Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

NASA's Near Earth Asteroid Scout Mission

NASA is developing solar sail propulsion for a near-term Near Earth Asteroid (NEA) reconnaissance mission and laying the groundwork for their future use in deep space science and exploration missions. The NEA Scout mission, funded by NASA's Advanced Exploration Systems Program and managed by NASA MSFC, will use the sail as primary propulsion allowing it to survey and image one or more NEA's of interest for possible future human exploration. NEA Scout uses a 6U cubesat (to be provided by NASA's Jet Propulsion Laboratory), an 86 m2 solar sail and will weigh less than 14 kilograms. The solar sail for NEA Scout will be based on the technology developed and flown by the NASA NanoSail-D and The Planetary Society's Lightsail-A. Four ~7 m stainless steel booms wrapped on two spools (two overlapping booms per spool) will be motor deployed and pull the sail from its stowed volume. The sail material is an aluminized polyimide approximately 3 microns thick. NEA Scout will launch on the Space Launch System (SLS) first mission in 2018 and deploy from the SLS after the Orion spacecraft is separated from the SLS upper stage. The NEA Scout spacecraft will stabilize its orientation after ejection using an onboard cold-gas thruster system. The same system provides the vehicle Delta-V sufficient for a lunar flyby. After its first encounter with the moon, the 86 m2 sail will deploy, and the sail characterization phase will begin. A mechanical Active Mass Translation (AMT) system, combined with the remaining ACS propellant, will be used for sail momentum management. Once the system is checked out, the spacecraft will perform a series of lunar flybys until it achieves optimum departure trajectory to the target asteroid. The spacecraft will then begin its two year-long cruise. About one month before the asteroid flyby, NEA Scout will pause to search for the target and start its approach phase using a combination of radio tracking and optical navigation. The solar sail will provide continuous low thrust to enable a relatively slow flyby of the target asteroid under lighting conditions favorable to geological imaging. Once complete, NASA will have demonstrated the capability to fly low-cost, high Delta-V cubesats to perform interplanetary missions.

Johnson, Les↗
NASA NTRS2016

Aerocapture Design Study for a Titan Polar Orbiter

In 2014 a team at NASA Goddard Space Flight Center (GSFC) studied the feasibility of using active aerocapture to reduce the chemical Delta V requirements for inserting a small scientific satellite into Titan polar orbit. The scientific goals of the mission would be multi-spectral imaging and active radar mapping of Titan's surface and subsurface. The study objectives were to: (i) identify and select from launch window opportunities and refine the trajectory to Titan; (ii) study the aerocapture flight path and refine the entry corridor; (iii) design a carrier spacecraft and systems architecture; (iv) develop a scientific and engineering plan for the orbital portion of the mission. Study results include: (i) a launch in October 2021 on an Atlas V vehicle, using gravity assists from Earth and Venus to arrive at Titan in January 2031; (ii) initial aerocapture via an 8-km wide entry corridor to reach an initial 350X6000 km orbit, followed by aerobraking to reach a 350X1500 km orbit, and a periapse raise maneuver to reach a final 1500 km circular orbit; (iii) a three-part spacecraft system consisting of a cruise stage, radiator module, and orbiter inside a heat shield; (iv) a 22-month mission including station keeping to prevent orbital decay due to Saturn perturbations, with 240 Gb of compressed data returned. High-level issues identified include: (i) downlink capability - realistic downlink rates preclude the desired multi-spectral, global coverage of Titan's surface; (ii) power - demise of the NASA ASRG (Advanced Stirling Radioisotope Generator) program, and limited availability at present of MMRTGs (Multi-Mission Radioisotope Generators) needed for competed outer planet missions; (iii) thermal - external radiators must be carried to remove 4 kW of waste heat from MMRTGs inside the aeroshell, requiring heat pipes that pass through the aeroshell lid, compromising shielding ability; (iv) optical navigation to reach the entry corridor; (v) the NASA requirement of continuous critical event coverage for the orbiter, especially during the peak heating of the aerocapture when the radio link will be broken. In conclusion, although Titan aerocapture allows for considerable savings in propellant mass, this comes at a cost of increased mission complexity. Further architecture study and refinement is required to reduce high-level mission risks and to elucidate the optimum architecture.

