Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multilayer films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

One-Dimensional Photonic Crystal Superprisms

Theoretical calculations indicate that it should be possible for one-dimensional (1D) photonic crystals (see figure) to exhibit giant dispersions known as the superprism effect. Previously, three-dimensional (3D) photonic crystal superprisms have demonstrated strong wavelength dispersion - about 500 times that of conventional prisms and diffraction gratings. Unlike diffraction gratings, superprisms do not exhibit zero-order transmission or higher-order diffraction, thereby eliminating cross-talk problems. However, the fabrication of these 3D photonic crystals requires complex electron-beam substrate patterning and multilayer thin-film sputtering processes. The proposed 1D superprism is much simpler in structural complexity and, therefore, easier to design and fabricate. Like their 3D counterparts, the 1D superprisms can exhibit giant dispersions over small spectral bands that can be tailored by judicious structure design and tuned by varying incident beam direction. Potential applications include miniature gas-sensing devices.

Ting, David↗
DOE OSTI2021

Large spin-to-charge conversion in ultrathin gold-silicon multilayers

Investigation of the spin Hall effect in gold has triggered increasing interest over the past decade, since gold combines the properties of a large bulk spin-diffusion length and strong interfacial spin-orbit coupling. However, discrepancies between the values of the spin Hall angle of gold reported in the literature have brought into question the microscopic origin of the spin Hall effect in Au. Here, we investigate the thickness dependence of the effective spin-charge conversion efficiency in single Au films and ultrathin Au/Si multilayers by nonlocal transport and spin-torque ferromagnetic resonance measurements. We show that the inferred effective spin-charge conversion efficiency is strongly enhanced in ultrathin Au/Si multilayers, reaching exceedingly large values of 0.99 ± 0.34 when the thickness of the individual Au layers is scaled down to 2 nm. These findings reveal the coexistence of a strong interfacial spin-to-charge conversion effect, which becomes dominant in ultrathin Au, and bulk spin Hall effect with a relatively low bulk spin Hall angle of 0.012 ± 0.005. Furthermore, our experimental results suggest the key role of the intrinsic spin Hall effect enhancement along with a strong interfacial spin-orbit coupling-related effect in the large spin-to-charge conversion in ultrathin Au.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Minimizing Oxygen Permeability in Chitin/Cellulose Nanomaterial Coatings by Tuning Chitin Deacetylation

The demand for packaging materials with low gas permeabilities is increasing, but commonly used petroleum-derived single-use plastics are not renewable, biodegradable, or easy to recycle. Nanomaterials composed of chitin and cellulose, which are abundant in nature, have high crystallinities and low oxygen permeabilities (OP), providing a viable alternative. In this work, we explore how deacetylation conditions of crab shell chitin can be used to tune the charge and size of resulting chitin nanowhiskers (ChNWs) and the resulting OP of layered film structures. Three deacetylation factors, the concentration of sodium hydroxide (%NaOH), temperature (T), and reaction time, were explored using a three-factor three-level Taguchi design with an orthogonal array. Furthermore, the resulting ChNW suspensions were sequentially spray-coated with suspensions of cellulose nanocrystals (CNCs) onto cellulose acetate (CA) films to form a multilayer structure. We show that ChNWs prepared under more aggressive deacetylation conditions inside the original orthogonal array (higher %NaOH, T, and time) had shorter lengths but the surface charge was significantly influenced only by more aggressive deacetylation outside of the original design conditions. With only ~10% decrease in the ultimate tensile strength and no significant loss in failure strain, the ChNW-CNC coating resulted in ~20% decrease in WVTR in comparison to uncoated CA films. The optimization of process conditions resulted in CA-ChNW-CNC films with a 91-99% decrease in OP (132-16.7 cm 3 ∙μm/m 2 /day/kPa versus 1553 cm3∙μm/m2/day/kPa for uncoated CA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Second-Order Josephson Effect in Excitonic Insulators

We show that in electron-hole bilayers with excitonic orders arising from conduction and valence bands formed by atomic orbitals that have different parities, nonzero interlayer tunneling leads to a second-order Josephson effect. This means the interlayer electrical current is related to the phase of the excitonic order parameter as J = J c sin 2θ instead of J = J c sin θ and that the system has two degenerate ground states at θ = 0, π that can be switched by an interlayer voltage pulse. When generalized to a three dimensional stack of alternating electron-hole planes or a two dimensional stack of chains, the ac Josephson effect implies that electric field pulses perpendicular to the layers and chains can steer the order parameter phase between the two degenerate ground states, making these devices ultrafast memories. Here, the order parameter steering also applies to the excitonic insulator candidate Ta 2 NiSe 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Process-Parameter-Dependent Optical and Structural Properties of ZrO2MgO Mixed-Composite Films Evaporated from the solid Solution

The process-parameter-dependent optical and structural properties of ZrO2MgO mixed-composite material have been investigated. Optical properties were derived from spectrophotometric measurements. By use of atomic force microscopy, x-ray diffraction analysis, and energy-dispersive x-ray (EDX) analysis, the surface morphology, grain size distributions, crystallographic phases, and process-dependent material composition of films have been investigated. EDX analysis made evident the correlation between the oxygen enrichment in the films prepared at a high level of oxygen pressure and the very low refractive index. Since oxygen pressure can be dynamically varied during a deposition process, coatings constructed of suitable mixed-composite thin films can benefit from continuous modulation of the index of refraction. A step modulation approach is used to develop various multilayer-equivalent thin-film devices.

