Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Fiber-optic bolometers with high-temperature tolerance and reduced time constants for fusion plasma diagnostics

Fiber-optic bolometers (FOBs) designed for plasma radiation measurement in magnetically confined fusion environments have been previously developed and tested at the DIII-D tokamak. These FOBs utilize a silicon Fabry–Perot interferometer at the fiber tip for temperature measurement and a gold disk as a radiation absorber. This paper presents recent advancements in the development of FOBs with reduced cooling time constants and enhanced temperature tolerance. We also demonstrate high-temperature operation and report findings from irradiation tests. By incorporating a copper sensor holder as a thermal sink and integrating two closely packed sensor heads into a compact design, the cooling time constants were reduced to ∼100 ms in vacuum, while minimizing uncertainties caused by temperature gradients. The FOBs were subjected to heating at 400 °C for five hours, with no observed degradation in noise performance post-heating. High-temperature operation tests were conducted at ∼220 °C using a 404 nm square-wave modulated laser to simulate the plasma radiation. In addition, four FOBs constructed from copper-coated pure-silica fibers were fabricated and underwent irradiation testing, enduring a total γ-radiation dose of 15.2 MGy and a neutron fluence of 1.6 × 10 18 n/cm 2 . As a result, the FOBs maintained their physical integrity and the optical signal shows high visibility throughout the test.

42 ENGINEERING↗
DOE OSTI2025

Atomic-scale imaging of frequency-dependent phonon anisotropy

Directly visualizing vibrational anisotropy in individual phonon modes is essential for understanding a wide range of intriguing optical, thermal and elastic phenomena in materials. Although conventional optical and diffraction techniques have been used to estimate vibrational anisotropies, they fall short in achieving the spatial and energy resolution necessary to provide detailed information. Here, we introduce a new form of momentum-selective electron energy-loss spectroscopy, which enables the element-resolved imaging of frequency- and symmetry-dependent vibrational anisotropies with atomic resolution. Vibrational anisotropies manifest in different norms of orthogonal atomic displacements, known as thermal ellipsoids. Using the centrosymmetric strontium titanate as a model system, we observed two distinct types of oxygen vibrations with contrasting anisotropies: oblate thermal ellipsoids below 60 meV and prolate ones above 60 meV. In non-centrosymmetric barium titanate, our approach can detect subtle distortions of the oxygen octahedra by observing the unexpected modulation of q-selective signals between apical and equatorial oxygen sites near 55 meV, which originates from reduced crystal symmetry and may also be linked to ferroelectric polarization. These observations are quantitatively supported by theoretical modelling, which demonstrates the reliability of our approach. The measured frequency-dependent vibrational anisotropies shed new light on the dielectric and thermal behaviours governed by acoustic and optical phonons. Furthermore, the ability to visualize phonon eigenvectors at specific crystallographic sites with unprecedented spatial and energy resolution opens new avenues for exploring dielectric, optical, thermal and superconducting properties.

Ferroelectrics and multiferroics↗
DOE OSTI2025

Electromagnetic Analysis of ITER Electron Cyclotron Emission Components and Support Structures for the Preliminary Design Review

The ITER electron cyclotron emission (ECE) diagnostic system is located at Design Shield Module (DSM) 2, Equatorial Port (EP) 9 to measure electron temperature profile and electron temperature fluctuations and also to assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two couples of mirrors for two different optical views. This ECE diagnostic system shall be exposed to significant power due to unabsorbed electron cyclotron heating power in the plasma. It shall also receive large electromagnetic (EM) loads up to 100 MN/m 3 force density due to the eddy currents generated by the short 16-ms transient plasma disruption. The global EM models of EP12 and EP11 with the worst case of plasma disruption Major Disruption Downward Exponential 16 ms Category III (MD_DW_EXP16MS_CATIII) have been provided by ITER. However, the support structure for these critical components, including four mirrors, is still under the design and development phase, especially during the period of preliminary design reviews (PDRs). For those small in-vessel components that are not modeled explicitly for the PDRs, we can extract the magnetic field (B) data and flux variations (dB/dt) at those locations from the global model and then use the B and dB/dt method to calculate the eddy currents, EM forces, and torques on those components in the local submodels. In conclusion, this paper will present the detailed PDR EM analysis results of the ECE components and support structures.

