Search NASA⌕ Search

SEARCH · Search NASA

Results for “POWER FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Dichlorinated Dithienylethene-Based Copolymers for Air-Stable n-Type Conductivity and Thermoelectricity

Here, two donor-acceptor polymers were obtained by coupling difluoro- and dichloro-substituted forms of the electron-deficient unit BDOPV and the relatively weak donor moiety dichlorodithienylethene (ClTVT). The conductivity and power factors of doped devices are different for the chlorinated and fluorinated BDOPV polymers. High electron conductivity of 38.3 and 16.1 S cm -1 were obtained from the chlorinated and fluorinated polymers with N-DMBI, respectively, and 12.4 and 2.4 S cm -1 were obtained from the chlorinated and fluorinated polymers with CoCp 2 , respectively, from drop-cast devices. The corresponding power factors are 22.7, 7.6, 39.5 and 8.0 μW m -1 K -2 , respectively. Doping of PClClTVT with N-DMBI results in excellent air-stability; the electron conductivity of devices with 50 mol% N-DMBI as dopant remained up to 4.9 S m -1 after 222 days in the air, the longest for an n-doped polymer stored in air, with a thermoelectric power factor of 9.3 μW m -1 K -2 . However, the conductivity of PFClTVT-based devices can hardly be measured after 103 days. These observations are consistent with morphologies determined by grazing incidence wide angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). The results demonstrate that chemical structures leading to dense and ordered packing can enhance electron conductivity and air stability of n-type donor-acceptor polymers.

30 DIRECT ENERGY CONVERSION↗

Effect of antimony concentration on structural and transport properties of (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} mixed crystal

Polycrystalline (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} (0.60≤x≤0.68) alloys have been synthesized by solid state reaction method. Structural characterizations have been done using X-Ray Diffraction (XRD). Lattice parameter decreases with antimony (Sb) concentration. Sb doping leads to the modification in band structure and Fermi surface geometry. Band gap calculated from thermal variation of resistivity (ρ-T) data, decreases with Sb concentration. Sb concentration dependent power factor near room temperature have been calculated from obtained resistivity and thermopower data. Highest power factor obtained for (Bi{sub 0.40}Sb{sub 0.60}){sub 2}Te{sub 3} alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dopant-Dependent Increase in Seebeck Coefficient and Electrical Conductivity in Blended Polymers with Offset Carrier Energies

The strong and counterproductive interrelationship of thermoelectric parameters remains a bottleneck to improving thermoelectric performance, especially in polymer-based materials. In this paper, we decouple the electrical conductivity and Seebeck coefficient, achieving increases in at least one of these two parameters while the other is maintained or slightly increased as well. This is done using an alkylthio-substituted polythiophene (PQTS12) as additive in poly(bisdodecylquaterthiophene) (PQT12) with tetrafluorotetracyanoquinodimethane (F4TCNQ) and nitrosyl tetrafluoroborate (NOBF4) as dopants. The power factor increased two orders of magnitude with the PQTS12 additive at constant doping level. Using a second pair of polymers, poly(2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene (PBTTTC12) and poly(2,5-bis(3-dodecylthiothiophen-2-yl)thieno[3,2-b]thiophene, (PBTTTSC12), with higher mobilities, we also observed the decoupling of the Seebeck coefficient and electrical conductivity, and achieved higher power factor. Distinguished from recently reported works, these two sets of polymers possess very closely offset carrier energy levels (0.05 ~ 0.07 eV), and the microstructure, assessed using grazing incidence X-ray scattering, and mobility evaluated in field-effect transistors, was not adversely affected by the blending. Experiments, calculations and simulations are consistent with the idea that blending and doping polymers with closely-spaced energy levels and compatible morphologies to promote carrier mobility favors increased power factors.