Sahoo, N. K.↗
DOE OSTI2024

Dual Mechanism for Transient Capacitance Anomaly in Improper Ferroelectrics

Negative capacitance (NC) effects in ferroelectrics can potentially break fundamental limits of power dissipation known as “Boltzmann tyranny.” However, the origin of transient NC of ferroelectrics, which is attributed to two different mechanisms involving free-energy landscape and nucleation, is under intense debate. Here, we report the coexistence of transient NC and an S-shaped anomaly during the switching of ferroelectric hexagonal ferrites capacitor in an RC circuit. The early-stage NC arises from the nucleation process, while the late-stage S-shaped anomaly corresponds to a nascent NC associated with the free-energy landscape. The entire waveform can be reproduced using a hybrid model that simultaneously incorporates these two mechanisms. These results highlight the multivariable free-energy landscape of hexagonal ferrites that enables an abrupt change of the internal field and demonstrate that the two mechanisms are not mutually exclusive, resolving the long-standing debate. In conclusion, the behavior of the S-shaped anomaly also provides a pathway to extract parameters of free-energy landscape and switching dynamics.

Capacitance↗
NASA NTRS1988

RF surface resistance of YBa2Cu3O(7-x) thin films

The excitement engendered by the discovery of the new T sub c oxide superconductors has led to much speculation about practical applications of thin films of these materials in digital and analog electronic devices. Most of these envisioned applications involve high frequency signals for which a detailed knowledge of the surface impedance of the novel superconductors is very important. We have measured the surface resistance of thin films of YBaCuO in the frequency range 0.5 less than f less than 17 GHz using a stripline-resonator method. The stripline procedure also was used to measure the surface resistance of high quality gold and aluminum films; the resistance values obtained agree with values predicted from the measured dc resistance using the Pippard formalism for the anomalous skin effect. The YBaCuO were produced by a multilayer deposition process. The films are formed by e-beam evaporation of 24 layers of Y, Ba, and Cu. Films with the highest transition temperature were obtained using yttria-stabilized zirconia (YSZ) substrates. After deposition, the films are transferred to a furnace where they are annealed in flowing O2 at 850 C for 2h. The furnace then is turned off and allowed to cool to 100 C in about 16 h. Auger profiling of the films made by this process shows that the concentrations of Y, Ba, Cu, and O are uniform to within 1 percent throughout the thickness of the film.

Source record↗
DOE OSTI2025

Translational diffusion in supercooled water at and near the glass transition temperature—136 K

The properties of amorphous solid water at and near the calorimetric glass transition temperature, T g , of 136 K have been debated for years. One hypothesis is that water turns into a “true” liquid at T g (i.e., it becomes ergodic) and exhibits all the characteristics of an ergodic liquid, including translational diffusion. A competing hypothesis is that only rotational motion becomes active at T g , while the “real” glass transition in water is at a considerably higher temperature. To address this dispute, we have investigated the diffusive mixing in nanoscale water films, with thicknesses up to ∼100 nm, using infrared (IR) spectroscopy. The experiments used films that were composed of at least 90% H 2 O with D 2 O making up the balance and were conducted under conditions where H/D exchange was essentially eliminated. Because the IR spectra of multilayer D 2 O films (e.g., thicknesses of ∼3–6 nm) embedded within thick H 2 O films are distinct from the spectrum of isolated D 2 O molecules within H 2 O, the diffusive mixing of (initially) isotopically layered water films could be followed as a function of annealing time and temperature. The results show that water films with total thicknesses ranging from ∼20 to 100 nm diffusively mixed prior to crystallization for temperatures between 120 and 144 K. The translational diffusion had an Arrhenius temperature dependence with an activation energy of 40.8 ± 3.5 kJ/mol, which indicates that water at and near T g is a strong liquid. The measured diffusion coefficient at 136 K is 6.25 ± 1.4 × 10 −21 m 2 /s.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Calibration of the Multi-Spectral Solar Telescope Array multilayer mirrors and XUV filters

The Multi-Spectral Solar Telescope Array (MSSTA), a rocket-borne solar observatory, was successfully flown in May, 1991, obtaining solar images in eight XUV and FUV bands with 12 compact multilayer telescopes. Extensive measurements have recently been carried out on the multilayer telescopes and thin film filters at the Stanford Synchrotron Radiation Laboratory. These measurements are the first high spectral resolution calibrations of the MSSTA instruments. Previous measurements and/or calculations of telescope throughputs have been confirmed with greater accuracy. Results are presented on Mo/Si multilayer bandpass changes with time and experimental potassium bromide and tellurium filters.

