Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Topographically driven crustal flow and its implication to the development of pinned oroclines

Pinned oroclines, a type of curved orogen which results from lateral pinning of a growing fold-thrust belt, tend to resemble parabolic Newtonian curvature modified by different degrees of flattening at the flow front. It is proposed that such curves can be generated by Newtonian crustal flow driven by topographic variations. In this model, regional topographic differences create a regional flow which produces a parabolic flow front on interaction with lateral bounding obstacles. Local topographic variations modify the parabolic curves and yield more flat-crested, non-Newtonian-type curvatures. A finite-difference thin-skin tectonic simulation demonstrates that both Newtonian and non-Newtonian curved orogens can be produced within a Newtonian crust.

Hsui, Albert T.↗
NASA NTRS1991

Rigid levitation, flux pinning, thermal depinning and fluctuation in high-Tc superconductors

Here, the author shows that the strong velocity-independent frictional force on a levitating superconductor and on any type-II superconductor moving in a homogeneous magnetic field is caused by pinning and depinning of the magnetic flux lines in its interior. Levitation may thus be used to investigate the pinning properties of a superconductor, and friction in a superconductor bearing may be minimized by choosing appropriate materials and geometries.

Brandt, E. H.↗
NASA NTRS1995

Quick-Release Pin With Lever Action

Lever-action quick-release pin operated more easily. Mechanism operated with gloved hand. In modified version, lever added to handle to facilitate actuation. Lever action reduces actuation force. Lever-action pin operated by squeezing on any point of moveable ends of lever and handle together between thumb and forefinger or by simply grasping and squeezing handle and lever with entire hand in more natural grasp.

Trevino, Robert C.↗
NASA NTRS1995

Introduction of artificial pinning centres in Bi2Sr2CaCu2O8 ceramics

Considering the phase equilibrium diagram of the system Bi203-SrO-CaO-CuO, single phase 'Bi2Sr2CaCu208' ceramics have been transformed by a simple annealing procedure into multiphase samples. The transformation results in the formation of second phases and in an increase of the intra-grain critical current density at 1 T of five times. This increase is believed to express improved pinning properties of the superconducting crystals. The prepared pinning centers are believed to be e.g. coherent precipitates (Guinier-Preston-zones) within the superconducting crystals.

Majewski, P.↗
NASA NTRS1994

Choked flow effects in the NSI driven pin puller

This paper presents an analysis for pyrotechnic combustion and pin motion in the NASA Standard Initiator (NSI) actuated pin puller. The conservation principles and constitutive relations for a multi-phase system are posed and reduced to a set of eight ordinary differential equations which are solved to predict the system performance. The model tracks the interactions of the unreacted, incompressible solid pyrotechnic, incompressible condensed phase combustion products, and gas phase combustion products. The model accounts for multiple pyrotechnic grains, variable burn surface area, and combustion product mass flow rates through an orifice located within the device. Pressure-time predictions compare favorably with experimental data. Results showing model sensitivity to changes in the cross-sectional area of the orifice are presented.

Gonthier, Keith A.↗
NASA NTRS1996

Pin bearing evaluation of LTM25 composite materials

This report summarizes pin bearing evaluations of LTM25 composite materials. Northrop Grumman Corporation conducted pin bearing testing and fabricate two panels from composite materials that cure at low temperatures. These materials are being incorporated into Unmanned Aerial Vehicles (UAVS) to reduce manufacturing costs since they allow the use of low-cost tooling and facilities. Two composite prepreg product forms were evaluated; MR50/LTM25 unidirectional tape, batch 2881vd and CFS003/LTM25 woven cloth, batch 2216. Northrop Grumman fabricated, machined, and tested specimens to determine the bearing strength in accordance with MIL-HDBK-17D, Volume 1, Section 7.2.4. Quasi-isotropic laminates from the two product forms were fabricated for these tests. In addition, 2 quasi-isotropic panels of dimensions 12 in. x 28 in. were fabricated (one each from the two product forms), inspected, and shipped to NASA Langley for further evaluation.

Shah, C. H.↗
NASA NTRS1996

Flows in Pinned Arrays Simulating Brush Seals

Flows through idealized pin arrays were investigated using an unstructured grid finite difference model and the simplified Ergun model to predict leakage flows and pressure drops in brush seals. The models are in good agreement in the laminar region with departures in the laminar-turbulent transition region defined by the simplified Ergun model. No local disturbances in the velocity or pressure fields, symptomatic of turbulence were found in the numerical results. The simplified model failed to predict the pressure drop of a 32-pin anisotropic array. Transitional and anisotropic behavior requires

Hendricks, R.C.↗
NASA NTRS2002

FSW of Tapered Thickness Welds using an Adjustable Pin Tool

This viewgraph presentation describes the advantages of tapered thickness welds in FSW (friction stir welding), the structure of FSW welds, the adjustable pin tool used in FSW. Other topics described include compliance and temperature measurement in a FSW system, loads and torque upon the pin tool and its ability to penetrate different metals, and the results and metallurgy of FSW welds.

