations capture the observed approximately log-linear relationship between moisture saturation fraction and precipitation, but precipitation associated with the given saturation fraction is overestimated especially at low saturation fraction values. This bias is a major contributor to the excessive precipitation during the suppressed phase of MJO. After accounting for this bias using a linear statistical model, the spatial and temporal structures of the model-simulated MJO episodes are much improved, and what remains of the biases is strongly correlated with biases in saturation fraction. The excess precipitation bias during the suppressed phase of the MJO episodes is accompanied by excessive column-integrated radiative forcing and surface evaporation. A large portion of the bias in evaporation is related to biases in wind speed, which are correlated with those of precipitation. Furthermore, these findings suggest that the precipitation bias sustains itself at least partly by cloud radiative feedbacks and convection–surface wind interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

β -delayed neutron emissions from N > 50 gallium isotopes

β-delayed γ-neutron spectroscopy has been performed on the decay of A = 84 to 87 gallium isotopes at the RI-beam Factory at the RIKEN Nishina Center using a high-efficiency array of 3 He neutron counters (BRIKEN). β-2n-γ events were measured in the decays of all of the four isotopes for the first time, which is direct evidence for populating the excited states of two-neutron daughter nuclei. Detailed decay schemes with the γ branching ratios were obtained for these isotopes, and the neutron emission probabilities (P xn ) were updated from the previous study. Hauser-Feshbach statistical model calculations were performed to understand the experimental branching ratios. We found that the P 1n and P 2n values are sensitive to the nuclear level densities of 1n daughter nuclei and showed that the statistical model reproduced the P 2n /P 1n ratio better when experimental levels plus shell-model level densities fit by the Gilbert-Cameron formula were used as the level-density input. We also showed the neutron and γ branching ratios are sensitive to the ground-state spin of the parent nucleus. Our statistical model analysis suggested J ≤ 3 for the unknown ground-state spin of the odd-odd nucleus 86 Ga, from the I γ (4 + → 2 + )/I γ (2 + → 0 + ) ratio of 84 Ga and the P 2n /P 1n ratio. In conclusion, these results show the necessity of detailed understanding of the decay scheme, including data from neutron spectroscopy, in addition to γ measurements of the multineutron emitters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved approximations of non-Gaussian probability, force, and energy of a single polymer chain

The mechanical behavior of polymers such as their probability density function (PDF), strain energy, and entropic force, has long been described by the non-Gaussian statistical model. Non-Gaussian models are often approximated by the Kuhn-Grün (KG) distribution function, which is derived from the first-order approximation of the complex Rayleigh's exact Fourier integral distribution. Furthermore, the KG function is widely accepted in polymer physics, where the non-Gaussian theory is often used to describe energy of the chains with various flexibility ratios. However, the KG function is shown to be relevant only for long chains and becomes extremely inaccurate for chains with fewer than 40 segments. In comparison to the KG model, other approximations of the non-Gaussian statistical model are often less accurate, and those with higher accuracy are usually too complex to be implemented in large-scale simulations. Here a new accurate approximation of the non-Gaussian PDF, entropic force, and strain energy of a single chain subsequently is developed to describe the mechanics of a polymer chain. With a similar level of complexity, the presented approximations of non-Gaussian PDF, strain energy, and entropic force are at least 10 times more accurate than KG approximations and thus are an excellent alternative option to be used in micromechanical constitutive models.

42 ENGINEERING↗

An evaluation of the variable-resolution CESM for modeling California's climate

In this paper, the recently developed variable-resolution option within the Community Earth System Model (VR-CESM) is assessed for long-term regional climate modeling of California at 0.25° (~ 28 km) and 0.125° (~ 14 km) horizontal resolutions. The mean climatology of near-surface temperature and precipitation is analyzed and contrasted with reanalysis, gridded observational data sets, and a traditional regional climate model (RCM)—the Weather Research and Forecasting (WRF) model. Statistical metrics for model evaluation and tests for differential significance have been extensively applied. VR-CESM tended to produce a warmer summer (by about 1–3°C) and overestimated overall winter precipitation (about 25%–35%) compared to reference data sets when sea surface temperatures were prescribed. Increasing resolution from 0.25° to 0.125° did not produce a statistically significant improvement in the model results. By comparison, the analogous WRF climatology (constrained laterally and at the sea surface by ERA-Interim reanalysis) was ~1–3°C colder than the reference data sets, underestimated precipitation by ~20%–30% at 27 km resolution, and overestimated precipitation by ~ 65–85% at 9 km. Overall, VR-CESM produced comparable statistical biases to WRF in key climatological quantities. Moreover, this assessment highlights the value of variable-resolution global climate models (VRGCMs) in capturing fine-scale atmospheric processes, projecting future regional climate, and addressing the computational expense of uniform-resolution global climate models.

