Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY RIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Preparation, phase structure and microwave dielectric properties of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramic

Graphical abstract: For chemical compatibility tests with silver electrode, mixtures of ceramic powders with 20 wt% Ag powders were cofired and analyzed to detect interactions between the low-fired samples and electrodes. XRD patterns and backscattered electron image of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics added with 1.5 wt% BCB cofired with Ag at 900 Degree-Sign C for 2 h are presented in . Backscattered electron image analysis reveals no interaction to form new phases after firing. This observation is also confirmed by the evidence of no difference between the XRD patterns before and after firing. It is obvious that the reaction of low-fired CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics with Ag electrodes did not occur. Highlights: Black-Right-Pointing-Pointer A new microwave dielectric ceramic with good properties was reported. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) can lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) does not induce degradation of properties. Black-Right-Pointing-Pointer BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics can co-fire with Ag electrode. -- Abstract: A new low loss microwave dielectric ceramic with composition of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} was prepared by a conventional solid-state reaction method. The compound has a cubic spinel structure [Fd-3m (227)] similar to MgFe{sub 2}O{sub 4} with lattice parameters of a = 8.3939 Angstrom-Sign , V = 591.42 Angstrom-Sign {sup 3}, Z = 8 and {rho} = 4.30 g/cm{sup 3}. This ceramic has a low sintering temperature ({approx}1050 Degree-Sign C) and good microwave dielectric properties with relative permittivity of 21.4, Q Multiplication-Sign f value of 35,000 GHz and {tau}{sub f} value of -22 ppm/ Degree-Sign C. Furthermore, the addition of BaCu(B{sub 2}O{sub 5}) (BCB) can effectively lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C and does not induce much degradation of the microwave dielectric properties. Compatibility with Ag electrode indicates that the BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics are good candidates for LTCC applications.

36 MATERIALS SCIENCE↗

The polygallides: Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2}

Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} were obtained from reactions of Yb and Ge in excess liquid gallium. The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} was refined using X-ray and neutron diffraction data on selected single crystals. Yb{sub 3}Ga{sub 7}Ge{sub 3} crystallizes in the monoclinic space group C2/c with lattice constants a=12.2261(20) Angstrom-Sign , b=10.7447(20) Angstrom-Sign , c=8.4754(17) Angstrom-Sign and {beta}=110.288(30) Degree-Sign (neutron diffraction data). The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} is an intergrowth of planar layers of YbGa{sub x}Ge{sub y} and puckered layers of (Ge){sub n}. YbGa{sub 4}Ge{sub 2} crystallizes in a modified PuGa{sub 6} structure type in the tetragonal polar space group I4cm with lattice constants a=b=5.9874(6) Angstrom-Sign and c=15.1178(19) Angstrom-Sign . The structure of YbGa{sub 4}Ge{sub 2} is an intergrowth of puckered Ga layers and puckered Ga{sub x}Ge{sub y} layers with Yb atoms residing within the channels formed by the connection of the two layers. Physical properties, resistivity ({rho}), magnetic susceptibility ({chi}) and specific heat (C) were measured for Yb{sub 3}Ga{sub 7}Ge{sub 3}. No magnetic ordering was observed. It was found that at low temperatures, {rho} varied as T{sup 2} and C{proportional_to}T, indicating Fermi-liquid regime in Yb{sub 3}Ga{sub 7}Ge{sub 3} at low temperatures. - Graphical abstract: The compounds Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} are obtained from reactions of Yb and Ge in excess liquid gallium. Highlights: Black-Right-Pointing-Pointer Yb{sub 3}Ga{sub 7}Ge{sub 3} and YbGa{sub 4}Ge{sub 2} are two new polygallides. Black-Right-Pointing-Pointer The crystal structure of Yb{sub 3}Ga{sub 7}Ge{sub 3} was established using neutron diffraction data. Black-Right-Pointing-Pointer YbGa{sub 4}Ge{sub 2} is one of the rare polar intermetallic compounds. Black-Right-Pointing-Pointer The physical properties of Yb{sub 3}Ga{sub 7}Ge{sub 3} point to a Fermi-liquid regime at low temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiphase Nano-Composite Coatings for Achieving Energy Optimization