Adams, Glynn↗
NASA NTRS2005

Impact of Cubic Pin Finned Surface Structure Geometry upon Spray Cooling Heat Transfer

Experiments were conducted to study the effects of enhanced surface structures on heat flux using spray cooling. The surface enhancements consisted of cubic pin fins machined on the top surface of copper heater blocks. The structure height, pitch, and width were parametrically vaned. Each copper block had a projected cross-sectional area of 2.0 sq cm. Measurements were also obtained on a heater block with a flat surface for baseline comparison purposes. A 2 x 2 nozzle array was used with PF-5060 as the working fluid. Thermal performance data were obtained under nominally degassed (chamber pressure of 41.4 kPa) and gassy conditions (chamber with N2 gas at 100.7 kPa) with a bulk fluid temperature of 20.5 C. Results for both the degassed and gassy cases show that structure width and separation distance have a dominant effect upon the heat transfer for the size ranges used. Cubic pin fin height had little impact upon heat flux. The maximum critical heat flux (CHF) attained for any of the surfaces was 121 W/sq cm, giving an enhancement of 51% relative to the flat surface case under nominally degassed conditions. The gassy case had a maximum CHF of 149 W/sq cm, giving an enhancement of 38% relative to the flat surface case.

Silk, Eric A.↗
NASA NTRS1991

Front-illuminated CCD with open pinned-phase region and two-phase transfer gate regions

A front-illuminated CCD of relative high quantum efficiency (QE) and high charge transfer efficiency (CTE) utilizes an open-phase region for receiving photons and two-phase gate regions (.phi..sub.1 and .phi..sub.2) for transferring electrons collected in one pixel to the next. The open-phase region is implanted with additional n-type elements (phosphorus) in order to increase the potential of the CCD channel in the open-phase region for collection of electrons and additionally implanted with concentrated and very shallow p-type elements (boron) to pin the surface of the n-channel in the open-phase region to OV, while gate region .phi..sub.1 and .phi..sub.2 are biased to -3.5V and driven to +10V by a two-phase transfer clock. The open pinned-phase (OPP) region thus permits two-phase transfer clocking and optimum reception of photons during the integration periods between transfer clock pulses.

Janesick, James R.↗
NASA NTRS2008

Failure Analysis of Electrical Pin Connectors

A study was initiated to determine the root cause of failure for circuit board electrical connection pins that failed during vibRatory testing. The circuit board is part of an unmanned space probe, and the vibratory testing was performed to ensure component survival of launch loading conditions. The results of this study show that the pins failed as a result of fatigue loading.

Newman, John A.↗
NASA NTRS2009

Lightning Pin Injection Testing on MOSFETS

Lightning transients were pin-injected into metal-oxide-semiconductor field-effect transistors (MOSFETs) to induce fault modes. This report documents the test process and results, and provides a basis for subsequent lightning tests. MOSFETs may be present in DC-DC power supplies and electromechanical actuator circuits that may be used on board aircraft. Results show that unprotected MOSFET Gates are susceptible to failure, even when installed in systems in well-shielded and partial-shielded locations. MOSFET Drains and Sources are significantly less susceptible. Device impedance decreased (current increased) after every failure. Such a failure mode may lead to cascading failures, as the damaged MOSFET may allow excessive current to flow through other circuitry. Preliminary assessments on a MOSFET subjected to 20-stroke pin-injection testing demonstrate that Breakdown Voltage, Leakage Current and Threshold Voltage characteristics show damage, while the device continues to meet manufacturer performance specifications. The purpose of this research is to develop validated tools, technologies, and techniques for automated detection, diagnosis and prognosis that enable mitigation of adverse events during flight, such as from lightning transients; and to understand the interplay between lightning-induced surges and aging (i.e. humidity, vibration thermal stress, etc.) on component degradation.