Electromagnetic↗
DOE OSTI2024

High-pressure characterization of Ag 3 AuTe 2 : Implications for strain-induced band tuning

Recent band structure calculations have suggested the potential for band tuning in the chiral semiconductor Ag 3 AuTe 2 to zero upon application of negative strain. In this study, we report on the synthesis of polycrystalline Ag 3 AuTe 2 and investigate its transport and optical properties and mechanical compressibility. Transport measurements reveal the semiconducting behavior of Ag 3 AuTe 2 with high resistivity and an activation energy E a of 0.2 eV. The optical bandgap determined by diffuse reflectance measurements is about three times wider than the experimental E a ⁠. Despite the difference, both experimental gaps fall within the range of predicted bandgaps by our first-principles density functional theory (DFT) calculations employing the Perdew–Burke–Ernzerhof and modified Becke–Johnson methods. Furthermore, our DFT simulations predict a progressive narrowing of the bandgap under compressive strain, with a full closure expected at a strain of –4% relative to the lattice parameter. To evaluate the feasibility of gap tunability at such substantial strain, the high-pressure behavior of Ag 3 AuTe 2 was investigated by in situ high-pressure x-ray diffraction up to 47 GPa. Mechanical compression beyond 4% resulted in a pressure-induced structural transformation, indicating the possibility of substantial gap modulation under extreme compression conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Insulating ground state and 2−𝑘 magnetic structure of candidate Weyl hydrogen-atom K2⁢Mn3⁢(AsO4)3

The ideal Weyl "hydrogen-atom" semimetal exhibits only a single pair of Weyl nodes and no other trivial states at the Fermi energy. Such a material would be a panacea in the study of Weyl quasi-particles, allowing direct unambiguous observation of their topological properties. The alluaudite-like K2⁢Mn3⁢(AsO4)3 compound was recently proposed as such a material. Here, we use comprehensive experimental work and first-principle calculations to assess this prediction. We find K2⁢Mn3⁢(AsO4)3 crystallizes in the 𝐶⁢2/𝑐 symmetry with a quasi-one-dimensional Mn sublattice, growing as small needle-like crystals. Bulk property measurements reveal magnetic transitions at ≈8 and ≈4 K, which neutron scattering experiments show correspond to two distinct magnetic orders, first a partially ordered ferrimagnetic 𝐤𝟏=(0,0,0) structure at 8 K and a second transition of 𝐤𝟐=(1,0,0) at 4 K to a fully ordered state. Below the second transition, both ordering vectors are necessary to describe the complex magnetic structure with modulated spin magnitudes. Both of the best-fit magnetic structures in this work are found to break the symmetry necessary for the generation of Weyl nodes, though one of the magnetic structures allowed by 𝐤𝟏 does preserve this symmetry. However, the crystals are optically transparent and ellipsometry measurements reveal a large band gap, undermining expectations of semimetallic behavior. Density functional theory calculations predict an insulating antiferromagnetic ground state, in contrast to previous reports, and suggest potential frustration on the magnetic sublattice. Given the wide tunability of the alluaudite structure, we consider ways to push the system closer to a semimetallic state.

Taddei, Keith M [Argonne National Laboratory]↗
DOE OSTI2025

Single photon emitters in van der Waals solids for quantum photonics: materials, theory and molecular-scale characterization probes