UES Inc. and ANL teamed in this work to develop novel coating systems for the protection of surfaces from thermal degradation mainly in two applications; Machining and Die casting. These coatings were specifically designed for the purpose by incorporating required material phases and the overall architecture, which led to reduce the energy usage and increase efficiency of the operations. Following the UES/ANL's feasibility work, the coatings were developed utilizing High power impulse magnetron sputtering (HiPMS) and Large area filtered arc deposition (LAFAD) techniques. Toughness, hardness and oxidation resistance: contrasting qualities have been mixed in the right proportion to attain the suitable material characteristic for the cause. Hafnium diboride (HfB 2 ) based materials provided such a system and its properties were tamed to attain the right combination of toughness and hardness by working on the microstructure and architecture of coatings. An effective interfacing material (graded concentrations of topcoat) was also achieved in this work to provide the required adhesion between the substrate and the coating. Combination of an appropriate bond coat and a functional top coat provided the present thermal degradation resistant coating for cutting tools and die-casting applications. Laboratory level performance tests and industrial level application tests by partner companies (Beta Site Testing) were used for the development of these coatings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synthesis of high efficient Ca{sub 2}SiO{sub 4}:Eu{sup 2+} green emitting phosphor by a liquid phase precursor method

Green emitting Eu{sup 2+}-doped Ca{sub 2}SiO{sub 4} phosphors were synthesized by three different methods (a conventional solid state reaction (SSR) method, a novel liquid phase precursor approach using SiO{sub 2} sol (LPP-SiO{sub 2}(sol)) and water-soluble silicon compound (LPP-WSS)). The obtained phosphors exhibited a broad excitation spectrum ranging from 225 to 450 nm and a strong green emission peak at 502 nm due to the 4f{sup 6}5d{sup 1}{yields}4f{sup 7}({sup 8}S{sub 7/2}) transition of Eu{sup 2+}. The highest luminescent intensity was obtained for the samples fired at 1100 Degree-Sign C. The dependence of luminescence properties on Eu{sup 2+} concentration for the phosphors synthesized using LPP-WSS method was also examined from 0.1 to 5.0 mol% and the maximum emission intensity was observed at 3.0 mol% Eu{sup 2+}. A detailed analysis using various characterizations revealed that phosphors produced by the LPP-WSS process exhibited more homogenous phase distribution and higher luminescence intensity than those from the other two processes, which suggested the potential application of Ca{sub 2}SiO{sub 4}:Eu{sup 2+} in white light-emitting diodes and fluorescence lamps. - Graphical abstract: The synthesis of Eu{sup 2+} doped Ca{sub 2}SiO{sub 4} green emitting phosphors were carried out using LPP-SiO{sub 2}(sol), LPP-WSS and SSR methods. The adequate reaction of starting materials base on solution mixing and cellulose impregnating during LPP-WSS procedure resulted in single crystalline structure as well as fine morphology, and finally determined a superior luminescent intensity. Highlights: Black-Right-Pointing-Pointer Ca{sub 2}SiO{sub 4}:Eu{sup 2+} phosphor was synthesized by three methods (SSR, LPP-SiO{sub 2} and LPP-WSS). Black-Right-Pointing-Pointer Effect of different processes on the property of phosphor was studied. Black-Right-Pointing-Pointer Phosphor produced by LPP-WSS showed better homogenous phase and fluorescent property. Black-Right-Pointing-Pointer LPP-WSS approach was identified as the best method among these three approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic behaviour of microwave hydrothermally synthesized nanocrystalline Mn{sub 1-x}-Zn{sub x} ferrites

Highlights: Black-Right-Pointing-Pointer The study of elastic properties of nanocrystalline MnZn ferrites synthesized by microwave hydrothermal method was reported for first time. Black-Right-Pointing-Pointer The temperature and magnetic field dependence of Young's modulus and internal friction have been measured for the first time. Black-Right-Pointing-Pointer To understand the interaction of domain wall with ultrasonic velocity a detailed study has been carried out for the first time. -- Abstract: Microwave-hydrothermal (M-H) method has been successfully used for synthesis of nanocrystalline Mn-Zn ferrites which are used for high frequency applications. The nanopowders were characterized using XRD and TEM. The particle size of the samples varies from {approx}20 nm to 25 nm. The powders were densified at 900 Degree-Sign C/30 min using microwave sintering method. The sintered ferrite samples were characterized using XRD, X-ray photoelectron spectroscopy (XPS), SEM and energy dispersive X-ray spectroscopy (EDS). The elastic behaviour and internal friction studies were carried out using composite piezoelectric oscillator method in the temperature range of 300-600 K. It was found that the anomalous behaviour observed in the temperature dependence of Young's modulus and internal friction disappears with the application of a magnetic field equal to the saturation field (900 mT) of the specimen under investigation. The observed anomalous behaviour in the vicinity of the Curie temperature was understood with the help of Landau's theory.