42 ENGINEERING↗

Thermoelectric Figure of Merit of a Superatomic Crystal Re 6 Se 8 I 2 Monolayer

Superatomic materials are newly emerging candidates for high-performance thermoelectric (TE) devices due to their intrinsic ultralow thermal conductivities. However, the low TE power factor becomes a huge obstacle to reaching the required the dimensionless figure of merit (ZT) values for practical applications. Here, motivated by the recently synthesized superatomic Re 6 Se 8 I 2 monolayer [J. Am. Chem. Soc. 144, 74 (2022)], we study its superior thermoelectric properties by using density functional theory combined with phonon Boltzmann transport theory and deep potential molecular dynamics. We show that the large mass and anharmonic Re-I bonds introduce strong phonon scattering and result in low lattice thermal conductivity of 1.20 W m -1 K -1 at 300 K, while the strong and harmonic Re-Se network ensures the high TE power factor of 4344 μW m -1 K -2 in b direction for n-type doping. This is an order of magnitude higher than that of other cluster-based materials. Due to the low thermal conductivity and high TE power factor, Re 6 Se 8 I 2 exhibits high ZT values of 1.20 (500 K) and 1.43 (900 K) with n-type doping along the b direction among all the cluster-based thermoelectric materials reported so far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Framework to Quantify the Economic Impact from Local VAR Compensation

It is generally accepted that reactive power (or Var) compensation will bring benefits for utilities and industrial customers by providing local voltage and power factor support. However, there is a lack of a systematic approach to quantitatively identify the economic benefit. In addition, with deregulation and restructuring, it is important to indicate the amount of benefit that each market participant may potentially receive given the right price signals. If such information can be easily obtained and presented, it will be more convenient for decision-markers to determine the cost benefit sharing of installing a Var compensator. The vision of this paper is to lay out a possible method for quantitatively evaluating the benefits from local reactive power compensation. The approach is to quantify the benefits into several categories such as reduced losses, shifting reactive power flow to real power flow, and increased transfer. The calculation of these benefits are illustrated with a simple two-bus power system model and then presented with a more complicated model using Optimal Power Flow to calculate the benefits. Simulation on the more complex system is conducted with seven buses in two areas. The simulation results show that the possible economic benefits can be significant, if compared with capacity payments to central generators or payment of power factor penalties applied by utilities. The potential economic value of local Var compensation may give various parties in electricity supply, delivery and end-use consumption a better understanding of the Var benefits to assist their cost-benefit analysis for Var compensation installation. Sensitivity analysis is also provided to illustrate that the benefits may not be monotonically increasing. Also, this paper suggests that the future reactive power market should consider local Var providers or other way to encourage load Var capability, since local Var benefit is significant.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Weak Electron Phonon Coupling and Deep Level Impurity for High Thermoelectric Performance Pb 1–x Ga x Te

High ZT of 1.34 at 766 K and a record high average ZT above 1 in the temperature range of 300-864 K are attained in n-type PbTe by engineering the temperature-dependent carrier concentration and weakening electron–phonon coupling upon Ga doping. The experimental studies and first principles band structure calculations show that doping with Ga introduces a shallow level impurity contributing extrinsic carriers and imparts a deeper impurity level that ionizes at higher temperatures. This adjusts the carrier concentration closer to the temperature-dependent optimum and thus maximizes the power factor in a wide temperature range. The maximum power factor of 35 μW cm -1 K -2 is achieved for the Pb 0.98 Ga 0.02 Te compound, and is maintained over 20 μWcm-1 K-2 from 300 to 767 K. Band structure calculations and X-ray photoelectron spectroscopy corroborate the amphoteric role of Ga in PbTe as the origin of shallow and deep levels. Additionally, Ga doping weakens the electron–phonon coupling, leading to high carrier mobilities in excess of 1200 cm 2 V -1 s -1 . Enhanced point defect phonon scattering yields a reduced lattice thermal conductivity. Here, we provide a new avenue, beyond the conventional shallow level doping, for further improving the average ZT in thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High figure of merit and thermoelectric properties of Bi-doped Mg{sub 2}Si{sub 0.4}Sn{sub 0.6} solid solutions