54 ENVIRONMENTAL SCIENCES↗

In silico environmental chemical science: properties and processes from statistical and computational modelling

Quantitative structure–activity relationships (QSARs) have long been used in the environmental sciences. More recently, molecular modeling and chemoinformatic methods have become widespread. These methods have the potential to expand and accelerate advances in environmental chemistry because they complement observational and experimental data with “in silico” results and analysis. The opportunities and challenges that arise at the intersection between statistical and theoretical in silico methods are most apparent in the context of properties that determine the environmental fate and effects of chemical contaminants (degradation rate constants, partition coefficients, toxicities, etc.). The main example of this is the calibration of QSARs using descriptor variable data calculated from molecular modeling, which can make QSARs more useful for predicting property data that are unavailable, but also can make them more powerful tools for diagnosis of fate determining pathways and mechanisms. Emerging opportunities for “in silico environmental chemical science” are to move beyond the calculation of specific chemical properties using statistical models and toward more fully in silico models, prediction of transformation pathways and products, incorporation of environmental factors into model predictions, integration of databases and predictive models into more comprehensive and efficient tools for exposure assessment, and extending the applicability of all the above from chemicals to biologicals and materials.

54 ENVIRONMENTAL SCIENCES↗

First Direct Measurement Constraining the Ar 34 ( α , p ) K 37 Reaction Cross Section for Mixed Hydrogen and Helium Burning in Accreting Neutron Stars

The rate of the final step in the astrophysical αp process, the 34 Ar(α,p) 37 K reaction, suffers from large uncertainties due to a lack of experimental data, despite having a considerable impact on the observable light curves of x-ray bursts and the composition of the ashes of hydrogen and helium burning on accreting neutron stars. Here, we present the first direct measurement constraining the 34Ar(α,p)37K reaction cross section, using the Jet Experiments in Nuclear Structure and Astrophysics gas jet target. The combined cross section for the 34 Ar,Cl(α,p) 37 K,Ar reaction is found to agree well with Hauser-Feshbach predictions. The 34 Ar(α,2p) 36 Ar cross section, which can be exclusively attributed to the 34 Ar beam component, also agrees to within the typical uncertainties quoted for statistical models. This indicates the applicability of the statistical model for predicting astrophysical (α,p) reaction rates in this part of the αp process, in contrast to earlier findings from indirect reaction studies indicating orders-of-magnitude discrepancies. This removes a significant uncertainty in models of hydrogen and helium burning on accreting neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fully versus constrained statistical fragmentation of carbon clusters and their heteronuclear derivatives

The Microcanonical Metropolis Monte Carlo (MMMC) method has been shown to describe reasonably well fragmentation of clusters composed of identical atomic species. However, this is not so clear in the case of heteronuclear clusters as some regions of phase space might be inaccessible due to the different mobility of the different atomic species, the existence of large isomerization barriers, or the quite different chemical nature of the possible intermediate species. In this paper, we introduce a constrained statistical model that extends the range of applicability of the MMMC method to such mixed clusters. The method is applied to describe fragmentation of isolated clusters with high, moderate, and no heteronuclear character, namely, C n H m , C n N, and C n clusters for which experimental fragmentation branching ratios are available in the literature. We show that the constrained statistical model describes fairly well fragmentation of CnHm clusters in contrast with the poor description provided by the fully statistical model. The latter model, however, works pretty well for both C n and C n N clusters, thus showing that the ultimate reason for this discrepancy is the inability of the MMMC method to selectively explore the whole phase space. This conclusion has driven us to predict the fragmentation patterns of the C 4 N cluster for which experiments are not yet available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation Forecasting for Small Run-of-the-River Hydroelectric Systems Using Statistical Learning Models

With an increasing interest in constructing new run-of-the-river (ROR) hydroelectric generation over the more traditional reservoir-based hydroelectric systems, there is an increasing operational challenge due to the volatility of stream flow. The Snohomish County Public Utilities District (SnoPUD) has recently invested in the construction and operation of 3 new run-of-the-river projects in Northwestern Washington along Calligan Creek, Hancock Creek, and Youngs Creek. In order to effectively plan generation dispatch, SnoPUD has expressed interest in the development of an accurate forecasting tool to predict the generation capacity for these ROR systems. The following research project aims to use statistical learning models, namely Hidden Markov Models (HMMs), to predict day-ahead generation capacities for the aforementioned ROR systems. These models are constructed using 12 years of historical stream flow data collected at the intake sites and precipitation data recorded at the National Oceanic and Atmospheric Administration (NOAA) Alpine Meadows station. Four methods of constructing the models are studied for their forecast accuracies, and are compared with the persistence model. Despite using only one set of observable variables, the HMMs are shown to have slight improvements in accuracy over the persistence model approach, which shows great optimism for future work.

13 HYDRO ENERGY↗