Nixon, Conor A.↗
NASA NTRS2017

Orbit Determination Strategy and Simulation Performance for OSIRIS-REx Proximity Operations

The Origins Spectral Interpretation Resource Identification Security Regolith Explorer (OSIRISREx)is a NASA New Frontiers mission to the near-earth asteroid Bennu that will rendez vousin 2018, create a comprehensive and detailed set of observations over several years, collect a regolith sample, and return the sample to Earth in 2023. The Orbit Determination (OD) team isa sub-section of the Flight Dynamics System responsible for generating precise reconstructions and predictions of the spacecraft trajectory. The OD team processes radiometric data, LIDAR, as well as center-finding and landmark-based Optical Navigation images throughout the proximity operations phase to estimate and predict the spacecraft location within several meters. Stringent knowledge requirements stress the OD teams concept of operations and procedures to produce verified and consistent high quality solutions for observation planning, maneuver planning, and onboard sequencing. This paper will provide insight into the OD concept of operations and summarize the OD performance expected during the approach and early proximity operation phases,based on our pre-encounter knowledge of Bennu. Strategies and methods used to compare and evaluate predicted and reconstructed solutions are detailed. The use of high fidelity operational tests during early 2017 will stress the teams concept of operations and ability to produce precise OD solutions with minimal turn-around delay.

Leonard, Jason M.↗
NASA NTRS2018

Dawn Mission's Search for Satellites of Ceres: Intact Protoplanets Don't Have Satellites

Upon its approach to orbit the dwarf planet Ceres in early 2015, optical navigation and dedicated satellite search images were acquired with the Dawn mission's framing camera 2. A team of searchers individually processed and examined the images for evidence of objects moving with Ceres. Completeness of search with respect to the space searched was calculated as a function of distance to Ceres and found to be complete down to 15 Ceres radii (Ceres' mean radius is 470 kilometers). Upper limits of detectable magnitude were determined for each observed set of images and an upper limit in size was calculated assuming for the putative objects, Ceres' geometric albedo of 0.11. Nothing was found associated with Ceres down to a radius of 12 meters for the most sensitive search, and down to a radius of 323m for the least sensitive search circumstances. Examination of the physical properties of the 41 largest and most massive main belt asteroids suggests that large asteroids without satellites are intact and their interiors have internal strength. This is consistent with results from the Dawn mission at both Vesta and Ceres. Ceres' volatile-rich composition also is a likely contributor to both the absence of satellites at Ceres and of Ceres meteorites at Earth. These results suggest that collisional disruption creating rubble pile structure is a necessary condition for formation of satellites around main belt asteroids.

McFadden, Lucy A.↗
NASA NTRS2019

Near Earth Asteroid Scout: Exploring Asteroid 1991VG Using A Smallsat

After its deployment from NASA’s Space Launch System (SLS) in 2020, the Near Earth Asteroid (NEA) Scout mission will image an asteroid on a close flyby using an 86m2 solar sail as its primary propulsion. NEA Scout, with a 6U CubeSat form factor, is one of several secondary CubeSat payloads to be deployed from the SLS on its maiden flight. The NEA Scout will be ejected from the SLS on a trajectory toward the moon and will use its onboard cold gas propulsion system to attain an elliptical lunar orbit. Once the spacecraft is in orbit, the solar sail will deploy and spacecraft checkout will begin. The NEA Scout will remain in the lunar vicinity until the low-thrust trajectory to the destination asteroid, 1991VG, or another NEA of interest, can be attained. The spacecraft will then begin its 2.0 – 2.5 year journey to the asteroid. About one month before the asteroid flyby, NEA Scout will search for the target and start its Approach Phase, using a combination of radio tracking and optical navigation. The solar sail will provide continuous low thrust to enable a relatively slow flyby (10-20 m/s) of the target asteroid under lighting conditions favorable to geological imaging (<50 degree phase angle). Once the flyby is complete, and if the system is still fully functioning, an extended mission will be considered – the reconnaissance of another asteroid or a re-flyby of the first asteroid several months later are both options. NEA Scout is funded by the NASA Human Exploration and Operations Mission Directorate.