36 MATERIALS SCIENCE↗

Metal arsonate polymers of Cd, Zn, Ag and Pb supported by 4-aminophenylarsonic acid

The coordination preferences of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, (p-arsanilic acid) with CdCl{sub 2}{center_dot}2.5H{sub 2}O, ZnCl{sub 2}, Ag(SO{sub 3}CF{sub 3}) and Pb(NO{sub 3}){sub 2} have been investigated affording five new metal arsonate polymers. The reaction between 4-aminophenylarsonic acid and CdCl{sub 2}{center_dot}2.5H{sub 2}O resulted in a one-dimensional polymer, [{l_brace}Cd(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}]{sub n}, 1, in which the polymeric chain is propagated by bridging chlorides. Exchange of CdCl{sub 2} for ZnCl{sub 2} afforded [{l_brace}Zn{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}(Cl)]{sub n}, 2, featuring interlinked 6- and 8-membered [Zn-O-As] ring systems. The reaction of Ag(SO{sub 3}CF{sub 3}) with 4-aminophenylarsonic acid, afforded polymeric 3, [Ag(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2})]{sub n} where coordination of the amino group to the silver center is observed and [{l_brace}Ag{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})({mu}2-SO{sub 3}CF{sub 3}){sub 2}{r_brace}(SO{sub 3}CF{sub 3}){sub 2}]{sub n}, 4. By comparison, the reaction of p-arsanilic acid with Pb(NO{sub 3}){sub 2} yielded a polymeric chain [Pb(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(NO{sub 3}){sub 2}]{sub n}, 5 of similar topology to 1. The structures of 1-5 have been indiscriminately characterized by single crystal X-ray diffraction and their composition supported by relevant spectroscopic techniques. A comparison of the structural features of these polymers is used to determine the coordination preference of the ligand and factors influencing structural motifs, for example, the role of the anion. - Graphical abstract: The reaction of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, with cadmium, zinc, silver, and lead have resulted in five new metal arsonate polymers that have been characterized by single crystal X-ray diffraction and spectroscopic means. Highlights: Black-Right-Pointing-Pointer The synthesis of five novel metal arsonates with 4-aminophenyl arsonic acid. Black-Right-Pointing-Pointer Single crystal X-ray diffraction studies revealed polymeric structures. Black-Right-Pointing-Pointer The luminescent properties of the metal arsonates were investigated.

36 MATERIALS SCIENCE↗

3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} microspheres: Synthesis, characterization and photoluminescence

Highlights: Black-Right-Pointing-Pointer 3D hierarchical microspheres of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O were gained with glycine-assisted hydrothermal method. Black-Right-Pointing-Pointer Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination. Black-Right-Pointing-Pointer The PL properties of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied. -- Abstract: Via a simple glycine-assisted hydrothermal route, large-scale 3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O microspheres have been fabricated. Their purity, crystalline phase, morphologies and thermal stability were characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform IR (FTIR), scanning electron microscopy (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The SEM results indicate that the microspheres are self-assembled by numerous nanoflakes with mean thickness of 100 nm. Some factors influencing the morphologies of the Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O micro-/nanostructures have been systematically investigated, as well as quantity of glycine and the reaction time. The possible mechanism of the crystal growth and assembled procedure were also proposed. The as-prepared Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination in air at 600 Degree-Sign C. Furthermore, the photoluminescent properties of both Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied and exhibited different spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth of SnO{sub 2} films on 6H-SiC (0 0 0 1) by MOCVD

