Search NASA⌕ Search

SEARCH · Search NASA

Results for “Moisture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Leveraging Pre-storm Soil Moisture Estimates for Enhanced Land Surface Model Calibration in Ungauged Hydrologic Basins

Despite long-standing efforts, hydrologists still lack robust tools for calibrating land surface model (LSM) streamflow estimates within ungauged basins. Using surface soil moisture estimates from the Soil Moisture Active Passive Level 4 Soil Moisture (L4_SM) product, precipitation observations, and streamflow gauge measurements for 617 medium-scale (200-10,000 km2) basins in the contiguous United States, we measure the temporal (Spearman) rank correlation between antecedent (i.e., pre-storm) surface soil moisture (ASM) and the storm-scale runoff coefficient (RC; the fraction of storm-scale precipitation accumulation converted into streamflow). In humid and semi-humid basins, this rank correlation is shown to be sufficiently strong to allow for the substitution of storm-scale RC observations (available only in basins that are both lightly regulated and gauged) with high-quality ASM values (available quasi-globally from L4_SM) in streamflow calibration procedures. Using this principle, we define a new, basin-wise LSM streamflow calibration approach based on L4_SM alone and successfully apply it to identify LSM configurations that produce a high rank correlation with observed RC. However, since the approach cannot detect RC bias, it is less successful in identifying LSM configurations with low mean-absolute error. Plain Text Summary Accurately forecasting the fraction of rainfall that runs off into streams, as opposed to infiltrates into the soil, is critical for flash-flood prediction, water-resource monitoring, and tracking the transport of nutrients from agricultural fields into local waterways. Such forecasting is typically performed by hydrologic models that attempt to represent the physical processes responsible for surface runoff generation. However, to provide accurate streamflow forecasts, these models typically need to be calibrated against actual streamflow observations. This is problematic given the relatively poor, and declining, global availability of stream gauges. This paper presents a novel model calibration strategy that uses soil moisture from remote sensing and numerical modeling in place of streamflow observations during calibration. This transition has significant practical advantages because, unlike streamflow observations, the soil moisture data are continuously available across space. Our results demonstrate that this new approach can significantly improve hydrologic models within humid and semi-humid basins lacking sufficient ground-based instrumentation for traditional streamflow calibration.

hydrologic models↗

Skillful Forecasts of Basic Hydrological Quantities Through the Application of SMAP-Based Soil Moisture Retrievals

The top five centimeters of soil lie at the interface between the atmosphere and land; hydrological variations in the atmosphere communicate themselves to the land largely through this layer, and vice-versa. The estimates of near-surface soil moisture provided by the SMAP mission are thus central to studies of hydrological variability. In fact, recent analyses show that the hydrological variability captured in the SMAP soil moisture retrievals can be parlayed into useful hydrological predictions at various leads (weekly out to seasonal). Specifically, at a given location, using the antecedent time series of SMAP Level 2 soil moisture retrievals up to the start of a forecast, skillful predictions can be made of surface soil moisture anomalies at a 1-week lead, of evapotranspiration stress anomalies at a ~1 month lead, and of streamflow anomalies at a multi-month lead. The skill is derived in part from soil moisture memory (along with the interpretation of deeper soil moisture from the surface measurements) and from joint analyses, outside the forecast period, of the SMAP retrievals with existing observational hydrological datasets.

soil moisture retrievals↗

Influence of SMAP Soil Moisture Retrieval Assimilation on Runoff Estimation Across South Asia

This study was designed to characterize and quantify the influence of surface soil moisture assimilation on estimated runoff (surface flow and baseflow) and hydraulically-routed streamflow across three large river basins in South Asia that are at risk of impending water stress. Soil Moisture Active Passive (SMAP) surface soil moisture retrievals were assimilated into the Noah-MP land surface model. The gridded runoff was hydraulically routed to obtain volumetric streamflow values for a river network using a runoff routing module (Hydrological Modeling and Analysis Platform, HyMAP). The open loop (OL, model-only) and data assimilated (DA, includes soil moisture retrieval assimilation) Noah-MP runoff estimates highlighted the improvements in estimated total runoff across irrigated areas. Soil moisture assimilation impacted baseflow more relative to surface runoff. The HyMAP-based OL and DA streamflow generally underestimated the streamflow at upstream stations and overestimated the streamflow at downstream stations within the Indus basin due to missing physics related to reservoir operations. For stations located in the Ganges–Brahmaputra basins, the OL and DA estimation performance varied. The OL and DA results showed that the assimilation of soil moisture retrievals improves gridded runoff and volumetric streamflow across irrigated areas. Considerable relative change in streamflow (>70% increase in magnitude relative to OL) is noted after assimilation across the highly irrigated lower Indus basin and high precipitation regions in Bangladesh. Improving the modeling system’s representativeness of ground conditions via inclusion of water management information could improve large-scale streamflow modeling across South Asia.