In-Space Propulsion↗
NASA NTRS2020

Irradiation-energy Dependence on the Spectral Changes of Hydrous C-Type Asteroids Based on 4kev and 20kev He Exposure Experiments of Murchison Cm Chondrite

C-type asteroid 162173 Ryugu was observed by remote sensing apparatus onboard Hayabusa2 spacecraft and found to be very dark object whose reflectance is (1.60 ± 0.15) % at 0.55μm and showed a small 2.7μm absorption band indicative of phyllosilicates. The optical navigation camera detected color variations of Ryugu’s surface in the wavelength range from 0.4 to 0.95μm: Bluer spectra are ob-served at both poles and on the equatorial ridge, both of which are topographic highs and thus may be fresh material exposed by gradual erosion. On the other hand, many locations at middle-latitude areas exhibit redder and darker colors. Similar color variations are also detected in the near-infrared wavelength range. These observations suggest that a surface-correlated process is responsible for the color variation, most prob-ably from blue to red, but the mechanism for the change is not yet identified. Space weathering is one possible mechanism responsible for the color variation, but the spectral changes of C-type asteroids from space weathering are far from being fully understood. Past experimental studies using hydrous carbonaceous chondrites such as Murchison and Tagish Lake show that He exposure (simulating solar wind irradiation) changes spectra to bluer and brighter. Recently our He exposure experiments indicate that spectral changes depend on physical properties such as porosity of exposed material. In this study, we per-formed further He exposure experiments using Murchison CM chondrite in order to understand energy dependence on the spectral changes. We found that He energy is a critical parameter, as well as physical properties of the samples, that affects spectral changes of space weathering of hydrated C-type asteroids.

Nakamura, T.↗
NASA NTRSDate not supplied

Reflectance spectra measurement plan of captured samples from Ryugu: current status

Hayabusa2 spacecraft is equipped with Optical Navigation Camera (ONC) andNear-infrared Spectrometer (NIRS3), and has obtained reflectance spectra of the C-type near-Earth asteroid Ryugu over a wavelength range of 0.40–0.95 μm and 1.8–3.2 μm, respectively. It was revealed that Ryugu exhibits globally very low albedo (less than 0.02 at 0.55 and 2.0 μm), a slightly positive spectral slope, and an ubiquitous weak but sharp OH absorption band centered at 2.72 μm,showing a little regional heterogeneities. Thus, the surface material of Ryugu can be estimated as relatively similar to moderately heated carbonaceous chondrites, e.g., moderately dehydrated CI and CM, and enriched in carbon (Kitazato et al., 2019; Sugita et al., 2019; Tatsumi et al., 2020).Hayabusa2 successfully has performed twice touch down operations, and the captured sample will be brought back to the Earth in late 2020 (Morota et al., 2020; Tachibana et al., in preparation). To clarify Ryugu’s mineralogical and physicochemical properties and their varieties, effective for spectral characteristics obtained by ONC and NIRS3, several grains are planned to be distributed to several primary analysis groups. In this study, we report the current status of our spectral analysis plan in Hayabusa2 MINeralogy and PETrology of coarse grains (MIN-PET CG) team led by T. Nakamura, and the latest rehearsal analysis result using carbonaceous chondrite samples. MIN-PET CG rehearsal measurements have been performed to obtain detailed spectral properties of Ryugu grains with diverse spatial resolutions ranging from μm to mm scale or larger; using a few mm size polished CM sample with several microscopic imaging spectrometers covering various spatial range; with 200 μmor finer spatial resolution at Institut d’Astrophysique Spatiale, ~50 and 150 μm spatial resolution invisible and IR ranges at Brown University, and with 40 μm or larger spatial resolution at Tohoku University, and using mm-size CM and CI grains with a diffuse reflectance spectrometer with a few mm resolution at Tohoku University. Diffuse reflectance spectroscopy measurements undergo to use several mm-size CM or CI chondrite grains with Bruker VERTEX 70v, which covers ~0.38–15 μm in wavelength. To keep returned samples out of atmosphere avoiding any terrestrial contamination, wehave prepared an air shutoff cell to put samples and standard materials together kept in a N2 purged condition (Amano et al., 2020). Samples are Murchison CM chondrite showing typically ~5%reflectance with a strong OH absorption band at ~2.8 μm, and laboratory heated CI chondrite showing~3% reflectance, and a weak OH absorption band at ~2.7 μm. We will perform (1) fixed angle condition as laboratory standard setting at incident, emission, and phase angles of 30°, 0°, 30°, or 0°,30°, 30°, and (2) various angle conditions for photometric corrections. Future lab analyses of samples returned from Ryugu will provide direct and detailed information on the mineralogical and physicochemical properties of Ryugu, and relationship of spectral characteristics obtained by remote sensing and laboratory instruments.