Allen, Maxwell J.↗
NASA NTRS2022

Layer by layer thin film fabrication with in-process laser patterning

A modification of the traditional layer by layer process where the substrate is irradiated with laser light during the polycation and/or polyanion dipping cycles is described. By adjusting the laser irradiation time during dipping, irradiation power, number of bilayers, and the location and speed of laser irradiation, a variety of structures with controlled thicknesses can be fabricated. Laser patterned multilayer PAH/PTEBS polymer thin films were fabricated and characterized with absorbance mapping to demonstrate several patterning approaches. Results for 1) two laser patterned tracks, 2) single laser patterned track with varied average laser power across the sample from a continuously variable neutral density filter, and 3) laser patterning using a beam sent through multiple circular apertures are described. Based on the variable neutral density filter laser pattern, for 20 bilayer PAH/PTEBS films, an absorbance difference between off and on pattern of 0.1 requires an average laser power of less than 15 mW at 405 nm. The patterns produced are on the scale of several millimeters, though they could be made much smaller by focusing the laser used for patterning.

Nanoengineering↗
NASA NTRS1993

Magnetic and magneto-optical properties and domain structure of Co/Pd multilayers

The domain structure of Co/Pd(1.6/6.3 A)xN multilayers and its relation to the bulk magnetic properties of the samples were studied. The Co/Pd multilayers were deposited by rf and dc magnetron sputtering onto different substrates. It was found that magnetic and magnetooptical properties and domain structure of the multilayers were affected by total film thickness and substrate condition. Magnetization, coercivity, and anisotropy of the films decreased significantly as the film thickness dropped below 100 A. However, Kerr rotation angle had a maximum at the same thickness. The width of the domain structure increased with the decrease of the film thickness attaining the single domain state at N = 10. The initial curves in Co/Pd multilayers were found to depend on demagnetization process. The samples demagnetized by inplane field showed the largest difference between initial curves and the corresponding parts of the loops. Different domain structures were observed in the samples demagnetized by perpendicular and in-plane magnetic fields.

Gadetsky, S.↗
DOE OSTI2024

Optical second harmonic generation in anisotropic multilayers with complete multireflection of linear and nonlinear waves using ♯SHAARP.ml package

Abstract Optical second harmonic generation (SHG) is a nonlinear optical effect widely used for nonlinear optical microscopy and laser frequency conversion. Closed-form analytical solution of the nonlinear optical responses is essential for evaluating materials whose optical properties are unknown a priori. A recent open-source code, ♯SHAARP. si , can provide such closed form solutions for crystals with arbitrary symmetries, orientations, and anisotropic properties at a single interface. However, optical components are often in the form of slabs, thin films on substrates, and multilayer heterostructures with multiple reflections of both the fundamental and up to ten different SHG waves at each interface, adding significant complexity. Many approximations have therefore been employed in the existing analytical approaches, such as slowly varying approximation, weak reflection of the nonlinear polarization, transparent medium, high crystallographic symmetry, Kleinman symmetry, easy crystal orientation along a high-symmetry direction, phase matching conditions and negligible interference among nonlinear waves, which may lead to large errors in the reported material properties. To avoid these approximations, we have developed an open-source package named Second Harmonic Analysis of Anisotropic Rotational Polarimetry in Multilayers (♯SHAARP. ml ). The reliability and accuracy are established by experimentally benchmarking with both the SHG polarimetry and Maker fringes using standard and commonly used nonlinear optical materials as well as twisted 2-dimensional heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Abstract Superconducting radio-frequency (SRF) resonator cavities provide extremely high quality factors > 10 10 at 1–2 GHz and 2 K in large linear accelerators of high-energy particles. The maximum accelerating field of SRF cavities is limited by penetration of vortices into the superconductor. Present state-of-the-art Nb cavities can withstand up to 50 MV/m accelerating gradients and magnetic fields of 200–240 mT which destroy the low-dissipative Meissner state. Achieving higher accelerating gradients requires superconductors with higher thermodynamic critical fields, of which Nb 3 Sn has emerged as a leading material for the next generation accelerators. To overcome the problem of low vortex penetration field in Nb 3 Sn, it has been proposed to coat Nb cavities with thin film Nb 3 Sn multilayers with dielectric interlayers. Here, we report the growth and multi-technique characterization of stoichiometric Nb 3 Sn/Al 2 O 3 multilayers with good superconducting and RF properties. We developed an adsorption-controlled growth process by co-sputtering Nb and Sn at high temperatures with a high overpressure of Sn. The cross-sectional scanning electron transmission microscope images show no interdiffusion between Al 2 O 3 and Nb 3 Sn. Low-field RF measurements suggest that our multilayers have quality factor comparable with cavity-grade Nb at 4.2 K. These results provide a materials platform for the development and optimization of high-performance SIS multilayers which could overcome the intrinsic limits of the Nb cavity technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Distinguishing antiferromagnetic spin sublattices via the spin Seebeck effect