soil moisture↗

The critical role of soil moisture in compound hazards

Soil moisture regulates the exchange of energy, water, and carbon across land–vegetation–atmosphere interfaces. Extremes in soil moisture can amplify natural hazards through interactions with diverse Earth system processes. Despite its mechanistic importance, soil moisture remains underrepresented in hazard research and predictive frameworks. Here, in this study, we review our current understanding of the role of soil moisture in the evolution and onset of diverse compound hazards by synthesizing the latest findings from observational and modelling studies. We highlight key soil moisture mechanisms, including atmospheric feedbacks that amplify drought–heatwave–wildfire events, precipitation couplings that promote clustered storms, and threshold responses that drive vegetation die-offs, trigger landslides, and induce flooding. Persistent challenges in observational data, model representation and operational implementation have limited the integration of soil moisture into hazard early-warning systems. Addressing these gaps through advances in observations, data assimilation, and physics-based and data-driven modelling will enhance hazard prediction and preparedness in a rapidly changing world.

Li, Chuxuan [University of California, Los Angeles↗

Modeling the Moisture Content and Dry Matter Loss in Dynamic Woody Biomass Storage Piles with Variable Extraction

The urgent need to mitigate climate change has spurred significant interest in renewable energy sources. This paper explores the storage and processing of woody biomass for biofuel production, considering the dynamic nature of biomass piles in real-world scenarios. A model has been developed to analyze moisture content changes and dry matter loss in woody biomass stored in piles prior to processing, taking into account varying extraction methods and environmental conditions. Case studies that examine the effects of different unpiling methods (FIFO, LIFO, and homogeneous) on moisture content and dry matter loss under various feedstock arrival rates and weather conditions are presented. Results indicate that unpiling methods significantly impact moisture content, with LIFO typically resulting in higher moisture content due to the utilization of fresher feedstock. Dry matter loss increases with pile size and time, emphasizing the importance of accurate modeling for assessing carbon emissions and feedstock quality. Furthermore, the model highlights the importance of process loading order and extraction methods in biomass storage, suggesting potential cost benefits associated with decreased moisture content. The difference between different extraction methods could vary the moisture content in the feedstock reaching the biofuel process by as much as 37.6%, however dry matter loss varies minimally for realistic pile changes. Overall, this research contributes to a better understanding of biomass storage dynamics and informs sustainable biofuel production practices.

Niska, Janel↗

Dead Fuel Moisture Content Reanalysis Dataset for California (2000–2020)

This study presents a novel reanalysis dataset of dead fuel moisture content (DFMC) across California from 2000 to 2020 at a 2 km resolution. Utilizing a data assimilation system that integrates a simplified time-lag fuel moisture model with 10-h fuel moisture observations from remote automated weather stations (RAWS) allowed predictions of 10-h fuel moisture content by our method with a mean absolute error of 0.03 g/g compared to the widely used Nelson model, with a mean absolute error prediction of 0.05 g/g. For context, the values of DFMC in California are commonly between 0.05 g/g and 0.30 g/g. The presented product provides gridded hourly moisture estimates for 1-h, 10-h, 100-h, and 1000-h fuels, essential for analyzing historical fire activity and understanding climatological trends. The methodology presented here demonstrates significant advancements in the accuracy and robustness of fuel moisture estimates, which are critical for fire forecasting and management.

Farguell, Angel (ORCID:000000032395220X)↗

Use of visible, near-infrared, and thermal infrared remote sensing to study soil moisture

Two methods are described which are used to estimate soil moisture remotely using the 0.4- to 14.0 micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).

Blanchard, M. B.↗

Use of visible, near-infrared, and thermal infrared remote sensing to study soil moisture

Two methods are used to estimate soil moisture remotely using the 0.4- to 14.0-micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).

