Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Ab initio study of intrinsic, H and He point defects in hcp-Er

Ab initio calculations based on density functional theory have been performed to determine the properties of self-interstitial atoms (SIAs), vacancies, and single H and He atoms in hcp-Er. The results show that the most stable configuration for an SIA is a basal octahedral (BO) configuration, while the octahedral (O), basal split (BS) and crowdion (C) interstitial configurations are less stable, followed by the split <0001> dumbbell and tetrahedral configurations. For both H and He defects, the formation energy of an interstitial atom is less than that of a substitutional atom in hcp-Er. Furthermore, the tetrahedral interstitial position is more stable than an octahedral position for both He and H interstitials. The hybridization of the He and H defects with Er atoms has been used to explain the relative stabilities of these defects in hcp-Er.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interaction Rates of Group-III and Group-V Impurities with Intrinsic Point Defects in Irradiated Si and Ge

A comparative study of interactions of shallow impurities with primary defects in oxygen- and carbon-lean moderately doped Si and Ge subjected to irradiation with 0.9 MeV electrons, {sup 60}Co gamma-rays, and 15 MeV protons at room temperature is presented and discussed. For the quantitative characterization of such interactions, changes in the total concentration of the original shallow group-V donor or group-III acceptor impurities in the irradiated materials are determined by Hall effect measurements over a wide temperature range. Losses of the shallow donor or acceptor states in the irradiated Si and Ge are indicative of their removal rates that can be used for estimation of production rates of primary defects interacting with the dopants. Some important factors affecting the interactions between primary defects and shallow impurities in Si and Ge are highlighted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoinduced current transient spectroscopy technique applied to the study of point defects in polycrystalline CdS thin films

CdS thin films of variable thickness (between 160 and 1200 nm) were prepared using rf magnetron sputtering. X-ray diffraction measurements showed that the films have hexagonal structure and that the crystallites are preferentially oriented with the <002> axis perpendicular to the substrate surface. The results of electrical conductivity measurements as a function of film thickness and of temperature provide evidence that the conductivity is controlled by a thermally activated mobility in the presence of an intergrain barrier. The room temperature barrier height phi decreases with the increase in film thickness. Values of phi between 0 and 0.25 eV were determined. Photoinduced current transient spectroscopy performed on five samples having different thicknesses showed the presence of 11 traps with activation energies in the range 0.08-1.06 eV; deeper traps being observed on thinner films. By comparison with literature results, seven traps are attributed to native defects and foreign impurities (mainly Cu, Au, and Ag). Four other traps, not previously observed, are attributed to residual defects. The observation that deeper traps are detected in samples with larger barrier heights has been discussed and interpreted in terms of the energy band profile near the grain boundary.

36 MATERIALS SCIENCE↗

Light-induced point defect reactions of residual iron in crystalline silicon after aluminum gettering

Deep level transient spectroscopy is used to study light-induced reactions of residual iron impurities after aluminum gettering (AlG) in crystalline silicon. White-light illumination at room temperature leads to the formation of a defect which is associated with a donor level at 0.33 eV above the valence band. This defect is stable up to about 175 deg. C where it dissociates reversibly in case of small iron concentrations and irreversibly for high iron concentrations. Since marker experiments using gold and platinum diffusion show a high vacancy concentration after AlG a tentative identification of the new defect as the metastable iron-vacancy pair is proposed.

36 MATERIALS SCIENCE↗

Role of point defects in stress-induced martensite transformations in NiTi shape memory alloys: A molecular dynamics study

Shape-memory properties of equiatomic NiTi rely on the thermal- or stress-induced reversible martensitic phase transformation between the $\textit{B}$2 and $\textit{B}$19' phases. Irradiation defects suppress thermal-induced transformations, but their effects on stress-induced transformations are poorly understood. In this work, we use molecular dynamics to investigate the effect of vacancies, vacancy clusters, interstitials, and antisite defects on stress-induced transformations. All defects suppress the transformation, but vacancy clusters do so to the greatest extent, while antisite defects do so to the least extent. The responsible mechanisms are grain boundary pinning and chemical disordering.

