SEARCH · Search NASA

Results for “Open source hardware”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Upgrade of DIII-D radial interferometer–polarimeter for large bandwidth, low noise, and toroidal mode number measurements

Near ion-cyclotron frequency (f ci ) fluctuations, such as those originating from Global and Compressional Alfvén Eigenmodes (GAEs/CAEs), are expected to be present in future fusion reactors but are not well understood due to the limited availability of core measurements in present-day tokamaks. The measurement bandwidth of the Radial Interferometer–Polarimeter (RIP) diagnostic has been upgraded from 1 to 5 MHz to detect these fluctuations in DIII-D. RIP adopts the three-wave technique for simultaneous polarimetric and interferometric measurements. Solid-state microwave sources operating at 650 GHz are used as probe beams and provide 5 MHz bandwidth for both polarimetric and interferometric measurements. Bandwidths of related hardware, including mixer amplifier, signal cable, and digital phase demodulator, are increased correspondingly. Measurement noise is minimized by reducing the time delay between reference and probe signals to nanosecond level and employing correlation-based techniques. Using the upgraded diagnostic, CAE/GAE-like bursting fluctuations are observed in neutral-beam heated plasmas with toroidal magnetic field B φ ≈ 1 T. Current upgrades being undertaken would enable the evaluation of toroidal mode number for these modes. Furthermore, this work opens the possibility of better understanding near ion-cyclotron frequency fluctuations in fusion relevant plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

NuQKD: A Modular Quantum Key Distribution Simulation Framework for Engineering Applications

Abstract An experimental Quantum Key Distribution (QKD) implementation requires advanced costly hardware, unavailable in most research environments, making protocol testing and performance evaluation complicated. This has been a major motivation for the development of QKD simulation frameworks, to allow researchers to obtain insight before proceeding into practical implementations. Several simulators have been introduced over the recent years. However, only four are publicly available, only one of which models equipment imperfections. Currently, no open‐source simulator includes all following capabilities: channel attenuation modelling, equipment imperfections and effects on key rates, estimation of elapsed time during classical and quantum‐ channel processes, use of truly random binary sequences for qubits and measurement bases, shared ‐bit fraction customization. In this paper, we present NuQKD, an open‐ source modular, intuitive simulator, featuring all the above capabilities. NuQKD establishes communication between two computer terminals, accepts custom user inputs (iterations, raw key size, attacker interception rate etc.) and evaluates the sifted key, Quantum Bit Error Rate (QBER), elapsed communication time, and more. NuQKD capabilities include optical fiber and free ‐space simulation, modeling of equipment/channel imperfections, bitstrings from True Random Number Generators, decoy‐state protocol support, and automated evaluation of performance metrics. We expect NuQKD to enable convenient and accurate representation of actual experimental conditions.

Gkouliaras, Konstantinos↗

DOE OSTI2022

Status of the data acquisition, trigger, and slow control systems of the Mu2e experiment at Fermilab

The Mu2e experiment at the Fermilab will search for a coherent neutrinoless conversion of a muon into an electron in the field of an aluminum nucleus with a sensitivity improvement by a factor of 10,000 over existing limits. In this work, the Mu2e Trigger and Data Acquisition System (TDAQ) uses otsdaq framework as the online Data Acquisition System (DAQ) solution. Developed at Fermilab, otsdaq integrates several framework components — an artdaq-based DAQ, an art-based event processing, and an EPICS-based detector control system (DCS), and provides a uniform multi-user interface to its components through a web browser. Data streams from the Mu2e tracker and calorimeter are handled by the artdaq-based DAQ and processed by a one-level software trigger implemented within the art framework. Events accepted by the trigger have their data combined, post-trigger, with the separately read out data from the Mu2e Cosmic Ray Veto system. Foundation of the Mu2e DCS, EPICS – an Experimental Physics and Industrial Control System – is an open-source platform for monitoring, controlling, alarming, and archiving. A prototype of the TDAQ and the DCS systems has been built and tested over the last three years at Fermilab’s Feynman Computing Center, and now the production system installation is underway. This work presents their status and focus on the installation plans and procedures for racks, workstations, network switches, gateway computers, DAQ hardware, slow controls implementation, and testing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

A Data Science and Machine Learning Platform Supporting Large Particle Accelerator Control and Diagnostics Applications Final Report: SBIR Initial Phase II DE-SC0022583