Strong light–matter interactions in two-dimensional layered materials (2D materials) have attracted the interest of researchers from interdisciplinary fields for more than a decade now. A unique phenomenon in some 2D materials is their large exciton binding energies (BEs), increasing the likelihood of exciton survival at room temperature. It is this large BE that mediates the intense light–matter interactions of many of the 2D materials, particularly in their monolayer limit, where the interplay of excitonic phenomena poses a wealth of opportunities for high-performance optoelectronics and quantum photonics. Within quantum photonics, quantum information science (QIS) is growing rapidly, where photons are a promising platform for information processing due to their low-noise properties, excellent modal control, and long-distance propagation. A central element for QIS applications is a single photon emitter (SPE) source, where an ideal on-demand SPE emits exactly one photon at a time into a given spatiotemporal mode. Recently, 2D materials have shown practical appeal for QIS which is directly driven from their unique layered crystalline structure. This structural attribute of 2D materials facilitates their integration with optical elements more easily than the SPEs in conventional three-dimensional solid state materials, such as diamond and SiC. In this review article, we will discuss recent advances made with 2D materials towards their use as quantum emitters, where the SPE emission properties maybe modulated deterministically. Here, the use of unique scanning tunneling microscopy tools for the in-situ generation and characterization of defects is presented, along with theoretical first-principles frameworks and machine learning approaches to model the structure-property relationship of exciton–defect interactions within the lattice towards SPEs. Given the rapid progress made in this area, the SPEs in 2D materials are emerging as promising sources of nonclassical light emitters, well-poised to advance quantum photonics in the future.

2D layered materials↗
DOE OSTI2024

Screening of Polar Electron-Phonon Interactions near the Surface of the Rashba Semiconductor BiTeCl

Understanding electron-phonon coupling in noncentrosymmetric materials is critical for controlling the internal fields which give rise to Rashba interactions. We apply time- and angle-resolved photoemission spectroscopy (trARPES) to study coherent phonons in the surface and bulk regions of the polar semiconductor BiTeCl. Aided by \textit{ab initio} calculations, our measurements reveal the coupling of out-of-plane $A_1$ modes and an in-plane $E_2$ mode. By considering how these modes modulate the electric dipole moment in each unit cell, we show that the polar $A_1$ modes are more effectively screened in the metallic surface region, while the non-polar $E_2$ mode couples in both regions. Finally, in addition to informing strategies to optically manipulate Rashba interactions, this work has broader implications for the behavior of electron-phonon coupling in systems characterized by inhomogeneous dielectric environments.

36 MATERIALS SCIENCE↗
DOE OSTI2026

CHEQUP v0.1

CHEQUP (Castro-based Hofi Expansion with QUasineutral Plasma) is a simulation code for modeling the formation of hydrodynamic optical-field-ionized (HOFI) plasma channels, which are used as waveguides in laser-plasma acceleration experiments. This includes experiments performed at LBNL's BELLA facility as well as other laser facilities across the world. CHEQUP extends the open-source Castro hydrodynamics framework with physics modules tailored for modeling HOFI plasma channels -- including multi-species ionization and three-body recombination for mixtures of hydrogen, nitrogen, helium, and argon ; a two-temperature model tracking electron and heavy-species temperatures separately ; and coupling with other codes of the BLAST ecosystem (https://blast.lbl.gov/) such as WarpX, via the openPMD standard. CHEQUP inherits from Castro the ability to run on modern GPU architectures (NVIDIA CUDA, AMD HIP) and supports adaptive mesh refinement (AMR) for efficient multi-scale resolution. Compared to existing tools, CHEQUP would be, to our knowledge, the first open-source code implementing the full HOFI channel formation physics, and the first implementation capable of running on GPUs. This enables significantly faster, large-scale parameter scans critical for the design of next-generation LPA-based accelerators and light sources.

Lehe, Remi [Lawrence Berkeley National Laboratory ↗
DOE OSTI2024

Deployment of POLARBEAR-2b

POLARBEAR-2b (PB-2b) is the second receiver in the Simons Array, a cosmic microwave background (CMB) polarization experiment. The Simons Array uses dichroic polarization sensitive lenslet-coupled sinuous antennas and transition-edge sensor (TES) bolometers made of superconducting films. These bolometers are read out with frequency multiplexing electronics. PB-2b contains ~7500 detectors in two bands at 90 and 150 GHz with arcminute resolution. The polarization of these detectors is modulated by a cryogenic continuously rotating half-wave plate. PB-2b was installed on its telescope in 2022 in the Atacama Desert at an altitude of 5.2 km. This paper will detail initial readout commissioning, test of a new loopgain monitoring method, and focusing the optics. Work is ongoing to commission the remaining ambient temperature readout electronics, measure detector time constants, and observe with the cryogenic half-wave plate spinning.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Electromagnetic Analysis of ITER Electron Cyclotron Emission Model