M. Matsuoka↗
NASA NTRSDate not supplied

The Comet Astrobiology Exploration Sample Return (CAESAR) Mission

The Comet Astrobiology Exploration Sample Return (CAESAR) mission will acquire and return to Earth for laboratory analysis a minimum of 80 grams of surface material from the nucleus of comet 67P/Chur-yumov-Gerasimenko (67P). CAESAR will characterize the surface region sampled, preserve the collected sample in a pristine state, and return evolved volatiles by capturing them in a separate gas reservoir. NASA Goddard Space Flight Center provides project management, systems engineering, safety and mission assurance, contamination control, mission operations, and many other important functions. Northrop Grumman Space Systems will build the spacecraft, based on Dawn mission heritage, which like CAESAR, uses solar electric propulsion. CAESAR was selected by for Phase A study in the New Frontiers 4 Competition and will be proposed to New Frontiers 5.Collection of a sample from the surface of comet 67P is facilitated by a set of cameras that together provide images to support sample site selection, perform optical navigation, and document the sample before, during, and after col-lection. The sample is collected at the end of an arm during a 5-second touch-and-go (TAG) maneuver with the Sample Acquisition System (SAS)designed by Honeybee Robotics for the surface properties of comet 67P observed by the Rosetta mission. After sample collection, and while the sample is still cold (< -80°C), the TAG Arm inserts the sample container into the Sample Containment System (SCS) mounted inside the Sample Return Capsule (SRC). The SCS is sealed, preventing the sample from escaping into space. The sample is slowly warmed inside the SCS to enable sublimation of volatiles, which are collected in the Gas Containment System (GCS), a passively cooled gas reservoir. Separating the volatiles from the solid sample protects the solid sample from alteration. Once all sublimated H2O is transferred to the GCS, the GCS is sealed to capture the volatile sit contains, and the SCS is vented to space to maintain the solid sample under vacuum. The SCS vent is closed before Earth entry to prevent atmospheric contamination. Detailed laboratory analyses of the sample from 67P will trace the history of volatile reservoirs, delineate the chemical pathways that led from simple interstellar species to complex molecules, constrain the evolution of the comet, and evaluate the role of comets in delivering water and prebiotic organics to the early Earth. CAESAR will achieve these goals by carrying out coordinated sample analyses that will link macroscopic properties of the comet with microscale mineralogy, chemistry, and isotopic studies of volatiles and solids. Most of the sample (≥75%) will be set aside for analyses by generations of scientists using continually advancing tools and methods, yielding an enduring scientific treasure that only sample return can provide. This presentation will review development conducted during NF4 Phase A and discuss the NF5 mission concept.

