SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The observed chemical composition of the atmosphere near the Venus cloud tops, the refractive index of cloud particles as deduced from polarization data, and the 3-4-micron reflectivity of the clouds are discussed. The data are shown to be consistent with and to strongly support the possibility that the topmost clouds of Venus are composed of concentrated aqueous HCl solutions.
Remote observations of Venus are reviewed. The strongest inferences of cloud properties can be drawn from polarization data which provide information about cloud particles near 68 km. Particle properties are not as well determined at higher and lower levels. If the clouds are generated photochemically from reduced sulfur species, the supply of O2 may be an important constraint on cloud production. Vapor-pressure data reviewed, and it is shown that deep clouds cannot be H2SO4-H2O aerosols unless the mixing ratios of both H2SO4 and H2O approach 0.001 below 50 km.
Clouds and hazes are commonplace in the atmospheres of solar system planets and are likely ubiquitous in the atmospheres of extrasolar planets as well. Clouds affect every aspect of a planetary atmosphere, from the transport of radiation, to atmospheric chemistry, to dynamics and they influence - if not control - aspects such as surface temperature and habitability. In my presentations I aim to provide an introduction to the role and properties of clouds in exoplanetary atmospheres and will discuss the lessons learned from the past two decades of studying clouds in brown dwarf atmospheres. I will consider the role clouds play in influencing the spectra of extrasolar giant planets and will discuss the relative simple approaches that have been taken so far to model exoplanet clouds. I will also review how the scattering and extinction efficiencies of cloud particles may be approximated in certain limiting cases of small and large particles in order to facilitate physical understanding and will discuss the need for optimized cloud models that can be applied to exoplanet transmission spectra. Finally I will discuss the various sources of aerosol opacity, including photochemistry, disequilibrium chemistry, and equilibrium condensation.
Recent studies indicate that a cloudy atmosphere absorbs more solar radiation than any current 1D or 3D radiation model can predict. The excess absorption is not large, perhaps 10-15 W/sq m or less, but any such systematic bias is of concern since radiative transfer models are assumed to be sufficiently accurate for remote sensing applications and climate modeling. The most natural explanation would be that models do not capture real 3D cloud structure and, as a consequence, their photon path lengths are too short. However, extensive calculations, using increasingly realistic 3D cloud structures, failed to produce photon paths long enough to explain the excess absorption. Other possible explanations have also been unsuccessful so, at this point, conventional models seem to offer no solution to this puzzle. The weakest link in conventional models is the way a size distribution of cloud particles is mathematically handled. Basically, real particles are replaced with a single average particle. This "ensemble assumption" assumes that all particle sizes are well represented in any given elementary volume. But the concentration of larger particles can be so low that this assumption is significantly violated. We show how a different mathematical route, using the concept of a cumulative distribution, avoids the ensemble assumption. The cumulative distribution has jumps, or steps, corresponding to the rarer sizes. These jumps result in an additional term, a kind of Green's function, in the solution of the radiative transfer equation. Solving the cloud radiative transfer equation with the measured particle distributions, described in a cumulative rather than an ensemble fashion, may lead to increased cloud absorption of the magnitude observed.
A cryogenic, 50 liter volume Planetary Cloud Simulation Chamber has been constructed to permit the laboratory study of the cloud compositions which are likely to be found in the atmospheres of the outer planets. On the basis of available data, clouds composed of water ice, carbon dioxide, and liquid and solid ammonia and methane, both pure and in various mixtures, have been generated. Cloud microphysical observations have been permitted through the use of a cloud particle slide injector and photomicrography. Viewports in the lower chamber have enabled the collection of cloud backscattering data using 633 and 838 nm laser light, including linear depolarization ratios and complete Stokes parameterization. The considerable technological difficulties associated with the collection of angular scattering patterns within the chamber, however, could not be completely overcome.
"Micro-CPI" (wherein "CPI" signifies "cloud-particle imager") is the name of a small, lightweight electronic camera that has been proposed for use in research on clouds. It would acquire and digitize high-resolution (3- m-pixel) images of ice particles and water drops at a rate up to 1,000 particles (and/or drops) per second.
Cloud microphysical properties are an important component in climate model parameterizations of water transport, cloud radiative exchange, and latent heat processes. Estimation of effective cloud particle size, liquid or ice water content, and optical depth from satellite-based instrumentation is needed to develop a climatology of cloud microphysical properties and to better understand and model cloud processes in atmospheric circulation. These parameters are estimated from two different surface data sets taken at Coffeyville, Kansas, during the First ISCCP Regional Experiment (FIRE) Phase-2 Intensive Field Observation (IFO) period (November 13 - December 7, 1991). Satellite data can also provide information about optical depth and effective particle size. This paper explores the combination of the FIRE-2 surface and satellite data to determine each of the cloud microphysical properties.