The study of Mg{sub 2}Si{sub 1−x}Sn{sub x}-based thermoelectric materials has received widespread attention due to a potentially high thermoelectric performance, abundant raw materials, relatively low cost of modules, and non-toxic character of compounds. In this research, Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} solid solutions with the nominal Bi content of 0≤y≤0.03 are prepared using a two-step solid state reaction followed by spark plasma sintering consolidation. Within this range of Bi concentrations, no evidence of second phase segregation was found. Bi is confirmed to occupy the Si/Sn sites in the crystal lattice and behaves as an efficient n-type dopant in Mg{sub 2}Si{sub 0.4}Sn{sub 0.6}. Similar to the effect of Sb, Bi doping greatly increases the electron density and the power factor, and reduces the lattice thermal conductivity of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions. Overall, the thermoelectric figure of merit of Bi-doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions is improved by about 10% in comparison to values obtained with Sb-doped materials of comparable dopant content. This improvement comes chiefly from a marginally higher Seebeck coefficient of Bi-doped solid solutions. The highest ZT∼1.4 is achieved for the y=0.03 composition at 800 K. - Graphical abstract: (a)The relationship between electrical conductivity and power factor for Sb/Bi-doped Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}(Sb/Bi){sub y} (0<y≤0.03) solid solutions. (b)The correlation between temperature and the combination of the lattice and the bipolar terms of thermal conductivity of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. (c)Temperature dependent dimensionless figure of merit ZT of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. - Highlights: • Bi doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} showed 15% enhancement in the power factor as compared to Sb doped samples. • Bi doping reduced κ{sub ph} of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} due to stronger point defect scattering. • The highest ZT=1.4 at 800 K was achieved for Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 0.97}Bi{sub 0.03}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A MILP-Based Distribution Optimal Power Flow Model for Microgrid Operation

This paper proposes a distribution optimal power flow (D-OPF) model for the operation of microgrids. The proposed model minimizes not only the operating cost, including fuel cost, purchasing cost and demand charge, but also several performance indices, including voltage deviation, network power loss and power factor. It co-optimizes the real and reactive power form distributed generators (DGs) and batteries considering their capacity and power factor limits. The D-OPF is formulated as a mixed-integer linear programming (MILP). Numerical simulation results show the effectiveness of the proposed model.

distributed generators↗

Improved electrical properties of n-type SiGe alloys

The effect of changes in the carrier concentration and mobility for heavily doped n-type SiGe on the electrical power factor has been investigated. It has been shown that power factors of 37-40 microV/cm-K-squared can be achieved with carrier concentrations of 2.0 - 2.5 x 10 exp 20/cu cm and mobilities of 38-40 sq cm/V-sec. Many samples with suitable carrier concentration do not have high mobilities and some rationale for this behavior is presented. Initial results are presented on fabrication of n-type samples from ultrafine powders. The emphasis in this work is to achieve thermal conductivity reductions by adding inert particles to scatter midfrequency phonons.

Scoville, A. N.↗

Improved Thermoelectric Performance of p-type Skutterudite YbxFe4-yPtySb12 (0.8 x 1, y = 1 and 0.5)

Thermoelectric performance of p-type skutterudites currently lags that of the corresponding n-type materials and improvement of this important class of materials have become the focus of considerable research effort world-wide. Recent calculations find promising band structural features in p-type skutterudite materials of the type AeFe3NiSb12 ( Ae = Ca, Sr, or Ba) which could potentially lead to excellent thermoelectric properties. Recent work on the Yb- filled analog of the these formulations (YbFe3NiSb12) however finds that the onset of intrinsic conduction at lower than expected temperatures deteriorates the performance above 500 K leading to poor performance in the temperature range of interest for automotive waste heat recovery applications. We therefore seek a way to increase the band gap in order to find a way to minimize the deleterious effects of intrinsic conduction. Here we present ab initio band structure calculations and the synthesis and thermoelectric properties of YbxFe4-yPtySb12 (0.8 x 1, y = 1 and 0.5). Ab initio calculations find that the band gap increases for YbFe3PtSb12 as compared to the Ni-containing analog, though no such increase in the band gap energy was found for as compared to YbFe3.5Ni0.5Sb12. The y = 1 samples shows a characteristic transition to intrinsic conduction with a decrease in the Seebeck coefficient at temperatures above 700 K. The increased carrier concentration in y = 0.5 virtually eliminates any evidence of intrinsic conduction and the Seebeck coefficients for these samples increase monotonically up to 750 K, resulting in power factors approaching 27 W/cm K2 at 750 K. These power factors combined with low thermal conductivity result in a ZT = 0.9 at 750 K for Yb0.95Fe3.5Pt0.5Sb12.