36 MATERIALS SCIENCE↗

Oxygen potential measurement and point defect chemistry of UO{sub 2}

Many studies on the oxygen potential of UO{sub 2} have been carried out so far. However, the oxygen potential data for UO{sub 2} near the stoichiometric composition in the high temperature region (1673-1873 K) are limited. Recently, Kato's group had investigated oxygen potential of (U, Pu)O{sub 2} as functions of Pu content, oxygen-to-metal (O/M) ratio and temperature. They evaluated the data based on defect chemistry. The UO{sub 2} data are fundamental to evaluate oxygen potential in UO{sub 2}-PuO{sub 2} solid solution. In this work, the oxygen potential data of UO{sub 2+x} were extended to the high temperature range of 1673-1873 K by gas equilibrium method. The measured data were analyzed based on a defect chemistry model. Kroeger-Vink's diagram were obtained in UO{sub 2+x}. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generation and excitation of point defects in silica by synchrotron radiation above the absorption edge

We report photoluminescence measurements carried out on amorphous SiO{sub 2} upon excitation by synchrotron light. Exposure of the as-grown material to above-edge light at low temperature induces the formation of nonbridging oxygen hole centers (NBOHC), localized in a thin layer below the surface limited by the penetration depth (tens of nm) of impinging light. After concluding the exposure to 11 eV light, stable defects are revealed by observing their characteristic 1.9 eV photoemission band excited at 4. 8eV. The local concentration of induced defects, supposedly formed by nonradiative decay of excitons, is very high (close to approx10{sup 21} cm{sup -3}) and independent of the previous history of the material. On the other side, we also observe the 1.9 eV emission upon excitation between 9 and 14 eV, accompanied by the 2.5 eV luminescence ascribed to self-trapped excitons. This 1.9 eV band exhibits a temperature dependence different from that measured by excitation within the absorption bands at 4.8 and 6.4eV of NBOHC, and is proposed to arise from the fact that NBOHC are generated by above-edge light in their excited electronic state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Point defect distribution in high-mobility conductive SrTiO{sub 3} crystals

We have carried out positron-annihilation spectroscopy to characterize the spatial distribution and the nature of vacancy defects in insulating as-received as well as in reduced SrTiO{sub 3} substrates exhibiting high-mobility conduction. The substrates were reduced either by ion etching the substrate surfaces or by doping with vacancies during thin-film deposition at low pressure and high temperature. We show that Ti vacancies are native defects homogeneously distributed in as-received substrates. In contrast, the dominant vacancy defects are the same both in ion etched crystals and substrates reduced during the film growth, and they consist of nonhomogeneous distributions of cation-oxygen vacancy complexes. Their spatial extension is tuned from a few microns in ion-etched samples to the whole substrate in specimens reduced during film deposition. Our results shed light on the transport mechanisms of conductive SrTiO{sub 3} crystals and on strategies for defect-engineered oxide quantum wells, wires, and dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robust Multicolor Single Photon Emission from Point Defects in Hexagonal Boron Nitride

Hexagonal boron nitride (hBN) is an emerging two-dimensional material for quantum photonics owing to its large bandgap and hyperbolic properties. We report two approaches for engineering quantum emitters in hBN multilayers using either electron beam irradiation or annealing and characterize their photophysical properties. The defects exhibit a broad range of multicolor room-temperature single photon emissions across the visible and the near-infrared spectral ranges, narrow line widths of sub-10 nm at room temperature, and a short excited-state lifetime, and high brightness. We show that the emitters can be categorized into two general groups, but most likely possess similar crystallographic structure. Remarkably, the emitters are extremely robust and withstand aggressive annealing treatments in oxidizing and reducing environments. Our results constitute a step toward deterministic engineering of single emitters in 2D materials and hold great promise for the use of defects in boron nitride as sources for quantum information processing and nanophotonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Migration of point defects and a defect pair in zinc oxide using the dimer method

The migration mechanism and the minimum energy path of vacancies, interstitials and an interstitial-vacancy pair in zinc oxide have been studied by the dimer method. The in-plane and out-of-plane migrations of zinc and oxygen vacancies are found to be anisotropic. The kick-out mechanism is energetically preferred to zinc and oxygen interstitials that can easily migrate through the ZnO crystal lattice. In addition, the migration process of an interstitial-vacancy pair as a complex of an octahedral oxygen interstitial and a zinc vacancy is dominated by an oxygen interstitial/zinc vacancy successive migration. The energy barriers indicate that the existence of oxygen interstitial in the defect pair can promote the mobility of zinc vacancy, whereas the migration of oxygen interstitial is slowed down due to the presence of zinc vacancy. In the end, we show a possible migration path of the interstitial-vacancy pair that can be dissociated through a set of displacement movements.