The inner coronal continuum has been observed and measured below 2220 A on the slitless spectra obtained by Speer et al. (1970) at the March 7, 1970 eclipse. These observations set some constraints on the brightness of the inner F corona and hence on the scattering efficiency of the inner interplanetary dust cloud particles in the far ultraviolet. They neither confirm nor reject the possibility that the inner dust cloud has the same sharp upturn in scattering efficiency below 2220 A observed in the zodiacal light and in the interstellar medium.
Limited flight testing of a laser transit velocimeter provided insight into the problems associated with the use of such instruments for flight research. Although the device tested was not designed for flight application, it had certain features such as fiber optics and low laser power which are attractive in the airborne environment. During these tests, operation of the velocimeter was limited by insufficient concentrations of light-scattering particles and background light interference. Normal operation was observed when these conditions were corrected by utilizing cloud particles and flying at night. A comparison between the laser flow velocity measurements and corresponding pressure measurements is presented and shows a coarse correlation. Statistical bias due to turbulence in the flow is suspected to have affected the laser measurements.
Polar stratospheric clouds (PSCs) form at very cold temperatures which typically occur only at high latitudes during local winter. However, meteorological circumstances in the Arctic during late January 1989 led to PSC formation unusually far to the south, at latitudes (near 50 deg N) being sampled during the period by the orbiting SAGE II instrument. These unusual PSC sightings and the evolution of meteorological conditions which produced the episode are described. Profiles of SAGE II extinction measurements at 0.525 and 1.02 microns show clear signatures of PSCs and indicate that the cloud particles were considerably larger than the background aerosol. It is most important to note that the clouds were sighted at a latitude where there was extensive sunlight, thus increasing the likelihood of ozone loss both locally and downstream due to enhancements in reactive chlorine expected from heterogeneous chemical processing within the PSCs.
During the FIRE 2 (First International Satellite Cloud Climatology Project Regional Experiment) project, NOAA's Wave Propagation Laboratory (WPL) operated its 8-mm wavelength Doppler radar extensively in the vertically pointing mode. This allowed for the calculation of a number of important cirrus cloud parameters, including cloud boundary statistics, cloud particle characteristic sizes and concentrations, and ice mass content (imc). The flux of imc, or, alternatively, ice mass flux (imf), is also an important parameter of a cirrus cloud system. Ice mass flux is important in the vertical redistribution of water substance and thus, in part, determines the cloud evolution. It is important for the development of cloud parameterizations to be able to define the essential physical characteristics of large populations of clouds in the simplest possible way. One method would be to normalize profiles of observed cloud properties, such as those mentioned above, in ways similar to those used in the convective boundary layer. The height then scales from 0.0 at cloud base to 1.0 at cloud top, and the measured cloud parameter scales by its maximum value so that all normalized profiles have 1.0 as their maximum value. The goal is that there will be a 'universal' shape to profiles of the normalized data. This idea was applied to estimates of imf calculated from data obtained by the WPL cloud radar during FIRE II. Other quantities such as median particle diameter, concentration, and ice mass content can also be estimated with this radar, and we expect to also examine normalized profiles of these quantities in time for the 1993 FIRE II meeting.
Photopolarimetric observations of a prominent bright zone and a dark belt of Jupiter in red and blue light are analyzed which were performed by Pioneer 10 at phase angles of 12, 23, 34, 109, 120, 127, and 150 deg. Geometric and photometric reductions of the imaging data are described, the instrument sensitivity at various times is evaluated, and the data are referred to an absolute scale. The observations are analyzed in detail by comparing the data with results of radiative-transfer calculations for specific scattering models of Jupiter's atmosphere. These models include those with a vertical structure consisting of a layer of Rayleigh-scattering gas above a semiinfinite mixture of cloud particles and gas, those having a small quantity of aerosols in the gas above either the diffuse cloud in a reflecting-scattering model or the top cloud of a two-cloud-layer model, those in which a forward-scattering haze is mixed uniformly with gas, and those containing dust layers. It is found that in both the belt and the zone in red as well as blue light, cloud phase functions are required which provide both strong forward scattering and some backscattering.
A one-dimensional climate model with an interactive cloud formation and precipitation program is used to study the relationship between cloud microphysical processes and climate. It is shown that the rate of precipitation is directly proportional to the fourth power of the mean cloud particle radius. The effects of CO2 doubling on the climate are examined. It is suggested that smaller cloud droplets may be produced by condensation nuclei over the oceans, as a result of greenhouse warming and pollution over land. Larger cloud droplets could be caused by the removal of cloud-forming nuclei, resulting from enhance precipitation due to greenhouse perturbations.