A G Hayes↗
NASA NTRS1997

Deep Space One: NASA's First Deep-Space Technology Validation Mission

Under development for launch in July 1998, Deep Space One (DS1) is the first flight of NASA's New Millennium Program, Chartered to validate selected technologies required for future low-cost space science programs. Advanced technologies chosen for validation on DS1 include solar electric propulsion, high-power solar concentrator arrays, autonomous on-board optical navigation, two low-mass science instrument packages, and several telecommunications and microelectronics devices.

Deep↗
NASA NTRS2017

Precision Asteroid Astrometry

Among the methods used to guide spacecraft to their destinations, Optical Navigation (OpNav) remains an effective option. OpNav makes use of star fields and small body ephemerides to precisely locate spacecraft. To facilitate accurate OpNav, the small body ephemerides must be constantly updated; asteroid orbits accumulate errors each year of a few milliarcseconds. Through extended exposures, taken with strategic offsets, a least-squares solution can be found that determines updated ephemeris data. This updated data can also be used by occultation astronomers to gain further information about the small bodies, including their size and shape. Using the 24-inch telescope at the Caltech Table Mountain Observatory (TMO), we capture two or more 180 second exposures of each target. These images, combined with a file for the predicted background star field and two reference files, are then processed through a series of scripts and programs. Starting with a prediction file and two to five exposures of the asteroid, the data is processed. This original data is about 32MB per observation. Once the data are reduced to only Right Ascension and Declination for each target, the data are ready for delivery. This consists of text only, and for each target takes about 80 bytes; this resulting data reduction is about five orders of magnitude. This method produces observed positions that are refined by about 12 milliarcseconds, a refinement that is accomplished almost nowhere else. The occultation observations that are facilitated by the ephemerides being refined also produce results that are not possible in any other way from ground-based observations.

Dial, Jason↗
NASA NTRSDate not supplied

Impact histories inferred from exogenic boulders on asteroids Ryugu and Bennu

Rubble-pile asteroids, such as (162173) Ryugu and (101955) Bennu, are formed as a result of catastrophic disruption of a parent body and re-accumulation of the fragments by self-gravity. Therefore, reaccumulated rubble piles could include mixtures of materials from both the parent body and its catastrophic impactor, as they did in the case of 2008 TC3 and the Almahata Sitta meteorites (Jenniskens et al. 2009). Indeed, six unusually bright, basaltic, meter-scale boulders were recently identified on Bennu’s dark surface (DellaGiustina et al. 2021), and their close spectral matches to the Howardite-Eucrite-Diogenite (HED) meteorites and Vesta family members indicate that they originated from asteroid (4) Vesta. In parallel, bright exogenic anhydrous-silicate–rich materials were found on Ryugu (Tatsumi et al. 2021). The bright boulders on Ryugu are consistent with ordinary chondrite meteorites, based on their albedo and weak or even absent absorption band at 2 µm. These exogenous materials on the surfaces of rubble-pile asteroids could be a key to constraining their specific impact conditions and collisional evolution. In this study, we report further study of the visible spectrophotometry and morphology of exogenic boulders on Ryugu and Bennu using two multi-band cameras: the telescopic Optical Navigation Camera (ONC-T) onboard the Hayabusa2 spacecraft, and MapCam onboard the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft, respectively. For Ryugu, we first detected objects with peak reflectance brighter by a factor of >1.5 than the surrounding area. Tatsumi et al. (2021) found two spectral groups among the bright boulders: S-type with an absorption near 1 µm and C/X-type with a flat spectrum. That study found 6 S-types and 15 C/X-types, and in this work we additionally find one S-type and ~70 C/X-types. We found that S-type bright boulders follow two parallel trends consistent with space weathering of ordinary chondrites. Fragments from projectiles suggest that Ryugu may not have formed directly from the original parent body, i.e., it is from a second or higher generation of collisional descendants (Sugimoto et al. in revision). For Bennu, we directly surveyed absorption near 1 µm, which is indicative of anhydrous silicates. We propose 77 objects of exogenic origin including 6 boulders previously reported by DellaGiustina et al. (2021). We find that proposed exogenic objects follow two mixing trends with respect to the average spectrum of Bennu (Tatsumi and Popescu et al. submitted). One trend can be explained by mixing with HED as discussed in DellaGiustina et al. (2021), and the other trend can be explained by mixing with another, olivine-rich composition. Near-infrared spectra also support the possibility of multiple compositions among exogenic objects on Bennu. Thus, similar to Ryugu, Bennu could represent a second or higher generation. Using high-resolution images, we found that more than half of the exogenic objects that we identified on Bennu have breccia-like or inclusion-like morphologies. We do not observe a correlation between morphology and spectral shape. Direct comparison of reflectance spectra of exogenic object spectra between Ryugu and Bennu suggests a compositional difference. Furthermore, the number density of exogenic objects > 0.5 m on Bennu is ~40 times that on Ryugu (Tatsumi and Popescu et al. submitted). Bennu exhibits much more contamination from exogenic materials than Ryugu, which likely reflects differences in impact conditions, such as impact velocity and impactor size.