Computer simulations↗

Physicochemical characterization of point defects in fluorine doped tin oxide films

The physical and chemical properties of spray deposited FTO films are studied using FESEM, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), electrical and optical measurements. The results of XRD measurements showed that the films are polycrystalline (grain size 20-50 nm) with Rutile structure and mixed preferred orientation along the (200) and (110) planes. An angular shift of the XRD peaks after F-doping is observed and interpreted as being due to the formation of substitutional fluorine defects (F{sub O}) in presence of high concentration of oxygen vacancies (V{sub O}) that are electrically neutral. The electrical neutrality of oxygen vacancies is supported by the observation that the electron concentration n is two orders of magnitude lower than the V{sub O} concentration calculated from chemical analyses using XPS measurements. It is shown that an agreement between XPS, XRD, and Hall effect results is possible provided that the degree of deviation from stoichiometry is calculated with the assumption that the major part of the bulk carbon content is involved in O-C bonds. High temperature thermal annealing is found to cause an increase in the F{sub O} concentration and a decrease in both n and V{sub O} concentrations with the increase of the annealing temperature. These results could be interpreted in terms of a high temperature chemical exchange reaction between the SnO{sub 2} matrix and a precipitated fluoride phase. In this reaction, fluorine is released to the matrix and Sn is trapped by the fluoride phase, thus creating substitutional fluorine F{sub O} and tin vacancy V{sub Sn} defects. The enthalpy of this reaction is determined to be approximately 2.4 eV while the energy of formation of a V{sub Sn} through the migration of Sn{sub Sn} host atom to the fluoride phase is approximately 0.45 eV.

36 MATERIALS SCIENCE↗

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni 3 Al-based γ' phase

The ordered L1 2 γ' Ni 3 Al intermetallic inclusions are routinely used as strengthening constituents in Ni-based superalloys and recent high-entropy alloys. As there are different metallic elements relative to the alloy matrix, the composition of γ' phase inclusions usually suffers some variations. In this work, we studied the elemental partition and its influence on atomic transport properties in a model (NiCo) 3 Al γ' phase with chemical and structural disorder. Combining the Monte Carlo and molecular static techniques, we first determined the elemental distribution in such compositionally-complexed γ' phase. The results suggest that Co tends to segregate, which profoundly influences defect energetics and diffusion properties. By modeling thermally activated diffusion by molecular dynamics, we found that chemical disorder induced by Co can enhance vacancy diffusion while significantly suppress diffusion via interstitial atom migration, as compared to the stoichiometric γ' Ni 3 Al. We further reveal that these observations are closely related to the defect energetics in these systems. Furthermore, our results explain the effects of disorder, long- and short-range orders on the diffusion properties in multicomponent intermetallic alloys, which helps to understand the stability and, thus, γ'-phase-assisted strengthening at different conditions including annealing and irradiation.

36 MATERIALS SCIENCE↗

Site-Selective Atomic Layer Deposition on Rutile TiO 2 : Selective Hydration as a Route to Target Point Defects

Routes to area-and especially site-selective atomic layer deposition (ALD) remain an enticing challenge in precision surface science, despite the potentially game-changing capability for many energy applications. An unparalleled level of surface reaction control is required to direct ALD to select sites on the same nominal material, for example, targeted growth on distinct phases, facets, step-edges, and/or defects. However, as a sequential surface synthesis method, ALD is uniquely suited to these challenges, including the possibility of selective deposition at defective surface atom arrangements. Here, we computationally identify conditions for site-selective ALD through hydration of surface defects, including oxygen vacancies and titanium interstitials on low-index rutile TiO 2 facets. First-principles computation is used to predict, as a function of temperature, the hydroxylation of defects that are targeted by proton-exchange-mediated ALD processes. In situ ellipsometric measurements of ALD Al 2 O 3 nucleation on TiO 2 (110) single crystals prepared with and without abundant oxygen vacancies demonstrate striking contrast, corroborating computational predictions and revealing a mechanistically clear path to site-selective ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