SEARCH · Search NASA

Results for “Navier Stokes solver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Effects of inlet distortion on the development of secondary flows in a subsonic axial inlet compressor rotor

Detailed flow measurements were taken inside an isolated axial compressor rotor operating subsonically near peak efficiency. Laser anemometer measurements were made with two inlet velocity profiles. One profile consisted of an unmodified baseline flow, and the second profile was distorted by placing axisymmetric screens on the hub and shroud well upstream of the rotor. A primary flow is defined in the rotor and deviations from this primary flow for each inlet flow condition identified. A comparison between the two flow deviations is made to assess the development of a passage vortex due to the distortion of the inlet flow. A comparison of experimental results with computational predictions from a Navier-Stokes solver showed good agreement between predicted and measured flow. Measured results indicate that a distorted inlet profile has minimal effect on the development of the flow in the rotor passage and the resulting passage vortex.

Owen, Albert K.↗

NASA NTRS1991

Development of iterative techniques for the solution of unsteady compressible viscous flows

Efficient iterative solution methods are being developed for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. Thus, the extra work required by iterative schemes can also be designed to perform efficiently on current and future generation scalable, missively parallel machines. An obvious candidate for iteratively solving the system of coupled nonlinear algebraic equations arising in CFD applications is the Newton method. Newton's method was implemented in existing finite difference and finite volume methods. Depending on the complexity of the problem, the number of Newton iterations needed per step to solve the discretized system of equations can, however, vary dramatically from a few to several hundred. Another popular approach based on the classical conjugate gradient method, known as the GMRES (Generalized Minimum Residual) algorithm is investigated. The GMRES algorithm was used in the past by a number of researchers for solving steady viscous and inviscid flow problems with considerable success. Here, the suitability of this algorithm is investigated for solving the system of nonlinear equations that arise in unsteady Navier-Stokes solvers at each time step. Unlike the Newton method which attempts to drive the error in the solution at each and every node down to zero, the GMRES algorithm only seeks to minimize the L2 norm of the error. In the GMRES algorithm the changes in the flow properties from one time step to the next are assumed to be the sum of a set of orthogonal vectors. By choosing the number of vectors to a reasonably small value N (between 5 and 20) the work required for advancing the solution from one time step to the next may be kept to (N+1) times that of a noniterative scheme. Many of the operations required by the GMRES algorithm such as matrix-vector multiplies, matrix additions and subtractions can all be vectorized and parallelized efficiently.

Sankar, Lakshmi N.↗

NASA NTRS1990

Numerical simulation of particle-wave interaction in boundary layers

The effects of wall injection and particle motion on the spatial stability of two-dimensional plane channel flow are investigated. For this purpose, an accurate Navier-Stokes solver to simulate the space-time evolution of disturbances in three-dimensional flows has been developed. The code is operational on the NASA Langley CRAY2 and can be ported to any other supercomputer. The code has been tested extensively in tracking the spatial evolution of two-dimensional disturbances in plane channel flow and provided excellent agreement with the linear theory including at the inflow/outflow boundaries. Preliminary calculations have been performed to investigate the effects of stationary and moving sources of vortical disturbances simulating a particle traveling in the flow field. Results suggest that even at very low amplitudes, vortical disturbances act as amplifiers on the Tollmien-Schlichting waves promoting rapid instability. It is also found that slow moving particles are more dangerous than both stationary and fast moving particles for the same disturbance levels.

Biringen, S.↗

NASA NTRS1990

Computation of Space Shuttle high-pressure cryogenic turbopump ball bearing two-phase coolant flow

A homogeneous two-phase fluid flow model, implemented in a three-dimensional Navier-Stokes solver using computational fluid dynamics methodology is described. The application of the model to the analysis of the pump-end bearing coolant flow of the high-pressure oxygen turbopump of the Space Shuttle main engine is studied. Results indicate large boiling zones and hot spots near the ball/race contact points. The extent of the phase change of the liquid oxygen coolant flow due to the frictional and viscous heat fluxes near the contact areas has been investigated for the given inlet conditions of the coolant.

Chen, Yen-Sen↗

NASA NTRS1990

A patched-grid algorithm for complex aircraft configurations

A patched-grid algorithm for the analysis of complex configurations with an implicit, upwind-biased Navier-Stokes solver is presented. Through the use of a generalized coordinate transformation at the zonal interface between two or more blocks, the algorithm can be applied to highly stretched viscous grids and to arbitrarily-shaped patch boundaries. Applications are made to the SR71 reconnaissance aircraft in a high-altitude environment at a supersonic speed and to the F/A-18 forebody-strake configuration at subsonic, high-alpha conditions, in support of the NASA High-Alpha Research Program.