The Machine Learning Data Platform (MLDP) is a product providing full-stack support for data science, Machine Learning, and Artificial Intelligence (ML/AI) applications at particle accelerator and large experimental physics facilities. It supports ML/AI applications from front-end, high-speed acquisition of heterogeneous, time-series data, through data archiving and management, to back-end analysis. The MLDP embodies a “data-science ready” platform for data analysis and ML/AI applications in diagnosis, modelling, control, and optimization of these facilities. It provides data scientists and applications a consistent, datacentric interface to archive data standardizing implementation and deployment of ML/AI algorithms to different operations configurations within the same facility, or between facilities. Being an open-source, public-domain project, the MLDP is intended for broadest possible impact by increasing accessibility and minimizing the required expertise for installation and operation. The MLDP can also be deployed at user facilities for experimental data collection, archiving, and analysis. It is capable of acquisition and archiving of heterogeneous data from experimental equipment (e.g., images, arrays, structures, etc.) along with system hardware configurations (e.g., scalars, tables), control system process variables, and any metadata required for provenance. Thus, the MLDP can manage experimental data through its entire lifecycle, from acquisition and archiving, through analysis and investigation, to release and final publication.

43 PARTICLE ACCELERATORS↗

DOE OSTI2026

Adaptive Computing (AC) (Open Source) [SWR-24-106]

The Adaptive Computing (AC) software stack supports goal-based computing, for which a simulation workload is created on the fly, adapting to the results of calculations. Application-specific code defines an objective, which may be to solve an optimization problem or to train a surrogate model with minimal uncertainty. Then, the AC driver decides where in the design parameter space to run simulations to best achieve that objective. This process is iterative and online; as new data is returned from simulations, the AC driver chooses new simulations to run. The AC driver can strategically run simulations on distributed hardware resources (including high performance computing machines, cloud resources, and edge devices) to maximize throughput and obey resource constraints.

Griffin, Kevin [National Laboratory of the Rockies↗

DOE OSTI2021

Tusas: A fully implicit parallel approach for coupled phase-field equations

In this study, we develop a fully-coupled, fully-implicit approach for phase-field modeling of solidification in metals and alloys. Predictive simulation of solidification in pure metals and metal alloys remains a significant challenge in the field of materials science, as microstructure formation during the solidification process plays a critical role in the properties and performance of the solid material. Our simulation approach consists of a finite element spatial discretization of the fully-coupled nonlinear system of partial differential equations at the microscale, which is treated implicitly in time with a preconditioned Jacobian-free Newton-Krylov method. The approach is algorithmically scalable as well as efficient due to an effective preconditioning strategy based on algebraic multigrid and block factorization. We implement this approach in the open-source Tusas framework, which is a general, flexible tool developed in C++ for solving coupled systems of nonlinear partial differential equations. The performance of our approach is analyzed in terms of algorithmic scalability and efficiency, while the computational performance of Tusas is presented in terms of parallel scalability and efficiency on emerging heterogeneous architectures. We demonstrate that modern algorithms, discretizations, and computational science, and heterogeneous hardware provide a robust route for predictive phase-field simulation of microstructure evolution during additive manufacturing.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2007

Web-Based Real-Time Emergency Monitoring

The Web-based Real-Time Asset Monitoring (RAM) module for emergency operations and facility management enables emergency personnel in federal agencies and local and state governments to monitor and analyze data in the event of a natural disaster or other crisis that threatens a large number of people and property. The software can manage many disparate sources of data within a facility, city, or county. It was developed on industry-standard Geo- Spatial software and is compliant with open GIS standards. RAM View can function as a standalone system, or as an integrated plugin module to Emergency Operations Center (EOC) software suites such as REACT (Real-time Emergency Action Coordination Tool), thus ensuring the widest possible distribution among potential users. RAM has the ability to monitor various data sources, including streaming data. Many disparate systems are included in the initial suite of supported hardware systems, such as mobile GPS units, ambient measurements of temperature, moisture and chemical agents, flow meters, air quality, asset location, and meteorological conditions. RAM View displays real-time data streams such as gauge heights from the U.S. Geological Survey gauging stations, flood crests from the National Weather Service, and meteorological data from numerous sources. Data points are clearly visible on the map interface, and attributes as specified in the user requirements can be viewed and queried.