The ITER electron cyclotron emission (ECE) diagnostic system is located at diagnostics shielding module 2 (DSM2), equatorial port 9 (EP9), to measure electron temperature profile and electron temperature fluctuations, and also assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two hot sources for calibration and two couples of mirrors for two different optical views. It shall receive that the large electromagnetic (EM) loads up to 100-MN/m3 force density due to the eddy currents on the copper mirrors generated by the short transient plasma disruption. The simplified EM analysis model using magnetic field ( B ) data and flux variations (dB/dt) method based on the worst case of plasma disruption, MD_DW_EXP16MS_CATIII, has been developed to calculate the force and moments for each ECE component and support structure for EP9 DSM2 Bay2 and Bay3. The B and dB/dt methods use the constant B and dB/dt assumed for each local bay space, but the real B and dB/dt are basically varied along the radial direction of each bay. The complex global model with the local ECE components and support structure using Maxwell transient has been developed to do EM analysis to compare the results of the B and dB/dt models. The volumetric EM force density of the whole ECE components and support structure can be used for the subsequent structural analysis. In conclusion, combined with the thermal and nuclear loads and seismic and initial loads, the ECE integration analysis can be finalized for the operation case.

Fang, J. [Princeton Plasma Physics Laboratory (PPP↗
DOE OSTI2025

High-repetition rate, CEP-stable shortwave infrared source with two-cycle pulses for field-resolved spectroscopy

We report on a passively carrier-envelope phase (CEP)-stable optical parametric amplifier generating two-cycle pulses at 2060 nm with energies of up to 2.25 µJ operating at a repetition rate of 400 kHz, specifically designed for applications in field-resolved spectroscopy. The measured pulse duration is 13.6 fs, resulting in two cycles of the carrier wave. Due to the robust CEP-stable front-end design, we achieve an open-loop CEP stability of 250 mrad (rms) and the capability for fast CEP modulation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

In-orbit operation of Resolve Filter Wheel and modulated X-ray source

The Resolve soft X-ray spectrometer is a high spectral resolution microcalorimeter spectrometer for the X-ray Imaging and Spectroscopy Mission. In the beam of Resolve, there is a filter wheel containing X-ray filters. In the beam, there is also an active calibration source, the modulated X-ray source (MXS), which can provide pulsed X-rays to facilitate gain calibration. The filter wheel consists of six filter positions. Two open positions, one 55 Fe source to aid in spectrometer characterization during the commissioning phase, and three transmission filters: a neutral density filter, an optical blocking filter, and a beryllium filter. The X-ray intensity, pulse period, and pulse separation of an MXS are highly configurable. Furthermore, the switch-on time is synchronized with the spacecraft’s internal clock to give accurate start and end times of the pulses. One of the issues raised during ground testing was the susceptibility of an MXS at high voltage to ambient light. Although measures were taken to mitigate the light leak, the efficacy of those measures must be verified in orbit. Along with an overview of issues raised during ground testing, we will discuss the calibration source and the filter performance in-flight and compare with the transmission curves present in the Resolve calibration database.