Walters, Robert W.↗

NASA NTRS1991

Scramjet mixing establishment times for a pulse facility

A numerical simulation of the temporally developing flow through a generic scramjet combustor duct is presented for stagnation conditions typical of flight at Mach 13 as produced by a shock tunnel pulse facility. The particular focus is to examine the start up transients and to determine the time required for certain flow parameters to become established. The calculations were made with a Navier-Stokes solver SPARK with temporally relaxing inflow conditions derived from operation of the T4 shock tunnel at the University of Queensland in Australia. Calculations at nominal steady inflow conditions were made for comparison. The generic combustor geometry includes the injection of hydrogen fuel from the base of a centrally located strut. In both cases, the flow was assumed laminar and fuel combustion was not included. The establishment process is presented for viscous parameters in the boundary layer and for parameters related to the fuel mixing.

Rogers, R. Clayton↗

NASA NTRS1991

Numerical study of the effects of icing on fixed and rotary wing performance

The sectional and total aerodynamic load characteristics and performance degradation of swept wings and helicopter rotors have been studied using a three-dimensional, compressible Navier-Stokes solver. Correlations of predictions with experimental data for swept wings with and without leading-edge ice formation show the ability of the present computational technique to accurately predict both the distributed surface pressures and integrated sectional loads. The leading-edge flow separation and reattachment on the wing surface associated with the leading-edge ice are also captured well showing a vortex formation and the spanwise migration of the flow inside the separated flow region. In the case of the helicopter rotors in hover, the rotor thrust loss and the torque penalties due to the leading-edge ice formation are numerically demonstrated.

Kwon, Oh J.↗

NASA NTRS1991

A two-equation turbulence model for compressible reacting flows

A two-equation turbulence model (k-epsilon) has been modified to model compressible reacting flows. A compressibility correction model based on modeling the dilatational terms in the Reynolds stress equations has been used. Computations are carried out using the Navier-Stokes solver SPARK which includes a finite rate chemistry model for hydrogen-air combustion. Initially, planar compressible mixing layers are simulated. Comparisons of the predictions with available experimental data and the predictions of a compressible Reynolds stress closure indicate that the model is well suited for the study of such flows. The decrease in the growth rate of the mixing layer with increasing convective Mach number is well predicted. The model is then tested on a three-dimensional supersonic flow problem where solid boundaries are present. An axisymmetric nonreacting mixing layer flow involving dissimilar gases is evaluated next using the model and the predictions are compared with available experimental data. Finally, two reacting turbulent flow configurations have been studied and comparison of predictions and experimental data has been done. The comparisons indicate that the model predicts the overall features of the test cases very well.

Narayan, J. R.↗

NASA NTRS1991

Multitasking the INS3D-LU code on the Cray Y-MP

This paper presents the results of multitasking the INS3D-LU code on eight processors. The code is a full Navier-Stokes solver for incompressible fluid in three dimensional generalized coordinates using a lower-upper symmetric-Gauss-Seidel implicit scheme. This code has been fully vectorized on oblique planes of sweep and parallelized using autotasking with some directives and minor modifications. The timing results for five grid sizes are presented and analyzed. The code has achieved a processing rate of over one Gflops.

Fatoohi, Rod↗

NASA NTRS1991

CFD analysis of a hydrogen fueled ramjet engine at Mach 3.44

The full Navier-Stokes solver, RPLUS, has been used to compute the flow field of a ramjet engine in the low supersonic operating regime. Computations have been made for the case where hydrogen is transversely injected and ignited using nine species and eighteen reactions to model the combustion process. The flow fields for two methods of hydrogen injection have been computed and compared to the available experimental data. The purpose of these computations was to assess the mixing effectiveness of the injected hydrogen with the primary supersonic stream. Results indicate significant ignition delay resulting from the poor mixing dynamics in the combustor section.

Duncan, Beverly↗

NASA NTRS1991

Use of the PARC code for generic NASP nozzles operating at off-design transonic conditions

A three-dimensional Navier-Stokes solver, PARC3D, has been investigated for applications to the wind tunnel testing of high-speed nozzle configurations, particularly with extended expansion ramps, operating at transonic off-design conditions. Numerous cases have been run and compared with existing wind tunnel data. The code has been shown to be an efficient and robust tool in the analysis of complex nozzle configurations whose flows are substantially determined by three-dimensional effects. Although the method requires that a grid, generated independently of the code, be supplied to it, the robust nature of the code does not require that this grid be excessively detailed, nor does it seem to require that the grid be fine-tuned for individual cases. The directness and flexibility of the boundary condition specifications allow a variety of configurations and flow conditions to be handled very efficiently.