skutterudite↗

Spin-on-doping for output power improvement of silicon nanowire array based thermoelectric power generators

The output power of a silicon nanowire array (NWA)-bulk thermoelectric power generator (TEG) with Cu contacts is improved by spin-on-doping (SOD). The Si NWAs used in this work are fabricated via metal assisted chemical etching (MACE) of 0.01–0.02 Ω cm resistivity n- and p-type bulk, converting ~4% of the bulk thickness into NWs. The MACE process is adapted to ensure crystalline NWs. Current-voltage and Seebeck voltage-temperature measurements show that while SOD mainly influences the contact resistance in bulk, it influences both contact resistance and power factor in NWA-bulk based TEGs. According to our experiments, using Si NWAs in combination with SOD increases the output power by an order of 3 under the same heating power due to an increased power factor, decreased thermal conductivity of the NWA and reduced Si-Cu contact resistance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A High-Efficiency Isolated PFC AC-DC Topology with Reduced Number of Semiconductor Devices

A new three-level isolated ac-dc power factor correction (PFC) topology with a minimum number of semiconductor devices is the focus of this paper. This topology provides a high input power factor (PF), soft-switching, and higher efficiency than existing isolated ac-dc converters. Furthermore, the proposed circuit has lower voltage rating requirements for the secondary side devices, which leads to a lower total cost and minimizes total converter losses. This article presents a theoretical analysis describing the complete characterization of this new topology, and experimental results on a 1-kW prototype showing high PF and efficiency throughout the operating range.

42 ENGINEERING↗

Colligative thermoelectric transport properties in n-type filled CoSb{sub 3} determined by guest electrons in a host lattice

Among many kinds of thermoelectric materials, CoSb{sub 3} has received exceptional attention for automotive waste heat recovery. Its cage structure provides an ideal framework for the realization of phonon-glass electron-crystal strategy, and there have been numerous reports on the enhanced thermoelectric performance through the independent control of the thermal and electrical conductivity by introducing fillers into its cage sites. Herein, we report colligative thermoelectric transport properties in n-type CoSb{sub 3} from the viewpoint of “guest electrons in a host lattice.” Both the Seebeck coefficient and the charge transport properties are fundamentally determined by the concentration of the guest electrons, which are mostly donated by the fillers, in the conduction band of the host CoSb{sub 3}. Comparing this observation to our previous results, colligative relations for both the Seebeck coefficient and the mobility were deduced as functions of the carrier concentration, and thermoelectric transport constants were defined to predict the power factor in filled CoSb{sub 3}. This discovery not only increases the degree of freedom for choosing a filler but also provides the predictability of power factor in designing and engineering the n-type filled CoSb{sub 3} materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Can Tauc plot extrapolation be used for direct-band-gap semiconductor nanocrystals?

Despite that Tauc plot extrapolation has been widely adopted for extracting bandgap energies of semiconductors, there is a lack of theoretical support for applying it to nanocrystals. In this paper, direct-allowed optical transitions in semiconductor nanocrystals have been formulated based on a purely theoretical approach. This result reveals a size-dependant transition of the power factor used in Tauc plot, increasing from one half used in the 3D bulk case to one in the 0D case. This size-dependant intermediate value of power factor allows a better extrapolation of measured absorption data. Being a material characterization technique, the generalized Tauc extrapolation gives a more reasonable and accurate acquisition of the intrinsic bandgap, while the unjustified purpose of extrapolating any elevated bandgap caused by quantum confinement is shown to be incorrect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal and thermoelectric transport measurements of an individual boron arsenide microstructure