Harvey, Craig A.↗

DOE OSTI2025

ExaCA v2.0: A versatile, scalable, and performance portable cellular automata application for additive manufacturing solidification

The previously established ExaCA software for performance portable alloy grain structure simulation has been updated to better represent the solidification behavior during complex alloy processing conditions, such as those encountered during metal additive manufacturing (AM), and for improved performance and scalability. Here, an extension to the time–temperature history input data format and the core ExaCA algorithm to include an arbitrary number of melting and solidification events yielded improved prediction of texture for various melt pool geometries, expanding the range of AM-relevant conditions that can be accurately simulated. Improved heat transport process simulation coupling, including the creation of large raster datasets from single track time–temperature history data and in-memory coupling with the new, performance portable finite difference code Finch, were also demonstrated in example studies on the effect of multilayer AM microstructure predictions on hatch spacing and cell size, respectively. Additional new features are detailed and demonstrated, including the ability to perform simulations using various interfacial response function forms, execute simulations on state-of-the-art hardware, improved usability through post-processing versatility, and improved strong and weak scaling performance. The performance, physics, and versatility improvements demonstrated here will further enable large-scale studies on AM process–microstructure relationships that were not previously possible. Furthermore, the usability improvements and ability to run coupled AM process–microstructure simulations using the Finch-ExaCA workflow will facilitate broader use of this open-source software by the computational materials community.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Integration of pH Control into Chi.Bio Reactors and Demonstration with Small-Scale Enzymatic Poly(ethylene terephthalate) Hydrolysis

Small-scale bioreactors that are affordable and accessible would be of major benefit to the research community. In previous work, an open-source, automated bioreactor system was designed to operate up to the 30 mL scale with online optical monitoring, stirring, and temperature control, and this system, dubbed Chi.Bio, is now commercially available at a cost that is typically 1–2 orders of magnitude less than commercial bioreactors. In this work, we further expand the capabilities of the Chi.Bio system by enabling continuous pH monitoring and control through hardware and software modifications. For hardware modifications, we sourced low-cost, commercial pH circuits and made straightforward modifications to the Chi.Bio head plate to enable continuous pH monitoring. For software integration, we introduced closed-loop feedback control of the pH measured inside the Chi.Bio reactors and integrated a pH-control module into the existing Chi.Bio user interface. We demonstrated the utility of pH control through the small-scale depolymerization of the synthetic polyester, poly(ethylene terephthalate) (PET), using a benchmark cutinase enzyme, and compared this to 250 mL bioreactor hydrolysis reactions. The results in terms of PET conversion and rate, measured both by base addition and product release profiles, are statistically equivalent, with the Chi.Bio system allowing for a 20-fold reduction of purified enzyme required relative to the 250 mL bioreactor setup. Through inexpensive modifications, the ability to conduct pH control in Chi.Bio reactors widens the potential slate of biochemical reactions and biological cultivations for study in this system, and may also be adapted for use in other bioreactor platforms.

09 BIOMASS FUELS↗

NASA NTRS2023

Space Networking Implementation for Lunar Operations

The High-Rate Delay Tolerant Networking (HDTN) project at NASA has developed a performance optimized and open-source Delay Tolerant Networking (DTN) implementation. The primary goal is to create a scalable networking solution to increase the scientific data return rate of space missions. To reach this goal, HDTN must span multiple edge cases in space networking by including tools and configurations to accommodate a wide range of space systems. Typically, HDTN evaluations are conducted on a laboratory emulation test bed, made up of hardware accelerated x86 based systems capable of data rates over 10 Gbps. HDTN must have an effective implementation process on a wide range of systems to increase the sustainability of the design. One important implementation option is with low-level embedded systems which could be used on small robotic missions. This paper details the implementation process, benchmark testing, and performance results of HDTN in multiple configurations on Raspberry Pi 4 devices. By implementing HDTN on a Raspberry Pi 4, a process for building HDTN onto ARM processors was developed and utilized to conduct benchmark tests in multiple network configurations, achieving a data rate performance exceeding 600 Mbps. Based on these results, HDTN proved to run on small ARM based systems with slight modifications to the build procedure. These results were then extended to evaluating an implementation of the HDTN software parsed across several Raspberry Pi 4 nodes. To test this capability, HDTN was configured in a simplified cut-through setup and distributed among multiple Raspberry Pi 4 processors. This distributed architecture was benchmark tested in a similar fashion to the testing of a singular HDTN implementation. The results from the benchmark testing are used to examine how these implementation options and capabilities can expand the use cases for DTN, and particularly with small robotic missions.

