Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operational Flexibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Space transportation booster engine configuration study. Volume 1: Executive Summary

The objective of the Space Transportation Booster Engine (STBE) Configuration Study is to contribute to the Advanced Launch System (ALS) development effort by providing highly reliable, low cost booster engine concepts for both expendable and reusable rocket engines. The objectives of the Space Transportation Booster Engine (STBE) Configuration Study were to identify engine configurations which enhance vehicle performance and provide operational flexibility at low cost, and to explore innovative approaches to the follow-on full-scale development (FSD) phase for the STBE.

Source record↗
NASA NTRS1992

Modified-signed-digit optical computing by using fan-out elements

We present a novel three-step modified-signed-digit optical computing system based on the disrete correlation of space-coded input matrices that are multiply-imaged by using optical fan-out elements. The advantages of our method over other approaches include a larger throughput, more flexible operation, and an easier optical implementation.

Zhou, Shaomin↗
NASA NTRS1992

Journey into tomorrow - Developing nuclear propulsion for the Space Exploration Initiative

Nuclear propulsion, either nuclear thermal propulsion or nuclear electric propulsion, offers the potential of reduced trip times and/or reduced mass into low earth orbit, compared to chemical propulsion systems. In addition, the greater performance benefits of nuclear propulsion can provide the added margin for greater operational flexibility, including mission abort options and increased launch windows. During the 1950s and 1960s experimental and analytical studies showed the feasibility of nuclear propulsion. NASA, in cooperation with other agencies and organizations, is currently planning a technology development program for nuclear propulsion. The overall objective is to develop at least one NTP concept and one NEP concept for piloted and robotic (e.g., cargo) missions to Mars.

Harer, Kathleen F.↗
NASA NTRS1994

The SILEX experiment system operations

The European Space Agency is going to conduct an inter orbit link experiment which will connect a low Earth orbiting satellite and a Geostationary satellite via optical terminals. This experiment has been called SILEX (Semiconductor Inter satellite Link EXperiment). Two payloads will be built. One called PASTEL (PASsager de TELecommunication) will be embarked on the French Earth observation satellite SPOT4. The future European experimental data relay satellite ARTEMIS (Advanced Relay and TEchnology MISsion) will carry the OPALE terminal (Optical PAyload Experiment). The principal characteristic of the mission is a 50 Megabits flow of data transmitted via the optical satellite link. The relay satellite will route the data via its feeder link thus permitting a real time reception in the European region of images taken by the observation satellite. The PASTEL terminal has been designed to cover up to 9 communication sessions per day with an average of 5. The number of daily contact opportunities with the low earth orbiting satellite will be increased and the duration will be much longer than the traditional passes over a ground station. The terminals have an autonomy of 24 hours with respect to ground control. Each terminal will contain its own orbit model and that of its counter terminal for orbit prediction and for precise computation of pointing direction. Due to the very narrow field of view of the communication laser beam, the orbit propagation calculation needs to be done with a very high accuracy. The European Space Agency is responsible for the operation of both terminals. A PASTEL Mission Control System (PMCS) is being developed to control the PASTEL terminal on board SPOT4. The PMCS will interface with the SPOT4 Control Centre for the execution of the PASTEL operations. The PMCS will also interface with the ARTEMIS Mission Control System for the planning and the coordination of the operation. It is the first time that laser technology will be used to support inter-satellite links in Europe. Due to the complexity and experimental character of this new optical technology, the SILEX experiment control facilities will be designed to allow as much operational flexibility as possible.

Demelenne, B.↗
NASA NTRS1999

The Infrared Spectral Imaging Radiometer and Laser Altimeter on STS-85 (an Aircraft Style Experiment Flown in Space)

Improvements in the remote sensing of clouds from space in the future will come from instruments with higher spatial and spectral resolution on more platforms and supported by active sounding. The space shuttle hitchhiker system allows new measurements to be prototyped in space with costs, operating flexibility and data volumes similar to aircraft experiments. The Infrared Spectral Imaging Radiometer and Shuttle Laser Altimeter hitchhiker experiment was flown in 1997. The experiment tested the use of uncooled thermal infrared imaging, laser cloud altitude measurements and high spatial resolution, tri-spectral sensing of cloud particle size and phase. A 1/4 km resolution, fifty orbit data set was obtained from STS-85. The presentation will focus on the use of the shuttle as an experiment platform and cover possible transition to the space station in the future.