Recent first principles calculations have predicted that boron arsenide (BAs) can possess an unexpectedly high thermal conductivity that depends sensitively on the crystal size and defect concentration. However, few experimental results have been obtained to verify these predictions. In the present work, we report four-probe thermal and thermoelectric transport measurements of an individual BAs microstructure that was synthesized via a vapor transport method. The measured thermal conductivity was found to decrease slightly with temperature in the range between 250K and 350 K. The temperature dependence suggests that the extrinsic phonon scattering processes play an important role in addition to intrinsic phonon-phonon scattering. The room temperature value of (186646) Wm -1 K -1 is higher than that of bulk silicon but still a factor of four lower than the calculated result for a defect-free, non-degenerate BAs rod with a similar diameter of 1.15 μm. The measured p-type Seebeck coefficient and thermoelectric power factor are comparable to those of bismuth telluride, which is a commonly used thermoelectric material. In conclusion, the foregoing results also suggest that it is necessary to not only reduce defect and boundary scatterings but also to better understand and control the electron scattering of phonons in order to achieve the predicted ultrahigh intrinsic lattice thermal conductivity of BAs.

36 MATERIALS SCIENCE↗

A 1MHz Oak Ridge AC / DC Converter for UAV Contactless Charger Implementation

In this paper, a 1 MHz single-phase Oak Ridge Converter (ORC) AC/DC wireless power transfer (WPT) system is introduced for unmanned air vehicle (UAV) charging applications. The proposed advanced solution eliminates the design, weight, volume, and the cost of the power factor correcting (PFC) front-end rectifier compared to the conventional practices. Additionally, grid power quality requirements can be achieved with the presented innovative idea. With this method, single stage WPT primary side uses the hybrid grid frequency and high frequency (60 Hz and 1 MHZ) from ac source through the coupler coils and to UAV battery with GaN FETs. Experimental results of the single-phase system is presented to confirm the mathematical analyses with the source voltage of 110 VAC, RMS and output voltage of 40 VDC at 1 kW power with 6 inches air gap between couplers. The primary coupler consists of a ferrite-backed single-turn coil with a radius of 1.5 ft, and the secondary coupler is made with an air-core single-turn coil with radius of 1.2 ft. The system overall ac to dc efficiency is measured 77 % acquiring 0.99 power factor (PF) and 3.3 % current total harmonic distortion (THD) at 1 kW power.

Asa, Erdem↗

Thermoelectric transport properties of BaBiTe{sub 3}-based materials

BaBiTe{sub 3}, a material with low thermal conductivity, is an inferior thermoelectric material due to the poor electrical properties originated from its narrow band gap. We choose two types of dopants, K and La, trying to optimize its electrical transport properties. The minority carriers, which harm the Seebeck coefficient in this system, are suppressed by La doping. With the increase of both electrical conductivity and Seebeck coefficient, the power factor of 3% La doped BaBiTe{sub 3} reaches 3.7 μW cm{sup −1} K{sup −2} which increased by 40% from undoped BaBiTe{sub 3}. Besides high power factor, the thermal conductivity is also reduced in it. Eventually, a high ZT value, 0.25 at 473 K, for n-type BaBiTe{sub 3} is achieved in 3% La doped BaBiTe{sub 3}. - Graphical abstract: BaBiTe{sub 3} possesses a low thermal conductivity. However, it is an inferior thermoelectric material due to the poor electrical properties originated from its narrow band gap. A high ZT value of 0.25 at 473 K for n-type BaBiTe{sub 3} can be achieved through optimizing electrical transport properties via La doping. - Highlights: • BaBiTe{sub 3} is an analogue of these promising thermoelectric materials: such as CsBi{sub 4}Te{sub 6} and K{sub 2}Bi{sub 8}Se{sub 13}, etc. • BaBiTe{sub 3} possesses a low thermal conductivity. • La is an effective dopant to enhance electrical transport properties. • A high ZT value of 0.25 at 473 K can be achieved in n-type La-doped BaBiTe{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