This paper examines three-dimensional (3D) radiative effects, which arise from horizontal radiative interactions between areas that have different cloud properties. Earlier studies have argued that these effects can cause significant uncertainties in current satellite retrievals of cloud properties, because the retrievals rely on one-dimensional (1D) theory and do not consider the effects of horizontal changes in cloud properties. This study addresses two questions: which retrieved cloud properties are influenced by 3D radiative effects, and where 3D effects tend to occur? The influence of 3D effects is detected from the wayside illumination and shadowing make clouds appear asymmetric: Areas appear brighter if the cloud top surface is tilted toward, rather than away from, the Sun. The analysis of 30 images by the Moderate Resolution Imaging Spectroradiometer (MODIS) reveals that retrievals of cloud optical thickness and cloud water content are most influenced by 3D effects, whereas retrievals of cloud particle size are much less affected. The results also indicate that while 3D effects are strongest at cloud edges, cloud top variability in cloud interiors, even in overcast regions, also produces considerable 3D effects. Finally, significant 3D effects are found in a wide variety of situations, ranging from thin clouds to thick ones and from low clouds to high ones.
Clouds strongly modulate radiative transfer processes in the Earth's atmosphere. Studies, which simulate bulk properties of clouds, such as absorption, require methods that accurately account for multiple scattering among individual cloud particles. Multiple scattering processes are well described by MIE-theory, if interacting particles have a spherical shape. This is a good assumption for water droplets. Thus, simulations for water clouds (especially for interactions with solar radiation) usually apply readily available MIE-codes. The presence of different drop-sizes, however, necessitates repetitive calculations for many sizes. The usual representation by a few sizes is likely to miss contributions from densely distributed, sharp resonances. Despite their usually narrow width, integrated over the entire size-spectrum of a cloud droplet distribution, the impact of missed resonances could add up. The consideration of these resonances tends to increase cloud extinction and cloud absorption. This mechanism for a larger (than by MIE-methods predicted) solar absorption has the potential to explain observational evidence of larger than predicted cloud absorption at solar wavelengths. The presentation will address the absorption impact of added resonances for typical properties of water clouds (e.g. drop size distributions, drop concentrations and cloud geometry). Special attention will be given to scenarios with observational evidence of law than simulated solar absorption; particularly if simultaneous measurements of cloud micro- and macrophysical properties are available.
Observations by several cameras on the Perseverance rover showed a 22° scattering halo around the Sun over several hours during northern midsummer (solar longitude 142°). Such a halo has not previously been seen beyond Earth. The halo occurred during the aphelion cloud belt season and the cloudiest time yet observed from the Perseverance site. The halo required crystalline water-ice cloud particles in the form of hexagonal columns large enough for refraction to be significant, at least 11 μm in diameter and length. From a possible 40-50 km altitude, and over the 3.3-hour duration of the halo, particles could have fallen 3-12 km, causing downward transport of water and dust. Halo-forming clouds are likely rare due to the high supersaturation of water that is required but may be more common in northern subtropical regions during northern midsummer.
Summary studies are presented for the entire cloud observation archive from the NASA Global Atmospheric Sampling Program (GASP). Studies are also presented for GASP particle-concentration data gathered concurrently with the cloud observations. Cloud encounters are shown on about 15 percent of the data samples overall, but the probability of cloud encounter is shown to vary significantly with altitude, latitude, and distance from the tropopause. Several meteorological circulation features are apparent in the latitudinal distribution of cloud cover, and the cloud-encounter statistics are shown to be consistent with the classical mid-latitude cyclone model. Observations of clouds spaced more closely than 90 minutes are shown to be statistically dependent. The statistics for cloud and particle encounter are utilized to estimate the frequency of cloud encounter on long-range airline routes, and to assess the probability and extent of laminaar flow loss due to cloud or particle encounter by aircraft utilizing laminar flow control (LFC). It is shown that the probability of extended cloud encounter is too low, of itself, to make LFC impractical. This report is presented in two volumes. Volume I contains the narrative, analysis, and conclusions. Volume II contains five supporting appendixes.
Cloud representation is one of the largest uncertainties in the current weather and climate models. In this article, the observations and modeling of the radiative effect on (cloud) microphysics (REM) from the Arctic to the Tropics are overviewed, providing a new direction to meet the challenge of cloud representation. REM deals with the radiation-induced temperature difference between cloud particles and air. It leads to two common phenomena observed at the surface—dew and frost—and impacts clouds aloft significantly, which is noticed via the wide occurrence of horizontally oriented ice crystals (HOICs). However, REM has been overlooked by all of the operational weather and climate models. Based on the bin model of REM and the global distribution of radiative cooling/warming, the observations of REM from several platforms (e.g., aircrafts, field campaigns, and satellites) are coordinated in this article, yielding a global picture on REM. As a result, the picture is compatible with the global distribution of HOICs and other ice crystal characteristics obtained from various clouds on the globe, such as diamond dust (or clear-sky precipitation) in the Arctic, sub-visual cirrus clouds in the tropical tropopause layer, and other cirrus clouds from the low to high latitudes. In addition, ice crystals possess relatively strong REM compared to liquid drops because their aspect ratio is usually not one. The global picture on REM can be used by the weather and climate modelers to diagnose their cloud representation biases. It can also be used to improve the atmospheric ice retrieval algorithm from satellite observations.