X-ray Imaging and Spectroscopy Mission/Resolve↗
DOE OSTI2026

Silicon-On-Sapphire Metasurfaces Generate Arrays of Dark and Bright Traps for Neutral Atoms

We demonstrated crystalline silicon-on-sapphire (c-SOS) metasurfaces that convert a Gaussian beam into arrays of complex optical traps, including arrays of optical bottle beams that trap atoms in dark regions interleaved with bright tweezer arrays. The high refractive index and indirect band gap of crystalline silicon make it possible to design high-resolution near-infrared (λ > 700 nm) metasurfaces that can be manufactured at scale using CMOS-compatible processes. Compared with active components like spatial light modulators (SLMs) that have become widely used to generate trap arrays, metasurfaces provide an indefinitely scalable number of pixels, enabling large arrays of complex traps in a very small form factor, as well as reduced dynamic noise. To design metasurfaces that can generate three-dimensional bottle beams to serve as dark traps, we modified the Gerchberg-Saxton algorithm to enforce complex-amplitude profiles at the focal plane of the metasurface and to optimize the uniformity of the traps across the array. We fabricated and measured c-SOS metasurfaces that convert a Gaussian laser beam into arrays of bright traps, dark traps, and interleaved bright/dark traps.

Gerchberg-Saxton↗
DOE OSTI2024

Power over fiber development for HEP detectors

Power-over-Fiber (PoF) technology has been used extensively in settings where high voltages require isolation from ground and electromagnetic isolation is critical. In cryogenic environments, PoF offers a reliable power transmission technology, leveraging optical fibers to transfer power with minimal system degradation. PoF technology excels in maintaining low noise levels and isolation when delivering power to sensitive electronic systems operating in extreme temperature ranges and high voltage environments. Here, in a novel application of PoF for a HEP detector, power is provided to photon detector modules located on a surface at ~300 kV with respect to ground in the planned DUNE experiment. This summary paper of the PoF talk at the 16th PISA Meeting on Advanced Detectors highlights the R&D effort of PoF in extreme conditions and underscores its capacity to revolutionize power delivery and management in critical applications offering a dependable solution with low noise, optimal efficiency, and superior isolation. The DUNE (Abi et al., 2020) experiment will soon deploy large liquid argon (LAr) time projection chambers (TPC) to detect neutrino interactions and other particle physics phenomena. In addition to the particle tracking provided by the TPC, photon detectors, powered by a first ever PoF system, in the cryostat will leverage the high scintillation light yield of LAr to provide crucial timing and additional calorimetric information.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Theoretical and experimental analysis of the modulated phase grating X-ray interferometer

X-ray grating interferometry allows for the simultaneous acquisition of attenuation, differential-phase contrast, and dark-field images, resulting from X-ray attenuation, refraction, and small-angle scattering, respectively. The modulated phase grating (MPG) interferometer is a recently developed grating interferometry system capable of generating a directly resolvable interference pattern using a relatively large period grating envelope function that is sampled at a pitch that is small enough that X-ray spatial coherence can be achieved by using a microfocus X-ray source or G0 grating. We present the theory of the MPG interferometry system for a 2-dimensional staggered grating, derived using Fourier optics, and we compare the theoretical predictions with experiments we have performed with a microfocus X-ray system at Pennington Biomedical Research Center, LSU. The theoretical and experimental fringe visibility is evaluated as a function of grating-to-detector distance. Additionally, quantitative experiments are performed with porous carbon and alumina compounds, and the mean normalized dark-field signal is compared with independent porosimetry measurements. Qualitative analysis of attenuation and dark-field images of a dried anchovy are shown.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Observation of the axion quasiparticle in 2D MnBi 2 Te 4

The axion is a hypothetical fundamental particle that is conjectured to correspond to the coherent oscillation of the θ field in quantum chromodynamics. Its existence would solve multiple fundamental questions, including the strong CP problem of quantum chromodynamics and dark matter, but the axion has never been detected. Electrodynamics of condensed-matter systems can also give rise to a similar θ, so far studied as a static, quantized value to characterize the topology of materials. Coherent oscillation of θ in condensed matter has been proposed to lead to physics directly analogous to the high-energy axion particle—the dynamical axion quasiparticle (DAQ). Here we report the observation of the DAQ in MnBi 2 Te 4 . By combining a two-dimensional electronic device with ultrafast pump–probe optics, we observe a coherent oscillation of θ at about 44 gigahertz, which is uniquely induced by its out-of-phase antiferromagnetic magnon. This represents direct evidence for the presence of the DAQ, which in two-dimensional MnBi 2 Te 4 is found to arise from the magnon-induced coherent modulation of the Berry curvature. The DAQ also has implications in light–matter interaction and coherent antiferromagnetic spintronics, as it might lead to axion polaritons and electric control of ultrafast spin polarization. Finally, the DAQ could be used to detect axion particles. We estimate the detection frequency range and sensitivity in the millielectronvolt regime, which has so far been poorly explored.