E. Tatsumi↗
NASA NTRS2019

The HST Lightcurve of (486958) 2014 MU69

We report Hubble Space Telescope (HST) lightcurve observations of the New Horizons spacecraft encounter Kuiper Belt object (KBO) (486958) 2014 MU69 acquired near opposition in July 2017. In order to plan the optimum flyby sequence the New Horizons mission planners needed to learn as much as possible about the target in advance of the encounter. Specifically, from lightcurve data, encounter timing could be adjusted to accommodate a highly elongated, binary, or rapidly rotating target. HST astrometric (Porter et al., 2018) and stellar occultation (Buie et al., 2018) observations constrained MU69's orbit and diameter (21–41 km for an albedo of 0.15–0.04), respectively. Photometry from the astrometric dataset suggested a variability of ≥0.3 mags, but they did not determine the period or provide shape information. To that end we strategically spaced 24 HST orbits over 9 days to investigate rotation periods from approximately 2–100 h and to better constrain the lightcurve amplitude. Until New Horizons detected MU69 in its optical navigation images beginning in August 2018, this HST lightcurve campaign provided the most accurate photometry to date. The mean variation in our data is 0.15 magnitudes which suggests that MU69 is either nearly spherical (a:b axis ratio of 1:1.15), or its pole vector is pointed near the line of sight to Earth; this interpretation does not preclude a near-contact binary or bi-lobed object. However, image stacks do conclude that MU69 does not have a binary companion ≥2000 km with a sensitivity to 29th magnitude (an object a few km in size for an albedo of 0.04–0.15). Our data are not of sufficient signal to noise to uniquely determine the period or amplitude, however, they did provide the necessary information for spacecraft planning. We report with confidence that MU69 is not both rapidly rotating and highly elongated (which we define as a lightcurve amplitude ≥ 0.5 magnitude). Since this paper is being published post fly-by, we note that our results are consistent with the fly-by imagery and orientation of MU69 (Stern et al., 2019). The combined dataset also suggests that within the KBO lightcurve literature there are likely other objects which share a geometric configuration like MU69 resulting in an underestimate of the contact binary fraction for the Cold Classical Kuiper Belt.