Spinhirne, James D.↗
NASA NTRS1999

Design Principles and Methods for Aircraft Gas Turbine Engines

The symposium dealt with design approaches for military aircraft propulsion systems to provide enhanced operational flexibility, longer range, better fuel efficiency and improved affordability. All classes of gas turbines were addressed in nine sessions as follows: Engine Design and Analysis (Part 1) (5 papers); Mechanical Systems (6 papers) Controls (4 papers); Combustors/Augmentors (4 papers); Compressor Systems (Part 1) (5 papers); Compressor Systems (Part 2) (3 papers); Turbines (Part 1) (5 papers); Turbines (Part 2) (4 papers); and Engine Design and Analysis (Part 2) (4 papers). These proceedings also include a Technical Evaluation Report and a Keynote address published in French and English.

Source record↗
NASA NTRS1976

Warm Hands and Feet

Comfort Products, Inc. was responsible for the cold weather glove and thermal boots, adapted from a spacesuit design that kept astronauts warm or cool in the temperature extremes of the Apollo Moon Mission. Gloves and boots are thermally heated. Batteries are worn inside wrist of glove or sealed in sole of skiboot and are rechargeable hundreds of times. They operate flexible resistance circuit which is turned on periodically when wearer wants to be warm.

Source record↗
NASA NTRS2004

Future Concepts for Realtime Data Interfaces for Control Centers

Existing methods of exchanging realtime data between the major control centers in the International Space Station program have resulted in a patchwork of local formats being imposed on each Mission Control Center. This puts the burden on a data customer to comply with the proprietary data formats of each data supplier. This has increased the cost and complexity for each participant, limited access to mission data and hampered the development of efficient and flexible operations concepts. Ideally, a universal format should be promoted in the industry to prevent the unnecessary burden of each center processing a different data format standard for every external interface with another center. With the broad acceptance of XML and other conventions used in other industries, it is now time for the Aerospace industry to fully engage and establish such a standard. This paper will briefly consider the components that would be required by such a standard (XML schema, data dictionaries, etc.) in order to accomplish the goal of a universal low-cost interface, and acquire broad industry acceptance. We will then examine current approaches being developed by standards bodies and other groups. The current state of CCSDS panel work will be reviewed, with a survey of the degree of industry acceptance. Other widely accepted commercial approaches will be considered, sometimes complimentary to the standards work, but sometimes not. The question is whether de facto industry standards are in concert with, or in conflict with the direction of the standards bodies. And given that state of affairs, the author will consider whether a new program establishing its Mission Control Center should implement a data interface based on those standards. The author proposes that broad industry support to unify the various efforts will enable collaboration between control centers and space programs to a wider degree than is currently available. This will reduce the cost for programs to provide realtime access to their data, hence reducing the cost of access to space, and benefiting the industry as a whole.

Kearney, Mike W., III↗
NASA NTRS2004

Libration Point Navigation Concepts Supporting Exploration Vision

Farquhar described several libration point navigation concepts that would appear to support NASA s current exploration vision. One concept is a Lunar Relay Satellite operating in the vicinity of Earth-Moon L2, providing Earth-to-lunar far-side and long- range surface-to-surface navigation and communications capability. Reference [ 1] lists several advantages of such a system in comparison to a lunar orbiting relay satellite constellation. Among these are one or two vs. many satellites for coverage, simplified acquisition and tracking due to very low relative motion, much longer contact times, and simpler antenna pointing. An obvious additional advantage of such a system is that uninterrupted links to Earth avoid performing critical maneuvers "in the blind." Another concept described is the use of Earth-Moon L1 for lunar orbit rendezvous, rather than low lunar orbit as was done for Apollo. This rendezvous technique would avoid large plane change and high fuel cost associated with high latitude landing sites and long stay times. Earth-Moon L1 also offers unconstrained launch windows from the lunar surface. Farquhar claims this technique requires only slightly higher fuel cost than low lunar orbit rendezvous for short-stay equatorial landings. Farquhar also describes an Interplanetary Transportation System that would use libration points as terminals for an interplanetary shuttle. This approach would offer increased operational flexibility in terms of launch windows, rendezvous, aborts, etc. in comparison to elliptical orbit transfers. More recently, other works including Folta[3] and Howell[4] have shown that patching together unstable trajectories departing Earth-Moon libration points with stable trajectories approaching planetary libration points may also offer lower overall fuel costs than elliptical orbit transfers. Another concept Farquhar described was a Deep Space Relay at Earth-Moon IA and/or L5 that would serve as a high data rate optical navigation and communications relay satellite. The advantages in comparison to a geosynchronous relay are minimal Earth occultation, distance from large noise sources on Earth, easier pointing due to smaller relative velocity, and a large baseline for interferometry if both L4 and L5 are used.