Highlights: Black-Right-Pointing-Pointer Heteroepitaxial SnO{sub 2} films have been successfully deposited on 6H-SiC (0 0 0 1) substrates. Black-Right-Pointing-Pointer We propose a growth model that SnO{sub 2} films consist of three domains with equivalent in-plane orientations. Black-Right-Pointing-Pointer The electrical properties of SnO{sub 2} films are in consistent with the structure analysis. -- Abstract: SnO{sub 2} films have been deposited on 6H-SiC (0 0 0 1) substrates by metalorganic chemical vapor deposition in the temperature range 500-750 Degree-Sign C. X-ray diffraction analysis showed that all the films were highly (1 0 0) oriented with the tetragonal rutile structure. Based on the structure analysis, we propose a growth model that SnO{sub 2} films consist of three variant structures with equivalent in-plane orientations. The in-plane orientation relationship between SnO{sub 2} and 6H-SiC was determined to be SnO{sub 2} [0 1 0]//SiC <101{sup Macron }0> and SnO{sub 2} [0 0 1]//SiC <12{sup Macron }10>. As the substrate temperature increased from 500 to 750 Degree-Sign C, the carrier concentration decreased from 1.1 Multiplication-Sign 10{sup 20} to 1.6 Multiplication-Sign 10{sup 18} cm{sup -3} while the resistivity increased from 0.01 to 0.57 {Omega} cm.

36 MATERIALS SCIENCE↗

Synthesis and characterization of flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres

Graphical abstract: In this paper, flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres were prepared via biomolecule-assisted solvothermal rate with CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine as raw materials. UV-vis absorption spectrum showed that the band gap of CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Highlights: Black-Right-Pointing-Pointer We reported a small biomolecule-assisted route to synthesis CuIn{sub 0.3}Ga{sub 0.7}S{sub 2}. Black-Right-Pointing-Pointer The possible mechanisms of flower-like CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} microspheres were proposed. Black-Right-Pointing-Pointer The as-prepared CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} products were investigated by XRD, XPS, FESEM and TEM. Black-Right-Pointing-Pointer The optical properties were investigated by UV-vis spectroscopy and Raman spectrum. -- Abstract: We report the formation and characterization of the flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres using CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine in the mixed solvent of ethylene glycol and distilled water (1:2, v/v) at 200 Degree-Sign C for 24 h. XRD results indicated that the CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} nanostructures have a (1 1 2) preferred orientation. The EDS and XPS analyses of the sample revealed that Cu, In, Ga and S were present in an atomic ratio of approximately 1:0.7:0.3:2. FESEM and TEM images showed that the product was microspheres, consisting of nanoplates with the thickness of about 20 nm. The optical properties were investigated by ultraviolet-visible (UV-vis) absorption spectroscopy and Raman spectroscopy. UV-vis absorption spectrum indicated that the band gap of as-synthesized flower-like CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Raman spectrum of the obtained CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} exhibited a high-intensity peak at 302 cm{sup -1} could be assigned as A1-mode.

36 MATERIALS SCIENCE↗

Can we make a Bohmian electron reach the speed of light, at least for one instant?

In Bohmian mechanics, a version of quantum mechanics that ascribes world lines to electrons, we can meaningfully ask about an electron's instantaneous speed relative to a given inertial frame. Interestingly, according to the relativistic version of Bohmian mechanics using the Dirac equation, a massive particle's speed is less than or equal to the speed of light, but not necessarily less. That is, there are situations in which the particle actually reaches the speed of light--a very nonclassical behavior. That leads us to the question of whether such situations can be arranged experimentally. We prove a theorem, Theorem 5, implying that for generic initial wave functions the probability that the particle ever reaches the speed of light, even if at only one point in time, is zero. We conclude that the answer to the question is no. Since a trajectory reaches the speed of light whenever the quantum probability current {psi}{gamma}{sup {mu}{psi}} is a lightlike 4-vector, our analysis concerns the current vector field of a generic wave function and may thus be of interest also independently of Bohmian mechanics. The fact that the current is never spacelike has been used to argue against the possibility of faster-than-light tunneling through a barrier, a somewhat similar question. Theorem 5, as well as a more general version provided by Theorem 6, are also interesting in their own right. They concern a certain property of a function {psi}:R{sup 4}{yields}C{sup 4} that is crucial to the question of reaching the speed of light, namely being transverse to a certain submanifold of C{sup 4} along a given compact subset of space-time. While it follows from the known transversality theorem of differential topology that this property is generic among smooth functions {psi}:R{sup 4}{yields}C{sup 4}, Theorem 5 asserts that it is also generic among smooth solutions of the Dirac equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metastability, spectrum, and eigencurrents of the Lennard-Jones-38 network