Space Networking↗

DOE OSTI2026

Towards a Verifiable Domain-Specific Language for Hardware-Accelerated Stencils

Defining a domain-specific language (DSL) that supports vector-calculus abstractions eases the porting of partial differential equation (PDE) solvers to specialized architectures. Sufficiently high-level abstractions empower users to express universal laws with sufficient generality that the laws must always hold true within their domain of validity. A broad class of PDE solvers employs stencil-based algorithms, the target domain of Berkeley Lab's stencil accelerator chip co-design project. First released as open-source in January 2026, the Formal software framework lays a foundation for defining an embedded DSL based on composable operators that implement mimetic numerical methods -- stencil algorithms that guarantee satisfaction of discrete versions of important vector calculus theorems. The Formal DSL will be the frontend to a new class of stencil-PDE accelerators developed jointly by LBNL, UHCL, and UC Berkeley through the DOE Competitive Portfolios for Computer Science Project. This offers the potential of an order of magnitude acceleration for this important category of computational methods to serve the DOE mission. Future work on the Formal DSL will facilitate software verification via type-safe templates that enable problem-specific correctness proofs relying upon generic function theory and carefully crafted unit tests.

Rouson, Damian↗

NASA NTRS2013

Proposed US Contributions to LOFT

Proposed US Enhancements include:Tantalum X -ray collimator, Additional ground station, Large Observatory for X-Ray Timing (LOFT) instrument team participation, US science support center & data archive, and Science enabled by US hardware. High-Z material with excellent stopping power. Fabricated using a combination of laser micromachining and chemical etching. Known technology capable of producing high-aspect ratio holes and large open fractions. Reduces LOFT LAD background by a factor of 3. Telemetry formats for LOFT based upon RXTE/EDS experience. Ground system software and strategies for WFM based upon RXTE/ASM automated pipeline software. MSFC engineering trade studies supporting the Ta collimator. Burst alert triggers based upon Fermi/GBM and HETE-2. Science Enhancements Enabled by US Hardware include: Tantalum collimator: Reduces background by factor of 3. Improves sensitivity to faint sources such as AGN. Eliminates contamination by bright/variable sources. outside the LAD field of view. US Ground Station: Enables continuous telemetry of all events from the WFM. Allows LAD to observe very bright >500 mCrab sources with full event resolution.

Wilson-Hodge, Colleen↗

NASA NTRSDate not supplied

Toward Relating Open- and Closed-Test Section Microphone Phased Array Aeroacoustic Measurements

Aeroacoustic measurements utilizing microphone phased arrays are becoming more commonplace in large-scale wind tunnels. However, for such costly tests it is difficult to assess the influence of a given facility's configuration on the acquired data. One such opportunity has recently arisen in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel, where the High-Lift configuration of the Common Research Model was tested in both open-jet and closed wall configurations. Acoustic data were acquired on the same model with the same specific hardware at the same Mach number; and for similar model angles of attack, array apertures, and array angles relative to the model location. Initial deconvolution comparisons using DAMAS appear poor. The closed test section results show contamination likely due to background noise and reflections. The open-jet results show severe blurring due to the decorrelation of acoustic waves passing through a turbulent free shear layer. However, accounting for image sources in the DAMAS grid reduces visual artifacts in the closed test section results, and a preliminary coherence correction technique mitigates the blurring in the open-jet results. Qualitatively, both tests identify similar source behavior. Quantitatively, summed spectra of the slat noise agree in some frequency bands but differ in others. Proposals that may mitigate the difference are given for each configuration, such as correcting for the array protective cover and applying background subtraction in the closed wall configuration, and further developing the coherence loss correction for deconvolution methods in the open-jet setup.

microphone array↗

DOE OSTI2025

PSCF+: An Extended and Improved Open-Source Software Package for Polymer Self-Consistent Field Calculations

This work introduces PSCF+, a freely available open‑source software tool for modeling how block copolymers self‑assemble into ordered nanoscale structures. The software allows researchers to study a wide range of polymer models and interaction types, making it possible to directly compare theoretical predictions with molecular and simulation‑based studies in a consistent way. PSCF+ incorporates several recently developed numerical methods that significantly reduce computer memory requirements and speed up calculations, enabling efficient use of modern GPU hardware. Here, it also provides automated tools to calculate free‑energy landscapes and phase boundaries, which are essential for understanding and predicting material behavior. Together, these advances make PSCF+ a powerful and flexible platform for studying polymer self‑assembly and support the design of new polymeric materials for scientific and technological applications.