Yaros, Steven F.↗

NASA NTRS1991

Periodic blade loads of a high speed propeller at small angle of attack

A code has been developed to predict the periodic aerodynamic loads of an advanced turboprop propeller. The analytical formulation accounts for flow three-dimensionality and flow periodicity due to the propeller inclination. The flow past the blade sections is computed using a thin layer Navier-Stokes solver. An iterative procedure is used to account for the induced axial and rotational velocities. The viscous periodic results are obtained for an eight-bladed Hamilton Standard SR-7L advanced propeller at a cruise Mach number of 0.813 and 35,000 ft. altitude. The results are shown for flow field quantities and performance parameters during the blade passage in the plane of rotation illustrating the periodic nature of blade flow separation and shocks. The time averaged coefficients of thrust and power are computed and compared with available flight test data. The results obtained show excellent agreement at cruise conditions for small nacelle angles of attack.

Takallu, M. A.↗

NASA NTRS1991

Assessment of meanflow solutions for instability analysis of transitioning flows

Meanflow solutions of 3D supersonic flow past a cone at incidence and a swept leading edge wing have been obtained by thre methods, viz., boundary-layer, parabolized Navier-Stokes, and thin shear-layer Navier-Stokes solvers. The smoothness and accuracy of the solution profiles are compared with a view to applying the meanflow solution to boundary-layer stability analysis.

Iyer, Venkit↗

NASA NTRS1991

Low thrust viscous nozzle flow field predictions

The low thrust viscous nozzle flows have been studied numerically by using the steady-state Reynolds-averaged Navier-Stokes equations in conservative form. A new Lower-Upper factorization scheme in the axisymmetric coordinate system has been developed and is analyzed in this paper. This new Navier-Stokes solver has shown that the numerical analog is accurate and stable for the convergent and divergent nozzle flowfield calculation. The range of the chamber pressure is (1.85-29.4)psi with the chamber temperature equal to 600 F. The results are compared with the data collected in the NASA/MSFC vacuum chamber, and they are in very reasonable agreement.

Chou, L. C.↗

NASA NTRS1991

Space Station resource node flow field analysis

An analysis of the flow field within the Space Station Freedom resource node with operational intermodule ventilation and temperature/humidity control ventilation systems has been conducted. The INS3D code, an incompressible, steady-state Navier-Stokes solver has been used to assess the design of the ventilation system via quantification of the level of fluid mixing and identification of 'dead air' regions and short-circuit ventilation. Numerical results indicate significant short-circuit ventilation in the forward and midsections of the node and insufficient fluid mixing is found to exist in the aft node section. These results as well as results from a solution grid dependence study are presented.

Kania, Lee↗

NASA NTRS1991

An assessment of computational fluid dynamic techniques in the analysis and design of turbomachinery - The 1990 Freeman Scholar Lecture

Various computational fluid dynamic techniques are reviewed focusing on the Euler and Navier-Stokes solvers with a brief assessment of boundary layer solutions, and quasi-3D and quasi-viscous techniques. Particular attention is given to a pressure-based method, explicit and implicit time marching techniques, a pseudocompressibility technique for incompressible flow, and zonal techniques. Recommendations are presented with regard to the most appropriate technique for various flow regimes and types of turbomachinery, incompressible and compressible flows, cascades, rotors, stators, liquid-handling, and gas-handling turbomachinery.

Lakshminarayana, B.↗

NASA NTRS1992

Semi-empirical model for prediction of unsteady forces on an airfoil with application to flutter

A semi-empirical model is described for predicting unsteady aerodynamic forces on arbitrary airfoils under mildly stalled and unstalled conditions. Aerodynamic forces are modeled using second order ordinary differential equations for lift and moment with airfoil motion as the input. This model is simultaneously integrated with structural dynamics equations to determine flutter characteristics for a two degrees-of-freedom system. Results for a number of cases are presented to demonstrate the suitability of this model to predict flutter. Comparison is made to the flutter characteristics determined by a Navier-Stokes solver and also the classical incompressible potential flow theory.

Mahajan, Aparajit J.↗

NASA NTRS1992

Development of iterative techniques for the solution of unsteady compressible viscous flows

The development of efficient iterative solution methods for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations is discussed. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. In this work, another approach based on the classical conjugate gradient method, known as the Generalized Minimum Residual (GMRES) algorithm is investigated. The GMRES algorithm has been used in the past by a number of researchers for solving steady viscous and inviscid flow problems. Here, we investigate the suitability of this algorithm for solving the system of non-linear equations that arise in unsteady Navier-Stokes solvers at each time step.

Sankar, Lakshmi N.↗