We develop computational tools for spectral analysis of stochastic networks representing energy landscapes of atomic and molecular clusters. Physical meaning and some properties of eigenvalues, left and right eigenvectors, and eigencurrents are discussed. We propose an approach to compute a collection of eigenpairs and corresponding eigencurrents describing the most important relaxation processes taking place in the system on its way to the equilibrium. It is suitable for large and complex stochastic networks where pairwise transition rates, given by the Arrhenius law, vary by orders of magnitude. The proposed methodology is applied to the network representing the Lennard-Jones-38 cluster created by Wales's group. Its energy landscape has a double funnel structure with a deep and narrow face-centered cubic funnel and a shallower and wider icosahedral funnel. However, the complete spectrum of the generator matrix of the Lennard-Jones-38 network has no appreciable spectral gap separating the eigenvalue corresponding to the escape from the icosahedral funnel. We provide a detailed description of the escape process from the icosahedral funnel using the eigencurrent and demonstrate a superexponential growth of the corresponding eigenvalue. The proposed spectral approach is compared to the methodology of the Transition Path Theory. Finally, we discuss whether the Lennard-Jones-38 cluster is metastable from the points of view of a mathematician and a chemical physicist, and make a connection with experimental works.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A parallel geometric multigrid method for finite elements on octree meshes

In this article, we present a parallel geometric multigrid algorithm for solving variable-coefficient elliptic partial differential equations on the unit box (with Dirichlet or Neumann boundary conditions) using highly nonuniform, octree-based, conforming finite element discretizations. Our octrees are 2:1 balanced, that is, we allow no more than one octree-level difference between octants that share a face, edge, or vertex. We describe a parallel algorithm whose input is an arbitrary 2:1 balanced fine-grid octree and whose output is a set of coarser 2:1 balanced octrees that are used in the multigrid scheme. Also, we derive matrix-free schemes for the discretized finite element operators and the intergrid transfer operations. The overall scheme is second-order accurate for sufficiently smooth right-hand sides and material properties; its complexity for nearly uniform trees is {Omicron}(N/n{sub p} log N/n{sub p}) + {Omicron}(n{sub p} log n{sub p}), where N is the number of octree nodes and n{sub p} is the number of processors. Our implementation uses the Message Passing Interface standard. We present numerical experiments for the Laplace and Navier (linear elasticity) operators that demonstrate the scalability of our method. Our largest run was a highly nonuniform, 8-billion-unknown, elasticity calculation using 32,000 processors on the Teragrid system, 'Ranger,' at the Texas Advanced Computing Center. Our implementation is publically available in the Dendro library, which is built on top of the PETSc library from Argonne National Laboratory.

99 GENERAL AND MISCELLANEOUS↗

Formulation of image quality prediction criteria for the Viking lander camera

Image quality criteria are defined and mathematically formulated for the prediction computer program which is to be developed for the Viking lander imaging experiment. The general objective of broad-band (black and white) imagery to resolve small spatial details and slopes is formulated as the detectability of a right-circular cone with surface properties of the surrounding terrain. The general objective of narrow-band (color and near-infrared) imagery to observe spectral characteristics if formulated as the minimum detectable albedo variation. The general goal to encompass, but not exceed, the range of the scene radiance distribution within single, commandable, camera dynamic range setting is also considered.