Chemical calculations↗

NASA NTRS2022

Europa Clipper Payload Verification and Validation: Avionics-Instrument Interface Test Campaign

NASA's Europa Clipper mission will investigate Jupiter's icy moon Europa using a payload suite consisting of nine instruments to address a range of scientific objectives concerning Europa's habitability. As the project proceeds past its Critical Design Review, confidence is being built in the system's ability to achieve mission objectives through the implementation of a rigorous payload verification and validation (V&V) program. As part of this payload V&V program, instrument box-level testing was performed by the payload team to verify select instrument-avionics interface requirements. This testing was performed at JPL using the avionics testbed's Bulk Data Storage Emulator (BDSEM) with visiting instrument Test Models. This paper summarizes the Data Link test campaign involving roughly four days of functional testing per instrument, including planning, testing methods, types of issues found, and the requirement closure process. Detail is also provided on the development, deployment, and validation of a standardized analysis tool used in data reviews. This testing verified requirements related to commanding rates, loss of link, packet format, clock counters, loopback test capability, and SpaceWire jitter and skew margins. Additional risk reduction testing of basic commanding, counter behavior, science data collection and transfer, and interface swapping was also performed. Because the BDSEM venue was not originally designed to be a run for record venue, the process of characterizing venue fidelity and establishing suitability for requirement closure using data collected in this venue will also be addressed.In order to close requirements, an extensible tool was developed to post-process instrument command and telemetry data from their original binary to a human-readable format and give visibility to errors detected within the data, such as packets with Cyclic Redundancy Check errors. This tool, called payload-packet-parser, is a Python 3.9 command line tool built using a variety of open-source Python libraries. Payload-packet-parser was designed to support parsing command and telemetry packets for all Europa Clipper instruments and additional analysis tools were developed for verification of specific information interface requirements. This test campaign, including post-processing using a single parsing and verification toolset, allowed for early interface testing, alleviating testing burdens on instrument teams and buying down risk on the instrument-avionics interface by finding hardware and software issues and idiosyncrasies prior to integration with system test venues. Over twenty issues were discovered across the payload, resulting in software updates and instrument rework well in advance of any system impacts. This paper concludes with an assessment of benefits and costs of this type of testing and lessons learned.

Montanez, Leticia↗

DOE OSTI2021

Machine Learning Based Software Package for Reproducible Data Analysis for Electron Microscopy

Advances in hardware and computation technologies are enabling large hyperspectral imaging during Electron Microscopy (EM), resulting in datasets being produced at rapidly increasing spatial and temporal resolutions. This presents exciting opportunities for microstructure analysis, but also poses great challenges in data analysis. Under this STTR program, QuesTek Innovations LLC, a leader in the field of integrated computational materials engineering (ICME), collaborated with Lawrence Livermore National Laboratory and Argonne National Laboratory. The team developed an open-source machine learning (ML) powered tool for EM data analysis of multiple systems and data types, and collected EM data for ML model development using the cutting-edge PicoProbe equipment at Argonne National Laboratory.

Lin, Yu↗

DOE OSTI2025

Summer Internship Report: ARA2 Benchmarking

Over the past decade, the RISC-V Instruction Set Architecture (ISA) has emerged as a significant player in both academic and industrial processor design due to its open-source nature, modular extension system, and versatility across domains ranging from microcontrollers to high-performance computing (HPC). One of its most important recent advancements is the RISC-V Vector Extension (RVV), which enables explicit data-level parallelism through vector registers and vectorized instructions. Unlike traditional SIMD (Single Instruction, Multiple Data) architectures that fix vector lengths at design time, RVV uses the concept of VLEN (vector register length) as a hardware-independent parameter and allows software to adapt dynamically to the available vector width. This flexible approach ensures portability across implementations while enabling scalable performance. The ARA2 core is a parameterizable RISC-V vector processor developed at the Integrated Systems Lab at ETH Zürich and the University of Bologna. Designed as a tightly-coupled accelerator to a scalar RISC-V core, ARA2 implements the RVV 1.0 specification and offers tunable architectural parameters such as the number of vector lanes, VLEN, and cache sizes.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2007

Using Selection Pressure as an Asset to Develop Reusable, Adaptable Software Systems

The Goddard Earth Sciences Data and Information Services Center (GES DISC) at NASA has over the years developed and honed several reusable architectural components for supporting large-scale data centers with a large customer base. These include a processing system (S4PM) and an archive system (S4PA) based upon a workflow engine called the Simple Scalable Script based Science Processor (S4P) and an online data visualization and analysis system (Giovanni). These subsystems are currently reused internally in a variety of combinations to implement customized data management on behalf of instrument science teams and other science investigators. Some of these subsystems (S4P and S4PM) have also been reused by other data centers for operational science processing. Our experience has been that development and utilization of robust interoperable and reusable software systems can actually flourish in environments defined by heterogeneous commodity hardware systems the emphasis on value-added customer service and the continual goal for achieving higher cost efficiencies. The repeated internal reuse that is fostered by such an environment encourages and even forces changes to the software that make it more reusable and adaptable. Allowing and even encouraging such selective pressures to software development has been a key factor In the success of S4P and S4PM which are now available to the open source community under the NASA Open source Agreement

Berrick, Stephen↗