Blanchard, M. B.↗

Analysis of surface moisture variations within large field sites

A statistical analysis was made on ground soils to define the general relationship and ranges of values of the field moisture relative to both the variance and coefficient of variation for a given test site and depth increment. The results of the variability study show that: (1) moisture variations within any given large field area are inherent and can either be controlled nor reduced; (2) neither a single value of the standard deviation nor coefficient of variation uniquely define the variability over the complete range of mean field moisture contents examined; and (3) using an upper bound standard deviation parameter clearly defines the maximum range of anticipated moisture variability. 87 percent of all large field moisture content standard deviations were less than 3 percent while about 96 percent of all the computed values had an upper bound of sigma=4 percent for these intensively sampled fields. The limit of accuracy curves of mean soil moisture measurements for large field sites relative to the required number of samples were determined.

Bell, K. R.↗

Moisture diffusion parameter characteristics for epoxy composites and neat resins

The moisture absorption characteristics of two graphite/epoxy composites and their corresponding cured neat resins were studied in high humidity and water immersion environments at elevated temperatures. Moisture absorption parameters, such as equilibrium moisture content and diffusion coefficient derived from data taken on samples exposed to high humidity and water soak environments, were compared. Composite swelling in a water immersion environment was measured. Tensile strengths of cured neat resin were measured as a function of their equilibrium moisture content after exposure to different moisture environments. The effects of intermittent moderate tensile loads on the moisture absorption parameters of composite and cured neat resin samples were determined.

Long, E. R., Jr.↗

Microwave backscatter dependence on surface roughness, soil moisture, and soil texture. II - Vegetation-covered soil

Results are presented for an experimental investigation to determine the relationship between radar backscatter coefficient (sigma) and soil moisture for vegetation-covered soil. These results extend a previous report which showed the experimental relationship between sigma and soil moisture for bare soil. It is shown that the highest correlation between sigma and soil moisture is 0.92 for the combined response of four crop types measured at 4.25 GHz, 10 deg incidence angle, and HH polarization. Radar look direction, relative to the crop row direction, is shown to have an insignificant effect on soil-moisture estimation if the radar frequency is higher than 4 GHz. The dependence on soil type can be minimized by expressing soil moisture in units of percent of field capacity. The possibility of using a single radar for measuring soil moisture for both bare and vegetated fields is demonstrated with a linear estimation algorithm having an experimental correlation coefficinet of 0.8.

Ulaby, F. T.↗

Experimental determination of the effects of moisture on composite-to-composite adhesive joints

The primary mode of moisture ingress into bonded composite joints is determined using a nuclear probe for deuterium (NPD) to measure the localized D2O content along the length of the adhesive (FM-300 and EA-9601) and through the thickness of bonded composite speciments. Calculated diffusivities and NPD measured equilibrium moisture contents are used to predict the moisture profiles along the length of the adhesives as a function of exposure time, temperature, and relative humidity. These results are compared with the observed moisture profiles to evaluate the extent of enhanced edge diffusion. The FM-300 adhesive exhibits good agreement between measured and predicted profiles at 49 C, 70% and 90% RH, and 77 C, 70% RH. At 77 C, 90% RH, the measured moisture content near the adhesive edge is substantially larger than the predicted level. The EA-9601 adhesive also shows good agreement at 49 C, 70% and 90% RH, but at 77 C, the concentration of D20 near the edges is enhanced at each humidity level. The effect of moisture content on the bond shear strength at room temperature and at elevated temperature is evaluated.

Deiasi, R. J.↗

Soil moisture sensing with microwave techniques

Microwave approaches for the remote sensing of soil moisture are discussed, with the advantages described as follows: (1) the all-weather capability, (2) the greater penetration depth into the soil and through vegetation than with optical or infrared sensors, and (3) the large changes in the dielectric properties of soil produced by changes in water content. Both active and passive microwave approaches are discussed. The dependence of the relationship between microwave response and soil moisture on such things as soil texture, surface roughness, vegetative cover and nonuniform moisture and temperature profiles is analyzed from both the experimental and theoretical viewpoints. The dielectric properties of the soil are analyzed quantitatively, as these control the reflective and emissive properties of the soil surface, and a model for estimating a soil's dielectric properties from its texture and moisture content is also presented. Emissivity is calculated using the Fresnel equation of electromagnetic theory, and reflectivity is shown to be decreased by surface roughness, while the backscatter coefficient increases. It is demonstrated, that microwave radiometers are sensitive to soil moisture for a wide range of surface conditions, and that the longer wavelengths are best for soil moisture sensing.