Ely, Jay J.↗
NASA NTRS2011

Lightning Pin Injection Test: MOSFETS in "ON" State

The test objective was to evaluate MOSFETs for induced fault modes caused by pin-injecting a standard lightning waveform into them while operating. Lightning Pin-Injection testing was performed at NASA LaRC. Subsequent fault-mode and aging studies were performed by NASA ARC researchers using the Aging and Characterization Platform for semiconductor components. This report documents the test process and results, to provide a basis for subsequent lightning tests. The ultimate IVHM goal is to apply prognostic and health management algorithms using the features extracted during aging to allow calculation of expected remaining useful life. A survey of damage assessment techniques based upon inspection is provided, and includes data for optical microscope and X-ray inspection. Preliminary damage assessments based upon electrical parameters are also provided.

Ely, Jay J.↗
NASA NTRS2011

Connector pin and method

An electrical connector and method includes a connector and a conforming element proximate to or in contact with the mating end of the connector so as to prevent distortion of a matable end. The matable end of the connector may be of a female or male type and may be of a post, tube, blade, pin, or other configuration. An element made of conforming material, for example, an elastomer, epoxy or rubber type material, is configured and positioned in contact with the matable end of the connector, providing support during assembly to prevent distortion of the matable end. The conforming element may be rectangular, wedge, cylindrical, conical, annular, or of another configuration as required to provide support to the connector pin. The conforming element may be fastened with an adhesive to the matable end to further prevent distortion.

Davis, Donald R.↗
DOE OSTI2022

Variable pin fin construction to facilitate compliant cold plates

A device can comprise a plurality of layers stacked and bonded on one another, wherein at least one layer of the plurality of layers comprises: a first active region comprising first pin portions positioned in a first planar arrangement; and a second active region comprising second pin portions positioned in a second planar arrangement, wherein the second planar arrangement is different from the first planar arrangement. The device can also comprise a conformable layer adjacent to at least one of the plurality of layers.

Schultz, Mark Delorman↗
DOE OSTI2022

An influence of manufacturing tolerances on Pin-Cell k-infinity of MOX fuel using data from the FUBILA experiment program

An influence of manufacturing tolerances (MTs) was evaluated on the pin-cell k-infinity of MOX fuel through the random sampling of CASMO5 calculations. The data from the FUBILA experiment program was used as the manufacturing parameters. For the uncertainties of element/isotope mass fractions, their covariance matrices were calculated by the generalized least square method. The total k-infinity uncertainty was 120-250 pcm (percent mille). From the breakdown of k-infinity uncertainty per materials, the MTs of fuel pellet had a dominant influence. The individual influences were also evaluated for element/isotope mass fractions, an inner/outer diameter, and a density. Those of element/isotope mass fractions were less than a few dozen pcm. Since the perturbations of fuel pellet diameter and density caused large variations to the total amount of heavy metals and effect of spatial self-shielding, they had a negative correlation with the k-infinity perturbation. On the AG3 (Al-Mg alloy) over-cladding, the inner/outer diameter perturbations had both negative and positive correlations. The negative one was due to decrease in amount of light water and the positive one was due to increase in amount of AG3. Since the effect of neutron slowing-down by light water had a dominant influence, the influence of the former negative correlation was larger than that of the latter positive correlation. It is, therefore, concluded that the consideration of the MTs that had a large influence on the effect of neutron slowing-down is important for precise quantification of the pin-cell k-infinity uncertainty of MOX fuel. (author)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

The Experimental and Numerical Investigation of Internal Heat Transfer for Supercritical Carbon Dioxide Cooling in a Staggered Pin Fin Array and Single-Jet Impingement

Over the past decade, the drive to reduce greenhouse gas emissions and to increase thermal efficiency for turbomachinery has invigorated the application of supercritical carbon dioxide (sCO2) power cycles for energy generation. Compared to the industry standard air cycles, sCO2 applications hold the potential for several advantages, including higher efficiencies, smaller footprints, and zero greenhouse gas emissions. However, like any turbomachinery application, the turbine inlet temperature must increase to increase thermal efficiency. This introduces the need for internal cooling features to avoid material failure as operating conditions rise. Two standard features include pin fin turbulators in the trailing edge and jet impingement in the airfoil's leading edge. Over the past several decades, these features have been the subject of extensive research. However, the move to the sCO2 operating environment creates the need to re-visit these features to quantify the heat transfer capabilities within this supercritical cooling environment. The first objective of this paper is to discuss the development of the experimental demonstration for internal heat transfer testing at 200 bar and 400 Celsius, which sits well within the CO2 supercritical region. Next, the heat transfer for pin fin turbulators and single-jet impingement in the sCO2 environment is compared to existing air data-derived correlations to quantify any deviations from literature correlations. Finally, the experimental process aims to validate internal cooling conjugate heat transfer numerical simulations for sCO2 turbines.

20 FOSSIL-FUELED POWER PLANTS↗