Huck, F. O.↗

Conducting Gamma Radiation Surveys on Municipal Roadways in Support of the Port Hope Area Initiative - 16602

The Port Hope Area Initiative (PHAI) is a community-based solution for the long-term management of historic low level radioactive waste (LLRW) resulting from 60 years of uranium and radium processing operations in the Town of Port Hope, Ontario. The project aims to remediate approximately 1.7 million cubic metres LLRW through the consolidation of waste within two Long-term Waste Management facilities to be constructed within the municipalities of Port Hope and Clarington. Within the Town of Port Hope, surveys are being conducted at approximately 5000 individual properties to confirm the presence of LLRW, delineate its extent and develop cost estimates for remediation. Identification of the presence of LLRW is based on multiple lines of evidence including reviews of historical information, gamma radiation surveys and sampling for four signature contaminants. Of the 5000 properties, a number are municipal rights of way, largely municipal roads, that may have been impacted through spillage of LLRW when it was historically transported through the community for disposal and/or through its use as construction backfill. This paper describes the completion of gamma radiation surveys on these municipal rights of way and the challenges that needed to be addressed working on travelled roadways in an active community. To maximize efficiency and minimize inconvenience to motorists the gamma surveys are conducted using a mobile platform that provides high resolution spectral gamma logging coupled to GPS for geo-spatial referencing. The system employs large volume, spectroscopy grade, sodium iodide detectors that permit the collection radiological spectra allowing for effective discrimination of gamma radiation signals emitted from naturally occurring background sources (e.g. potassium 40) from the gamma emissions associated with the specific contaminants of concern (e.g. Ra-226). The system can be deployed on any platform including a backpack. For the majority of the roadways surveyed a small, self-contained, road-legal trailer attached to a motorized tow vehicle (e.g. side-by-side UTV or small pick-up truck) is used as the survey platform. This accommodates the mounting of multiple detectors and allows the surveys to be conducted without the need for closing traffic lanes thus improving productivity and safety while minimizing inconvenience to motorists. Data quality objectives are readily achieved through the use of multiple passes over the same target area providing a geo-spatially rich dataset for post-processing and imaging. Topics covered in the paper include: the logistics of completing high quality gamma surveys on travelled roadways; health, safety and traffic considerations; community outreach and response; and a comparison of isotopically-speciated data vs total gamma readings evaluating the influence of background sources. The lessons learned will be applicable to anyone planning on conducting similar surveys in urban settings. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Indoor Dust Remedial Investigation Sampling at the Colonie FUSRAP Site - 15578

The Colonie Formerly Utilized Sites Remedial Action Program (FUSRAP) Site is located in the Town of Colonie, Albany County, New York. The U.S. Army Corps of Engineers (USACE) is currently addressing environmental contamination associated with the Site. The area surrounding the Site consists of residential and commercial properties, known as vicinity properties. Cleanup activities have been completed on many of these VPs under the FUSRAP to address depleted uranium contamination. Soil remediation activities have been substantially completed at the Colonie FUSRAP Site and its VPs under the FUSRAP. Recent studies performed by an independent party and under FUSRAP identified uranium within indoor dust in residencies and businesses in the immediate vicinity of the Site. The studies were limited to non-living areas such as basement window sills, garages, and attics. This paper discusses the indoor dust Remedial Investigation (RI) for the VPs at the Colonie FUSRAP Site. The indoor dust sample media presented many technical challenges regarding sampling design, data reduction, and data interpretation. In addition, because the RI is focused on numerous resident-owned, rental, and commercial properties, challenges where presented regarding right-of-entry to sample and concerns were raised regarding confidentiality of the results. In response to this, a community outreach communication and education program is being developed to mitigate property-owner concerns. The paper also identifies specific action levels used to determine future actions. Ultimately, property-specific risk assessments, performed at properties exceeding the action levels, will be used to determine whether a response action is appropriate under FUSRAP. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis, crystal structures, and luminescent properties of Cd(II) coordination polymers assembled from semi-rigid multi-dentate N-containing ligand