topological matter↗
DOE OSTI2024

Mid-IR UAV-based sensing platform with deep learning to Identify and Quantify Gaseous Emission in Gas Flares

This report details the development and evaluation of a Mid-Infrared (Mid-IR) Unmanned Aerial Vehicle (UAV)-based sensing platform integrated with deep learning algorithms for the identification and quantification of gaseous emissions in gas flares. The project, spearheaded by Omega Optics, Inc., aimed to address environmental monitoring challenges by leveraging advanced photonic technologies and autonomous UAV operations. The research focused on designing, optimizing, and fabricating photonic crystal waveguides and grating couplers to enhance the sensitivity and accuracy of gas detection. A comprehensive drone-based system was developed, featuring a miniaturized sensor, GPS module, and microcontroller communication network for real-time gas concentration monitoring. The system's adaptive sampling algorithm, implemented using the Robot Operating System (ROS), enables autonomous detection and localization of gas emission sources. Preliminary results demonstrate the platform's capability to detect and monitor gas emissions with high precision, cost-effectiveness, and scalability. Future work will expand upon this foundation by introducing 3D wind model-based learning for dynamic environmental conditions and further enhancing the user interface and data processing algorithms to support broader environmental monitoring applications. Overall, this project represents a significant step forward in UAV-based environmental sensing technologies, offering robust solutions for detecting and mitigating the impacts of gaseous emissions on public health and safety.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Site-Selective Modification of Lanthanum Oxychloride to Modulate Halide-Ion Conduction

Design principles for solid-state halide-ion conduction remain poorly defined despite the increasing importance of halide ions as charge carriers in a variety of energy storage and electrochemical computing technologies. Here, we employ a siteselective modification strategy in which aliovalent cations are preferentially introduced at the La 3+ crystallographic site of LaOCl in the 2c Wyckoff position, enabling controlled generation of chloride vacancies and modification of lattice dynamics to enhance chloride-ion conductivity. Aliovalent substitution of La 3+ with Mg 2+ , Ca 2+ , and Sr 2+ generates charge-compensating Cl vacancies while preserving the matlockite crystal structure. X-ray excited optical luminescence measurements with Dy 3+ as a reporter chromophore evidence vacancy-derived midgap electronic states and an extended energy range of radiation-less Auger electron emission corresponding to substantial modification of electronic structure and local electrostatic potentials. Ca alloying at 8−10 at. % increases the chloride-ion conductivity by three- to 4 orders of magnitude as compared to unalloyed LaOCl, whereas comparable amounts of Sr- and Mg-alloying in LaOCl imbue less pronounced conductivity enhancements. Temperature-dependent Raman spectroscopy measurements reveal that Ca- and Sr-alloying substantially soften the La−Cl sublattice and yield a more compliant crystal lattice that can deform to accommodate Cl-ion migration. Structure solutions derived from Rietveld refinements to powder Xray diffraction reveal larger O−La−Cl bond-angle deviations and enhanced out-of-plane cation displacements for Ca- and Sr-alloyed compositions as compared to Mg-alloyed LaOCl. Such local distortions enhance chloride-ion mobility by reshaping and flattening vacancy migration energy landscapes and by modulating lattice dynamics governing anion conduction. We further illustrate that coalloying of Ca with Mg and Sr induces a nonmonotonic conductivity−defect stoichiometry relationship that can be rationalized based on cooperative interactions. Together, these results establish site-selective aliovalent alloying of LaOCl as an effective route to halide-ion solid electrolytes and provide broadly generalizable design principles for site-selective modification to induce vacancy formation and lattice softening to engender facile anion transport

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