Carpenter, J. Russell↗
NASA NTRS2003

Relative Navigation Algorithms for Phase 1 of the MMS Formation

This paper evaluates several navigation approaches for the first phase of the Magnetospheric Multiscale (MMS) mission, which consists of a tetrahedral formation of four satellites in highly eccentric Earth orbits of approximately 1.2 by 12 Earth radii at an inclination of 10 degrees. The inter-satellite separation is approximately 10 kilometers near apogees. Navigation approaches were studied using ground station m g e =d two-way Doppler measurements, Global Positioning System (GPS) pseudorange measurements, crosslink range measurements among the members flying in formation, and various combinations of these measurement types. An absolute position accuracy of 10 kilometers or better can be achieved with most of the approaches studied and a relative position accuracy of 100 meters or better can be achieved at apogee in some cases. Among the various approaches studied, the approaches that use a combination of GPS and crosslink measurements were found to be more reliable in terms of absolute and relative navigation accuracies and operational flexibility.

Kelbel, David↗
NASA NTRS1999

Bandwidth Efficient Wireless Digital Modem Developed

NASA Lewis Research Center has developed a digital approach for broadcasting highfidelity audio (nearly compact disk (CD) quality sound) in the commercial frequencymodulated (FM) broadcast band. This digital approach provides a means of achieving high data transmission rates with low hardware complexity--including low mass, size, and power consumption. Lewis has completed the design and prototype development of a bandwidth-efficient digital modem (modulator and demodulator) that uses a spectrally efficient modulation scheme: 16-ary rectangular quadrature amplitude modulation, or 16- ary QAM. The digital implementation is based strictly on inexpensive, commercial off-theshelf digital signal processing (DSP) hardware to perform up and down conversions and pulse shaping. The digital modem transmits data at rates up to 76 kilobits per second (kbps), which is almost 3 times faster than standard 28.8-kbps telephone modems. In addition, the modem offers improved power and spectral performance, flexible operation, and low-cost implementation.

Kifle, Muli↗
NASA NTRS2004

International Space Station (ISS) Airlock Crewlock Depressurization Methods

The International Space Station (ISS) Airlock Crewlock can be depressurized via various methods. The ISS Airlock is divided into two major sections, the Equipment Lock and Crewlock. The Equipment Lock, as the name indicates, contains the equipment to support EVA activities including Extravehicular Maneuvering/Mobility Unit (EMU) maintenance and refurbishment. The Equipment Lock also contains basic life support equipment in order to support denitrogenzation protocols while the Airlock is isolated from the rest of the ISS. The Crewlock is the section of the Airlock that is depressurized to allow for Extravehicular Activity (EVA) crewmembers to exit the ISS for performance of EVAs. As opposed to the Equipment Lock, the Crewlock is quite simple and basically just contains lights and an assembly to provide services, oxygen, coolant, etc, to the EMUs. For operational flexibility, various methods were derived for Crewlock depressurization. Herein these various different methods of ISS Airlock Crewlock depressurization will be described including their performance, impacts, and risks associated with each method. Each of the different methods will be discussed with flight data, if it exists. Models will be applied to flight cases and to other methods that have not been used on-orbit at this time.