Three new polymers, [Cd(L){sub 2}(H{sub 2}O){sub 2}]{sub n} (1), [Cd{sub 3}(L){sub 2}({mu}{sub 3}-OH){sub 2}({mu}{sub 2}-Cl){sub 2}(H{sub 2}O){sub 2}]{sub n} (2), {l_brace}[Cd{sub 2}(L){sub 2}(nic){sub 2}(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O{r_brace}{sub n} (3) (HL=5-(4-((1H-1,2,4-triazol-1-yl)methyl)phenyl)-1H-tetrazole, Hnic=nicotinic acid) have been prepared and structurally characterized. Compounds 1 and 2 display 2D monomolecular layers built by the inter-linking single helical chains and L{sup -} ligands connecting chain-like [Cd({mu}{sub 3}-OH)({mu}{sub 2}-Cl)]{sub n} secondary building units, respectively. Compound 3 is constructed from the mixed ligands and possesses a (3,4)-connected framework with (4{center_dot}8{sup 2})(4{center_dot}8{sup 2}{center_dot}10{sup 3}) topology. Moreover, the fluorescent properties of HL ligand and compounds 1-3 are also been investigated. - Graphical abstract: Three new coordination polymers based on the semi-rigid multidentate N-donor ligand have been successfully synthesized by hydrothermal reaction. Complexes 1 and 2 exhibit the 2D layers formed by inter-linking single helices and L{sup -} anions bridging 1D chain-like SBUs, respectively. Complex 3 is buit by L{sup -} and assistant nic{sup -} ligands connecting metal centers and possesses a (3,4)-connected framework with (4 Multiplication-Sign 8{sup 2})(4 Multiplication-Sign 8{sup 2} Multiplication-Sign 10{sup 3}) topology. Moreover, these complexes display fluorescent properties indicating that they may have potential applications as optical materials. Highlights: Black-Right-Pointing-Pointer Three Cd-compounds were prepared from semi-rigid HL ligand with different N-containing groups. Black-Right-Pointing-Pointer They exhibit diverse structures from 2D monomolecular layer to 3D covalent framework. Black-Right-Pointing-Pointer The HL ligands displayed various coordination modes under different reaction conditions. Black-Right-Pointing-Pointer These compounds exhibit good luminescent properties.

36 MATERIALS SCIENCE↗

Growth and characterization of Fe{sub 3}O{sub 4} films

Highlights: Black-Right-Pointing-Pointer Pulsed laser deposition is the promising technique for growing high quality single phase Fe{sub 3}O{sub 4}. Black-Right-Pointing-Pointer Crystal quality and magnetic properties of the Fe{sub 3}O{sub 4} films strongly depend on the substrate temperature during the growth. Black-Right-Pointing-Pointer Optimum of the substrate temperature leads high crystal quality of single phase Fe{sub 3}O{sub 4}. -- Abstract: Iron oxide films were grown on sapphire substrates by pulsed laser deposition at substrate temperatures between 100 and 700 Degree-Sign C. X-ray diffraction, Raman spectroscopy, and vibrational sample magnetometer analysis revealed that structural and magnetic properties of the iron oxide films strongly depend on the substrate temperature during growth. Single phase Fe{sub 3}O{sub 4} film was successfully grown on sapphire substrate at a substrate temperature of 500 Degree-Sign C. The saturation magnetic moment of the single phase Fe{sub 3}O{sub 4} film is 499 emu/cm{sup 3}, which is in good agreement with the value reported for bulk magnetite, suggesting the Fe{sub 3}O{sub 4} film is of high crystal quality without antiphase boundaries.

36 MATERIALS SCIENCE↗

First-principles calculations of the electronic structure and optical properties of K{sub 1-x}Na{sub x}TaO{sub 3} (x=0, 0.25, 0.5, 0.75, 1)

The first-principles calculations are performed to investigate the cubic phase composite K{sub 1-x}Na{sub x}TaO{sub 3}(x=0, 0.25, 0.5, 0.75, 1), by using density functional theory (DFT) with the full potential linearized augmented plane wave (FP-LAPW) method. The energy band structures, density of states (DOS), electron density and optical properties are obtained. The results show that Na ion plays an important role in K{sub 1-x}Na{sub x}TaO{sub 3}. With the content of Na ion increasing, the changes of lattice parameters, energy gaps, bond lengths and optical properties of K{sub 1-x}Na{sub x}TaO{sub 3} are regular. Moreover, the dependence of ferroelectric photocatalysis on both optical properties and internal electronic structure are analyzed in detail. It is proposed that the doped materials are promising photocatalytic materials. - Graphical abstract: The density of states (DOS) of K{sub 1-x}Na{sub x}TaO{sub 3} (x=0.5). Highlights: Black-Right-Pointing-Pointer The first-principles calculations are performed, by using DFT with FP-LAPW method. Black-Right-Pointing-Pointer The changes of internal electronic structure and optical property of doped materials are regular. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on optical properties is analyzed. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on internal electronic structure is analyzed. Black-Right-Pointing-Pointer The doped materials are promising photocatalytic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