We measured spin Seebeck signals at the top and bottom surfaces of an antiferromagnetic Cr 2 O 3 film, using a Pt/Cr 2 O 3 /Pt trilayer. Our experimental data, combined with micromagnetic simulations, clearly demonstrate that the uncompensated sublattice at the top and bottom surfaces plays a decisive role in determining the symmetry of the spin Seebeck signals, providing fundamental insight for understanding the generation of spin Seebeck signal in antiferromagnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Interface diagnostics platform for thin-film solid-state batteries

Understanding the impedances of battery materials and their interfaces remains a major challenge, usually addressed by electrochemical impedance spectroscopy (EIS) where frequency-dependent complex impedance of full battery cells is measured and then modeled by a network of connected electrical elements. As conventionally applied, this approach produces ambiguity in that (1) multiple different network configurations may fit the data convincingly and (2) the method offers no direct association of the electrical elements with physical features of the battery. Here we present a new methodology that resolves both sources of ambiguity, enabled by expanding the experimental scope to directly inform the configuration of elements and their parameters in the network model. We demonstrate this methodology using thin film fabrication of solid state battery devices patterned by shadow masked sputter deposition, so that diagnostic devices corresponding to individual interface and material components can be fabricated simultaneously with full cell batteries. EIS models for the diagnostic devices can then be connected to form full cell networks whose topology matches the well-known physical configuration of the battery. When connected in this way, the full network model – made from connecting the diagnostic device EIS models – fits the full cell EIS data. For the case of a thin film solid state battery composed of amorphous silicon anode, lithium phosphorus oxynitride (LiPON) solid electrolyte, and lithium vanadium oxide (Li x V 2 O 5 ) cathode, we show that the approach allows us to identify ionic impedance/conductivity of the cathode/electrolyte as a limiting impedance and the anode/electrolyte interface cycling instability as a primary degradation factor.

25 ENERGY STORAGE↗
DOE OSTI2023

Anomalous superconducting diode effect in a polar superconductor

A superconductor with broken time-reversal and inversion symmetry may exhibit nonreciprocal charge transport, including a nonreciprocal critical current, also known as superconducting diode effect. Here, we report an intrinsic superconducting diode effect in a polar strontium titanate film. Differential resistance measurements reveal a superconducting state whose depairing current is polarity dependent. There is, however, no measurable deviation from Ohmic behavior, implying that this state does not arise from a bulk magnetochiral anisotropy. In the entire measurement range, the only deviation from linearity in the differential resistance is on the edge of the superconducting transition at high magnetic fields, likely due to the motion of flux vortices. Furthermore, the magnitude of the effect is preserved even when the in-plane magnetic field is oriented parallel to the current, indicating that this effect truly does not originate from a bulk magnetochiral anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Dispersion-Engineered Deep Sub-Wavelength Plasmonic Metasurfaces for Broadband Seira Applications

Surface enhanced infrared absorption (SEIRA) spectroscopy is a powerful tool in which plasmonically enhanced electromagnetic fields provide high-sensitivity molecular detection. Most SEIRA platforms operate at a single resonant frequency, which must be tuned to match that of the target molecule, and commonly rely on time-consuming lithographic techniques. This study presents a high-throughput and cost-effective plasmonic metasurface for broadband, tunable, and strong infrared signal enhancement. The platform is built upon the principle of dispersion-engineered plasmonic Fabry–Pérot (FP) nanocavity arrays. It offers 1) tight squeezing of infrared (IR) photons into deep sub-wavelength nano-volumes and 2) spectrally tunable near-field enhancements of up to ≈10 6 , two to three orders of magnitude higher than most optical metasurface systems. By coupling multilayer nano-thin film deposition and nanoskiving fabrication techniques, the dispersive FP metasurfaces can be rapidly and reproducibly constructed in a scalable and lithography-free manner. Using IR spectroscopy, the selective and sensitive label-free detection of a molecular monolayer is achieved at a range of frequencies. An enhancement factor of nearly 10 5 is measured at the carbonyl (C = O) vibrational marker band of the molecule. The confluence of high field enhancement, broadband plasmonic response, and facile fabrication makes this metasurface a promising platform for SEIRA spectroscopy.

36 MATERIALS SCIENCE↗