Williams, David E.↗
NASA NTRS2005

Discovering the Regulatory Considerations of the Federal Aviation Administration: Interviewing the Aviation Rulemaking Advisory Committee

Maintenance Resource Management (MRM) training for aviation mechanics has become mandatory in many industrialized countries since 1998. Yet, to date, MRM training remains optional in the U.S. Interestingly, a similar safety discipline, namely Crew/Cockpit Resource Management (CRM), is mandatory for pilots, flight engineers, flight attendants, and dispatchers and is regulated in the Federal Aviation Administration s (FAA) Federal Aviation Regulations (FARs). If MRM training is important to enhance aviation technicians working behavior, the rationale to not regulate it opens a window for study. This research aims to inductively investigate the FAA s regulatory rationale concerning MRM training based on direct inputs from the FAA s Aviation Rulemaking Advisory Committee (ARAC) members. Delphi methodology associated with purposive sampling technique was adopted. The result revealed that the FAA cannot regulate MRM because the aviation industry is strongly opposed to it due to the lack of training budgets, the need of a quantifiable cost-effect analysis, concern over the FAA s inspection workforce, an ongoing voluntary alternative called the Air Transportation Surveillance System (ATOS), the government s lower priority on maintenance after 9/11, and the airlines tight embracement of operational flexibility without regulation.

Lu, Chien-tsung↗
NASA NTRS2002

Limbed Excursion Mechanical Utility Rover: LEMUR II

The assembly inspection, and maintenance requirements of permanent installations in space demand robotic agents that provide a high level of operational flexibility relative to the mass and volume of the robotic system.

robot limb manipulation robot vision↗
NASA NTRS2006

Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

scheduling↗
NASA NTRS2007

Hybrid Power Management (HPM)

The NASA Glenn Research Center s Avionics, Power and Communications Branch of the Engineering and Systems Division initiated the Hybrid Power Management (HPM) Program for the GRC Technology Transfer and Partnership Office. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The advanced power devices include ultracapacitors and fuel cells. HPM has extremely wide potential. Applications include power generation, transportation systems, biotechnology systems, and space power systems. HPM has the potential to significantly alleviate global energy concerns, improve the environment, and stimulate the economy. One of the unique power devices being utilized by HPM for energy storage is the ultracapacitor. An ultracapacitor is an electrochemical energy storage device, which has extremely high volumetric capacitance energy due to high surface area electrodes, and very small electrode separation. Ultracapacitors are a reliable, long life, maintenance free, energy storage system. This flexible operating system can be applied to all power systems to significantly improve system efficiency, reliability, and performance. There are many existing and conceptual applications of HPM.

Eichenberg, Dennis J.↗
NASA NTRS2007

Status of Magnetohydrodynamic Augmented Propulsion Experiment

Over the past several years, efforts have been under way to design and develop an operationally flexible research facility for investigating the use of cross-field MHD accelerators as a potential thrust augmentation device for thermal propulsion systems, The baseline configuration for this high-power experimental facility utilizes a 1,5-MW, multi-gas arc-heater as a thermal driver for a 2-MW, MHD accelerator, which resides in a large-bore 2-tesla electromagnet. A preliminary design study using NaK seeded nitrogen as the working fluid led to an externally diagonalized segmented MHD channel configuration based on an expendable beat-sink design concept. The current status report includes a review of engineering/design work and performance optimization analyses and summarizes component hardware fabrication and development efforts, preliminary testing results, and recent progress toward full-up assembly and testing

Litchford, Ron J.↗
NASA NTRS2005

Abort Options for Human Lunar Missions between Earth Orbit and Lunar Vicinity

Apollo mission design emphasized operational flexibility that supported premature return to Earth. However, that design was tailored to use expendable hardware for short expeditions to low-latitude sites and cannot be applied directly to an evolutionary program requiring long stay times at arbitrary sites. This work establishes abort performanc e requirements for representative onorbit phases of missions involvin g rendezvous in lunar-orbit, lunar-surface and at the Earth-Moon libr ation point. This study submits reference abort delta-V requirements and other Earth return data (e.g., entry speed, flight path angle) and also examines the effect of abort performance requirements on propul sive capability for selected vehicle configurations.

Condon, Gerald L.↗