S D Benecchi↗
NASA NTRSDate not supplied

Near Earth Asteroid Scout - Mission Update

After its deployment from NASA’s Space Launch System (SLS), the Near-Earth Asteroid (NEA) Scout mission will travel to and image an asteroid during a close flyby using an 86m^2 solar sail as its primary propulsion. Solar sails are large, mirror-like structures made of a lightweight material that reflects sunlight to propel the spacecraft. The continuous solar photon pressure provides thrust with no need for the heavy, expendable propellants used by conventional chemical and electric propulsion systems. Developed by NASA’s Marshall Space Flight Center (MSFC) and Jet Propulsion Laboratory (JPL), the NEA Scout is based on the industry-standard CubeSat form factor. The spacecraft measures 11 cm x 24 cm x 36 cm and weighs less than 14 kilograms. Following deployment from the Space Launch System (SLS), the solar sail will deploy, and the spacecraft will begin its 2.0 – 2.5-year journey. About one month before the asteroid flyby, NEA Scout will search for the target and start its Approach Phase using a combination of radio tracking and optical navigation and perform a relatively slow flyby (10-20 m/s) of the target. A summary of the mission, sailcraft, mission design, and its first several months of deep space operation will be described.

Near Earth Asteroid↗
NASA NTRS2022

Preparations for the Launch, Cruise, and Orbital Operations Phases of the Psyche Mission

“Psyche: Journey to a Metal World” was selected in 2017 as the 14th mission in NASA’s Discovery program. The mission uses an electric propulsion (EP) system to rendezvous with and orbit the large metal asteroid (16) Psyche. Spacecraft development is a hybrid approach with deep-space avionics provided by the Jet Propulsion Laboratory (JPL) and a solar electric propulsion chassis based on Maxar’s 1300-series GEO communications satellites. The payload suite is comprised of a magnetometer, multispectral imager, and gamma ray & neutron spectrometer science instruments and the Deep Space Optical Communications advanced technology demonstration.The spacecraft is currently in the final integration and test phase to support a planned launch period open in August 2022. With under a year until liftoff, final pre-liftoff preparations are underway for the mission’s major in-flight Phases. The Launch Phase is the mission’s only critical event as the vehicle autonomously deploys the solar arrays and delivers the spacecraft to a safe state. Following a planned 70-day Initial Checkout Phase, the spacecraft thrusts with the EP system through the majority of a 3.5-year Cruise Phase, which includes a Mars gravity assist, to rendezvous with (16) Psyche. The Approach Phase uses optical navigation while continuing to thrust with the EP engines to deliver the spacecraft into orbit. Orbital Operations are baselined for 20 months as the spacecraft steps through four progressively lower orbital altitudes to study the largest M-type asteroid in the solar system.

Hart, William↗
NASA NTRSDate not supplied

Methods for Analytic Reflected Light Flux modelling in Observing Human Made Space Vehicles

During the Artemis I mission, the Orion Optical Navigation (OpNav) camera was used in a flight test to capture images of the Interim Cryogenic Propulsion Stage (ICPS) at long range. Novel methods in reflectance modelling were developed to estimate the reflected light flux as a function of range to inform the camera settings used to obtain the images. Postflight analysis was performed with the obtained images and telemetry. Techniques were developed using specialized star identification and attitude determination software to localize ICPS and positively identify it. The images were then used to verify the preflight reflected light flux as a function of range prediction and provide insight into the vehicle’s attitude dynamics.