Schmugge, T.↗

Moisture dependence of positron annihilation rates in molecular substances

Positron annihilation rates have been studied in polymers and graphite-polymer composites as a function of their moisture content. The annihilation rates have been found to increase linearly with increasing moisture content in epoxies and polyamides, whereas no definite trends have been observed in polyimides. These experimental results have been used as the basis for the calculation of moisture content of several polymeric test specimens. For example, the directly measured moisture content of a Kevlar specimen was 45.5 + or - 5.0% of saturation value, whereas the moisture content on the basis of the decrease in positron lifetime was calculated to be 46.5 + or - 3.5%. Similarly, the directly measured moisture content of a graphite-epoxy composite (55 v/o fiber) was 19.2 + or - 0.6% of saturation value as opposed to a calculated value of 16.0 + or - 5.0%.

Singh, J. J.↗

A study of the influence of soil moisture on future precipitation

Forty years of precipitation and surface temperature data observed over 261 Local Climatic Data (LCD) stations in the Continental United States was utilized in a ground hydrology model to yield soil moisture time series at each station. A month-by-month soil moisture dataset was constructed for each year. The monthly precipitation was correlated with antecedent monthly precipitation, soil moisture and vapotranspiration separately. The maximum positive correlation is found to be in the drought prone western Great Plains region during the latter part of summer. There is also some negative correlation in coastal regions. The correlations between soil moisture and precipitation particularly in the latter part of summer, suggest that large scale droughts over extended periods may be partially maintained by the feedback influence of soil moisture on rainfall. In many other regions the lack of positive correlation shows that there is no simple answer such as higher land-surface evapotranspiration leads to more precipitation, and points out the complexity of the influence of soil moisture on the ensuring precipitation.

Fennessy, M. J.↗

Inversion algorithms for the microwave remote sensing of soil moisture. Experiments with swept frequency microwaves

Two experiments were performed employing swept frequency microwaves for the purpose of investigating the reflectivity from soil volumes containing both discontinuous and continuous changes in subsurface soil moisture content. Discontinuous moisture profiles were artificially created in the laboratory while continuous moisture profiles were induced into the soil of test plots by the environment of an agricultural field. The reflectivity for both the laboratory and field experiments was measured using bi-static reflectometers operated over the frequency ranges of 1.0 to 2.0 GHz and 4.0 to 8.0 GHz. Reflectivity models that considered the discontinuous and continuous moisture profiles within the soil volume were developed and compared with the results of the experiments. This comparison shows good agreement between the smooth surface models and the measurements. In particular the comparison of the smooth surface multi-layer model for continuous moisture profiles and the yield experiment measurements points out the sensitivity of the specular component of the scattered electromagnetic energy to the movement of moisture in the soil.

Hancock, G. D.↗

Moisture bursts over the tropical Pacific Ocean

The frequency and location of moisture bursts are examined. A moisture burst is described and defined, and this definition is applied to IR imagery for four six-month cool seasons (November-April) in the eastern North Pacific. It is observed that about ten moisture bursts/month occur during the cool seasons; the bursts last about 2-4 days and no more than 10 days; and they are distributed uniformly across the Pacific to the west of 110 deg W. The relation between the moisture bursts and the El Nino event of 1982-1983, and moisture bursts in the general circulation are analyzed. The analyses reveal that few bursts occur in the region associated with the El Nino event, and the moisture bursts resemble transient intensification of the mean meridional circulation in regions with a weak Hadley cell. Two modes for the behavior of the Hadley cell in the Pacific are proposed.

Mcguirk, James P.↗

Comparison of remote measurements of infrared surface temperatures and microwave soil moisture

Scatterometric measurements of active microwave soil water content and radiometric measurements of thermal IR surface temperatures were made simultaneously fron an aircraft flying 400 m over an agricultural region of France after harvesting. The surface temperatures were used to deterine soil moisture availability estimates according to the Carlson (1986) model. Surface temperature or soil moisture availability and microwave soil moisture were correlated. The standard error in the IR temperature and soil moisture availability due to influences other than soil moisture is found to be + or - 2 C. The standard deviation of the temperature/moisture availability is greater than this standard error. It is shown that correlations between soil water content and moisture availability improve with increasing spatial or temporal variance in the measure surface temperatures.

Perry, Eileen M.↗