Reflectance↗
NASA NTRS2023

Double Asteroid Redirection Test (DART) Mission

NASA’s Double Asteroid Redirection Test (DART) mission was humanity’s first attempt to move a celestial body, demonstrating the capability to perform a kinetic impact on a planetary defense–relevant sized asteroid. DART was part of the international collaboration known as the Asteroid Impact & Deflection Assessment (AIDA), involving NASA, the European Space Agency (ESA), the Agenzia Spaziale Italiana (ASI), and scientists around the world. DART was a key step to demonstrating preparedness to respond to planetary defense scenarios, and it provides a crucial data point for likely outcomes. Near-Earth objects (NEOs) greater than 140 m in size are of particular interest to planetary defense because they have the potential to cause significant damage if they were to impact Earth, and also because they are difficult to detect, with less than 50% of the predicted population discovered as of 2022 (National Academies Press, 2022). With an appropriately sized spacecraft and enough warning (typically many years to decades), a kinetic impact can slightly alter the orbit of an asteroid in a way that, over time, prevents the asteroid from colliding with Earth in the future. DART’s target was Dimorphos, the smaller (~150-m-diameter) member of the binary asteroid system (65803) Didymos, which is a near-Earth, potentially hazardous, and well-characterized asteroid system. By simply observing changes to the system after impact and comparing them with a pre-impact reference, it was possible to use ground-based telescopes to observe the deflection in the orbit of Dimorphos after impact. Developed and operated by the Johns Hopkins University Applied Physics Laboratory (APL), the mission entered formulation in 2015 after multiple years of concept development. The project was administered according to NPR 7120.5, with technical oversight and funding through the Planetary Missions Program Office (PMPO) at Marshall Space Flight Center (MSFC) and overall support as a directed mission from NASA’s Planetary Defense Coordination Office (PDCO). The DART spacecraft hosted a singular payload, the Didymos Reconnaissance and Asteroid Camera for Optical navigation (DRACO), and a deployable CubeSat contributed by ASI named the Light Italian CubeSat for Imaging of Asteroids (LICIACube). On 11 September 2022, DART deployed LICIACube, which subsequently followed the DART spacecraft at a safe distance and observed the immediate aftermath of the DART impact. DART was designed to autonomously detect, navigate to, and impact Dimorphos. This autonomous design was chosen to maximize the probability of impact, since commanding from the ground could result in course corrections arriving too late. On the day of impact, 26 September 2022, the spacecraft’s autonomous systems successfully detected and locked on to Dimorphos, impacting its surface within 2 m of the center of the illuminated figure (Jensenius et al., 2023). No human intervention was required for a successful impact, demonstrating that humanity possesses the technology to perform a kinetic impact. Within 2 weeks of impact, it was clear that the orbit of Dimorphos had been significantly altered. On 11 October 2022, NASA Administrator Bill Nelson announced that the new orbital period of Dimorphos was shortened by approximately 32 ± 2 min, from 11 h and 55 min before impact to 11 h and 23 min after impact. With additional observations over the following months, the accuracy of this measurement improved to a –33.24 min ± 1.4 s orbital period change (Naidu et al., 2023; Scheirich et al., 2023), and Beta (β), the momentum transfer enhancement parameter, was reported to be 3.6 (Cheng et al., 2023). Subsequent studies examined the details of DART’s impact site, modeled the impact event, investigated the ejecta produced, and analyzed the dynamics of the Didymos system. These combined results clearly demonstrate that the project met all Level 1 mission requirements.

asteroid↗
NASA NTRS2016

Overview of Optical Ground Station 1 of the NASA Space Communications and Navigation Program

Optical Ground Station 1 (OGS1) is the first of a new breed of dedicated ground terminals to support NASA’s developing space-based optical communications infrastructure. It is based at NASA’s Optical Communications Telescope Laboratory (OCTL) at the Table Mountain Observatory near Wrightwood, CA. The system will serve as the primary ground station for NASA’s Laser Communications Relay Demonstration (LCRD) experiment. This paper presents an overview of the OCTL telescope facility, the OGS1 ground-based optical communications systems, and the networking and control infrastructure currently under development. The OGS1 laser safety systems and atmospheric monitoring systems are also briefly described.

Optical Channel↗
NASA NTRS1972

Processing on-board optical data for planetary approach navigation.

The Mariner 9 spacecraft's science television camera provided an optical navigation experiment with TV pictures containing images of Mars' natural satellites against star backgrounds. Required TV image data and spacecraft engineering data were extracted from the spacecraft telemetry stream in this near-real time experiment designed to validate the navigation content of spacecraft-based optical data. This paper discusses the computer programs developed to prepare optical data for use in a navigation filter. Ground and in-flight calibration allowed pointing knowledge of better than 6 arc seconds. System performance during Mars approach was excellent, leading to extremely accurate trajectory estimates. The experiment provides a basis for the design of equivalent systems for future missions.

Acton, C. H., Jr.↗